Got my box on the 18th. Thanks kinruan!
I ordered a pack of 100, and received 101 whites + 1 red cover. 7 covers had one bent leg, 1 cover had two bent legs with one of them having a small crack. Most switch covers could be bent back without damage, but some that were bent back had a tiny dent at the top of the switch housing. Also received 1 switch cover that was completely missing a leg, and it's no where to be found in the bag so I assume it was already broken. Most of the bent leg switch covers were on the top left of cover, where the break-off point of the mold are.
Also another note, most of the switch covers had an extra tiny bit of plastic at the bottom end of the top left leg where the molds were broken off of. (Molds were broken off on the side, but there's a tiny bit of plastic residue at the bottom). Just take a nail clipper or some flush cutters and trim it off if you're picky.
I believe there was also 2 or 3 covers that had a nipple on the underside of the cap under the "abostudio" logo. Take a nail clipper or flush cutters and trim those off too.
Overall happy with the results. The covers also seem to be just a tad tighter & snugger fit than the stock cherry one...or I may have played a bit too much with my Ducky keychain switch