« previous next »
Pages:  [1]     Go Down

Author Topic: ISO and ANSI  (Read 1342 times)

0 Members and 1 Guest are viewing this topic.

Offline spaceburge

  • Thread Starter
  • Posts: 11
  • Location: UK
ISO and ANSI
« on: Sun, 11 August 2013, 10:28:27 »
Now I've come to realise something being a Brit in this keyboard world. ISO is almost a complete pain to own.

Keycaps are harder to come by, keyboards are harder to come by. Everything in general is just a complete pain.

Should I contact switch to ANSI and stay with it making this keyboard hobby of mine a lot easier?

Stupid, open ended question I know but the range of ISO keyboards is so limited it seems daft to pursue it.

Thanks for your opinions
Logged

Offline lcs

  • Lover of Grape Drank
  • Posts: 669
  • Location: Brazil
  • はやく
Re: ISO and ANSI
« Reply #1 on: Sun, 11 August 2013, 10:29:59 »
In Brazil we also use ISO. I hate it. That big enter key is horrible :P

I recommend the switch.
Logged

Offline gigibecali

  • Posts: 162
  • Location: .ro
Re: ISO and ANSI
« Reply #2 on: Sun, 11 August 2013, 10:54:39 »
Easy one.

If you're serious about this new hobby of yours, switch to ANSI.
Oh... and start saving money right now. :)

If you stick to ISO then everything will just die naturally.
At some point your brain will overcome frustration and make you stop.
Logged
IBM M - UK  |  QFR reds  |  QFR blacks  |  HPE 87 browns  |  HPE 87 blues

Offline spaceburge

  • Thread Starter
  • Posts: 11
  • Location: UK
Re: ISO and ANSI
« Reply #3 on: Sun, 11 August 2013, 10:58:28 »
Thanks folks.

Time to make that RMA up with the Keyboard Co for my Filco then!

Ha, yes I have seen how this can really munch away on cash. Just the price of the HHKB and the Realforce boards made me weep a little!
Logged

Offline lcs

  • Lover of Grape Drank
  • Posts: 669
  • Location: Brazil
  • はやく
Re: ISO and ANSI
« Reply #4 on: Sun, 11 August 2013, 11:03:58 »
Going for the Topre boards already?  :eek:
Logged

Offline Game Theory

  • Posts: 200
  • Location: Madison WI
Re: ISO and ANSI
« Reply #5 on: Sun, 11 August 2013, 11:07:39 »
Keyboard Co also has ANSI.
Logged
... he's just a poor kid from the stupid ages.
Realforce 104UG | Realforce 91U | IBM SSK | IBM 5251 BeamSpring | IBM Model F XT |  IBM Model F AT | IBM SSK | Filco Majestouch 2 TKL (MX Blue) | KMAC LE (MX Green)| Northgate Omni Key 101 | Avant Stellar Prime

Offline davkol

  •  Post Editing Timeout
  • Posts: 4994
Re: ISO and ANSI
« Reply #6 on: Sun, 11 August 2013, 11:17:07 »
You just need an ergodox...
Logged

Offline spaceburge

  • Thread Starter
  • Posts: 11
  • Location: UK
Re: ISO and ANSI
« Reply #7 on: Sun, 11 August 2013, 11:25:36 »
Quote from: lcs on Sun, 11 August 2013, 11:03:58
Going for the Topre boards already?  :eek:

No, not yet but I'd really like the HHKB to take with me rather than using my portable's keyboard!
Logged

Offline spaceburge

  • Thread Starter
  • Posts: 11
  • Location: UK
Re: ISO and ANSI
« Reply #8 on: Sun, 11 August 2013, 11:39:02 »
Anyway that's it. RMA sent. Opinions listened to! Thanks
Logged

Offline czarek

  • Posts: 627
  • Location: Poland
  • Keep the momentum going!
    • FalbaTech
Re: ISO and ANSI
« Reply #9 on: Sun, 11 August 2013, 14:55:26 »
In Poland it was always mixture of German based ISO layout (Polish typewriter's QWERTZ layout) and ANSI (similar to other eastern block countries - Polish Programmers QWERTY layout). I used both over the years without even paying attention, but since I started paying attention and using quality keyboards, I prefer ANSI layout. It is easier to come by and it somehow feels more ergonomic to me.
Logged
My little ErgoDox / GH60 factory: http://falbatech.pl

Offline Moosecraft

  • HHKB Pro
  • Posts: 734
  • Location: Sweden
Re: ISO and ANSI
« Reply #10 on: Sun, 11 August 2013, 15:04:18 »
I use both layouts and tbh it's not that big of a switch if you know how to touch type.
Logged
I am bigfatmc over at other places!

Offline TheQsanity

  • Posts: 1165
  • SmallFry Lovin'
Re: ISO and ANSI
« Reply #11 on: Sun, 11 August 2013, 15:12:27 »
When I was a kid we had an ISO keyboard around in the house. When we got an ANSI keyboard, I thought the ISO was old and ugly. ANSI was slim and cool :cool:.
ISO with small backspace is really annoying to me :P
Logged
SmallFry! <3

Offline Photekq

  • wheat flour zone
  • Posts: 4794
  • Location: North Wales, UK
  • sorry if i was ever an ******* to you
Re: ISO and ANSI
« Reply #12 on: Sun, 11 August 2013, 15:38:31 »
I switched to ANSI.. However, there are very nice ISO keysets to be had. There are a lot of original Cherry doubleshot and dyesub keysets in ISO.
Logged
https://kbdarchive.org/
github
discord: hi mum#5710

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: ISO and ANSI
« Reply #13 on: Sun, 11 August 2013, 17:01:26 »
Do you miss out on any extra keys going from ISO to ANSI?
Logged
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline Moosecraft

  • HHKB Pro
  • Posts: 734
  • Location: Sweden
Re: ISO and ANSI
« Reply #14 on: Sun, 11 August 2013, 17:10:54 »
1 key next to the shift which sometimes does bother me a little bit.
Logged
I am bigfatmc over at other places!
Pages:  [1]     Go Up
« previous next »