Author Topic: ComradeSniper's Thread (Read 7551 times)

ComradeSniper · « **on:** Sat, 31 August 2013, 01:46:34 »

Sold most stuff, going to close this thread and re open a new one for the sake of neatness.

jdcarpe · « **Reply #1 on:** Wed, 04 September 2013, 18:55:21 »

Hmmm...

But you don't have anything comparable to trade?

ComradeSniper · « **Reply #2 on:** Wed, 04 September 2013, 19:31:07 »

Quote from: jdcarpe on Wed, 04 September 2013, 18:55:21

Hmmm...

But you don't have anything comparable to trade?

I'm afraid not

ComradeSniper · « **Reply #3 on:** Thu, 10 October 2013, 23:38:20 »

Cleaned up the thread and added a new board to the OP. Also, it just occurred to me that two keyboards should fit fine in a flat rate game board box so if you buy one keyboard then any other keyboard is $15 off.

ComradeSniper · « **Reply #4 on:** Fri, 11 October 2013, 22:30:57 »

ComradeSniper · « **Reply #5 on:** Sat, 12 October 2013, 20:51:33 »

Added Poker X w/ reds and Vintage MX blues.

ComradeSniper · « **Reply #6 on:** Sun, 13 October 2013, 13:20:48 »

Please excuse the early bump; added more things.

ComradeSniper · « **Reply #7 on:** Sun, 13 October 2013, 14:32:23 »

Raindrop set is sold!

Amble · « **Reply #8 on:** Sun, 13 October 2013, 14:51:27 »

Welcome to the dark side that is Topre.

absyrd · « **Reply #9 on:** Sun, 13 October 2013, 15:01:25 »

Hmmm... my kb7000 (which yours definitely is) is a little beat up. Perhaps I should make an offer...

ComradeSniper · « **Reply #10 on:** Sun, 13 October 2013, 16:34:51 »

Quote from: absyrd on Sun, 13 October 2013, 15:01:25

Hmmm... my kb7000 (which yours definitely is) is a little beat up. Perhaps I should make an offer...

You should!

ComradeSniper · « **Reply #11 on:** Sun, 13 October 2013, 21:59:32 »

Poker is sold!

ComradeSniper · « **Reply #12 on:** Mon, 14 October 2013, 21:15:56 »

ComradeSniper · « **Reply #13 on:** Tue, 15 October 2013, 23:05:11 »

ComradeSniper · « **Reply #14 on:** Wed, 16 October 2013, 19:59:57 »

Added some novelty caps.

jonathanyu · « **Reply #15 on:** Wed, 16 October 2013, 20:13:41 »

saturnotaku · « **Reply #16 on:** Wed, 16 October 2013, 20:17:16 »

PM sent for some of said novelty caps.

do_Og@n · « **Reply #17 on:** Wed, 16 October 2013, 23:19:40 »

That's a good price on that Filco...tempted.

zenuty · « **Reply #18 on:** Wed, 16 October 2013, 23:30:35 »

ComradeSniper · « **Reply #19 on:** Thu, 17 October 2013, 00:07:34 »

Hack Orange MX clack traded, and some of the novelty keycaps as well as the Filco sold. OP updated accordingly.

ComradeSniper · « **Reply #20 on:** Sat, 19 October 2013, 19:58:45 »

Bump.

ComradeSniper · « **Reply #21 on:** Wed, 23 October 2013, 17:56:52 »

Price lowered on Vintage Blues, title updated in a shameless attempt to attract attention.

ComradeSniper · « **Reply #22 on:** Thu, 24 October 2013, 17:23:40 »

ComradeSniper · « **Reply #23 on:** Fri, 25 October 2013, 16:37:21 »

Added GH60 plate and costar stab set.

ComradeSniper · « **Reply #24 on:** Sat, 26 October 2013, 20:05:02 »

ComradeSniper · « **Reply #25 on:** Tue, 29 October 2013, 17:53:08 »

ComradeSniper · « **Reply #26 on:** Fri, 01 November 2013, 12:11:15 »

gh_pp · « **Reply #27 on:** Fri, 01 November 2013, 12:40:10 »

Quote from: ComradeSniper on Sat, 31 August 2013, 01:46:34

Would like to sell this Fujitsu FKB-4725 with Peerless switch (spring over rubber dome). Model M keycaps fit on it, but its keycaps do not fit on the Model M. Seems to function perfectly. This one has an AT connector. Really interesting board, but I can't stand the feel of the switches so I know this is only going to sit in my closet and gather dust.

I'd like $25 shipped for this one.

Just curious. What method do you use to ship this keyboard and how much would that cost? It's huge and heavy.

Thanks

whiskytango · « **Reply #28 on:** Fri, 01 November 2013, 12:50:13 »

Already dumping the vintage blues?

If it helps, I can comment on their provenance: jdcarpe desoldered them from a Dolch and traded them to me. I never used them and traded them to ComradeSniper.

GLWS! Good guy to deal with

ComradeSniper · « **Reply #29 on:** Fri, 01 November 2013, 13:25:18 »

Quote from: whiskytango on Fri, 01 November 2013, 12:50:13

Already dumping the vintage blues?

If it helps, I can comment on their provenance: jdcarpe desoldered them from a Dolch and traded them to me. I never used them and traded them to ComradeSniper.

GLWS! Good guy to deal with

I really like them, but Topre blew every MX switch I've tried out of the water. It was a tough decision but I ultimately decided to fully convert to Topre.

Quote from: gh_pp on Fri, 01 November 2013, 12:40:10

Quote from: ComradeSniper on Sat, 31 August 2013, 01:46:34

Would like to sell this Fujitsu FKB-4725 with Peerless switch (spring over rubber dome). Model M keycaps fit on it, but its keycaps do not fit on the Model M. Seems to function perfectly. This one has an AT connector. Really interesting board, but I can't stand the feel of the switches so I know this is only going to sit in my closet and gather dust.

I'd like $25 shipped for this one.

Just curious. What method do you use to ship this keyboard and how much would that cost? It's huge and heavy.

Thanks

I ship keyboards via USPS Priority large flat rate game board box. It runs about $15 if you print the label online. Shipping is already included in the price on my listing.

ComradeSniper · « **Reply #30 on:** Mon, 04 November 2013, 21:31:25 »

GH60 stuff sold. Added a price for the ergo alps board based off of what Binge is asking for his.

ComradeSniper · « **Reply #31 on:** Thu, 07 November 2013, 22:38:53 »

ComradeSniper · « **Reply #32 on:** Thu, 14 November 2013, 23:06:44 »

ComradeSniper · « **Reply #33 on:** Sat, 16 November 2013, 12:35:27 »

Would really like to get this stuff moving, feel free to send me offers.

ComradeSniper · « **Reply #34 on:** Mon, 25 November 2013, 01:39:33 »

Price dropped on Chicony ergo kb and vintage blues.

ComradeSniper · « **Reply #35 on:** Sat, 30 November 2013, 14:41:05 »

Bump, new things.

ComradeSniper · « **Reply #36 on:** Sun, 01 December 2013, 14:20:47 »

ComradeSniper · « **Reply #37 on:** Mon, 02 December 2013, 21:23:17 »

ComradeSniper · « **Reply #38 on:** Wed, 04 December 2013, 14:25:37 »

ComradeSniper · « **Reply #39 on:** Thu, 05 December 2013, 17:09:11 »

ComradeSniper · « **Reply #40 on:** Sun, 08 December 2013, 14:49:23 »

ComradeSniper · « **Reply #41 on:** Fri, 20 December 2013, 16:11:12 »

crunch · « **Reply #42 on:** Sat, 21 December 2013, 14:02:15 »

Hello!
What would it cost to ship the NMB keyboard to Sweden.

ComradeSniper · « **Reply #43 on:** Sat, 21 December 2013, 14:29:38 »

Quote from: crunch on Sat, 21 December 2013, 14:02:15

Hello!
What would it cost to ship the NMB keyboard to Sweden.

The lowest price I can calculate is about $60

crunch · « **Reply #44 on:** Sat, 21 December 2013, 15:02:54 »

Ouch that was expensive.

News:

Author Topic: ComradeSniper's Thread (Read 7551 times)