Author Topic: [WTS] - A87 PCB + Poker Plate + Option to add switch tools (Read 15219 times)

The_Beast · « **on:** Mon, 06 January 2014, 21:01:02 »

Want To Sell (Qualifies for switch tool deal):

Buy any of the items below and you qualify to add switch tools to your order for an additional $13
A87 PCB with Full LED support - $75
Through hole diodes and SMD resistors soldered on. Ready for switches and LEDS

Gunnar Optiks - $35

Gray unprinted bulking spring cap set - $20

Want To Sell (Does not qualify for switch tool deal):

Center stemmed stepped caps lock - $6

#1 Gone
#2 Gone
#7 Gone

Cherry Plate Mount Stabilizers 2x - 25 sets available - $0.50

riotonthebay · « **Reply #1 on:** Mon, 06 January 2014, 21:07:20 »

I was so close to buying those dyesubs for that CODE key… but I just bought so much Dolch… can't buy more keysets…

GLWS!

SpAmRaY · « **Reply #2 on:** Mon, 06 January 2014, 21:13:45 »

Just for clarity the

Phantom PCB - $55
This has the diodes soldered on (has been checked to make sure the rows/columns work). Ready for switches and teensy

Also needs a plate to use switches right?

The_Beast · « **Reply #3 on:** Mon, 06 January 2014, 21:15:45 »

Quote from: SpAmRaY on Mon, 06 January 2014, 21:13:45

Just for clarity the

Phantom PCB - $55
This has the diodes soldered on (has been checked to make sure the rows/columns work). Ready for switches and teensy

Also needs a plate to use switches right?

Plate, stabilizers, switches and a teensy (which I have, but it isn't soldered on)

terran5992 · « **Reply #4 on:** Mon, 06 January 2014, 21:48:07 »

Might be intrested in the costar stabs

Neo.X · « **Reply #5 on:** Mon, 06 January 2014, 22:11:23 »

PMed fo the cherry keysets

GLWS

The_Beast · « **Reply #6 on:** Tue, 07 January 2014, 14:20:40 »

Dye sub set is gone!

The_Beast · « **Reply #7 on:** Wed, 08 January 2014, 21:08:25 »

CommonCurt · « **Reply #8 on:** Wed, 08 January 2014, 21:14:46 »

I'll take the 1.25 RGB set and the off white center stem caps lock with black font. PM'd

kmiller8 · « **Reply #9 on:** Wed, 08 January 2014, 21:15:45 »

CommonCurt · « **Reply #10 on:** Wed, 08 January 2014, 21:17:46 »

Quote from: kmiller8 on Wed, 08 January 2014, 21:15:45

Show Image

Very cool looking puppies :)

kmiller8 · « **Reply #11 on:** Wed, 08 January 2014, 21:22:41 »

Quote from: CommonCurt on Wed, 08 January 2014, 21:17:46

Very cool looking puppies

husky puppies are so cute

CommonCurt · « **Reply #12 on:** Wed, 08 January 2014, 21:30:58 »

Quote from: kmiller8 on Wed, 08 January 2014, 21:22:41

Quote from: CommonCurt on Wed, 08 January 2014, 21:17:46
Very cool looking puppies

husky puppies are so cute

Show Image

Man that is a lot of puppies. Are they yours?

kmiller8 · « **Reply #13 on:** Wed, 08 January 2014, 21:32:27 »

Quote from: CommonCurt on Wed, 08 January 2014, 21:30:58

Man that is a lot of puppies. Are they yours?

My parent's are breeders, it's always fun to head to their house when they have a ****ton of puppies and just roll around in them.

CommonCurt · « **Reply #14 on:** Wed, 08 January 2014, 21:35:05 »

Quote from: kmiller8 on Wed, 08 January 2014, 21:32:27

Quote from: CommonCurt on Wed, 08 January 2014, 21:30:58
Man that is a lot of puppies. Are they yours?

My parent's are breeders, it's always fun to head to their house when they have a ****ton of puppies and just roll around in them.

Very cool.

SpAmRaY · « **Reply #15 on:** Wed, 08 January 2014, 21:50:12 »

Quote from: kmiller8 on Wed, 08 January 2014, 21:32:27

Quote from: CommonCurt on Wed, 08 January 2014, 21:30:58
Man that is a lot of puppies. Are they yours?

My parent's are breeders, it's always fun to head to their house when they have a ****ton of puppies and just roll around in them.

So you saying your the result of a puppy mill?

seems legit

The_Beast · « **Reply #16 on:** Wed, 08 January 2014, 21:51:56 »

Quote from: kmiller8 on Wed, 08 January 2014, 21:15:45

Show Image

I like the one in the middle. Is he potty trained?

The_Beast · « **Reply #17 on:** Wed, 08 January 2014, 22:16:08 »

PBT RGB ANSI125 set, hazard, and #1 of the stepped caps locks are gone

keymaster · « **Reply #18 on:** Wed, 08 January 2014, 22:17:35 »

1x costar stabilizer pls

lilky · « **Reply #19 on:** Thu, 09 January 2014, 00:07:08 »

PM'd, no reply....

baldgye · « **Reply #20 on:** Thu, 09 January 2014, 04:11:52 »

What layouts does the phantom pcb you have support? And is it tkl size?

Sorry if these are dumb questions I had to pull out of the phantom GB last year

The_Beast · « **Reply #21 on:** Thu, 09 January 2014, 07:20:58 »

Quote from: baldgye on Thu, 09 January 2014, 04:11:52

What layouts does the phantom pcb you have support? And is it tkl size?

Sorry if these are dumb questions I had to pull out of the phantom GB last year

Here's a spreadsheet with all the plates that should work with the phantom:
https://docs.google.com/spreadsheet/ccc?key=0AqlitOjHvRzCdG9Qc0xDb3dVV3RUd3g1dDdRWTlET3c&usp=sharing#gid=0

The_Beast · « **Reply #22 on:** Fri, 10 January 2014, 07:42:13 »

kmiller8 · « **Reply #23 on:** Fri, 10 January 2014, 15:58:25 »

kmiller8 · « **Reply #24 on:** Fri, 10 January 2014, 16:14:33 »

This is now a pug thread.

swill · « **Reply #25 on:** Fri, 10 January 2014, 21:08:09 »

Quote from: kmiller8 on Fri, 10 January 2014, 16:14:33

Show Image

This is now a pug thread.

Livin' the pug life...

The_Beast · « **Reply #26 on:** Sat, 11 January 2014, 20:07:23 »

swill · « **Reply #27 on:** Sat, 11 January 2014, 20:13:46 »

Quote from: The_Beast on Sat, 11 January 2014, 20:07:23

Show Image

That little guy is awesome. :)

The_Beast · « **Reply #28 on:** Sun, 12 January 2014, 12:24:16 »

The_Beast · « **Reply #29 on:** Mon, 13 January 2014, 20:15:43 »

The_Beast · « **Reply #30 on:** Tue, 14 January 2014, 17:01:51 »

The_Beast · « **Reply #31 on:** Thu, 16 January 2014, 18:50:57 »

korrelate · « **Reply #32 on:** Thu, 16 January 2014, 20:59:59 »

Hey Beast,

Couple of questions:
- A87 needs a teensy controller, right?
- Pics?
- You have a plate to ride along/also for sale, etc?

Cheers,

K

The_Beast · « **Reply #33 on:** Thu, 16 January 2014, 21:20:50 »

Quote from: korrelate on Thu, 16 January 2014, 20:59:59

Hey Beast,

Couple of questions:
- A87 needs a teensy controller, right?
- Pics?
- You have a plate to ride along/also for sale, etc?

Cheers,

K

The A87 has the controller SMD soldered onto the PCB.

I don't have a plate for it. I was going to do a custom case/plate, but never got around to it

Proc31 · « **Reply #34 on:** Fri, 17 January 2014, 07:01:23 »

The_Beast · « **Reply #35 on:** Fri, 17 January 2014, 18:58:50 »

The_Beast · « **Reply #36 on:** Sat, 18 January 2014, 11:39:02 »

Phantom sold!

The_Beast · « **Reply #37 on:** Sun, 19 January 2014, 22:08:20 »

dragonxx21 · « **Reply #38 on:** Mon, 20 January 2014, 00:02:17 »

Could you just sell me the switch tools?

The_Beast · « **Reply #39 on:** Mon, 20 January 2014, 00:59:34 »

Quote from: dragonxx21 on Mon, 20 January 2014, 00:02:17

Could you just sell me the switch tools?

Sure, with the purchase of one of the qualifying items.

CommonCurt · « **Reply #40 on:** Wed, 22 January 2014, 23:41:40 »

Got my stuff today. Thanks man

The_Beast · « **Reply #41 on:** Thu, 23 January 2014, 18:48:28 »

kmiller8 · « **Reply #42 on:** Fri, 24 January 2014, 11:04:02 »

The_Beast · « **Reply #43 on:** Tue, 18 February 2014, 19:14:19 »

hydrospell · « **Reply #44 on:** Tue, 18 February 2014, 20:07:59 »

Do you ship to singapore? Looking at caps lock #2 and #7.

The_Beast · « **Reply #45 on:** Tue, 18 February 2014, 20:20:57 »

Quote from: hydrospell on Tue, 18 February 2014, 20:07:59

Do you ship to singapore? Looking at caps lock #2 and #7.

Sure, just pay shipping there

hydrospell · « **Reply #46 on:** Tue, 18 February 2014, 20:47:29 »

Cool, PMed.

exitfire401 · « **Reply #47 on:** Wed, 19 February 2014, 19:32:33 »

Is the plate stainless, or aluminum?

Photoelectric · « **Reply #48 on:** Wed, 19 February 2014, 19:34:10 »

Looks like brushed stainless steel to me in appearance.

The_Beast · « **Reply #49 on:** Wed, 19 February 2014, 20:13:11 »

Quote from: exitfire401 on Wed, 19 February 2014, 19:32:33

Is the plate stainless, or aluminum?

Yup, hand sanded stainless steel

News:

Author Topic: [WTS] - A87 PCB + Poker Plate + Option to add switch tools (Read 15219 times)