« previous next »
Pages:  [1]     Go Down

Author Topic: Phantom keyboard building progress and toughts.  (Read 4387 times)

0 Members and 1 Guest are viewing this topic.

Offline zeroni13

  • Thread Starter
  • Posts: 97
  • Location: Oslo, Norway
Phantom keyboard building progress and toughts.
« on: Tue, 29 April 2014, 15:36:28 »
Hello GH! I just wanted to share some pictures of my Phantom keyboard that I build.
Please let me know what you think about it!

Soldering diodes.

More diodes.

Soldering switches.

Switches done, starting to add keycaps.

Keycaps done. Titanfall eject keycap from mindfulmachine, thank you!

Underside of PCB.

Fitting it in the case, I had to file the edges of the plate to get it to fit properly.

Custom USB cable from MimicCables, using Sugru to keep it in place.

Spring swapping from standard 60g to Sprit's gold plated 85g, I ****ing love those, thank you!

Finished product!

I'm really pleased with how it turned out, it cost me a huge amount of money and took a very long time to put together.
I'm using Hasu's TMK firmware and I love how easy it is to use and how feature-full it is!
All keys are MX black with 85g springs except for escape which is a standard MX blue because I love the clicky sound.

Please post your thoughts or ask me any questions if you have any! Thank you!
Logged
Phantom with Silver Vortex Case   Keychron Q6 Pro ISO Knob
                               

Offline blackbox

  • Posts: 725
Re: Phantom keyboard building progress and toughts.
« Reply #1 on: Tue, 29 April 2014, 15:55:28 »
Very thorough buildt. Too bad you couldn't get the black case.
Logged
Keyboards: Dell AT102W (matias standard clicky), Maltron two-hand 3D fully ergonomic keyboard (Vintage MX Black). CM QF XT (MX Grey) IBM model M

The LAN table!
http://geekhack.org/index.php?topic=62536.0

Offline zeroni13

  • Thread Starter
  • Posts: 97
  • Location: Oslo, Norway
Re: Phantom keyboard building progress and toughts.
« Reply #2 on: Tue, 29 April 2014, 16:14:52 »
Quote from: blackbox on Tue, 29 April 2014, 15:55:28
Very thorough buildt. Too bad you couldn't get the black case.
Yup, doesn't look bad like this either though.
Logged
Phantom with Silver Vortex Case   Keychron Q6 Pro ISO Knob
                               

Offline Candyflip

  • Posts: 473
  • Location: Skopje, Macedonia
  • ★★★
Re: Phantom keyboard building progress and toughts.
« Reply #3 on: Tue, 29 April 2014, 16:18:49 »
Great build! When my financial situation gets better I am building a similar one myself. So heavy springs though :eek:
Logged
This sucks more than anything that has ever sucked before.

Offline duq

  • Posts: 288
  • Location: West Coast
  • Connoisseur
Re: Phantom keyboard building progress and toughts.
« Reply #4 on: Tue, 29 April 2014, 16:23:41 »
Great job. Question though... is that  vortex case? How are you holding it up with that plate?
Logged

Offline zeroni13

  • Thread Starter
  • Posts: 97
  • Location: Oslo, Norway
Re: Phantom keyboard building progress and toughts.
« Reply #5 on: Tue, 29 April 2014, 16:26:03 »
Quote from: Candyflip on Tue, 29 April 2014, 16:18:49
Great build! When my financial situation gets better I am building a similar one myself. So heavy springs though :eek:
Thanks, good luck on your keyboard when you get the chance, make sure to make a list of items and find out how much the total will be. I used about 40% more than expected. And yeah I love heavy switches, they just feel so smooth and comfy.

Quote from: duq on Tue, 29 April 2014, 16:23:41
Great job. Question though... is that  vortex case? How are you holding it up with that plate?
Yes that is a Vortex, I'm guilty of using Sugru around the edge to hold the plate tight.
« Last Edit: Tue, 29 April 2014, 16:28:48 by zeroni13 »
Logged
Phantom with Silver Vortex Case   Keychron Q6 Pro ISO Knob
                               

Offline blackbox

  • Posts: 725
Re: Phantom keyboard building progress and toughts.
« Reply #6 on: Thu, 01 May 2014, 15:18:12 »
Which pattern did you use on your usb cable from mimic cables?
Logged
Keyboards: Dell AT102W (matias standard clicky), Maltron two-hand 3D fully ergonomic keyboard (Vintage MX Black). CM QF XT (MX Grey) IBM model M

The LAN table!
http://geekhack.org/index.php?topic=62536.0

Offline zeroni13

  • Thread Starter
  • Posts: 97
  • Location: Oslo, Norway
Re: Phantom keyboard building progress and toughts.
« Reply #7 on: Thu, 01 May 2014, 15:26:32 »
Quote from: blackbox on Thu, 01 May 2014, 15:18:12
Which pattern did you use on your usb cable from mimic cables?
Red Camo, would have looked better on the black case I originally wanted, but oh well.
Logged
Phantom with Silver Vortex Case   Keychron Q6 Pro ISO Knob
                               

Offline strict

  • TKL Zealot
  • Posts: 1921
  • Location: PA
Re: Phantom keyboard building progress and toughts.
« Reply #8 on: Thu, 01 May 2014, 16:18:59 »
Nice looking board! I didnt see it mentioned, do you use a stainless steel or aluminum plate?
Logged

Realforce EK45 (Silenced)  |  Realforce 87UW (45g)  |  Realforce 87UWS (Variable)
Filco MJ2 TKL (Cherry Clears)  |  Phantom 87 (78g Gateron Clears)  |  Phantom 86 (67g Zealios)

Offline quochung1989

  • Vintage Cherry Collector
  • Posts: 1187
  • Location: Ebay heaven.
  • Frenzy Classic.
Re: Phantom keyboard building progress and toughts.
« Reply #9 on: Fri, 02 May 2014, 03:56:40 »
Quote from: strict on Thu, 01 May 2014, 16:18:59
Nice looking board! I didnt see it mentioned, do you use a stainless steel or aluminum plate?
Stainless steel. And i think it is got from this group buy: http://geekhack.org/index.php?topic=38623.0
Logged

Offline minho

  • Posts: 490
  • Location: United States
  • i'm kind of back
Re: Phantom keyboard building progress and toughts.
« Reply #10 on: Fri, 02 May 2014, 04:44:41 »
What case did you use on this?
Logged

Offline quochung1989

  • Vintage Cherry Collector
  • Posts: 1187
  • Location: Ebay heaven.
  • Frenzy Classic.
Re: Phantom keyboard building progress and toughts.
« Reply #11 on: Fri, 02 May 2014, 07:14:28 »
Quote from: minho on Fri, 02 May 2014, 04:44:41
What case did you use on this?
Vortex Filco from mechanicalkeyboards.com
Logged

Offline minho

  • Posts: 490
  • Location: United States
  • i'm kind of back
Re: Phantom keyboard building progress and toughts.
« Reply #12 on: Fri, 02 May 2014, 07:33:09 »
Quote from: quochung1989 on Fri, 02 May 2014, 07:14:28
Quote from: minho on Fri, 02 May 2014, 04:44:41
What case did you use on this?
Vortex Filco from mechanicalkeyboards.com

Oh okay, thanks!
Logged
Pages:  [1]     Go Up
« previous next »