« previous next »
Pages:  [1]     Go Down

Author Topic: The best rubber feet I've found so far  (Read 3234 times)

0 Members and 1 Guest are viewing this topic.

Offline intelli78

  • Thread Starter
  • Posts: 1503
  • Location: Seattle
The best rubber feet I've found so far
« on: Mon, 14 July 2014, 14:57:29 »
We've had a lot of threads about this... so many that I wasn't sure which one to update... so here's yet another one.

I have bought 5+ types of rubber feet over the past few months (mainly for HHKB Pro 2) but none have been satisfying. They were either too thick, too ugly (round = yuck), not sticky enough, etc.

I finally found some that I like. They are 2.5mm thick -- just barely thicker than the two rubber feet on the HHKB. Very sticky adhesive and very good anti-slip properties. Plus, nice and cheap.

http://www.westfloridacomponents.com/HW304APF10/Clear+Square+Small+Self-Adhesive+Rubber+Bumpons+Feet+10.2mm+x+2.5mm.html

« Last Edit: Tue, 15 July 2014, 00:03:58 by intelli78 »
Logged
Please consider carefully before you decide to comment, for Jesus.

Offline kaotikb

  • Posts: 91
  • Location: Alberta, Canada
Re: The best rubber feet I've found so far
« Reply #1 on: Mon, 14 July 2014, 15:08:23 »
Do these rubber feet work well on a smooth surface desk like glass?
Logged
Ducky 1087 (Green ALPS) |  CM QFR Stealth (MX Brown) | Unicomp Ultra Classic |Poker II (MX Brown)  | IBM 1391401 1991 | IBM 1391401 1989 | Ducky Shine 3 White Edition (MX Brown) | G80-3700(MX Black) | Corsair K70 (MX Brown) | Varmillo VA87MR (Gateron Red)

Pointing Devices:  Microsoft Trackball Optical (Ceramic bearings Installed)  | Sanwa MA-TB39BK (Larger Ceramic Bearings Installed) | Elecom M-XT2URBK | Kensington Slimblade | Logitech Trackman Wheel | Logitech Trackman Marble Plus

Offline intelli78

  • Thread Starter
  • Posts: 1503
  • Location: Seattle
Re: The best rubber feet I've found so far
« Reply #2 on: Mon, 14 July 2014, 15:10:54 »
Just tried it. Yup, the board stayed firmly in place.
Logged
Please consider carefully before you decide to comment, for Jesus.

Offline Lu_e

  • Posts: 652
  • Location: NWUSA
Re: The best rubber feet I've found so far
« Reply #3 on: Mon, 14 July 2014, 15:14:47 »
Nice pricing + shipping. I'll probably grab these for a few different things, thanks.
Logged

Just say NO to ABS keycaps

Offline kaotikb

  • Posts: 91
  • Location: Alberta, Canada
Re: The best rubber feet I've found so far
« Reply #4 on: Mon, 14 July 2014, 15:15:52 »
Quote from: intelli78 on Mon, 14 July 2014, 15:10:54
Just tried it. Yup, the board stayed firmly in place.

Awesome, I will also order some. Thanks!
Logged
Ducky 1087 (Green ALPS) |  CM QFR Stealth (MX Brown) | Unicomp Ultra Classic |Poker II (MX Brown)  | IBM 1391401 1991 | IBM 1391401 1989 | Ducky Shine 3 White Edition (MX Brown) | G80-3700(MX Black) | Corsair K70 (MX Brown) | Varmillo VA87MR (Gateron Red)

Pointing Devices:  Microsoft Trackball Optical (Ceramic bearings Installed)  | Sanwa MA-TB39BK (Larger Ceramic Bearings Installed) | Elecom M-XT2URBK | Kensington Slimblade | Logitech Trackman Wheel | Logitech Trackman Marble Plus

Offline CK Briefs

  • formerly calvins1
  • Posts: 545
  • Location: BC, Canada
Re: The best rubber feet I've found so far
« Reply #5 on: Mon, 14 July 2014, 15:17:08 »
How's the shipping to canada?

and i was JUST complaining about the crappy feet on the HHKB
Logged
Current Keyboards: Orion - 62g ergo clears;
A87 PS2AVR - 59g ergo clears; QFR - stock blues

Offline kaotikb

  • Posts: 91
  • Location: Alberta, Canada
Re: The best rubber feet I've found so far
« Reply #6 on: Mon, 14 July 2014, 15:20:55 »
14.95 shipping
Logged
Ducky 1087 (Green ALPS) |  CM QFR Stealth (MX Brown) | Unicomp Ultra Classic |Poker II (MX Brown)  | IBM 1391401 1991 | IBM 1391401 1989 | Ducky Shine 3 White Edition (MX Brown) | G80-3700(MX Black) | Corsair K70 (MX Brown) | Varmillo VA87MR (Gateron Red)

Pointing Devices:  Microsoft Trackball Optical (Ceramic bearings Installed)  | Sanwa MA-TB39BK (Larger Ceramic Bearings Installed) | Elecom M-XT2URBK | Kensington Slimblade | Logitech Trackman Wheel | Logitech Trackman Marble Plus

Offline kenmai9

  • Unicornforce
  • * Exquisite Elder
  • Posts: 2156
  • Location: Orange County, CA
  • Skrrr
Re: The best rubber feet I've found so far
« Reply #7 on: Mon, 14 July 2014, 15:22:34 »
Quote from: intelli78 on Mon, 14 July 2014, 14:57:29
We've had a lot of threads about this... so many that I wasn't sure which one to update... so here's yet another one.

I have bought 5+ types of rubber feet over the past few months (mainly for HHKB Pro 2) but none have been satisfying. They were either too thick, too ugly (round = yuck), not sticky enough, etc.

I finally found some that I like. They are 2.5mm thick -- just barely thicker than the two rubber feet on the HHKB. Very sticky adhesive and very good anti-slip properties. Plus, nice and cheap.

http://www.westfloridacomponents.com/HW304APF10/Clear+Square+Small+Self-Adhesive+Rubber+Bumpons+Feet+10.2mm+x+2.5mm.html

Show Image


Thank youu!

@kaotikb, mine was only like $4 shipping
Logged

Offline CK Briefs

  • formerly calvins1
  • Posts: 545
  • Location: BC, Canada
Re: The best rubber feet I've found so far
« Reply #8 on: Mon, 14 July 2014, 15:24:23 »

Quote from: kaotikb on Mon, 14 July 2014, 15:20:55
14.95 shipping

Reasonable, but QQ 15 shipping for what's only a 1-2 dollar purchase
Logged
Current Keyboards: Orion - 62g ergo clears;
A87 PS2AVR - 59g ergo clears; QFR - stock blues

Offline kaotikb

  • Posts: 91
  • Location: Alberta, Canada
Re: The best rubber feet I've found so far
« Reply #9 on: Mon, 14 July 2014, 15:33:11 »
Quote from: CK Briefs on Mon, 14 July 2014, 15:24:23

Quote from: kaotikb on Mon, 14 July 2014, 15:20:55
14.95 shipping

Reasonable, but QQ 15 shipping for what's only a 1-2 dollar purchase

Maybe we can find something similar in Canada. I tried some of those feet from the hardware store and the board still slides around on the desk
Logged
Ducky 1087 (Green ALPS) |  CM QFR Stealth (MX Brown) | Unicomp Ultra Classic |Poker II (MX Brown)  | IBM 1391401 1991 | IBM 1391401 1989 | Ducky Shine 3 White Edition (MX Brown) | G80-3700(MX Black) | Corsair K70 (MX Brown) | Varmillo VA87MR (Gateron Red)

Pointing Devices:  Microsoft Trackball Optical (Ceramic bearings Installed)  | Sanwa MA-TB39BK (Larger Ceramic Bearings Installed) | Elecom M-XT2URBK | Kensington Slimblade | Logitech Trackman Wheel | Logitech Trackman Marble Plus

Offline kaotikb

  • Posts: 91
  • Location: Alberta, Canada
Re: The best rubber feet I've found so far
« Reply #10 on: Mon, 14 July 2014, 15:36:27 »
Logged
Ducky 1087 (Green ALPS) |  CM QFR Stealth (MX Brown) | Unicomp Ultra Classic |Poker II (MX Brown)  | IBM 1391401 1991 | IBM 1391401 1989 | Ducky Shine 3 White Edition (MX Brown) | G80-3700(MX Black) | Corsair K70 (MX Brown) | Varmillo VA87MR (Gateron Red)

Pointing Devices:  Microsoft Trackball Optical (Ceramic bearings Installed)  | Sanwa MA-TB39BK (Larger Ceramic Bearings Installed) | Elecom M-XT2URBK | Kensington Slimblade | Logitech Trackman Wheel | Logitech Trackman Marble Plus

Offline CK Briefs

  • formerly calvins1
  • Posts: 545
  • Location: BC, Canada
Re: The best rubber feet I've found so far
« Reply #11 on: Mon, 14 July 2014, 15:38:56 »
Thanks!

Have you tested these ones out?
I guess I should just go researching
Logged
Current Keyboards: Orion - 62g ergo clears;
A87 PS2AVR - 59g ergo clears; QFR - stock blues

Offline kaotikb

  • Posts: 91
  • Location: Alberta, Canada
Re: The best rubber feet I've found so far
« Reply #12 on: Mon, 14 July 2014, 15:40:56 »
Quote from: CK Briefs on Mon, 14 July 2014, 15:38:56
Thanks!

Have you tested these ones out?
I guess I should just go researching


I have not, but claim to be the same material.
Logged
Ducky 1087 (Green ALPS) |  CM QFR Stealth (MX Brown) | Unicomp Ultra Classic |Poker II (MX Brown)  | IBM 1391401 1991 | IBM 1391401 1989 | Ducky Shine 3 White Edition (MX Brown) | G80-3700(MX Black) | Corsair K70 (MX Brown) | Varmillo VA87MR (Gateron Red)

Pointing Devices:  Microsoft Trackball Optical (Ceramic bearings Installed)  | Sanwa MA-TB39BK (Larger Ceramic Bearings Installed) | Elecom M-XT2URBK | Kensington Slimblade | Logitech Trackman Wheel | Logitech Trackman Marble Plus

Offline Vanilla

  • Posts: 140
  • Location: SF living
  • 110% Snuggable
Re: The best rubber feet I've found so far
« Reply #13 on: Mon, 14 July 2014, 23:02:23 »
Home depot carries something exactly like this and ones that are round in 3 different sizes. About $3-$4 a pack.

They work pretty well although you have to give the adhesive some time to properly set before you can go wild.
Logged
Pages:  [1]     Go Up
« previous next »