« previous next »
Pages:  [1]     Go Down

Author Topic: MJ2 rings when bottoming out.  (Read 1319 times)

0 Members and 1 Guest are viewing this topic.

Offline oledome

  • Thread Starter
  • Posts: 86
  • Location: London, England
  • not batman
MJ2 rings when bottoming out.
« on: Sun, 18 January 2015, 09:36:15 »
After some deliberation I decided to go with what seemed like a safe bet - the Filco Majestouch 2 Ninja, with Browns. Now I've read some Brown hate around here but I really like how these feel, my first mechanical keyboard and I have almost only good things to say.

My one complaint, and it is quite a big one, is that when bottoming out the keyboard rings, I assume it's the metal plate inside but if anyone could give me a solution to this I would appreciate it, I have light tinnitus in one ear I don't normally hear but this ring is the exact same tone so it manages to draw my attention. I guess O-Rings would help dampen the sound, is there anything I need to know about O-rings as far as quality? O-rings are O-rings right?
Logged

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Re: MJ2 rings when bottoming out.
« Reply #1 on: Sun, 18 January 2015, 09:38:03 »
It's called ping.  It's a filco feature.
Logged

Offline oledome

  • Thread Starter
  • Posts: 86
  • Location: London, England
  • not batman
Re: MJ2 rings when bottoming out.
« Reply #2 on: Sun, 18 January 2015, 09:57:45 »
Put in a couple of O-rings from my switch tester set and that seems to help.
Logged

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 12281
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: MJ2 rings when bottoming out.
« Reply #3 on: Sun, 18 January 2015, 10:16:15 »
Quote from: oledome on Sun, 18 January 2015, 09:57:45
Put in a couple of O-rings from my switch tester set and that seems to help.

Could also open it up and put some rubber drawer liner under the PCB.
Logged
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | ctrl.alt x GON 60% | TGR Alice | Mira SE #29 | Mira SE #34 | Revo One | z | Keycult No. 1 | First CW87 prototype | Mech27v1 | Camp C225 | Duck Orion V1 | LZ CLS sxh | Geon Frog TKL | Hiney TKL One | Geon Glare TKL



"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos, after I came back from a break | "Is Linkshine our Nixon?" -NAV | "Puddsy is the Puddsy of keebs" -ns90

Offline oledome

  • Thread Starter
  • Posts: 86
  • Location: London, England
  • not batman
Re: MJ2 rings when bottoming out.
« Reply #4 on: Sun, 18 January 2015, 10:52:58 »
Quote from: TacticalStache on Sun, 18 January 2015, 10:16:15
Quote from: oledome on Sun, 18 January 2015, 09:57:45
Put in a couple of O-rings from my switch tester set and that seems to help.

Could also open it up and put some rubber drawer liner under the PCB.

Interesting, thanks! I'll have to take a look at that. Have you done this yourself?
Logged

Offline Dreamre

  • Posts: 863
  • Location: Canada
    • kbdlife
Re: MJ2 rings when bottoming out.
« Reply #5 on: Sun, 18 January 2015, 11:40:18 »
I've done it and it works. Dampens the keyboard all together. This "ringing" is overrated...don't worry too much about it.
Logged

Offline oledome

  • Thread Starter
  • Posts: 86
  • Location: London, England
  • not batman
Re: MJ2 rings when bottoming out.
« Reply #6 on: Tue, 10 February 2015, 06:20:37 »
Quote from: Dreamre on Sun, 18 January 2015, 11:40:18
I've done it and it works. Dampens the keyboard all together. This "ringing" is overrated...don't worry too much about it.

Ok I've tried not to worry about it but it's been nearly a month and this ping is driving me nuts.

Is this the product I'm looking for?

Logged

Offline Polymer

  • Posts: 1587
Re: MJ2 rings when bottoming out.
« Reply #7 on: Tue, 10 February 2015, 08:09:50 »
Its actually happening on the way up so outside of shortening the travel distance, o-rings, IMO, don't do much. The liner DOES help though...
Logged
Pages:  [1]     Go Up
« previous next »