Author Topic: Orion V2 Kustom TKL Group Buy (Read 1222308 times)

yuktsi · « **Reply #650 on:** Fri, 25 September 2015, 14:26:58 »

Quote from: filphil on Thu, 24 September 2015, 05:51:55

It's okay. I linked the kbdlab thread to leeku and he also mentioned that it was his thread.

~~I'll ask if he has extra plate and pcb combos left over.~~ Nothing available

Hi Elton! I just sent you a PM.

kacase · « **Reply #651 on:** Sat, 26 September 2015, 01:27:33 »

Someone on kbdlab recieved their ORION!!!!

Isn't she a beauty?

Red PCB is now confirmed too.

ika · « **Reply #652 on:** Sat, 26 September 2015, 02:39:48 »

Aaaaaaa it's happening. I hoped Elton gets the message about my order transfer before it ships

yuktsi · « **Reply #653 on:** Sat, 26 September 2015, 03:09:12 »

yeah. I hope he sees my msg too before the boards are shipped.

Halverson · « **Reply #654 on:** Sat, 26 September 2015, 03:15:51 »

I'll tell him to get his ass in here lol

sncbraxsc2 · « **Reply #655 on:** Sat, 26 September 2015, 06:26:34 »

Quote from: Halverson on Sat, 26 September 2015, 03:15:51

I'll tell him to get his ass in here lol

good man

Rainbow_ · « **Reply #656 on:** Sat, 26 September 2015, 16:41:47 »

Found a photo of one of these assembled on kbdlab...

filphil · « **Reply #657 on:** Sat, 26 September 2015, 16:52:20 »

Quote from: Rainbow_ on Sat, 26 September 2015, 16:41:47

Found a photo of one of these assembled on kbdlab...

Show Image

So excited

orcinus · « **Reply #658 on:** Sat, 26 September 2015, 19:14:16 »

Quote from: ramnes on Mon, 14 September 2015, 18:57:46

http://kbdlab.co.kr/index.php?document_srl=3066285&mid=board_Lsno50

Wait. Where did the holes above the cursor keys go?
Also, why are there two RGB power LEDs above them?

orcinus · « **Reply #659 on:** Sat, 26 September 2015, 19:16:39 »

Quote from: kacase on Sat, 26 September 2015, 01:27:33

Show Image

Same question here.

Fnzzy · « **Reply #660 on:** Sat, 26 September 2015, 19:36:19 »

Looks like the Orion v1 top housing. It has a thicker bezel. http://duck0113.tistory.com/114

rsadek · « **Reply #661 on:** Sun, 27 September 2015, 00:59:57 »

Quote from: orcinus on Sat, 26 September 2015, 19:16:39

Quote from: kacase on Sat, 26 September 2015, 01:27:33
Show Image

Same question here.

Didn't you know about the special kbdlab-only option for a special craptastic Orion-without-the-Orionness version?

kacase · « **Reply #662 on:** Sun, 27 September 2015, 05:51:19 »

Quote from: Fnzzy on Sat, 26 September 2015, 19:36:19

Looks like the Orion v1 top housing. It has a thicker bezel. http://duck0113.tistory.com/114

correct me if i'm wrong, but the v1 didnt have those 5 LEDs above the arrows.

http://duck0113.tistory.com/86

Fnzzy · « **Reply #663 on:** Sun, 27 September 2015, 07:46:01 »

Quote from: kacase on Sun, 27 September 2015, 05:51:19

Quote from: Fnzzy on Sat, 26 September 2015, 19:36:19
Looks like the Orion v1 top housing. It has a thicker bezel. http://duck0113.tistory.com/114

correct me if i'm wrong, but the v1 didnt have those 5 LEDs above the arrows.

http://duck0113.tistory.com/86

Oh I was replying to Orcinus' post where he asked why the Orion in his link didn't have the holes above the arrows.

Quote from: orcinus on Sat, 26 September 2015, 19:14:16

Quote from: ramnes on Mon, 14 September 2015, 18:57:46
http://kbdlab.co.kr/index.php?document_srl=3066285&mid=board_Lsno50

Wait. Where did the holes above the cursor keys go?
Also, why are there two RGB power LEDs above them?

But now that I actually look at the second post he did the guy who got his Orion v2 also doesn't have the holes that we get. I am now confused as well.

Rainbow_ · « **Reply #664 on:** Sun, 27 September 2015, 13:23:30 »

Quote from: Fnzzy on Sun, 27 September 2015, 07:46:01

But now that I actually look at the second post he did the guy who got his Orion v2 also doesn't have the holes that we get. I am now confused as well.

I can see the LED holes in the assembled one, but I think the one that is just parts is too low quality to see them. It has all of the other characteristics of v2, like the acrylic things that allow light to shine through the side of the board.

seedvd · « **Reply #665 on:** Sun, 27 September 2015, 23:06:46 »

Saw some pictures of Duck's new unnamed design board on kbdlab. http://kbdlab.co.kr/index.php?document_srl=3094615&mid=board_Lsno50

I couldnt see housing designs in those pictures and did hack them with photoshop. They look nicer with thick bezel and bottom aluminum housing with maybe 7 degree angled.

Rainbow_ · « **Reply #666 on:** Tue, 29 September 2015, 12:21:22 »

Another completed Orion v2!
source

Steezus · « **Reply #667 on:** Tue, 29 September 2015, 14:03:04 »

Black and red look amazing, I can't wait for the next board for Duck to release. So disappointed I missed this group buy.

jaemzp · « **Reply #668 on:** Tue, 29 September 2015, 18:53:47 »

Quote from: Steezus on Tue, 29 September 2015, 14:03:04

Black and red look amazing, I can't wait for the next board for Duck to release. So disappointed I missed this group buy.

Duck Eagle/Viper v2

ViệtNV · « **Reply #669 on:** Tue, 29 September 2015, 23:27:10 »

Quote from: jaemzp on Tue, 29 September 2015, 18:53:47

Duck Eagle/Viper v2

i hope so, too

Rainbow_ · « **Reply #670 on:** Wed, 30 September 2015, 00:24:29 »

Another one from kbdlab!

Source

swimmingbird · « **Reply #671 on:** Wed, 30 September 2015, 05:37:00 »

Quote from: jaemzp on Tue, 29 September 2015, 18:53:47

Quote from: Steezus on Tue, 29 September 2015, 14:03:04
Black and red look amazing, I can't wait for the next board for Duck to release. So disappointed I missed this group buy.

Duck Eagle/Viper v2

Man I think I'd buy both if it got run again... or maybe just two vipers

jaemzp · « **Reply #672 on:** Wed, 30 September 2015, 06:04:05 »

Quote from: swimmingbird on Wed, 30 September 2015, 05:37:00

Quote from: jaemzp on Tue, 29 September 2015, 18:53:47
Quote from: Steezus on Tue, 29 September 2015, 14:03:04
Black and red look amazing, I can't wait for the next board for Duck to release. So disappointed I missed this group buy.

Duck Eagle/Viper v2

Man I think I'd buy both if it got run again... or maybe just two vipers

Two is too pricey for me

Prob get one viper though. Apparently v2 was to have an asymmetric bottom row similar to the hhkb

swimmingbird · « **Reply #673 on:** Wed, 30 September 2015, 06:09:31 »

Quote from: jaemzp on Wed, 30 September 2015, 06:04:05

Quote from: swimmingbird on Wed, 30 September 2015, 05:37:00
Quote from: jaemzp on Tue, 29 September 2015, 18:53:47
Quote from: Steezus on Tue, 29 September 2015, 14:03:04
Black and red look amazing, I can't wait for the next board for Duck to release. So disappointed I missed this group buy.

Duck Eagle/Viper v2

Man I think I'd buy both if it got run again... or maybe just two vipers

Two is too pricey for me Prob get one viper though. Apparently v2 was to have an asymmetric bottom row similar to the hhkb

So it would be 1u/1.5u/6.25u/1.5u/1u like the HHKB?

ryptide11 · « **Reply #674 on:** Wed, 30 September 2015, 13:51:29 »

Elton, were you able to change my address?

Steezus · « **Reply #675 on:** Wed, 30 September 2015, 23:34:53 »

Every time I visit this thread, I want this board more and more. Shot in the dark but if anybody is trying to sell their order, I'm interested.

kacase · « **Reply #676 on:** Thu, 01 October 2015, 09:51:54 »

Even more Orion goodness

Blue-Gray Top w/ Silver Alu Bottom, Gateron blacks and Triumph Adler GMK
all credit to 눈부신눈매™ from kbdlab

Fnzzy · « **Reply #677 on:** Thu, 01 October 2015, 10:26:02 »

ye uhm I want mine as well please.

Ahkrael · « **Reply #678 on:** Thu, 01 October 2015, 14:46:48 »

oh wow, that blue-grey looks very nice. It almost looks like the raw alum, though maybe it's just the contrast between the teal and the lighter silver.

orcinus · « **Reply #679 on:** Thu, 01 October 2015, 18:48:14 »

Damn, now i'm sorry i've changed my order from black to silver : /
Should've stuck with black.

Edit: Or maybe not.
Didn't refresh before replying, so haven't seen the silver until now

elton5354 · « **Reply #680 on:** Fri, 02 October 2015, 09:21:00 »

Sorry guys, I haven't updated the spreadsheet for a while. I will do it today. NOT to worry. I will read through the PMs and change everything in order.

Meanwhile, take a look at their next 75% kustom...

rainb1ood · « **Reply #681 on:** Fri, 02 October 2015, 09:21:56 »

Is that octagon v2!?

Sed8op8 · « **Reply #682 on:** Fri, 02 October 2015, 09:23:10 »

Quote from: elton5354 on Fri, 02 October 2015, 09:21:00

Sorry guys, I haven't updated the spreadsheet for a while. I will do it today. NOT to worry. I will read through the PMs and change everything in order.

Meanwhile, take a look at their next 75% kustom...

Show Image

stop making new stuff I want Duck haha can't afford it :thumb: thanks Elton exciting stuff and I hope your not to overwhelmed with PMs haha

ctrlX · « **Reply #683 on:** Fri, 02 October 2015, 09:46:03 »

Good stuff Elton. Can I smell ISO compatibility? :-)

digi · « **Reply #684 on:** Fri, 02 October 2015, 09:50:36 »

Quote from: elton5354 on Fri, 02 October 2015, 09:21:00

Sorry guys, I haven't updated the spreadsheet for a while. I will do it today. NOT to worry. I will read through the PMs and change everything in order.

Meanwhile, take a look at their next 75% kustom...

Show Image

Uhm, yea, so this will also have Alps support like the Orion!??

SIGN UP FOR THE ALPINE SP GB BOYS!! (it's 60% but you can use blanks or something for the F keys, hehe)

Rainbow_ · « **Reply #685 on:** Fri, 02 October 2015, 09:58:33 »

Quote from: elton5354 on Fri, 02 October 2015, 09:21:00

Sorry guys, I haven't updated the spreadsheet for a while. I will do it today. NOT to worry. I will read through the PMs and change everything in order.

Meanwhile, take a look at their next 75% kustom...

Show Image

Good stuff, elton. Does this mean we get our tracking numbers too? ;)

elton5354 · « **Reply #686 on:** Fri, 02 October 2015, 10:11:10 »

I've updated everything now. Please check to make sure it is right.

They haven't shipped ours yet, so no tracking..

Sed8op8 · « **Reply #687 on:** Fri, 02 October 2015, 10:18:09 »

I don't know about anyone else but my order has been updated thanks a million Elton

E3E · « **Reply #688 on:** Fri, 02 October 2015, 10:53:09 »

Quote from: digi on Fri, 02 October 2015, 09:50:36

Quote from: elton5354 on Fri, 02 October 2015, 09:21:00
Sorry guys, I haven't updated the spreadsheet for a while. I will do it today. NOT to worry. I will read through the PMs and change everything in order.

Meanwhile, take a look at their next 75% kustom...

Show Image

Uhm, yea, so this will also have Alps support like the Orion!??

SIGN UP FOR THE ALPINE SP GB BOYS!! (it's 60% but you can use blanks or something for the F keys, hehe)

So it IS an Octagon v2. Fuuuuuuusk my liiiiiife! If it has Alps support, then I am done. Just done. Bye bye wallet.

ViệtNV · « **Reply #689 on:** Fri, 02 October 2015, 12:53:55 »

Quote from: elton5354 on Fri, 02 October 2015, 09:21:00

Sorry guys, I haven't updated the spreadsheet for a while. I will do it today. NOT to worry. I will read through the PMs and change everything in order.

Meanwhile, take a look at their next 75% kustom...

Show Image

Why not Viper/Eagle v2 :'(

ika · « **Reply #690 on:** Fri, 02 October 2015, 13:34:51 »

thanks for the update elton! now all reservation has been converted to anticipation

can't wait for this!

yicaoyimu · « **Reply #691 on:** Fri, 02 October 2015, 13:40:09 »

I wish there is Duck 65% in V2 design.

pmh1410 · « **Reply #692 on:** Fri, 02 October 2015, 13:42:43 »

Quote from: elton5354 on Fri, 02 October 2015, 09:21:00

Sorry guys, I haven't updated the spreadsheet for a while. I will do it today. NOT to worry. I will read through the PMs and change everything in order.

Meanwhile, take a look at their next 75% kustom...

Show Image

i hope that USB port is more nice (Like LZMXmini) than Octagon ;)

digi · « **Reply #693 on:** Fri, 02 October 2015, 14:04:11 »

doh mah mae

pichu23 · « **Reply #694 on:** Fri, 02 October 2015, 16:29:02 »

Quote from: elton5354 on Fri, 02 October 2015, 09:21:00

Sorry guys, I haven't updated the spreadsheet for a while. I will do it today. NOT to worry. I will read through the PMs and change everything in order.

Meanwhile, take a look at their next 75% kustom...

Show Image

Oh man, If it was a 60%, I'd order one in a heartbeat. :(

nguyenkimtam · « **Reply #695 on:** Fri, 02 October 2015, 16:33:23 »

Quote from: elton5354 on Fri, 02 October 2015, 09:21:00

Sorry guys, I haven't updated the spreadsheet for a while. I will do it today. NOT to worry. I will read through the PMs and change everything in order.

Meanwhile, take a look at their next 75% kustom...

Show Image

I'm waiting for that , 75% kb is great :thumb:

Jokrik · « **Reply #696 on:** Sat, 03 October 2015, 04:05:56 »

Quote from: elton5354 on Fri, 02 October 2015, 09:21:00

Sorry guys, I haven't updated the spreadsheet for a while. I will do it today. NOT to worry. I will read through the PMs and change everything in order.

Meanwhile, take a look at their next 75% kustom...

Show Image

75% in alps, it's like a dream come true
my poor wallet :(

whentheclouds · « **Reply #697 on:** Sat, 03 October 2015, 08:59:27 »

duck's going all out with the led holes hmm

alienman82 · « **Reply #698 on:** Sat, 03 October 2015, 13:11:04 »

~~If anyone has an alps orion v2 coming and wants to sell contact me.~~

elton5354 · « **Reply #699 on:** Sat, 03 October 2015, 19:41:49 »

The first 30 will be shipped soon. The rest will follow after a few weeks.

Regarding alps for the new 75% I am not sure they will go along with it unless there are significant interest in it. If there are they can get leeku to make them as an add on.

News:

Author Topic: Orion V2 Kustom TKL Group Buy (Read 1222308 times)