Author Topic: [IC] [Art Print] 4C "Cherry" Poster Art  (Read 11779 times)

0 Members and 1 Guest are viewing this topic.

Offline Oobly

  • * Esteemed Elder
  • Posts: 3929
  • Location: Finland
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #100 on: Tue, 02 June 2015, 01:23:36 »
The slider top is all wonky and that throws off my eye... if the angle were just a touch more towards the viewer it would be more acceptable to my "engineer's" eye. Then again, perhaps that's just an indication that these are not for me.
Buying more keycaps,
it really hacks my wallet,
but I must have them.

Offline hydrospell

  • * Destiny Supporter
  • Thread Starter
  • Posts: 272
  • Location: Singapore
  • some keyboard thing
    • octobrain
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #101 on: Sun, 07 June 2015, 11:14:15 »
Hi guys I'm still working on this!
Here are some updates; test print batch 2 with extender base. The tint is much better and you can see more values in the layers now.


Here's my little printing racket in a small as heck Singapore apartment bedroom.


I'll do proper scans once these dry completely tomorrow morning.

⌨ Filco MJ2 MX Blues / M0116 Orange Alps / Homemade 60% MX Reds / M0110

Cherry MX art prints 20/50 still available!

Offline hydrospell

  • * Destiny Supporter
  • Thread Starter
  • Posts: 272
  • Location: Singapore
  • some keyboard thing
    • octobrain
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #102 on: Sun, 07 June 2015, 11:15:47 »
The slider top is all wonky and that throws off my eye... if the angle were just a touch more towards the viewer it would be more acceptable to my "engineer's" eye. Then again, perhaps that's just an indication that these are not for me.

I understand what you're saying and agree, now that you mention it it's quite obvious to me too.

I will fix this for the final print as I need to send artwork for final screens anyway.
⌨ Filco MJ2 MX Blues / M0116 Orange Alps / Homemade 60% MX Reds / M0110

Cherry MX art prints 20/50 still available!

Offline Halverson

  • Traitor Supreme
  • Posts: 6791
  • GIRLSHARK WIZBRO
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #103 on: Sun, 07 June 2015, 13:16:09 »

Hi guys I'm still working on this!
Here are some updates; test print batch 2 with extender base. The tint is much better and you can see more values in the layers now.
Show Image


Here's my little printing racket in a small as heck Singapore apartment bedroom.
Show Image


I'll do proper scans once these dry completely tomorrow morning.

Very very cool! Colors looking great!

Offline hydrospell

  • * Destiny Supporter
  • Thread Starter
  • Posts: 272
  • Location: Singapore
  • some keyboard thing
    • octobrain
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #104 on: Sun, 07 June 2015, 13:36:59 »
<3

more scans to come
goodnight world!

⌨ Filco MJ2 MX Blues / M0116 Orange Alps / Homemade 60% MX Reds / M0110

Cherry MX art prints 20/50 still available!

Offline hydrospell

  • * Destiny Supporter
  • Thread Starter
  • Posts: 272
  • Location: Singapore
  • some keyboard thing
    • octobrain
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #105 on: Sun, 07 June 2015, 20:20:15 »


From left to right, the papers used are

1) "Natural Straw"
2) "Natural Feather"
3) "Aquarell DA CA"

My favourite so far is Aquarell which seems to give the best texture and colour opacity.
See bigger image here
⌨ Filco MJ2 MX Blues / M0116 Orange Alps / Homemade 60% MX Reds / M0110

Cherry MX art prints 20/50 still available!

Offline pkircher

  • Posts: 124
  • Location: UK
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #106 on: Mon, 08 June 2015, 19:50:28 »
the blue brown ( both)  combination kills the "edge" of the stem .. you might consider putting some whitespace in .

Offline taylordcraig

  • Posts: 1044
  • Location: BC, Canada
  • New Keyboard Enthusiast [needs to learn to solder]
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #107 on: Wed, 10 June 2015, 16:11:32 »
the blue brown ( both)  combination kills the "edge" of the stem .. you might consider putting some whitespace in .

I agree, perhaps a small highlight at the base of the stem?

Offline hydrospell

  • * Destiny Supporter
  • Thread Starter
  • Posts: 272
  • Location: Singapore
  • some keyboard thing
    • octobrain
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #108 on: Mon, 15 June 2015, 12:53:37 »
Hi guys, amazingly I still exist so I decided to make some changes to the artwork to address the issues raised :)

Have added a bit of white space to the stems to highlight it's contour and bring out the shape:


Also fixed the perspective problem that Oobly and others have brought up:


With this, I think I'm going to start the Group Buy process. Is it legal on GH to run it this way?

1) I will start collecting funds via Paypal
2) Once I collect a certain amount (i.e. my break even number to produce the actual silkscreens for actual size artwork), I will go into production
3) If I do not reach that break even by, let's say, 3 weeks' time, I'll refund everyone's money

⌨ Filco MJ2 MX Blues / M0116 Orange Alps / Homemade 60% MX Reds / M0110

Cherry MX art prints 20/50 still available!

Offline pkircher

  • Posts: 124
  • Location: UK
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #109 on: Mon, 15 June 2015, 22:09:48 »
stem looks way better now,

thing is the colors in your gaphic and the print are way to different .. even if a digi print comes out nicely .. the brown/blue combination wont work with the colors you try to use .. you gotta be blind if you compare both colors and dont see the huge difference ..

there are ways to get the actualy colors mixed up to fit the correct palette of your design .. id buy if a artist draft looks  much like the graphic produced .. right now ..

beware "critic from an non artist: its comparing a stickman to a van goth"

dont take it personal  .. i never did silkprinting ..

so please consider it constructive
« Last Edit: Mon, 15 June 2015, 22:17:06 by pkircher »

Offline hydrospell

  • * Destiny Supporter
  • Thread Starter
  • Posts: 272
  • Location: Singapore
  • some keyboard thing
    • octobrain
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #110 on: Tue, 16 June 2015, 02:17:02 »
stem looks way better now,

thing is the colors in your gaphic and the print are way to different .. even if a digi print comes out nicely .. the brown/blue combination wont work with the colors you try to use .. you gotta be blind if you compare both colors and dont see the huge difference ..

there are ways to get the actualy colors mixed up to fit the correct palette of your design .. id buy if a artist draft looks  much like the graphic produced .. right now ..

beware "critic from an non artist: its comparing a stickman to a van goth"

dont take it personal  .. i never did silkprinting ..

so please consider it constructive

Heya

First off happy that you think the stem looks better.  :cool:

Good that you bring up the colour issue. Again I'm having this done in-house as a sort of creative endeavour, so there will be misregistrations and colours won't be 100% like the digital mockups shown here. (I'm not a professional printmaker, and I don't even have a proper studio space to do this!)

Thing with the photographs/scans of the test prints is that they look duller than the real thing -- again entirely subjective -- but if someone is expecting the prints to look exactly like the digital mockups, I would advise them to not buy this print.

I will make sure to draw attention to this when running the group buy so that people are not misled into buying something they will not end up liking. So thanks for bringing this up :)
⌨ Filco MJ2 MX Blues / M0116 Orange Alps / Homemade 60% MX Reds / M0110

Cherry MX art prints 20/50 still available!

Offline pkircher

  • Posts: 124
  • Location: UK
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #111 on: Tue, 16 June 2015, 04:16:56 »
i was referering to the color composition ..
the blue bown combo works fine in the mock .. yet with the original print colors it "swallow" the details thats what i ment .. (they are to far off the orginal mock colors)

i dont know, if you got access to a prof. paint shop .. but they usualy can mix it to the correct palette .. even reuse the colors which you already have .. might need to buy some white .. to brighten the brown up a bit .. again not a specialist here .. just passing around ideas ..

the better the quality the more buyers you can / will attract .. the silkprints on massdrop are a great success so far ..

and given that you do it from home .. with no prof equiptment .. means each print is somewhat unique

reg registration beeing off by a bit - dont worry to much .. it gives character



Offline okwchin

  • Posts: 163
  • Location: Australia
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #112 on: Tue, 16 June 2015, 10:45:45 »
Perspective of the stem was the Very first thing that drew my attention.

Now its much more pleasing to the eye, and I can finally enjoy the rest of the work  :p

Loving the look and feel of the work, really like it!

(oh and that clock too)

Offline YoungMichael88

  • HHKB Wannabe
  • * Elevated Elder
  • Posts: 1394
  • Location: Canada
  • After all, music soothes even the savage beast
Re: [IC] [Art Print] 4C &quot;Cherry&quot; Poster Art
« Reply #113 on: Tue, 16 June 2015, 20:42:09 »
It's coming along really nicely! I'm excited to get my copy!
Too Soon™          LZ-GH       Full Metal Poker

Offline CPTBadAss

  • Woke up like this
  • Posts: 14305
  • Rich Homie Huang.
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #114 on: Tue, 16 June 2015, 20:51:37 »
Hi guys, amazingly I still exist so I decided to make some changes to the artwork to address the issues raised :)

Have added a bit of white space to the stems to highlight it's contour and bring out the shape:
Show Image


Also fixed the perspective problem that Oobly and others have brought up:
Mine's in the mail already right ;)? These look incredible.

Show Image


With this, I think I'm going to start the Group Buy process. Is it legal on GH to run it this way?

1) I will start collecting funds via Paypal
2) Once I collect a certain amount (i.e. my break even number to produce the actual silkscreens for actual size artwork), I will go into production
3) If I do not reach that break even by, let's say, 3 weeks' time, I'll refund everyone's money



Seems good to me.

Offline Dihedral

  • Posts: 827
  • Location: United Kingdom
  • Mostly Harmless
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #115 on: Sun, 21 June 2015, 08:57:39 »
Looks cool, would like to pick one of these up if they are not too expensive.

Offline primitiveType

  • Posts: 38
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #116 on: Fri, 26 June 2015, 09:51:24 »
Is there a group buy for this yet? definitely interested. Also, it would be cool if you dropped the price upon hitting 50 orders, but I understand if you'd rather not.

Offline pkircher

  • Posts: 124
  • Location: UK
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #117 on: Fri, 03 July 2015, 23:38:54 »
hydrospell,

i was rude enough to vectorize your drawing and scale it up for a local ink test

actualy it looks great on a3 using Black Diamond Canvas (220 gram) Paper ( had it around from some old prints)

pm me your paypal so i can give you something for the artwork :) not trying to steal !!!!!

i can share the results if you are interrested in.
« Last Edit: Fri, 03 July 2015, 23:44:18 by pkircher »

Offline Halverson

  • Traitor Supreme
  • Posts: 6791
  • GIRLSHARK WIZBRO
Re: [IC] [Art Print] 4C &quot;Cherry&quot; Poster Art
« Reply #118 on: Fri, 03 July 2015, 23:55:05 »

hydrospell,

i was rude enough to vectorize your drawing and scale it up for a local ink test

actualy it looks great on a3 using Black Diamond Canvas (220 gram) Paper ( had it around from some old prints)

pm me your paypal so i can give you something for the artwork :) not trying to steal !!!!!

i can share the results if you are interrested in.

May as well post results, interested in seeing! Glad to see you offering money for use :)

Offline pkircher

  • Posts: 124
  • Location: UK
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #119 on: Sat, 04 July 2015, 00:49:59 »
@Halverson thats the least .. creative people should always be payed.
 
i will BUY a silk print from her as well,

i was just currious how it looks on paper .. i make a photo later on, 6:50 am .. so it would be with horrible light ..


just got a a4 scanner .. but shows the texture ..




ps my vector skills are limited soo dont "HATE" to much
« Last Edit: Sat, 04 July 2015, 01:06:51 by pkircher »

Offline pkircher

  • Posts: 124
  • Location: UK
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #120 on: Sat, 04 July 2015, 01:09:10 »
my color profile on the printer is way off i know !!! still i like the result

Offline Seranite

  • Posts: 209
  • Location: The Deep Midwest
  • Doesn't know what's going on.
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #121 on: Sat, 04 July 2015, 09:26:04 »
my color profile on the printer is way off i know !!! still i like the result

Still looks great to me. Hyped for hydro's final result.
 

Offline hydrospell

  • * Destiny Supporter
  • Thread Starter
  • Posts: 272
  • Location: Singapore
  • some keyboard thing
    • octobrain
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #122 on: Sat, 04 July 2015, 09:58:49 »
hydrospell,

i was rude enough to vectorize your drawing and scale it up for a local ink test

actualy it looks great on a3 using Black Diamond Canvas (220 gram) Paper ( had it around from some old prints)

pm me your paypal so i can give you something for the artwork :) not trying to steal !!!!!

i can share the results if you are interrested in.

Hey pkircher, I'm really honoured that you went so far with this  :)) :)) :cool: I'm OK with you printing this for your personal use but please please don't distribute/sell :) And no need to Paypal me anything for that, I would appreciate if you will buy the actual prints too.

--

Hey everyone, sorry I've been away. Combination of work and I wanted to take time to see what I can do with the colours, as commented upon by a couple of people here. Conclusion is the test prints so far are pretty much what you will get in terms of colours, so do not look at the digital art and expect to get those colours. I have verified this with a second run with more attention paid to the base extenders (which makes it more transparent), we're not going to get as controlled a tint as the digital mockup.

TLDR: If you buy the print, please expect colours similar to test prints shown in this post.

With that, I'm currently writing up a Group Buy post and will post here again once that's done. Here's the essential points:

  • Colours: Please expect colours similar to test prints photos shown here.
  • Size: Actual print will be 28cm wide by roughly 33cm height.
  • Paper: Aquarell DA CA 300gsm stock. <- click to see actual stock, colour & texture
  • Edition: Limited to run of 50 only. All prints will be signed and numbered by me.
  • Price: $35 USD + $1.35 Paypal Fees = $36.35 per print. Shipping is included worldwide.
  • Group buy mechanism: Please Paypal me $36.35 x however may prints you would like. Once I hit 20 purchases, I will get the materials and order the screens + start printing. If there are less than 20 purchases after 18 July 2015, I will refund all purchases* and call this off. I will close orders once I hit 50 orders, and additional orders will be refunded*. Dibs in order of payment made. No refunds/returns will be entertained.
  • AP: I have limited Artist Proofs that I will reserve for those who have called dibs in this thread, followed by your edition number (if you're the first to buy, you will get edition 1/50) till all Artist Proofs have been given out.


* Please understand that the fixed part of Paypal fee will be taken by Paypal, so you will receive ~$0.50 less than you paid in the event of a refund.

p/s I've framed one of my test prints and it looks pretty good in a glass frame. Behold: (these are quite high res so do click through to see the originals)

 
 

« Last Edit: Sat, 04 July 2015, 10:10:02 by hydrospell »
⌨ Filco MJ2 MX Blues / M0116 Orange Alps / Homemade 60% MX Reds / M0110

Cherry MX art prints 20/50 still available!

Offline hydrospell

  • * Destiny Supporter
  • Thread Starter
  • Posts: 272
  • Location: Singapore
  • some keyboard thing
    • octobrain
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #123 on: Sat, 04 July 2015, 10:03:01 »
@Halverson thats the least .. creative people should always be payed.
 
i will BUY a silk print from her as well,

i was just currious how it looks on paper .. i make a photo later on, 6:50 am .. so it would be with horrible light ..


just got a a4 scanner .. but shows the texture ..

Show Image

Show Image


ps my vector skills are limited soo dont "HATE" to much

Yo dude the colour is wayyyyy crazy in this one :D Do show me a photo if you have this framed or mounted somehow. Nothing like seeing your work out there in people's workspaces etc!
⌨ Filco MJ2 MX Blues / M0116 Orange Alps / Homemade 60% MX Reds / M0110

Cherry MX art prints 20/50 still available!

Offline pkircher

  • Posts: 124
  • Location: UK
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #124 on: Sat, 04 July 2015, 10:32:48 »
write it up i want nr 33 .. reflects my age ! i or give me an artistdraft if you have one left !!! i donate 10 bucks on top :)

and reg selling or distrib .. i would never do that w/o permission , i value skills and craftmanship

ya my printer .. does give me a hard time .. the ink is dead .. time to get new stuff .. still try to match against in illustrator .. but its a pain in the butt ..

i send you a nice photo as soon as i get the frame. for now .. beware bad lighning  with mobile on whiteboard .. > and loads of funny colors due to the printer



> if you like the following i can print and ship it to you on a3 .. "a small thank you for allowing me to print it for my self"


and an even worse one :
« Last Edit: Sat, 04 July 2015, 10:36:47 by pkircher »

Offline pkircher

  • Posts: 124
  • Location: UK
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #125 on: Sat, 04 July 2015, 11:58:33 »
after color optimisation and scaling a single switch up to a3




im pleased now with the color in that one ( thats actualy a scan!!!):P

i think i make 4 of them each in 1 of the color
« Last Edit: Sat, 04 July 2015, 12:29:07 by pkircher »

Offline Halverson

  • Traitor Supreme
  • Posts: 6791
  • GIRLSHARK WIZBRO
Re: [IC] [Art Print] 4C &quot;Cherry&quot; Poster Art
« Reply #126 on: Sat, 04 July 2015, 12:29:58 »
So excited!

Offline hydrospell

  • * Destiny Supporter
  • Thread Starter
  • Posts: 272
  • Location: Singapore
  • some keyboard thing
    • octobrain
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #127 on: Sat, 04 July 2015, 18:10:13 »
pkircher, colours looking slightly better in the right image on the whiteboard :) However I think you'll love seeing the actual silkscreen  :p There's a warmth to the image somehow. No. 33 reserved for you! But what happens next year when you turn 34?  :eek:

edit Hey I think I'll take you up on that A3 print :) Thank you! Let's talk in PM later.


Guys I've posted my GB post for moderation, once it's approved I'll link up here!

To U.S. friends: Happy Independence Day!

To everyone else: GB approval gonna take a while due to above?  :))

Have a good one guys.
⌨ Filco MJ2 MX Blues / M0116 Orange Alps / Homemade 60% MX Reds / M0110

Cherry MX art prints 20/50 still available!

Offline user 18

  • * Senior Moderator
  • Posts: 2146
  • Location: Ontario, Canada
Re: [IC] [Art Print] 4C &quot;Cherry&quot; Poster Art
« Reply #128 on: Sat, 04 July 2015, 18:20:20 »
I'll take a look at the gb approval right now, one sec.

E: Having trouble seeing it from mobile, will check again once I get back to my PC.
« Last Edit: Sat, 04 July 2015, 18:42:57 by user 18 »
Please PM me if you are waiting on classifieds approval or have a question about the classifieds rules. | geekhack Terms of Service

Max Nighthawk x8 (MX Brown) | CM QFR (MX Blue) | CM QFR (MX Clear) | RK-9000 (MX Red) | Model M 1391401 | Model M SSK 1370475 | CM Novatouch | G80-8113 (MX Clear) | 60% (85g MX Blue) | Whitefox Aria (MX Clear) | CL-LX (MX Clear) | Mira SE (MX Clear)
Avatar by ashdenej

Offline Halverson

  • Traitor Supreme
  • Posts: 6791
  • GIRLSHARK WIZBRO
Re: [IC] [Art Print] 4C &quot;Cherry&quot; Poster Art
« Reply #129 on: Sat, 04 July 2015, 21:30:03 »
Ughhhh still waiting! Hehe

I'll grab an extra two on my order to help out as well. Think we can shove four in one tube? (My order will be for me and YoungMichael)

Offline hydrospell

  • * Destiny Supporter
  • Thread Starter
  • Posts: 272
  • Location: Singapore
  • some keyboard thing
    • octobrain
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #130 on: Sun, 05 July 2015, 00:07:38 »
Still waiting too! Thank you in advance. YoungMichael PMed me and told me about sharing shipping. Let me PM you guys on the side to sort out shipping!
⌨ Filco MJ2 MX Blues / M0116 Orange Alps / Homemade 60% MX Reds / M0110

Cherry MX art prints 20/50 still available!

Offline iceman1925

  • Posts: 37
  • Location: Florida
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #131 on: Sun, 05 July 2015, 02:05:34 »
1. Yes most definitely
2,3. 20 to 45 usd
4. Conus, Florida
5. Just geekhack or maybe cherry switches
Rapid-I||Ducky Mini||'87 Model M SSK||Goldtouch 0077
reddit.com/u/iceman1925

Offline aznairjordan

  • * Destiny Supporter
  • Posts: 380
  • Location: San Diego
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #132 on: Sun, 05 July 2015, 02:47:31 »
Hey hydrospell,

I was wondering if I could call dibs on an AP and get print number 23! It's my favorite number and my birthday is August 23. Thanks!
TGR Jane CE|FC660C|Orion V2
GMK Hyperfuse|GMK Olivetti|GMK Red Alert|Soulfree's Teal|GMK Cyan

Offline hydrospell

  • * Destiny Supporter
  • Thread Starter
  • Posts: 272
  • Location: Singapore
  • some keyboard thing
    • octobrain
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #133 on: Sun, 05 July 2015, 05:14:40 »
iceman1925: Thanks for registering your interest. This group buy is on :) So do pay attention to this thread, I'll post the link once the Group Buy is approved by the mods.

aznairjordan: you got it. Just follow the instructions to place your order and if we meet the MOQ (basically so that I break even and not lose money), I'll reserve #23 for you plus dibs on AP. I think I have enough but let me confirm that again. Thanks!
⌨ Filco MJ2 MX Blues / M0116 Orange Alps / Homemade 60% MX Reds / M0110

Cherry MX art prints 20/50 still available!

Offline user 18

  • * Senior Moderator
  • Posts: 2146
  • Location: Ontario, Canada
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #134 on: Sun, 05 July 2015, 13:00:27 »
Approved the GB thread, sorry it took me so long!

Any chance I can reserve #18?
Please PM me if you are waiting on classifieds approval or have a question about the classifieds rules. | geekhack Terms of Service

Max Nighthawk x8 (MX Brown) | CM QFR (MX Blue) | CM QFR (MX Clear) | RK-9000 (MX Red) | Model M 1391401 | Model M SSK 1370475 | CM Novatouch | G80-8113 (MX Clear) | 60% (85g MX Blue) | Whitefox Aria (MX Clear) | CL-LX (MX Clear) | Mira SE (MX Clear)
Avatar by ashdenej

Offline primitiveType

  • Posts: 38
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #135 on: Sun, 05 July 2015, 14:16:07 »
Can I  get dibs on ap as well?

Offline Seranite

  • Posts: 209
  • Location: The Deep Midwest
  • Doesn't know what's going on.
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #136 on: Sun, 05 July 2015, 14:29:20 »
Oh boy, excited for the GB to finally open up for orders. If several others are reserving numbers can I have #4?
 

Offline hydrospell

  • * Destiny Supporter
  • Thread Starter
  • Posts: 272
  • Location: Singapore
  • some keyboard thing
    • octobrain
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #137 on: Sun, 05 July 2015, 22:17:05 »
Hey guys, I've got you down for specific edition numbers:

pkircher - #33
aznairjordan - #23
user 18 - #18

Seranite, unfortunately #4 is taken! Do you want to pick a different number?

Hi everyone, group buy is on and here's the link!
With that I'm going to lock this thread in a day or so. No more calling dibs here!  ;D
⌨ Filco MJ2 MX Blues / M0116 Orange Alps / Homemade 60% MX Reds / M0110

Cherry MX art prints 20/50 still available!

Offline hydrospell

  • * Destiny Supporter
  • Thread Starter
  • Posts: 272
  • Location: Singapore
  • some keyboard thing
    • octobrain
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #138 on: Mon, 06 July 2015, 00:49:18 »
Update: Seranite - owner of #4 is OK with letting you have it so you have dibs for it currently. Cheers.
⌨ Filco MJ2 MX Blues / M0116 Orange Alps / Homemade 60% MX Reds / M0110

Cherry MX art prints 20/50 still available!

Offline Seranite

  • Posts: 209
  • Location: The Deep Midwest
  • Doesn't know what's going on.
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #139 on: Mon, 06 July 2015, 23:40:11 »
Update: Seranite - owner of #4 is OK with letting you have it so you have dibs for it currently. Cheers.

Crap, took me so long to see this. Is this offer still valid? Working on submitting my order now.
 

Offline hydrospell

  • * Destiny Supporter
  • Thread Starter
  • Posts: 272
  • Location: Singapore
  • some keyboard thing
    • octobrain
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #140 on: Mon, 06 July 2015, 23:41:31 »
Yup of course. Still held for you!
⌨ Filco MJ2 MX Blues / M0116 Orange Alps / Homemade 60% MX Reds / M0110

Cherry MX art prints 20/50 still available!

Offline Seranite

  • Posts: 209
  • Location: The Deep Midwest
  • Doesn't know what's going on.
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #141 on: Mon, 06 July 2015, 23:46:21 »
Yup of course. Still held for you!

Aww thanks! Money and Google form have been sent!

Also thanks to whoever let me have #4, you da best!
« Last Edit: Mon, 06 July 2015, 23:47:55 by Seranite »
 

Offline hydrospell

  • * Destiny Supporter
  • Thread Starter
  • Posts: 272
  • Location: Singapore
  • some keyboard thing
    • octobrain
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #142 on: Mon, 06 July 2015, 23:52:17 »
That was Halv!

Now I understand your username, Seranite :D
⌨ Filco MJ2 MX Blues / M0116 Orange Alps / Homemade 60% MX Reds / M0110

Cherry MX art prints 20/50 still available!

Offline Seranite

  • Posts: 209
  • Location: The Deep Midwest
  • Doesn't know what's going on.
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #143 on: Tue, 07 July 2015, 00:02:22 »
That was Halv!

Now I understand your username, Seranite :D

Ahhh! Someone gets it  :D

Aren't I clever?  :))
 

Offline hydrospell

  • * Destiny Supporter
  • Thread Starter
  • Posts: 272
  • Location: Singapore
  • some keyboard thing
    • octobrain
Re: [IC] [Art Print] 4C "Cherry" Poster Art
« Reply #144 on: Tue, 07 July 2015, 00:03:59 »
Pizza cat level clever!

OK Guys gonna wrap this up and lock the IC thread. For anything else, let's talk over at the GB thread!
https://geekhack.org/index.php?topic=73278.0
⌨ Filco MJ2 MX Blues / M0116 Orange Alps / Homemade 60% MX Reds / M0110

Cherry MX art prints 20/50 still available!