~Leeku 1800 PCB w/ Cherry MX Blues & 65g Spring Swap~I want to thank Nubbinator for graciously selling me his Leeku 1800 PCB <3. I also want to thank all the contributors who posted in this
Leeku Building Thread. Last but not least, I want to thank Dorkvader for all the soldering tips, CPTBadass & JDCarpe for always answering my questions in the simple questions thread.
Please excuse the potato pics! =) I salvaged the case, switches, and keycaps from an INET Spectra Protocol Analyzer which is pretty much identical to a Dolch Pac (Cherry G80-1813HFU):
Firmware URL from Leeku himself:
http://kbdlab.co.kr/index.php?mid=board_sw&search_keyword=1830&search_target=title&document_srl=543530Desoldered all the switches, springs were swapped to 65g:
Soldered all the SMD diodes and resistors:
Soldered in the switches & mounted the stabs:
Removed the old leds from the case and swapped in white leds for Caps Lock, Num Lock, and Scroll Lock. Also soldered all the switch led's ("Cyan" Green
)):
PCB mounted inside the INET Spectra case, I used masking tape on the metal mounting plate just to be sure it wouldn't short out anything near the bottom if it were to touch the pcb.
Pro Zip Tie to keep the cable from getting jerked out:
All done, switches tested good using EK Switch Hitter:
Thanks! =)