Author Topic: [GB][FINISHED] Plates, PCBs and stabilisers - LeandreN Round 3 (Read 223379 times)

reddragon394 · « **Reply #650 on:** Tue, 19 January 2016, 14:08:27 »

Quote from: LeandreN on Tue, 19 January 2016, 12:01:17

picture

A scale with a piece function, nice

xondat · « **Reply #651 on:** Tue, 19 January 2016, 14:10:37 »

Quote from: LeandreN on Tue, 19 January 2016, 12:01:17

Show Image

That looks so much easier.

TalkingTree · « **Reply #652 on:** Tue, 19 January 2016, 15:46:44 »

Another potato picture of mine.
I completed (one of) my board(s).

I decided to go for a 2.25u right shift to match the set.

Happy building everyone, enjoy the amazing GB.

LeandreN · « **Reply #653 on:** Tue, 19 January 2016, 15:56:36 »

Quote from: TalkingTree on Tue, 19 January 2016, 15:46:44

Another potato picture of mine.
I completed (one of) my board(s).

Show Image

I decided to go for a 2.25u right shift to match the set.

Happy building everyone, enjoy the amazing GB.

That set looks great! Where is it from?

TalkingTree · « **Reply #654 on:** Tue, 19 January 2016, 15:59:16 »

Quote from: LeandreN on Tue, 19 January 2016, 15:56:36

Quote from: TalkingTree on Tue, 19 January 2016, 15:46:44
Another potato picture of mine.
I completed (one of) my board(s).

Show Image

I decided to go for a 2.25u right shift to match the set.

Happy building everyone, enjoy the amazing GB.

That set looks great! Where is it from?

Original Cherry G81-3000/SAI (PBT dyesub) except Enter and pipe/backslash that are ABS doubleshot from an original US set.

LeandreN · « **Reply #655 on:** Tue, 19 January 2016, 16:00:35 »

Quote from: TalkingTree on Tue, 19 January 2016, 15:59:16

Quote from: LeandreN on Tue, 19 January 2016, 15:56:36
Quote from: TalkingTree on Tue, 19 January 2016, 15:46:44
Another potato picture of mine.
I completed (one of) my board(s).

Show Image

I decided to go for a 2.25u right shift to match the set.

Happy building everyone, enjoy the amazing GB.

That set looks great! Where is it from?
Original Cherry G81-3000/SAI (PBT dyesub) except Enter and pipe/backslash that are ABS doubleshot from an original US set.

Wow. Thats a good score.

TalkingTree · « **Reply #656 on:** Tue, 19 January 2016, 16:03:16 »

Quote from: LeandreN on Tue, 19 January 2016, 16:00:35

Quote from: TalkingTree on Tue, 19 January 2016, 15:59:16
Quote from: LeandreN on Tue, 19 January 2016, 15:56:36
Quote from: TalkingTree on Tue, 19 January 2016, 15:46:44
Another potato picture of mine.
I completed (one of) my board(s).

Show Image

I decided to go for a 2.25u right shift to match the set.

Happy building everyone, enjoy the amazing GB.

That set looks great! Where is it from?
Original Cherry G81-3000/SAI (PBT dyesub) except Enter and pipe/backslash that are ABS doubleshot from an original US set.
Wow. Thats a good score.

Very good score considering that I bought each second hand keyboard for € 35, shipped.

LeandreN · « **Reply #657 on:** Tue, 19 January 2016, 16:17:47 »

Quote from: TalkingTree on Tue, 19 January 2016, 16:03:16

Quote from: LeandreN on Tue, 19 January 2016, 16:00:35
Quote from: TalkingTree on Tue, 19 January 2016, 15:59:16
Quote from: LeandreN on Tue, 19 January 2016, 15:56:36
Quote from: TalkingTree on Tue, 19 January 2016, 15:46:44
Another potato picture of mine.
I completed (one of) my board(s).

Show Image

I decided to go for a 2.25u right shift to match the set.

Happy building everyone, enjoy the amazing GB.

That set looks great! Where is it from?
Original Cherry G81-3000/SAI (PBT dyesub) except Enter and pipe/backslash that are ABS doubleshot from an original US set.
Wow. Thats a good score.
Very good score considering that I bought each second hand keyboard for € 35, shipped.

That's a steal!

TalkingTree · « **Reply #658 on:** Tue, 19 January 2016, 16:22:50 »

Quote from: LeandreN on Tue, 19 January 2016, 16:17:47

Quote from: TalkingTree on Tue, 19 January 2016, 16:03:16
Quote from: LeandreN on Tue, 19 January 2016, 16:00:35
Quote from: TalkingTree on Tue, 19 January 2016, 15:59:16
Quote from: LeandreN on Tue, 19 January 2016, 15:56:36
Quote from: TalkingTree on Tue, 19 January 2016, 15:46:44
Another potato picture of mine.
I completed (one of) my board(s).

Show Image

I decided to go for a 2.25u right shift to match the set.

Happy building everyone, enjoy the amazing GB.

That set looks great! Where is it from?
Original Cherry G81-3000/SAI (PBT dyesub) except Enter and pipe/backslash that are ABS doubleshot from an original US set.
Wow. Thats a good score.
Very good score considering that I bought each second hand keyboard for € 35, shipped.

That's a steal!

;)

Atredl · « **Reply #659 on:** Tue, 19 January 2016, 20:39:58 »

Sent you a PM LeandreN

nathanrosspowell · « **Reply #660 on:** Tue, 19 January 2016, 22:09:41 »

My plate and stabs came in today. Big thanks LeandreN

LeandreN · « **Reply #661 on:** Wed, 20 January 2016, 02:16:54 »

Quote from: Atredl on Tue, 19 January 2016, 20:39:58

Sent you a PM LeandreN

Replied!

LeandreN · « **Reply #662 on:** Wed, 20 January 2016, 06:56:48 »

tofgerl · « **Reply #663 on:** Wed, 20 January 2016, 07:21:11 »

Quote from: reddragon394 on Tue, 19 January 2016, 14:08:27

Quote from: LeandreN on Tue, 19 January 2016, 12:01:17
picture

A scale with a piece function, nice

"Add 500.000 flours, and stir. Next, take a pinch - say 40.000 sugars and add while stirring."

LeandreN · « **Reply #664 on:** Wed, 20 January 2016, 08:17:50 »

Quote from: tofgerl on Wed, 20 January 2016, 07:21:11

Quote from: reddragon394 on Tue, 19 January 2016, 14:08:27
Quote from: LeandreN on Tue, 19 January 2016, 12:01:17
picture

A scale with a piece function, nice

"Add 500.000 flours, and stir. Next, take a pinch - say 40.000 sugars and add while stirring."

I have started measuring baking ingredients in the unit "Gaterons" now.

Tachi · « **Reply #665 on:** Wed, 20 January 2016, 12:58:30 »

Damn these Gateron blues are nice! Now I wish I'd had the money to get the pcb too!
Shall have to look for a board to build.

TalkingTree · « **Reply #666 on:** Wed, 20 January 2016, 13:40:32 »

@LeandreN: Got 50 more Gateron blues by any chance?

LeandreN · « **Reply #667 on:** Wed, 20 January 2016, 14:48:31 »

Quote from: TalkingTree on Wed, 20 January 2016, 13:40:32

@LeandreN: Got 50 more Gateron blues by any chance?

Yes i do have that, however i have very little time to ship it :/

TalkingTree · « **Reply #668 on:** Wed, 20 January 2016, 14:54:40 »

Quote from: LeandreN on Wed, 20 January 2016, 14:48:31

Quote from: TalkingTree on Wed, 20 January 2016, 13:40:32
@LeandreN: Got 50 more Gateron blues by any chance?

Yes i do have that, however i have very little time to ship it :/

PMed.

LeandreN · « **Reply #669 on:** Wed, 20 January 2016, 14:55:10 »

Quote from: TalkingTree on Wed, 20 January 2016, 14:54:40

Quote from: LeandreN on Wed, 20 January 2016, 14:48:31
Quote from: TalkingTree on Wed, 20 January 2016, 13:40:32
@LeandreN: Got 50 more Gateron blues by any chance?

Yes i do have that, however i have very little time to ship it :/
PMed.

No you didn't

TalkingTree · « **Reply #670 on:** Wed, 20 January 2016, 14:56:35 »

Quote from: LeandreN on Wed, 20 January 2016, 14:55:10

Quote from: TalkingTree on Wed, 20 January 2016, 14:54:40
Quote from: LeandreN on Wed, 20 January 2016, 14:48:31
Quote from: TalkingTree on Wed, 20 January 2016, 13:40:32
@LeandreN: Got 50 more Gateron blues by any chance?

Yes i do have that, however i have very little time to ship it :/
PMed.

No you didn't

I posted here before actually PMing you. You're too quick.

Sisric · « **Reply #671 on:** Thu, 21 January 2016, 13:40:23 »

I've built it! However I have no idea how to work the firmware and now half my board isn't working... Anyone have an easy tutorial and know how to reset it to default? Also some of my LED's aren't working, don't know if it's just another firmware issue or if it is a problem with the keyboard

dae1 · « **Reply #672 on:** Thu, 21 January 2016, 13:45:02 »

This was a learning experience. I found a few Zealio purples that were bad meaning a slight touch activates the key press and would see double characters before I hit bottom. Accidentally putting the switches in the W/L holes, oops. The clear acrylic case frop Ziptyze was causing the pcb stabilizer for the space bar to dislodge and causing a 'sticky' effect on the space bar. I thought I put the stabilizer wrong, but noticed that it was hitting some sort of lip inside of the case. I used a dremel to clear space. Works great now. The RGB leds looks beautiful with it.

I do have a question. With the tier 3 pcb with the RGB leds, would it be ok to add LEDs to keyswitches? I haven't seen anyone with both yet. Also, I guess you can't map mouse controls with the bootmapper editor right?

chancellorr · « **Reply #673 on:** Thu, 21 January 2016, 13:47:03 »

Quote from: dae1 on Thu, 21 January 2016, 13:45:02

This was a learning experience. I found a few Zealio purples that were bad meaning a slight touch activates the key press and would see double characters before I hit bottom. Accidentally putting the switches in the W/L holes, oops. The clear acrylic case frop Ziptyze was causing the pcb stabilizer for the space bar to dislodge and causing a 'sticky' effect on the space bar. I thought I put the stabilizer wrong, but noticed that it was hitting some sort of lip inside of the case. I used a dremel to clear space. Works great now. The RGB leds looks beautiful with it.

I do have a question. With the tier 3 pcb with the RGB leds, would it be ok to add LEDs to keyswitches? I haven't seen anyone with both yet. Also, I guess you can't map mouse controls with the bootmapper editor right?

I've seen a few online with both the RGB led and in key leds. You should be good! This is what I'm planning on doing.

dae1 · « **Reply #674 on:** Thu, 21 January 2016, 13:48:44 »

Quote from: Sisric on Thu, 21 January 2016, 13:40:23

I've built it! However I have no idea how to work the firmware and now half my board isn't working... Anyone have an easy tutorial and know how to reset it to default? Also some of my LED's aren't working, don't know if it's just another firmware issue or if it is a problem with the keyboard

I followed the instructions here if you haven't already done so:
http://blog.winkeyless.kr/183

I had the same issue with the LEDs like you did, too. But if you use the BootMapperClient, you can go to Options->Num of RGB Leds and set that to 16.

I actually mapped the ROW-COLUMN. Follow this: http://www.keyboard-layout-editor.com/#/gists/5f7fa6abb1a691714953

It's very small but you can see the row-column values that map to that key.

dae1 · « **Reply #675 on:** Thu, 21 January 2016, 13:55:00 »

Quote from: chancellorr on Thu, 21 January 2016, 13:47:03

Quote from: dae1 on Thu, 21 January 2016, 13:45:02
This was a learning experience. I found a few Zealio purples that were bad meaning a slight touch activates the key press and would see double characters before I hit bottom. Accidentally putting the switches in the W/L holes, oops. The clear acrylic case frop Ziptyze was causing the pcb stabilizer for the space bar to dislodge and causing a 'sticky' effect on the space bar. I thought I put the stabilizer wrong, but noticed that it was hitting some sort of lip inside of the case. I used a dremel to clear space. Works great now. The RGB leds looks beautiful with it.

I do have a question. With the tier 3 pcb with the RGB leds, would it be ok to add LEDs to keyswitches? I haven't seen anyone with both yet. Also, I guess you can't map mouse controls with the bootmapper editor right?
I've seen a few online with both the RGB led and in key leds. You should be good! This is what I'm planning on doing.

Awesome! Thanks! This is how it looks like right now:
http://imgur.com/p9gFEew

chancellorr · « **Reply #676 on:** Thu, 21 January 2016, 14:25:43 »

Quote from: dae1 on Thu, 21 January 2016, 13:55:00

Quote from: chancellorr on Thu, 21 January 2016, 13:47:03
Quote from: dae1 on Thu, 21 January 2016, 13:45:02
This was a learning experience. I found a few Zealio purples that were bad meaning a slight touch activates the key press and would see double characters before I hit bottom. Accidentally putting the switches in the W/L holes, oops. The clear acrylic case frop Ziptyze was causing the pcb stabilizer for the space bar to dislodge and causing a 'sticky' effect on the space bar. I thought I put the stabilizer wrong, but noticed that it was hitting some sort of lip inside of the case. I used a dremel to clear space. Works great now. The RGB leds looks beautiful with it.

I do have a question. With the tier 3 pcb with the RGB leds, would it be ok to add LEDs to keyswitches? I haven't seen anyone with both yet. Also, I guess you can't map mouse controls with the bootmapper editor right?
I've seen a few online with both the RGB led and in key leds. You should be good! This is what I'm planning on doing.

Awesome! Thanks! This is how it looks like right now:
http://imgur.com/p9gFEew

Mmmmmmm. Love Deep Space. I plan on building a Deep Space Planck one of these days.

LeandreN · « **Reply #677 on:** Thu, 21 January 2016, 14:37:50 »

Quote from: Sisric on Thu, 21 January 2016, 13:40:23

I've built it! However I have no idea how to work the firmware and now half my board isn't working... Anyone have an easy tutorial and know how to reset it to default? Also some of my LED's aren't working, don't know if it's just another firmware issue or if it is a problem with the keyboard

Follow this guide: http://blog.winkeyless.kr/183

And flash the default file.

xondat · « **Reply #678 on:** Thu, 21 January 2016, 14:38:25 »

Still looking for Zealio

Want them sooner than the GB.

Relaxbro · « **Reply #679 on:** Thu, 21 January 2016, 15:14:46 »

Got the package today! Thanks LeandreN

Sisric · « **Reply #680 on:** Thu, 21 January 2016, 17:15:56 »

Quote from: LeandreN on Thu, 21 January 2016, 14:37:50

Quote from: Sisric on Thu, 21 January 2016, 13:40:23
I've built it! However I have no idea how to work the firmware and now half my board isn't working... Anyone have an easy tutorial and know how to reset it to default? Also some of my LED's aren't working, don't know if it's just another firmware issue or if it is a problem with the keyboard

Follow this guide: http://blog.winkeyless.kr/183

And flash the default file.

Thank you for your help, but really I am just an idiot

I sorted it now and this thing is beautiful! No key caps on it yet but I brought it to work to sort it out. Thank you again for the group buy, this has been awesome and I've already ordered by Zealios keys for my next keyboard

Hope to see another group buy from yourself soon! I'll post a picture tomorrow

reddragon394 · « **Reply #681 on:** Thu, 21 January 2016, 22:50:34 »

Quote from: Relaxbro on Thu, 21 January 2016, 15:14:46

Got the package today! Thanks LeandreN

Woooo, where do you live? Yours probably was sent with my lot together, but I'm still desperately waiting for it

Butter · « **Reply #682 on:** Thu, 21 January 2016, 23:00:00 »

I hope the PCB get here tomorrow before the storm hit.

faxe · « **Reply #683 on:** Fri, 22 January 2016, 05:45:05 »

I have a package waiting, don't know what it is, but I am not expecting anything besides this pcb/plate

I think i will be tinkering tonite. Can't wait.

itzmeluigi · « **Reply #684 on:** Fri, 22 January 2016, 17:31:13 »

The grey plate arrived today, extremely fast shipping

This is certainly the nicest plate ive used.

Incoming PM.

Numpy · « **Reply #685 on:** Fri, 22 January 2016, 21:32:08 »

Does the Tier 2 PCB come with pre-soldered resistors for in switch LEDs or will I need to get some myself?

reddragon394 · « **Reply #686 on:** Fri, 22 January 2016, 23:20:40 »

Woooo it all came! Thanks LeandreN for this great GB!

... Though you forgot to change my shipping address that i emailed you about

Thats ok though, i was lucky someone was here to take the package

have some pics:

And yes, the ugly USB cable will be replaced

ISO GER, white in-switch LEDs, PBT Vortex set for now ... really waiting for their doubleshot PBT backlit ISOs

Numpy · « **Reply #687 on:** Sat, 23 January 2016, 02:41:30 »

Quote from: reddragon394 on Fri, 22 January 2016, 23:20:40

Woooo it all came! Thanks LeandreN for this great GB! ... Though you forgot to change my shipping address that i emailed you about Thats ok though, i was lucky someone was here to take the package

have some pics:

(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)

And yes, the ugly USB cable will be replaced

ISO GER, white in-switch LEDs, PBT Vortex set for now ... really waiting for their doubleshot PBT backlit ISOs

Wow, your build looks amazing. Makes me even more excited to get my stuff

Did your PCB happen to come with resistors for the in switch LEDs?

LeandreN · « **Reply #688 on:** Sat, 23 January 2016, 02:55:28 »

Quote from: Numpy on Sat, 23 January 2016, 02:41:30

Quote from: reddragon394 on Fri, 22 January 2016, 23:20:40
Woooo it all came! Thanks LeandreN for this great GB! ... Though you forgot to change my shipping address that i emailed you about Thats ok though, i was lucky someone was here to take the package

have some pics:

(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)

And yes, the ugly USB cable will be replaced

ISO GER, white in-switch LEDs, PBT Vortex set for now ... really waiting for their doubleshot PBT backlit ISOs
Wow, your build looks amazing. Makes me even more excited to get my stuff
Did your PCB happen to come with resistors for the in switch LEDs?

All the PCBs have resistors for switch leds.

LeandreN · « **Reply #689 on:** Sat, 23 January 2016, 06:03:17 »

Quote from: reddragon394 on Fri, 22 January 2016, 23:20:40

Woooo it all came! Thanks LeandreN for this great GB! ... Though you forgot to change my shipping address that i emailed you about Thats ok though, i was lucky someone was here to take the package

have some pics:

(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)

And yes, the ugly USB cable will be replaced

ISO GER, white in-switch LEDs, PBT Vortex set for now ... really waiting for their doubleshot PBT backlit ISOs

That was probably why it took a while, it really shouldnt have taken more than a day. Sorry about that. Your build looks great. Hopefully you like it!

faxe · « **Reply #690 on:** Sat, 23 January 2016, 08:50:16 »

PCB and plate arrived, my cheap transparent aliexpress case needs some dremeling though, so no complete build this weekend

And plans changed back to green plate and dolch because I found the 1.75 right shift I thought I didn't have for the split right shift.

Jumie · « **Reply #691 on:** Sat, 23 January 2016, 09:00:28 »

Will this case also need some dremeling?

http://www.aliexpress.com/store/product/Mini-Keyboard-GH60-plastic-Case-for-60-Mechanical-Keyboard-Compatoble-PBT-Keycaps-Poker2-Pok3r-Faceu-60/1555390_32311183273.html

reddragon394 · « **Reply #692 on:** Sat, 23 January 2016, 11:44:54 »

Quote from: LeandreN on Sat, 23 January 2016, 06:03:17

That was probably why it took a while, it really shouldnt have taken more than a day. Sorry about that. Your build looks great. Hopefully you like it!

i dont think it would have been any faster with the other address, but no worries, its all good now!

And yes, i like the build!

Edit: I seem to just have 6KRO, wasnt the driver claiming to be NKRO? Anyone knowing if there is a setting for it?

faxe · « **Reply #693 on:** Sat, 23 January 2016, 12:00:55 »

Quote from: Jumie on Sat, 23 January 2016, 09:00:28

Will this case also need some dremeling?

http://www.aliexpress.com/store/product/Mini-Keyboard-GH60-plastic-Case-for-60-Mechanical-Keyboard-Compatoble-PBT-Keycaps-Poker2-Pok3r-Faceu-60/1555390_32311183273.html

This is exactly my case (the non mentioned but available transparent version). Further investigation reveals no dremeling neccessary!

FoC_Tow · « **Reply #694 on:** Sat, 23 January 2016, 12:09:13 »

Received my two Pcbs and stabilizers sets yesterday!
Thx a lot LeandreN!

From the looks everything looks pretty much perfect to me!

One little thing tho:
A stabilizer bars escaped the small plastic bag and almost made it out of the box,
but its all good and Im super happy to have some smexy pcbs for upcoming builds!

No issue, just figured Id mention it! =)

TalkingTree · « **Reply #695 on:** Sat, 23 January 2016, 12:58:13 »

Quote from: Jumie on Sat, 23 January 2016, 09:00:28

Will this case also need some dremeling?

http://www.aliexpress.com/store/product/Mini-Keyboard-GH60-plastic-Case-for-60-Mechanical-Keyboard-Compatoble-PBT-Keycaps-Poker2-Pok3r-Faceu-60/1555390_32311183273.html

I owned this case before giving a board to a friend. It's a bit taller than the others and there's more room on the bottom. I guess you don't need any cutting.

TalkingTree · « **Reply #696 on:** Sat, 23 January 2016, 12:59:25 »

Quote from: reddragon394 on Sat, 23 January 2016, 11:44:54

Edit: I seem to just have 6KRO, wasnt the driver claiming to be NKRO? Anyone knowing if there is a setting for it?

It's 6KRO under USB and NKRO on PS2. I guess you can try with an adapter.

Numpy · « **Reply #697 on:** Sat, 23 January 2016, 18:04:54 »

Quote from: LeandreN on Sat, 23 January 2016, 02:55:28

Quote from: Numpy on Sat, 23 January 2016, 02:41:30
Quote from: reddragon394 on Fri, 22 January 2016, 23:20:40
Woooo it all came! Thanks LeandreN for this great GB! ... Though you forgot to change my shipping address that i emailed you about Thats ok though, i was lucky someone was here to take the package

have some pics:

(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)

And yes, the ugly USB cable will be replaced

ISO GER, white in-switch LEDs, PBT Vortex set for now ... really waiting for their doubleshot PBT backlit ISOs
Wow, your build looks amazing. Makes me even more excited to get my stuff
Did your PCB happen to come with resistors for the in switch LEDs?
All the PCBs have resistors for switch leds.

Ok, good to hear! Thanks.
Also, should switches be soldered in before the switch LEDs or other way around?

chancellorr · « **Reply #698 on:** Sat, 23 January 2016, 18:13:29 »

Quote from: Numpy on Sat, 23 January 2016, 18:04:54

Quote from: LeandreN on Sat, 23 January 2016, 02:55:28
Quote from: Numpy on Sat, 23 January 2016, 02:41:30
Quote from: reddragon394 on Fri, 22 January 2016, 23:20:40
Woooo it all came! Thanks LeandreN for this great GB! ... Though you forgot to change my shipping address that i emailed you about Thats ok though, i was lucky someone was here to take the package

have some pics:

(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link)

And yes, the ugly USB cable will be replaced

ISO GER, white in-switch LEDs, PBT Vortex set for now ... really waiting for their doubleshot PBT backlit ISOs
Wow, your build looks amazing. Makes me even more excited to get my stuff
Did your PCB happen to come with resistors for the in switch LEDs?
All the PCBs have resistors for switch leds.
Ok, good to hear! Thanks.
Also, should switches be soldered in before the switch LEDs or other way around?

I always do the switches first.

Jumie · « **Reply #699 on:** Sat, 23 January 2016, 19:45:20 »

Quote from: faxe on Sat, 23 January 2016, 12:00:55

Quote from: Jumie on Sat, 23 January 2016, 09:00:28
Will this case also need some dremeling?

http://www.aliexpress.com/store/product/Mini-Keyboard-GH60-plastic-Case-for-60-Mechanical-Keyboard-Compatoble-PBT-Keycaps-Poker2-Pok3r-Faceu-60/1555390_32311183273.html

This is exactly my case (the non mentioned but available transparent version). Further investigation reveals no dremeling neccessary!

Quote from: TalkingTree on Sat, 23 January 2016, 12:58:13

Quote from: Jumie on Sat, 23 January 2016, 09:00:28
Will this case also need some dremeling?

http://www.aliexpress.com/store/product/Mini-Keyboard-GH60-plastic-Case-for-60-Mechanical-Keyboard-Compatoble-PBT-Keycaps-Poker2-Pok3r-Faceu-60/1555390_32311183273.html
I owned this case before giving a board to a friend. It's a bit taller than the others and there's more room on the bottom. I guess you don't need any cutting.

Ahh so glad to hear no dremeeling necessary. I don't own one..

News:

Author Topic: [GB][FINISHED] Plates, PCBs and stabilisers - LeandreN Round 3 (Read 223379 times)