Author Topic: [GB][CLOSED] LeandreN Round 4, 60% kits, HHKB and winkeyless plates (Read 284760 times)

TalkingTree · « **Reply #650 on:** Sun, 10 April 2016, 10:22:32 »

Quote from: LeandreN on Sun, 10 April 2016, 09:58:52

The first PCB batch may arrive before the plates actually.

Amazing.

axtran · « **Reply #651 on:** Sun, 10 April 2016, 18:33:54 »

I'm excited. I bought three PCBs, three plates... three endgame builds!

Pinecone · « **Reply #652 on:** Mon, 11 April 2016, 04:17:56 »

Quote from: axtran on Sun, 10 April 2016, 18:33:54

I'm excited. I bought three PCBs, three plates... three endgame builds!

One of them better be an orange PCB!

pwnz · « **Reply #653 on:** Mon, 11 April 2016, 07:49:40 »

Is it still possible to use PayPal instead of SEPA? I initially chose SEPA but my bank refuses to accept international payments without me dropping in. That's a PITA for me because of working hours so I'd rather pay the stupid PayPal fee.

What email do I have to send the money to?

axtran · « **Reply #654 on:** Mon, 11 April 2016, 10:12:43 »

Quote from: Pinecone on Mon, 11 April 2016, 04:17:56

One of them better be an orange PCB!

Actually, two Orange PCBs and one Black PCB. Three carbon plates, 183 Linear Zealios... GON' BE GUD

LeandreN · « **Reply #655 on:** Mon, 11 April 2016, 10:18:10 »

Quote from: pwnz on Mon, 11 April 2016, 07:49:40

Is it still possible to use PayPal instead of SEPA? I initially chose SEPA but my bank refuses to accept international payments without me dropping in. That's a PITA for me because of working hours so I'd rather pay the stupid PayPal fee.

What email do I have to send the money to?

Yes, send a mail to support@leandrekeyboards.com

LeandreN · « **Reply #656 on:** Fri, 15 April 2016, 08:08:14 »

Estimates are still under 2-3 months. No changes. Now that will be under 3 months for sure. I have not heard back from GON regarding the production of the PCBs, but I expect to be updated early next week. The plate factory is super busy, and I doubt they will send the plates any earlier than anticipated.

Thanks!

AgentZen · « **Reply #657 on:** Fri, 15 April 2016, 08:09:55 »

Sweet.

JaccoW · « **Reply #658 on:** Fri, 15 April 2016, 08:56:48 »

Just paid my SEPA invoice.

LeandreN · « **Reply #659 on:** Sat, 16 April 2016, 10:30:30 »

Just got an update from GON today. PCBs are in production. Stabilisers are being sorted.

Plates are in queue at the moment.

dorf · « **Reply #660 on:** Sat, 16 April 2016, 10:56:21 »

Quote from: LeandreN on Sat, 16 April 2016, 10:30:30

Just got an update from GON today. PCBs are in production. Stabilisers are being sorted.

Plates are in queue at the moment.

Great news!

flob_ert · « **Reply #661 on:** Sat, 16 April 2016, 11:39:22 »

Thanks for another great group buy!

I have finally finished the hand wire build with the R1 plate and stabs you generously sent me during the R3 group buy. I was going to remind you to add a little extra money to my R4 invoice as a thank you but totally forgot. Let me know how I can send you a thank you or how I can send a separate donation to the charity. I want to spread the good karma

Apologies for poor picture quality... and poor wiring...

ideus · « **Reply #662 on:** Sat, 16 April 2016, 13:27:21 »

Quote from: flob_ert on Sat, 16 April 2016, 11:39:22

Thanks for another great group buy!

I have finally finished the hand wire build with the R1 plate and stabs you generously sent me during the R3 group buy. I was going to remind you to add a little extra money to my R4 invoice as a thank you but totally forgot. Let me know how I can send you a thank you or how I can send a separate donation to the charity. I want to spread the good karma

Apologies for poor picture quality... and poor wiring...

Interesting, what controller do you use? and what keycaps are those?

flob_ert · « **Reply #663 on:** Sat, 16 April 2016, 15:01:32 »

Quote from: ideus on Sat, 16 April 2016, 13:27:21

Quote from: flob_ert on Sat, 16 April 2016, 11:39:22
Thanks for another great group buy!

I have finally finished the hand wire build with the R1 plate and stabs you generously sent me during the R3 group buy. I was going to remind you to add a little extra money to my R4 invoice as a thank you but totally forgot. Let me know how I can send you a thank you or how I can send a separate donation to the charity. I want to spread the good karma

Apologies for poor picture quality... and poor wiring...

Interesting, what controller do you use? and what keycaps are those?

Thank you. I used a teensy 2.0 I bought from banggood, the led is blue instead of red?? so I am not 100% sure it is legit. However it works perfectly and flashed fine using the teensy loader application.

The keycaps are Tai Hao olivette double shot ABS which I bought from mechsupply. I am very impressed with the caps for the price

captsis · « **Reply #664 on:** Tue, 19 April 2016, 00:41:02 »

Quote from: flob_ert on Sat, 16 April 2016, 11:39:22

Thanks for another great group buy!

I have finally finished the hand wire build with the R1 plate and stabs you generously sent me during the R3 group buy. I was going to remind you to add a little extra money to my R4 invoice as a thank you but totally forgot. Let me know how I can send you a thank you or how I can send a separate donation to the charity. I want to spread the good karma

Apologies for poor picture quality... and poor wiring...

What case is that?

TalkingTree · « **Reply #665 on:** Tue, 19 April 2016, 03:13:55 »

Quote from: matt2dlg on Tue, 19 April 2016, 00:41:02

What case is that?

Most likely, this one.

phosphoric · « **Reply #666 on:** Tue, 19 April 2016, 14:13:02 »

will you be shipping orders as they come in, or are you going to wait for all shipments to come in before fulfilling orders? i.e. i only ordered a pcb and stabs; will i need to wait for all of the plates to come in before you ship my pcb and stabs?

LeandreN · « **Reply #667 on:** Tue, 19 April 2016, 14:15:12 »

Quote from: phosphoric on Tue, 19 April 2016, 14:13:02

will you be shipping orders as they come in, or are you going to wait for all shipments to come in before fulfilling orders? i.e. i only ordered a pcb and stabs; will i need to wait for all of the plates to come in before you ship my pcb and stabs?

We will see what I have time for, but I will ship the parts I have.

Bumbibear · « **Reply #668 on:** Wed, 20 April 2016, 16:03:50 »

Will this case be able to properly fit the PCB,plate etc from this groupbuy? looked really fancy!

So hard to determine what case I should use for this!

LeandreN · « **Reply #669 on:** Thu, 21 April 2016, 04:21:17 »

Quote from: Bumbibear on Wed, 20 April 2016, 16:03:50

Will this case be able to properly fit the PCB,plate etc from this groupbuy? looked really fancy!

So hard to determine what case I should use for this!

Seems like it would work

flob_ert · « **Reply #670 on:** Thu, 21 April 2016, 14:25:44 »

Quote from: TalkingTree on Tue, 19 April 2016, 03:13:55

Quote from: matt2dlg on Tue, 19 April 2016, 00:41:02
What case is that?
Most likely, this one.

That is the one. I had hoped my wiring would look better... I still think it looks nice... it has character

axtran · « **Reply #671 on:** Thu, 21 April 2016, 23:01:57 »

Just so you guys know--the NerD 60 has an "Indicator" LED which are two posts that are separate from the switch LEDs. In NerDy GUI, you can set these to do whatever you want them to do (I actually set mine to Caps Lock Indicator). That will require a standard 2-post TH LED, else you can also use a 1206 SMD LED (or 0805, just that it will be more difficult to solder) across the two pins if you're good at soldering.

That being said, Get some heat-shrink that's pretty small in order to get creative with laying the LED on its side so that you can blast some light across the side and out the gap between the plate and the PCB. I'll share what my final setup is (I'm going to blast light into the caps key as it'll be Zealio switches on the build).

LeandreN · « **Reply #672 on:** Fri, 22 April 2016, 01:15:24 »

People who have not paid, please pay now. Thanks.

pichu23 · « **Reply #673 on:** Fri, 22 April 2016, 08:40:13 »

Quote from: axtran on Thu, 21 April 2016, 23:01:57

Just so you guys know--the NerD 60 has an "Indicator" LED which are two posts that are separate from the switch LEDs. In NerDy GUI, you can set these to do whatever you want them to do (I actually set mine to Caps Lock Indicator). That will require a standard 2-post TH LED, else you can also use a 1206 SMD LED (or 0805, just that it will be more difficult to solder) across the two pins if you're good at soldering.

That being said, Get some heat-shrink that's pretty small in order to get creative with laying the LED on its side so that you can blast some light across the side and out the gap between the plate and the PCB. I'll share what my final setup is (I'm going to blast light into the caps key as it'll be Zealio switches on the build).

Can't really picture it in my head but will defo wait for your pics

TalkingTree · « **Reply #674 on:** Fri, 22 April 2016, 08:57:04 »

Shall we see pictures of the PCBs once the first batch is produced?

dorf · « **Reply #675 on:** Fri, 22 April 2016, 09:33:15 »

Yes, please! Gimme some pics.

LeandreN · « **Reply #676 on:** Fri, 22 April 2016, 14:05:05 »

I'll try to get some pictures when the first batch is ready

LeandreN · « **Reply #677 on:** Fri, 22 April 2016, 14:28:24 »

Update

Not much happening now besides waiting for the different parts to arrive.

I think I have some updates from GON regarding the parts next week. Plates are in production.

pichu23 · « **Reply #678 on:** Fri, 22 April 2016, 15:59:12 »

Quote from: LeandreN on Fri, 22 April 2016, 14:28:24

Update

Not much happening now besides waiting for the different parts to arrive.

I think I have some updates from GON regarding the parts next week. Plates are in production.

noice 👌

LeandreN · « **Reply #679 on:** Sat, 23 April 2016, 14:35:10 »

Please pay the payments. Missing two SEPA invoices and 7 PayPal invoices.

LeandreN · « **Reply #680 on:** Mon, 25 April 2016, 14:25:22 »

Update

I just got in a letter a week ago, but didn't have time to open it until today, and since it is meant for all of you too, I will publish it here.

Dear William(me)!

Thanks a lot for your support to cancer course! Your gift of 4500 NOK is an important contribution to our work.

Our work is mainly based on funds raised and gifts, therefore, good support is crucial.

Today, 2 of 3 cancer patients survive and the development and the development is moving in a positive direction. Research on personalized cancer treatment escalates. It's about finding the right treatment for the right patient, and that is not an easy task, because humans are so different.

But no matter who we are or what genes we have, or what life we live, we all want to live a good life - and get the oppertunity to be old. Essentially, this is what cancer research is about: more time and better quality of life for all of us.

Your contribution creates hope! Thousand thanks(Norwegian way of saying "Thanks a lot")!

Kind regards,

Cancer Society

signed
name

Secretary General

Sorry if there are any mistakes in the translation. Some phrases are translated to give a better understanding in English.

Other updates

The first batch of PCBs is shipped to GON already.

The plates are in production, as I stated before. Kind of a long queue as there are many orders, hopefully I will have some news this week.

Stabilisers are taken care of, trust me. I may or may not already have these in my hands.

Let me know if you have any questions!

LeandreN

update on mail coming soon...

pichu23 · « **Reply #681 on:** Mon, 25 April 2016, 14:33:06 »

Quote from: LeandreN on Mon, 25 April 2016, 14:25:22

Update

I just got in a letter a week ago, but didn't have time to open it until today, and since it is meant for all of you too, I will publish it here.

Show Image

Show Image

Dear William(me)!

Thanks a lot for your support to cancer course! Your gift of 4500 NOK is an important contribution to our work.

Our work is mainly based on funds raised and gifts, therefore, good support is crucial.

Today, 2 of 3 cancer patients survive and the development and the development is moving in a positive direction. Research on personalized cancer treatment escalates. It's about finding the right treatment for the right patient, and that is not an easy task, because humans are so different.

But no matter who we are or what genes we have, or what life we live, we all want to live a good life - and get the oppertunity to be old. Essentially, this is what cancer research is about: more time and better quality of life for all of us.

Your contribution creates hope! Thousand thanks(Norwegian way of saying "Thanks a lot")!

Kind regards,

Cancer Society

signed
name

Secretary General

Sorry if there are any mistakes in the translation. Some phrases are translated to give a better understanding in English.

Other updates

The first batch of PCBs is shipped to GON already.

The plates are in production, as I stated before. Kind of a long queue as there are many orders, hopefully I will have some news this week.

Stabilisers are taken care of, trust me. I may or may not already have these in my hands.

Let me know if you have any questions!

LeandreN

update on mail coming soon...

Whoa that letter though. Such a nice gesture.

Thanks for the translation!
and of course the updates

Zanduby · « **Reply #682 on:** Mon, 25 April 2016, 18:43:25 »

Quote from: LeandreN on Mon, 25 April 2016, 14:25:22

Update

I just got in a letter a week ago, but didn't have time to open it until today, and since it is meant for all of you too, I will publish it here.

Show Image

Show Image

Dear William(me)!

Thanks a lot for your support to cancer course! Your gift of 4500 NOK is an important contribution to our work.

Our work is mainly based on funds raised and gifts, therefore, good support is crucial.

Today, 2 of 3 cancer patients survive and the development and the development is moving in a positive direction. Research on personalized cancer treatment escalates. It's about finding the right treatment for the right patient, and that is not an easy task, because humans are so different.

But no matter who we are or what genes we have, or what life we live, we all want to live a good life - and get the oppertunity to be old. Essentially, this is what cancer research is about: more time and better quality of life for all of us.

Your contribution creates hope! Thousand thanks(Norwegian way of saying "Thanks a lot")!

Kind regards,

Cancer Society

signed
name

Secretary General

Sorry if there are any mistakes in the translation. Some phrases are translated to give a better understanding in English.

Other updates

The first batch of PCBs is shipped to GON already.

The plates are in production, as I stated before. Kind of a long queue as there are many orders, hopefully I will have some news this week.

Stabilisers are taken care of, trust me. I may or may not already have these in my hands.

Let me know if you have any questions!

LeandreN

update on mail coming soon...

Yeeee! That's a great note to get back. Thanks for the update! Can't wait for the stuff to arrive so you can start shipping!

mad_eyes · « **Reply #683 on:** Tue, 26 April 2016, 02:31:01 »

Hi LeandreN. Is it too late to switch my plate color from silver to steel?

LeandreN · « **Reply #684 on:** Tue, 26 April 2016, 02:33:22 »

Quote from: mad_eyes on Tue, 26 April 2016, 02:31:01

Hi LeandreN. Is it too late to switch my plate color from silver to steel?

Yes.

mad_eyes · « **Reply #685 on:** Tue, 26 April 2016, 02:36:12 »

Quote from: LeandreN on Tue, 26 April 2016, 02:33:22

Quote from: mad_eyes on Tue, 26 April 2016, 02:31:01
Hi LeandreN. Is it too late to switch my plate color from silver to steel?

Yes.

No problem. Thanks for your quick reply.

LeandreN · « **Reply #686 on:** Tue, 26 April 2016, 02:45:16 »

Looks like I also will be getting some extra PCBs for sale.

Shipping with EMS from GON when he is done testing every single one of them, so I will give him time to do that. We are waiting for the plates. The stabilisers are already here.

Diokhan · « **Reply #687 on:** Tue, 26 April 2016, 02:52:25 »

Quote from: LeandreN on Tue, 26 April 2016, 02:45:16

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Looks like I also will be getting some extra PCBs for sale.

Shipping with EMS from GON when he is done testing every single one of them, so I will give him time to do that. We are waiting for the plates. The stabilisers are already here.

Those are beautiful!
Thanks for the update

mad_eyes · « **Reply #688 on:** Tue, 26 April 2016, 02:53:49 »

Those look great. I can't wait.

Atredl · « **Reply #689 on:** Tue, 26 April 2016, 02:56:09 »

Quote from: LeandreN on Tue, 26 April 2016, 02:45:16

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Looks like I also will be getting some extra PCBs for sale.

Shipping with EMS from GON when he is done testing every single one of them, so I will give him time to do that. We are waiting for the plates. The stabilisers are already here.

What is the "NerD" cutout on the bottom for? Never seen that on another 60% PCB.

dorf · « **Reply #690 on:** Tue, 26 April 2016, 03:23:53 »

Quote from: Atredl on Tue, 26 April 2016, 02:56:09

What is the "NerD" cutout on the bottom for? Never seen that on another 60% PCB.

Bluetooth
http://www.gonskeyboardworks.com/manuals/134-wireless-module-installation.html

dorf · « **Reply #691 on:** Tue, 26 April 2016, 03:24:31 »

Quote from: LeandreN on Tue, 26 April 2016, 02:45:16

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Looks like I also will be getting some extra PCBs for sale.

Shipping with EMS from GON when he is done testing every single one of them, so I will give him time to do that. We are waiting for the plates. The stabilisers are already here.

Nice!

Bumbibear · « **Reply #692 on:** Tue, 26 April 2016, 03:52:39 »

Looking good!

TalkingTree · « **Reply #693 on:** Tue, 26 April 2016, 04:20:36 »

Lovely silkscreened logo on those PCBs, can't wait to have them in my hands.

W_hinklebottom · « **Reply #694 on:** Tue, 26 April 2016, 04:32:34 »

If there are extra PCBs for sale I would be interested in one. Seems I ordered two plates and only one PCB. If I have to wait and buy it from your store that is fine as well.

GoatMaster · « **Reply #695 on:** Tue, 26 April 2016, 06:07:17 »

They look awesome !

GiveCandyy · « **Reply #696 on:** Tue, 26 April 2016, 06:10:02 »

He has to test all of them? I feel sorry for him.. and his built keyboard buyers.

audax989 · « **Reply #697 on:** Tue, 26 April 2016, 09:34:48 »

Awesome! Just order some gateron tactile clears for this board!

LeandreN · « **Reply #698 on:** Tue, 26 April 2016, 09:35:08 »

Quote from: W_hinklebottom on Tue, 26 April 2016, 04:32:34

If there are extra PCBs for sale I would be interested in one. Seems I ordered two plates and only one PCB. If I have to wait and buy it from your store that is fine as well.

Yeah, I need to ship out everything before I start selling more stuff.

LeandreN · « **Reply #699 on:** Tue, 26 April 2016, 09:35:29 »

Quote from: audax989 on Tue, 26 April 2016, 09:34:48

Awesome! Just order some gateron tactile clears for this board!

Where did you get those ?

\|\|\|The Original	\|Home	\|Work	\|Numpad	\|Play	\|Endgame	\|Keycaps
	x
\|Déck Legend Frost	\|Keycool 87 LE	\|Leopold FC660M	\|FC 210TP	\|Raptor K1 Gaming	\|Duck Orion TKL	\|My keycaps & sets
\|Pics	\|Pics	\|Pics		\|Pics	\|Pics	\|Pics

News:

Poll

PCB colour preference, we will have colours, I will decide it in the end, but would love some community input.

Author Topic: [GB][CLOSED] LeandreN Round 4, 60% kits, HHKB and winkeyless plates (Read 284760 times)