Author Topic: [GB][CLOSED] LeandreN Round 4, 60% kits, HHKB and winkeyless plates (Read 285093 times)

tuco · « **Reply #600 on:** Wed, 06 April 2016, 17:15:02 »

Paid too.

cryptokey · « **Reply #601 on:** Wed, 06 April 2016, 17:20:51 »

Paid.

need · « **Reply #602 on:** Wed, 06 April 2016, 17:29:48 »

Anyone here from the UK paying via SEPA ?
Needing some advice, thanks !

swimmingbird · « **Reply #603 on:** Wed, 06 April 2016, 17:46:12 »

**** how did i forget to order

grillatactics · « **Reply #604 on:** Wed, 06 April 2016, 21:02:31 »

Paid!

Quackles · « **Reply #605 on:** Wed, 06 April 2016, 21:04:51 »

Quote from: swimmingbird on Wed, 06 April 2016, 17:46:12

**** how did i forget to order

I forgot too man. Damn Aussie time meant the extra 2 hours was at 5am

LeandreN · « **Reply #606 on:** Thu, 07 April 2016, 00:20:26 »

I sent the payment to GON this morning. 5 minutes later I received this mail.

Diokhan · « **Reply #607 on:** Thu, 07 April 2016, 00:47:35 »

Quote from: LeandreN on Thu, 07 April 2016, 00:20:26

I sent the payment to GON this morning. 5 minutes later I received this mail.

Show Image

That is lightning fast! usually takes him 5 months :p

dorf · « **Reply #608 on:** Thu, 07 April 2016, 01:01:18 »

Paid!

captsis · « **Reply #609 on:** Thu, 07 April 2016, 02:10:00 »

Paid

GoatMaster · « **Reply #610 on:** Thu, 07 April 2016, 02:15:06 »

Paid

zeltner · « **Reply #611 on:** Thu, 07 April 2016, 07:20:29 »

Paid.

LeandreN · « **Reply #612 on:** Thu, 07 April 2016, 10:07:30 »

Hey!

Let me know if anyone hasn't got an invoice yet.

LeandreN

Kalp1 · « **Reply #613 on:** Thu, 07 April 2016, 13:08:55 »

and Paid !

Thank you again for looking at my order.

spanyam · « **Reply #614 on:** Thu, 07 April 2016, 16:28:02 »

How're we doing with paid invoices, LeandreN? 20%? 30%?

LeandreN · « **Reply #615 on:** Thu, 07 April 2016, 16:29:03 »

Quote from: spanyam on Thu, 07 April 2016, 16:28:02

How're we doing with paid invoices, LeandreN? 20%? 30%?

~80%

spanyam · « **Reply #616 on:** Thu, 07 April 2016, 16:52:45 »

Quote from: LeandreN on Thu, 07 April 2016, 16:29:03

Quote from: spanyam on Thu, 07 April 2016, 16:28:02
How're we doing with paid invoices, LeandreN? 20%? 30%?
~80%

That's really impressive for just one day! Good job so far

MrDaddio · « **Reply #617 on:** Thu, 07 April 2016, 18:08:21 »

Paid!
Well done!

audax989 · « **Reply #618 on:** Fri, 08 April 2016, 05:56:47 »

Paid! Woohoo I might just be the first person on Guam to have a custom keyboard. A question though, Does this pcb support rgb backlighting? If so, how and what would I need?

LeandreN · « **Reply #619 on:** Fri, 08 April 2016, 06:15:48 »

Plate manufacturer is paid. GON is paid. Waiting for production to start.

Auxo · « **Reply #620 on:** Fri, 08 April 2016, 07:26:16 »

Quote from: LeandreN on Fri, 08 April 2016, 06:15:48

Plate manufacturer is paid. GON is paid. Waiting for production to start.

That was incredibly quick, thank you

AgentZen · « **Reply #621 on:** Fri, 08 April 2016, 09:12:00 »

All Paid up. Thank you Leandren and everyone else! Can't wait.

AgentZen · « **Reply #622 on:** Fri, 08 April 2016, 09:17:27 »

Kinda curious what aluminum cases others have gone with. I picked up the aluminum gh60 case on taobao.

TalkingTree · « **Reply #623 on:** Fri, 08 April 2016, 10:30:48 »

Quote from: AgentZen on Fri, 08 April 2016, 09:17:27

Kinda curious what aluminum cases others have gone with. I picked up the aluminum gh60 case on taobao.

Link please?

Xiro7 · « **Reply #624 on:** Fri, 08 April 2016, 10:57:24 »

Quote from: AgentZen on Fri, 08 April 2016, 09:17:27

Kinda curious what aluminum cases others have gone with. I picked up the aluminum gh60 case on taobao.

I bought an orange aluminum TEX case. I have an orange PCB + carbon fiber plate coming with this order. Going to use Zealios switches, white LED's and throw on Troubled Minds keycaps with it.

spanyam · « **Reply #625 on:** Fri, 08 April 2016, 11:06:30 »

Quote from: Xiro7 on Fri, 08 April 2016, 10:57:24

Quote from: AgentZen on Fri, 08 April 2016, 09:17:27
Kinda curious what aluminum cases others have gone with. I picked up the aluminum gh60 case on taobao.

I bought an orange aluminum TEX case. I have an orange PCB + carbon fiber plate coming with this order. Going to use Zealios switches, white LED's and throw on Troubled Minds keycaps with it.

That sounds like it'll turn out to be a beautiful board.

Dernubenfrieken · « **Reply #626 on:** Fri, 08 April 2016, 13:01:38 »

I'm thinking of a ziptyze case, with a bit of painting to go with it for the GID/UV reactive goodness.

LeandreN · « **Reply #627 on:** Fri, 08 April 2016, 13:15:19 »

Quote from: Dernubenfrieken on Fri, 08 April 2016, 13:01:38

I'm thinking of a ziptyze case, with a bit of painting to go with it for the GID/UV reactive goodness.

Good idea! The cases are great

biocalves · « **Reply #628 on:** Fri, 08 April 2016, 13:44:14 »

Does this PCB have the same lineup as the Pok3r boards? Wondering if Datamancer's Pok3r wood cases will work.

https://www.massdrop.com/buy/pok3r-wood-case

yomammary · « **Reply #629 on:** Fri, 08 April 2016, 15:25:37 »

Quote from: biocalves on Fri, 08 April 2016, 13:44:14

Does this PCB have the same lineup as the Pok3r boards? Wondering if Datamancer's Pok3r wood cases will work.

https://www.massdrop.com/buy/pok3r-wood-case

Not 100% sure but I think so.

Willyc277 · « **Reply #630 on:** Fri, 08 April 2016, 16:15:15 »

I'm going full-Commie for this build. Red HHKB plate, Gateron blacks with clear tops, red Hammer replica case:

Topped off with Shadovveds RU red and black dyesubs:

Can't even tell you how pumped I am to finally build with the HHKB layout. Thanks LeandreN!!!!!

feediko · « **Reply #631 on:** Fri, 08 April 2016, 16:56:39 »

Quote from: Willyc277 on Fri, 08 April 2016, 16:15:15

red Hammer replica case:
Show Image

That's the case I want to get but in purple. Where did you order it? Is the only source taobao with a proxy?
https://world.taobao.com/item/45583361638.htm?spm=a312a.7700714.0.0.AQXEs1#detail

Willyc277 · « **Reply #632 on:** Fri, 08 April 2016, 17:23:38 »

Quote from: feediko on Fri, 08 April 2016, 16:56:39

Quote from: Willyc277 on Fri, 08 April 2016, 16:15:15
red Hammer replica case:
Show Image

That's the case I want to get but in purple. Where did you order it? Is the only source taobao with a proxy?
https://world.taobao.com/item/45583361638.htm?spm=a312a.7700714.0.0.AQXEs1#detail

Got it in the classifieds here, couldn't help you find you :( good luck! It's pretty hefty!

AgentZen · « **Reply #633 on:** Fri, 08 April 2016, 19:02:07 »

Quote from: TalkingTree on Fri, 08 April 2016, 10:30:48

Quote from: AgentZen on Fri, 08 April 2016, 09:17:27
Kinda curious what aluminum cases others have gone with. I picked up the aluminum gh60 case on taobao.
Link please?

This is the case I bought off taobao:

Please forgive the awkward angle, this is the picture the proxy sent me.

Color is called "titanium gray". I think I got it within about 2 weeks. I used Bhiner as a proxy. It was around $70-$80 after paying proxy and shipping. I am pretty pleased.

I'll be using 65g zealios and BSP blanks/RGB set with a black winkeyless plate.

This is a link to the taobao listing of the seller I bought from: https://world.taobao.com/item/524317609075.htm#detail

Porkins · « **Reply #634 on:** Fri, 08 April 2016, 21:19:37 »

Quote from: AgentZen on Fri, 08 April 2016, 19:02:07

Quote from: TalkingTree on Fri, 08 April 2016, 10:30:48
Quote from: AgentZen on Fri, 08 April 2016, 09:17:27
Kinda curious what aluminum cases others have gone with. I picked up the aluminum gh60 case on taobao.
Link please?

This is the case I bought off taobao:
Show Image

Please forgive the awkward angle, this is the picture the proxy sent me.

Color is called "titanium gray". I think I got it within about 2 weeks. I used Bhiner as a proxy. It was around $70-$80 after paying proxy and shipping. I am pretty pleased.

I'll be using 65g zealios and BSP blanks/RGB set with a black winkeyless plate.

This is a link to the taobao listing of the seller I bought from: https://world.taobao.com/item/524317609075.htm#detail

Are you using the plate mounted 65g from the round 2 gb?

AgentZen · « **Reply #635 on:** Sat, 09 April 2016, 00:10:23 »

I just got the standard switches. I actually started with 100 67g switches. Decided to switch 75 of them to 65g after doing a bit more research, didn't really think about the plate mounted 65g switches.

pichu23 · « **Reply #636 on:** Sat, 09 April 2016, 03:52:11 »

Quote from: AgentZen on Fri, 08 April 2016, 09:17:27

Kinda curious what aluminum cases others have gone with. I picked up the aluminum gh60 case on taobao.

Gonna use one of this.

Vortex 60% alu case. Got it like 2 years back lol. Didn't manage to find a proper use for it until now.

LeandreN · « **Reply #637 on:** Sat, 09 April 2016, 04:20:45 »

Update

GON sent a mail confirming that he placed the order to the PCB the day I paid. Everything looks to be on schedule at this point of time. I will send out an update mail tonight. Everybody should have got their invoice by now, please message me if this isn't true.

LeandreN · « **Reply #638 on:** Sat, 09 April 2016, 15:08:23 »

550 USD donated to the Norwegian Cancer Society.

This is amazing, thanks a lot for your support. There are a few remaining payments, so we might get 50-100 USD more.

Thanks!

Willyc277 · « **Reply #639 on:** Sat, 09 April 2016, 16:30:27 »

Quote from: LeandreN on Sat, 09 April 2016, 15:08:23

Show Image

550 USD donated to the Norwegian Cancer Society.

This is amazing, thanks a lot for your support. There are a few remaining payments, so we might get 50-100 USD more.

Thanks!

Wow, that is impressive! Thank YOU for setting it up!

cmd · « **Reply #640 on:** Sat, 09 April 2016, 17:37:54 »

Quote from: LeandreN on Sat, 09 April 2016, 15:08:23

Show Image

550 USD donated to the Norwegian Cancer Society.

This is amazing, thanks a lot for your support. There are a few remaining payments, so we might get 50-100 USD more.

Thanks!

You are a very good person for doing this. I had three family members that had breast cancer. My girlfriend had two family members with ovarian cancer. I should have donated more.

AgentZen · « **Reply #641 on:** Sat, 09 April 2016, 21:32:50 »

Quote from: cmd on Sat, 09 April 2016, 17:37:54

Quote from: LeandreN on Sat, 09 April 2016, 15:08:23
Show Image

550 USD donated to the Norwegian Cancer Society.

This is amazing, thanks a lot for your support. There are a few remaining payments, so we might get 50-100 USD more.

Thanks!

You are a very good person for doing this. I had three family members that had breast cancer. My girlfriend had two family members with ovarian cancer. I should have donated more.

Agreed. I feel bad for not giving more. Leandre, is there a way for us to donate on our own? I looked but found nothing specific. Of course we can always donate to our own personal or local charities.

pichu23 · « **Reply #642 on:** Sun, 10 April 2016, 03:18:07 »

Quote from: LeandreN on Sat, 09 April 2016, 15:08:23

Show Image

550 USD donated to the Norwegian Cancer Society.

This is amazing, thanks a lot for your support. There are a few remaining payments, so we might get 50-100 USD more.

Thanks!

That's a pretty nice amount. Good gesture nevertheless. :)

LeandreN · « **Reply #643 on:** Sun, 10 April 2016, 09:10:14 »

Quote from: cmd on Sat, 09 April 2016, 17:37:54

Quote from: LeandreN on Sat, 09 April 2016, 15:08:23
Show Image

550 USD donated to the Norwegian Cancer Society.

This is amazing, thanks a lot for your support. There are a few remaining payments, so we might get 50-100 USD more.

Thanks!

You are a very good person for doing this. I had three family members that had breast cancer. My girlfriend had two family members with ovarian cancer. I should have donated more.

Sorry to hear about these things.

Thanks a lot for your support!

LeandreN · « **Reply #644 on:** Sun, 10 April 2016, 09:12:15 »

Quote from: AgentZen on Sat, 09 April 2016, 21:32:50

Quote from: cmd on Sat, 09 April 2016, 17:37:54
Quote from: LeandreN on Sat, 09 April 2016, 15:08:23
Show Image

550 USD donated to the Norwegian Cancer Society.

This is amazing, thanks a lot for your support. There are a few remaining payments, so we might get 50-100 USD more.

Thanks!

You are a very good person for doing this. I had three family members that had breast cancer. My girlfriend had two family members with ovarian cancer. I should have donated more.

Agreed. I feel bad for not giving more. Leandre, is there a way for us to donate on our own? I looked but found nothing specific. Of course we can always donate to our own personal or local charities.

Thanks man!

https://kreftforeningen.no/stott-kreftforeningen/

Here is the donation page, but I don't think you can donate from outside Norway. I would be happy to add a donation via PayPal for you since I am going to donate more later.

LeandreN · « **Reply #645 on:** Sun, 10 April 2016, 09:15:26 »

Update

Just got a message from GON. Together, we decided that GONs shipment will be seperated into 3 shipments to try to avoid overvalued import taxes.

TalkingTree · « **Reply #646 on:** Sun, 10 April 2016, 09:22:24 »

Quote from: LeandreN on Sun, 10 April 2016, 09:15:26

Just got a message from GON. Together, we decided that GONs shipment will be seperated into 3 shipments to try to avoid overvalued import taxes.

In different dates, I assume.
I guess it's a good move because he has the time to test PCBs in batches.

LeandreN · « **Reply #647 on:** Sun, 10 April 2016, 09:23:30 »

Quote from: TalkingTree on Sun, 10 April 2016, 09:22:24

Quote from: LeandreN on Sun, 10 April 2016, 09:15:26
Just got a message from GON. Together, we decided that GONs shipment will be seperated into 3 shipments to try to avoid overvalued import taxes.
In different dates, I assume.
I guess it's a good move because he has the time to test PCBs in batches.

Yes. Stabilisers will be sent first. Then PCB batch 1, then PCB batch 2.

TalkingTree · « **Reply #648 on:** Sun, 10 April 2016, 09:36:20 »

I guess it's safe to assume that plates will arrive long before PCBs, so we can expect the first orders to be shipped out from you as soon as the first batch of PCBs arrive.

LeandreN · « **Reply #649 on:** Sun, 10 April 2016, 09:58:52 »

Quote from: TalkingTree on Sun, 10 April 2016, 09:36:20

I guess it's safe to assume that plates will arrive long before PCBs, so we can expect the first orders to be shipped out from you as soon as the first batch of PCBs arrive.

The first PCB batch may arrive before the plates actually. At this point, I do not have enough information to conclude.

News:

Poll

PCB colour preference, we will have colours, I will decide it in the end, but would love some community input.

Author Topic: [GB][CLOSED] LeandreN Round 4, 60% kits, HHKB and winkeyless plates (Read 285093 times)