Author Topic: [Ergodox] Draws too much current (Read 1358 times)

layornos · « **on:** Thu, 30 June 2016, 02:18:32 »

Hi,

i run in a really strange problem with my Ergodox. After upgrading to a "better" 3,5mm cable[1] i got the error message, that the USB port is drawing too much power. After a few seconds, the computer freezes and i had to manually shut it down. After the second try, my pc won't power up. I had to change the power supply. With a no-name, cheap 3,5mm cable, there is no problem.

And my second problem is, that i have to replug the keyboard after a regular reboot, otherwise it won't register keystrokes.

Cheers
layornos

[1] https://www.amazon.de/Sentivus-Premium-vergoldet-Spiral-Kabel-Stecker/dp/B00PYIRL3M/ref=sr_1_6?s=ce-de&ie=UTF8&qid=1467269892&sr=1-6&keywords=3+5mm+spiralkabel

suicidal_orange · « **Reply #1 on:** Thu, 30 June 2016, 02:23:03 »

Is the new cable a TRRS? Sounds like it's only a TRS so is causing a short. It should have 3 black bands around it (sorry if this is babying you, had to check

))

layornos · « **Reply #2 on:** Thu, 30 June 2016, 02:49:52 »

Damn, you are right. I did not ckeck that... the fancy shiny connectors got me at first sight xD

suicidal_orange · « **Reply #3 on:** Thu, 30 June 2016, 02:52:36 »

Oh dear, not sure if that causes permanent damage - I hope not!

layornos · « **Reply #4 on:** Thu, 30 June 2016, 09:20:53 »

The keyboard and PC works fine, until now at least. 😃

News:

Author Topic: [Ergodox] Draws too much current (Read 1358 times)

layornos

[Ergodox] Draws too much current

suicidal_orange

Re: [Ergodox] Draws too much current

layornos

Re: [Ergodox] Draws too much current

suicidal_orange

Re: [Ergodox] Draws too much current

layornos

Re: [Ergodox] Draws too much current


120/100g linear Zealio R1 GMK Hyperfuse 'Split everything' perfection	MX Clear SA Hack'd by Geeks EasyAVR mod