[GB][FINISHED] Mekanisk Group Buy / LeandreN round 5

[johuu]

Hi Guys,
can someone tell me if the Nerd60 NerdyGUI to configure the PCB allows for features like one-shot modifiers and tap-dance?
I've ordered one of the white PCB's and did not find any information on this on GON's site/Reddit.

I'm 99% certain it doesn't. Someone did manage to get QMK to run on GON's boards which would allow this but it wasn't particularly straightforward.

Actually it's not that complicated to run TMK or QMK on NerD boards. I run TMK on all my NerD60 boards and am very happy about this.
This guide is quite detailed https://deskthority.net/wiki/Converting_NerD60_to_TMK
I know MrRooks managed to port NerD to QMK, I didn't had the time to play with QMK but it's on my TO-DO list.
IMHO it's totally worth doing this mod.

Just ordered an USBasp to try this as soon as I feel confident/careless enough to take the risk 
Thanks for your help.

Could you please provide a link from where you bought it?

http://www.fischl.de/usbasp/

There is a link on his site to buy them off eBay (official ones) - it's what I used when I ordered mine.

Thanks.

[LeandreN]

Updated the list and sent out some shipping notifications and payment request for tracked orders.

Shipping a few more tracked orders today, and then I will continue to pack and ship this weekend.

Thanks for your patience, I will try to make my system even better the next round, since its kinda innefficient.

[LeandreN]

Updates,

the extra HHKB steel plates should be coming in tomorrow or saturday, and I will ship them out shortly after. So TalkingTree ++ can look forward to his order soon.



Packing, packing, packing.

[TalkingTree]

the extra HHKB steel plates should be coming in tomorrow or saturday, and I will ship them out shortly after. So TalkingTree ++ can look forward to his order soon.

Thank you mate. I haven't paid them yet. Don't forget to invoice me.

[LeandreN]

the extra HHKB steel plates should be coming in tomorrow or saturday, and I will ship them out shortly after. So TalkingTree ++ can look forward to his order soon.

Thank you mate. I haven't paid them yet. Don't forget to invoice me.

If you insist then, I'll invoice you.

Later.

[dorf]

Show Image

Yes, thank you! Now it's not so far away to Sweden.

Yours shipped today!

Got it!

Can't wait for pictures and build log.

Teaser...

[LeandreN]

Show Image

Yes, thank you! Now it's not so far away to Sweden.

Yours shipped today!

Got it!

Can't wait for pictures and build log.

Teaser...

Show Image

Hype!

Mind if I share to my Instagram?

[dorf]

Show Image

Yes, thank you! Now it's not so far away to Sweden.

Yours shipped today!

Got it!

Can't wait for pictures and build log.

Teaser...

Show Image

Hype!

Mind if I share to my Instagram?

Go ahead! Tag me @waldauj79

[eddible]

Aw jealous, I'm hoping my bits arrive on Monday!

[LeandreN]

Aw jealous, I'm hoping my bits arrive on Monday!

Should be there next week 

[eddible]

Aw jealous, I'm hoping my bits arrive on Monday!

Should be there next week 

Excellent! I'm not actually using the PCB (for now) but the blue plate is going on a Winkeyless build I have going.

[FailiX]

Just a quick question: do you send the pcb's that go to Germany without tracking via registered mail? Haven't been away today and they tried to deliver a registered mail. Since I am only expecting on the pcb and an USBasp device, I wonder which of both would have been in the mail. Would be too sad if I missed the delivery of the PCB ;(

[LeandreN]

Just a quick question: do you send the pcb's that go to Germany without tracking via registered mail? Haven't been away today and they tried to deliver a registered mail. Since I am only expecting on the pcb and an USBasp device, I wonder which of both would have been in the mail. Would be too sad if I missed the delivery of the PCB ;(

I am.not sure what you mean by registered, but I would guess it is the USB device

[FailiX]

Just a quick question: do you send the pcb's that go to Germany without tracking via registered mail? Haven't been away today and they tried to deliver a registered mail. Since I am only expecting on the pcb and an USBasp device, I wonder which of both would have been in the mail. Would be too sad if I missed the delivery of the PCB ;(

I am.not sure what you mean by registered, but I would guess it is the USB device

Registered mail is mail where only the recipient is allowed to accept the package. Aliexpress usually sends packages to Germany like that.

[LeandreN]

Just a quick question: do you send the pcb's that go to Germany without tracking via registered mail? Haven't been away today and they tried to deliver a registered mail. Since I am only expecting on the pcb and an USBasp device, I wonder which of both would have been in the mail. Would be too sad if I missed the delivery of the PCB ;(

I am.not sure what you mean by registered, but I would guess it is the USB device

Registered mail is mail where only the recipient is allowed to accept the package. Aliexpress usually sends packages to Germany like that.

Oh signed. Yeah that's most certainly your USB device

[eddible]

Ah I received my PCB but I've received the wrong colour plate! I've emailed you.

[ctzn_voyager]

Just finished a build using the minty PCB and steel plate... what a difference the plate makes compared to aluminum.

[LeandreN]

Just finished a build using the minty PCB and steel plate... what a difference the plate makes compared to aluminum.

Hi dude! Can't wait for some pictures.

Just built a steel one myself
Feels amazing with linears.

[ctzn_voyager]

Here's a few!



Out with the old guts, in with the new...






My helper sneaking in the pic...


and with caps

[LeandreN]

Here's a few!

Show Image

Out with the old guts, in with the new...

Show Image

Show Image

Show Image

My helper sneaking in the pic...

Show Image

and with caps

Show Image

Fantastic pictures, as always, keep up the great work! Looks so good.

[Sempre]

Here's a few!

Show Image

Out with the old guts, in with the new...

Show Image

Show Image

Show Image

My helper sneaking in the pic...

Show Image

and with caps

Show Image

Looks so fresh. I can feel the mintness!

[poolside]

Good looking PCB indeed. Which kind of case is this? FMJ?

[LeandreN]

Here's a few!

Show Image

Out with the old guts, in with the new...

Show Image

Show Image

Show Image

My helper sneaking in the pic...

Show Image

and with caps

Show Image

Mind if I share on my IG?

[ctzn_voyager]

Here's a few!

Show Image

Out with the old guts, in with the new...

Show Image

Show Image

Show Image

My helper sneaking in the pic...

Show Image

and with caps

Show Image

Mind if I share on my IG?

Not at all, feel free to tag me there (@blake_buettner)

[ctzn_voyager]

Good looking PCB indeed. Which kind of case is this? FMJ?

Good eye, it is an FMJ

[Captainbuttmonkey]

Here's a few!

Show Image

Out with the old guts, in with the new...

Show Image

Show Image

Show Image

My helper sneaking in the pic...

Show Image

and with caps

Show Image

I don't usually like Hyperfuse, but my god this is beautiful.

You may have changed my mind...

[Owntrolf]

I hope I see the shipping status turn into a yes on Monday 

[LeandreN]

Arghh why did so many of you go with tracked orders...

I got out two orders today(tracked orders takes a lot of paperwork).

I will keep getting orders out this week, but will focus on the untracked first now.


L

[Brammm87]

Lol, so happy I chose untracked. I know the package will show up one of these days. It's like a mini surprise present:D

[LeandreN]

Lol, so happy I chose untracked. I know the package will show up one of these days. It's like a mini surprise present:D

I know you are trying to look good in public, but you are listed as tracked in the list, lol.

Your order is out though, and I'll get you the tracking number sometime. Later.

[eksuen]

Lol, so happy I chose untracked. I know the package will show up one of these days. It's like a mini surprise present:D

I know you are trying to look good in public, but you are listed as tracked in the list, lol.

Your order is out though, and I'll get you the tracking number sometime. Later.

Called out.

[poolside]

Good looking PCB indeed. Which kind of case is this? FMJ?

Good eye, it is an FMJ

That last pic with the marbled background is gorgeous. 

[Brammm87]

Lol, so happy I chose untracked. I know the package will show up one of these days. It's like a mini surprise present:D

I know you are trying to look good in public, but you are listed as tracked in the list, lol.

Your order is out though, and I'll get you the tracking number sometime. Later.

My invoice says "untracked" though

[LeandreN]

Lol, so happy I chose untracked. I know the package will show up one of these days. It's like a mini surprise present:D

I know you are trying to look good in public, but you are listed as tracked in the list, lol.

Your order is out though, and I'll get you the tracking number sometime. Later.

My invoice says "untracked" though

Yeah as said earlier I invoices the tracking wrong, I'll be in contact to see if there hose are willing to add the little extra, if not I'll just have to deal with it, as it is my fault.

[FailiX]

The PCB and stabilizers arrived. Thanks a ton!

[murkey]

Your item cleared United States Customs at 10:26 am on January 24, 2017.

Dun. Dun. DUNNNNN!

[LeandreN]

The PCB and stabilizers arrived. Thanks a ton!

Thanks for posting

[LeandreN]

Your item cleared United States Customs at 10:26 am on January 24, 2017.

Dun. Dun. DUNNNNN!

That sounds like great news to me

[LeandreN]

Hey.

I updated the sheet with a few more orders that have shipped.

Will pack a bunch more orders before I ship next

[LeandreN]

Ordered a high quality label printer. Going to get into excel and word and remove a lot of the manual labour. Thanks for bearing with me here. Hope that those that have got their orders are happy, and I would love to see pictures posted.

Sent from my Nexus 5X using Tapatalk

[LeandreN]

Also, if you are interested in my projects @mekaniskco on Instagram is where I post new stuff often.

Sent from my Nexus 5X using Tapatalk

[ReadmeDotTxt]

Ordered a high quality label printer. Going to get into excel and word and remove a lot of the manual labour. Thanks for bearing with me here. Hope that those that have got their orders are happy, and I would love to see pictures posted.

Sent from my Nexus 5X using Tapatalk

Efficiency +11

[FailiX]

Just wanted to post pics of my finished build.
I used these components:
- LeandreN R5\GON NerD60 PCB
- LeandreN R5 sandblasted steel plate
- 65g R4 Zealios & Gateron Yellows
- Pok3r aluminum case (want to get this sandblasted soon)
- HOLTITES for easy switch swapping (they fit very very tight with the PCB but it works)
- GMK Carbon
- No LEDs, bc this will be the keeb that I use at work most of the time. (Maybe I'll add indicator LEDs for layers later)



Thank you LeandreN for making this possible!

[eddible]

Many thanks LeandreN for my replacement blue plate, I've now been able to finish my build!

• Blue Aluminium plate from the GB
• Winkeyless b.face X2 PCB
• Lubed 62g Zealios
• Lubed Zeal Gold Stabilisers (amazing)
• TriC60 Case

I just quickly took these photos with my iPhone but I'll probably take some nicer ones with my SLR when I'm home over the weekend. Still not sure what to do with my teal PCB. I've been making acrylic cases so I may look into something that's fairly transparent, it seems a shame to build the board and the never see that gorgeous teal!

[LeandreN]

Just wanted to post pics of my finished build.
I used these components:
- LeandreN R5\GON NerD60 PCB
- LeandreN R5 sandblasted steel plate
- 65g R4 Zealios & Gateron Yellows
- Pok3r aluminum case (want to get this sandblasted soon)
- HOLTITES for easy switch swapping (they fit very very tight with the PCB but it works)
- GMK Carbon
- No LEDs, bc this will be the keeb that I use at work most of the time. (Maybe I'll add indicator LEDs for layers later)

Show Image

Show Image

Thank you LeandreN for making this possible!

Thanks to you for posting. Love the idea of holtites, and GMK carbon is fantastic. Great work.

Many thanks LeandreN for my replacement blue plate, I've now been able to finish my build!

• Blue Aluminium plate from the GB
• Winkeyless b.face X2 PCB
• Lubed 62g Zealios
• Lubed Zeal Gold Stabilisers (amazing)
• TriC60 Case

I just quickly took these photos with my iPhone but I'll probably take some nicer ones with my SLR when I'm home over the weekend. Still not sure what to do with my teal PCB. I've been making acrylic cases so I may look into something that's fairly transparent, it seems a shame to build the board and the never see that gorgeous teal!

Thanks for posting. Love the photos, but some really high end pictures are always good. Glad you got the replacement fast.

[LeandreN]

Printed out a lot of labels with the labelprinter today.

Will be packing a lot tomorrow. I will also be in contact with those that choosed tracked orders, at it is likely you have not been charged for it.

Thanks for your patience.

[LeandreN]

[LeandreN]

Shipped a lot of packages today. Thanks to the new labelprinter!

Last batch on Monday or Tuesday

Sent from my Nexus 5X using Tapatalk

[DanielT]

And it's here:



Love the PCB, it's perfect! and shipping was fast too 
Now it's time to build the board.

Thanks for a smooth GB 

[LeandreN]

And it's here:

Show Image

Love the PCB, it's perfect! and shipping was fast too  :eek:
Now it's time to build the board.

Thanks for a smooth GB  :thumb:

Thanks for posting and supporting my group buys!