Author Topic: [GB] 75% Aluminum Case (Shipping) (Read 129195 times)

r5d · « **Reply #250 on:** Mon, 06 March 2017, 03:18:03 »

Yeah, let's move this along!

bdtbinh · « **Reply #251 on:** Mon, 06 March 2017, 21:31:12 »

Hi everyone,

Sorry for the very late reply. I have some trouble with job changing for the past few days. I will finish the current job this week and have 1 free week before starting the new one. So next week i will fully dedicate to finish the remain packaging and ship 80% of orders.
Some have already filed the complaint to Paypal and i think it is your right to do it, since it's been to long for the waiting due to my miscalculated timing.

Again, so sorry for your inconvenience

Thumper_ · « **Reply #252 on:** Mon, 06 March 2017, 23:55:23 »

Btw, can you give details about the shipping? Is it express due to the high price ?

bdtbinh · « **Reply #253 on:** Mon, 06 March 2017, 23:59:20 »

Quote from: Thumper_ on Mon, 06 March 2017, 23:55:23

Btw, can you give details about the shipping? Is it express due to the high price ?

Yes, it's express. Expect delivery time after shipping is < 1 week.

wodan · « **Reply #254 on:** Tue, 07 March 2017, 00:02:18 »

Thanks for the update. Yo still have ~1 month before I have to open my case to stay within buyer protection, I hope you can make it in this time.

Thumper_ · « **Reply #255 on:** Tue, 07 March 2017, 00:05:59 »

Quote from: bdtbinh on Mon, 06 March 2017, 23:59:20

Quote from: Thumper_ on Mon, 06 March 2017, 23:55:23
Btw, can you give details about the shipping? Is it express due to the high price ?

Yes, it's express. Expect delivery time after shipping is < 1 week.

Appreciate it!

Petch · « **Reply #256 on:** Sun, 12 March 2017, 20:54:24 »

Update?

Unforgivable · « **Reply #257 on:** Sun, 12 March 2017, 21:21:43 »

Quote from: Petch on Sun, 12 March 2017, 20:54:24

Update?

I second this. An update would be nice.

bdtbinh · « **Reply #258 on:** Mon, 13 March 2017, 05:05:17 »

Hi everyone,

I started shipping from today and some have received the tracking number. Due to the transport service, it can come sooner or later but within 1 weeks after you received tracking. And please inform me when you get the package safely

eddible · « **Reply #259 on:** Mon, 13 March 2017, 05:06:17 »

Amazing! Will we get tracking in a PM on here or email?

bdtbinh · « **Reply #260 on:** Mon, 13 March 2017, 05:07:55 »

Quote from: eddible on Mon, 13 March 2017, 05:06:17

Amazing! Will we get tracking in a PM on here or email?

I will send through email cause gh pm is messing sometimes

wodan · « **Reply #261 on:** Mon, 13 March 2017, 05:10:23 »

Just got my tracking number, scheduled for local delivery tomorrow

wodan · « **Reply #262 on:** Mon, 13 March 2017, 05:13:24 »

Quote from: wodan on Mon, 13 March 2017, 05:10:23

Just got my tracking number, scheduled for local delivery tomorrow

LOL I just received it.

eddible · « **Reply #263 on:** Mon, 13 March 2017, 05:14:07 »

Quote from: wodan on Mon, 13 March 2017, 05:13:24

Quote from: wodan on Mon, 13 March 2017, 05:10:23
Just got my tracking number, scheduled for local delivery tomorrow

LOL I just received it.

Oh my... Pics?!

Thumper_ · « **Reply #264 on:** Mon, 13 March 2017, 05:17:44 »

Come on, want to have mine tomorrow as well or I Rob Wodan

wodan · « **Reply #265 on:** Mon, 13 March 2017, 05:26:14 »

For some reason I got purple. Maybe I ordered that? 2016 was a wreck of a year ...

Looks nice with the carbon plate though:

Packing was solid, weight came screwed in and all party were packed in a way they couldn't hit each other. I did not find any anodizing defects or dents:

eddible · « **Reply #266 on:** Mon, 13 March 2017, 05:27:17 »

Looks good! Although the original post said the ISO plate would support switchtop removal so that's a shame.

Thumper_ · « **Reply #267 on:** Mon, 13 March 2017, 05:28:40 »

Quote from: eddible on Mon, 13 March 2017, 05:27:17

Looks good! Although the original post said the ISO plate would support switchtop removal so that's a shame.

Wait what?
I mean, I'll use Holtite sockets, but still, it's a bummer.

eddible · « **Reply #268 on:** Mon, 13 March 2017, 05:32:04 »

Quote from: Thumper_ on Mon, 13 March 2017, 05:28:40

Quote from: eddible on Mon, 13 March 2017, 05:27:17
Looks good! Although the original post said the ISO plate would support switchtop removal so that's a shame.
Wait what?
I mean, I'll use Holtite sockets, but still, it's a bummer.

Well it looks like plain square cut outs on the plate so I don't think that'll support it. In the original images, the carbon plate (although not the right size) had the cut outs for switchtop removal.

Thumper_ · « **Reply #269 on:** Mon, 13 March 2017, 05:34:02 »

Quote from: eddible on Mon, 13 March 2017, 05:32:04

Quote from: Thumper_ on Mon, 13 March 2017, 05:28:40
Quote from: eddible on Mon, 13 March 2017, 05:27:17
Looks good! Although the original post said the ISO plate would support switchtop removal so that's a shame.
Wait what?
I mean, I'll use Holtite sockets, but still, it's a bummer.

Well it looks like plain square cut outs on the plate so I don't think that'll support it. In the original images, the carbon plate (although not the right size) had the cut outs for switchtop removal.

Maybe its still possible and those are just wider? although than there could be wobble. Wodan, can you check?

Just confirmed with wodan. No switch top removal.

Petch · « **Reply #270 on:** Mon, 13 March 2017, 05:44:58 »

bdtbinh · « **Reply #271 on:** Mon, 13 March 2017, 05:46:07 »

The removable plate sample was good, but the final product is not... So i asked them to reproduce and change to non-removable. It was their 1st time doing this stuff so the removable kinda too hard for them. If you are not happy with that, just leave me a msg and i will find a way to sort thing out

Petch · « **Reply #272 on:** Mon, 13 March 2017, 05:47:07 »

Is that backspace even capable of being split into 2 1U keys? It looks way too thin on the bottom border

eddible · « **Reply #273 on:** Mon, 13 March 2017, 05:49:16 »

Quote from: Petch on Mon, 13 March 2017, 05:47:07

Is that backspace even capable of being split into 2 1U keys? It looks way too thin on the bottom border

You'd probably just want to make sure you used 5 pin switches to give them the extra stability.

Petch · « **Reply #274 on:** Mon, 13 March 2017, 05:50:00 »

Quote from: eddible on Mon, 13 March 2017, 05:49:16

Quote from: Petch on Mon, 13 March 2017, 05:47:07
Is that backspace even capable of being split into 2 1U keys? It looks way too thin on the bottom border

You'd probably just want to make sure you used 5 pin switches to give them the extra stability.

Already bought all my switches (zeal)

wodan · « **Reply #275 on:** Mon, 13 March 2017, 05:50:32 »

Okay just did some checking on the pcb!

Everyone be aware the PCB - at least mine - came in bootloader mode and had to be flashed with the ps2avrGB firmware first!
Then you have to perform ALL MAPPINGS and configure the RBG leds.

I mean this case totally doesn't support any underlight at all but I still wanted them to all work. Three RGB LEDs had a a faulty soldering point that was simply fixed by using a soldering iron and heating all four soldering joints for a second.

So now the PCB looks ready to go!

eddible · « **Reply #276 on:** Mon, 13 March 2017, 05:51:19 »

Quote from: Petch on Mon, 13 March 2017, 05:50:00

Quote from: eddible on Mon, 13 March 2017, 05:49:16
Quote from: Petch on Mon, 13 March 2017, 05:47:07
Is that backspace even capable of being split into 2 1U keys? It looks way too thin on the bottom border

You'd probably just want to make sure you used 5 pin switches to give them the extra stability.
Already bought all my switches (zeal)

Zealios are already 5 pin so that's alright.

Thumper_ · « **Reply #277 on:** Mon, 13 March 2017, 05:51:42 »

Quote from: wodan on Mon, 13 March 2017, 05:50:32

Okay just did some checking on the pcb!

Everyone be aware the PCB - at least mine - came in bootloader mode and had to be flashed with the ps2avrGB firmware first!
Then you have to perform ALL MAPPINGS and configure the RBG leds.

I mean this case totally doesn't support any underlight at all but I still wanted them to all work. Three RGB LEDs had a a faulty soldering point that was simply fixed by using a soldering iron and heating all four soldering joints for a second.

So now the PCB looks ready to go!

Thanks for the info.

Petch · « **Reply #278 on:** Mon, 13 March 2017, 06:01:27 »

Quote from: eddible on Mon, 13 March 2017, 05:51:19

Quote from: Petch on Mon, 13 March 2017, 05:50:00
Quote from: eddible on Mon, 13 March 2017, 05:49:16
Quote from: Petch on Mon, 13 March 2017, 05:47:07
Is that backspace even capable of being split into 2 1U keys? It looks way too thin on the bottom border

You'd probably just want to make sure you used 5 pin switches to give them the extra stability.
Already bought all my switches (zeal)
Zealios are already 5 pin so that's alright.

Ah okay, I'm at work so I didn't have them to hand to check...

Is there any reason that part is so thin? Wasn't like that in the original pics or on the ANSI plate

Thumper_ · « **Reply #279 on:** Mon, 13 March 2017, 06:23:22 »

Quote from: bdtbinh on Mon, 13 March 2017, 05:46:07

The removable plate sample was good, but the final product is not... So i asked them to reproduce and change to non-removable. It was their 1st time doing this stuff so the removable kinda too hard for them. If you are not happy with that, just leave me a msg and i will find a way to sort thing out

Im fine with it. I'll use Holtite sockets.

Saiph · « **Reply #280 on:** Mon, 13 March 2017, 09:15:13 »

Has production for the acrylic cases started?

Will_26 · « **Reply #281 on:** Mon, 13 March 2017, 09:15:34 »

Quote from: wodan on Mon, 13 March 2017, 05:13:24

Quote from: wodan on Mon, 13 March 2017, 05:10:23
Just got my tracking number, scheduled for local delivery tomorrow

LOL I just received it.

Lol wait what where are you based and when was it shipped? Why was it so quick. Looks awesome btw!

eddible · « **Reply #282 on:** Mon, 13 March 2017, 09:23:24 »

Quote from: Will_26 on Mon, 13 March 2017, 09:15:34

Quote from: wodan on Mon, 13 March 2017, 05:13:24
Quote from: wodan on Mon, 13 March 2017, 05:10:23
Just got my tracking number, scheduled for local delivery tomorrow

LOL I just received it.

Lol wait what where are you based and when was it shipped? Why was it so quick. Looks awesome btw!

He must have shipped a few over the weekend/very end of last week. The express shipping is super quick! If ours ship before Wednesday we should have them this week. Wodan is in Germany I believe.

Thumper_ · « **Reply #283 on:** Mon, 13 March 2017, 09:36:52 »

Quote from: eddible on Mon, 13 March 2017, 09:23:24

Quote from: Will_26 on Mon, 13 March 2017, 09:15:34
Quote from: wodan on Mon, 13 March 2017, 05:13:24
Quote from: wodan on Mon, 13 March 2017, 05:10:23
Just got my tracking number, scheduled for local delivery tomorrow

LOL I just received it.

Lol wait what where are you based and when was it shipped? Why was it so quick. Looks awesome btw!
He must have shipped a few over the weekend/very end of last week. The express shipping is super quick! If ours ship before Wednesday we should have them this week. Wodan is in Germany I believe.

Yes he lives in Germany, as well as I but I got no tracking number so far.

wodan · « **Reply #284 on:** Mon, 13 March 2017, 13:50:30 »

I received it literally 1h after getting the tracking code by email

Unforgivable · « **Reply #285 on:** Mon, 13 March 2017, 21:51:29 »

Quote from: wodan on Mon, 13 March 2017, 05:26:14

For some reason I got purple. Maybe I ordered that? 2016 was a wreck of a year ...
Show Image

Looks nice with the carbon plate though:
Show Image

Packing was solid, weight came screwed in and all party were packed in a way they couldn't hit each other. I did not find any anodizing defects or dents:
Show Image

Can you only use 5 screws for the Carbon plate? Seems like the 6th hole was overlooked.

eddible · « **Reply #286 on:** Tue, 14 March 2017, 15:15:30 »

Did any get sent today/any received/any tracking numbers?

Thumper_ · « **Reply #287 on:** Tue, 14 March 2017, 15:17:44 »

Not yet, but he said he'll ship them mostly 80% this week, as he has time off. Today was Tuesday, so some more days to go.

thatsmrdoctortoyou · « **Reply #288 on:** Tue, 14 March 2017, 17:12:54 »

No tracking here either. Hopefully soon

hervuli · « **Reply #289 on:** Tue, 14 March 2017, 22:48:13 »

Got my black one today (eastern USA). Haven't had a chance to inspect closely but at first glance it looks great! Solid packaging and 50 (!) bumpons included for some reason.

eddible · « **Reply #290 on:** Wed, 15 March 2017, 06:39:05 »

Quote from: hervuli on Tue, 14 March 2017, 22:48:13

50 (!) bumpons included for some reason.

Haha! You struck the bumpon jackpot!

skimzor · « **Reply #291 on:** Thu, 16 March 2017, 10:03:18 »

Anyone on the west coast get theirs yet? Or a tracking number?

Unforgivable · « **Reply #292 on:** Thu, 16 March 2017, 10:13:29 »

Nothing here yet either.

Will_26 · « **Reply #293 on:** Thu, 16 March 2017, 10:35:48 »

bdtbinh please could we have a status update?

How's the shipping going?
How many have been shipped?
You said you would ship 80% of orders this week, what happens to the other 20% if you're starting a new job next week?

Any communication would be good, I'm sure everyone here would appreciate it. Thanks

thatsmrdoctortoyou · « **Reply #294 on:** Thu, 16 March 2017, 10:54:24 »

Quote from: skimzor on Thu, 16 March 2017, 10:03:18

Anyone on the west coast get theirs yet? Or a tracking number?

Negative, no tracking info yet.

jackie321304 · « **Reply #295 on:** Fri, 17 March 2017, 07:37:01 »

Me either... Feel its time to file the paypal refund... 3 months delay and no update on tracking...

bdtbinh · « **Reply #296 on:** Fri, 17 March 2017, 07:39:36 »

Quote from: Will_26 on Thu, 16 March 2017, 10:35:48

bdtbinh please could we have a status update?

How's the shipping going?
How many have been shipped?
You said you would ship 80% of orders this week, what happens to the other 20% if you're starting a new job next week?

Any communication would be good, I'm sure everyone here would appreciate it. Thanks

I delayed my new job 1 more week so dont worry about it

50% have been shipped until now, tomorrow i will continue to update the tracking to you.
I will check gh and update every 2 days, feel free to ask everything

eddible · « **Reply #297 on:** Fri, 17 March 2017, 07:40:32 »

Has mine shipped yet?

bdtbinh · « **Reply #298 on:** Fri, 17 March 2017, 07:41:26 »

Quote from: Saiph on Mon, 13 March 2017, 09:15:13

Has production for the acrylic cases started?

Not yet until i finish the alum order. But dont worry too much, the acrylic version is much simpler to produce so it will be 1-1.5 week only

bdtbinh · « **Reply #299 on:** Fri, 17 March 2017, 07:49:49 »

Quote from: eddible on Fri, 17 March 2017, 07:40:32

Has mine shipped yet?

I have shipped out all the carbon order except Will_26 cause he need the switch. Now i'm continue with the alum plate order.
Please be patient

News:

Author Topic: [GB] 75% Aluminum Case (Shipping) (Read 129195 times)