Author Topic: TX-series keyboards (Read 351585 times)

FoC_Tow · « **Reply #800 on:** Mon, 06 March 2017, 07:14:05 »

Quote from: kin25 on Thu, 02 March 2017, 03:01:36

Quote from: eyedrop on Thu, 02 March 2017, 00:07:21
I am still patiently waiting for my grey TX75...it's been a long time. My patience is testing me.

Any update on that, kin?
Sorry.. :-(
I am also waiting them.
Everyday I called factory and asked how they were going on..
Now.. They are in anodizing factory.
But it is not the signal of finishing.
In anodizing process All problems happen.
So.. We need more patience.

If you don't want to buy it, plz let me know..
I will refund all money.
I don't like debt.

Im confused, are there new TX75s being made?

I thought this was only Stock boards...
Any new black boards available kin? xD

aznreaper · « **Reply #801 on:** Mon, 06 March 2017, 08:28:53 »

There was an initial interest check for the boards while they were getting made, but kin has switched to only selling stock due to the way his tx1800 GB went. I believe he sold out his stock so he started another run of boards. Just message him on telegram if you want one.

ctrlX · « **Reply #802 on:** Tue, 07 March 2017, 06:48:08 »

Those that have assembled their TX-Pad and TX-87... There are a couple of small 4mm M3 screws included. I thought they were supposed to screw down the switch plate to the bottom housing. I however have huge problems with this. It is as the screw holes in the bottom housing are too small for the included screws. I have applied some force but no no avail. I could try to push them down even harder but not ready to do so in fear of slipping and scratching. I aslo think that if more force is applied, the threads will be screwed up.

How did you guys secure your switch plate?

Edit:
Also why is there 16mm and 15mm M3 screws? Which one am I supposed to use? I just tried with the 15mm and they seem to work. Screwed my TX-Pad together using those without securing the switch plate with the 4mm ones. Seems to work, but still wondering what all the different screws are for?

kin25 · « **Reply #803 on:** Tue, 07 March 2017, 06:54:02 »

Quote from: ctrlX on Tue, 07 March 2017, 06:48:08

Those that have assembled their TX-Pad and TX-87... There are a couple of small 4mm M3 screws included. I thought they were supposed to screw down the switch plate to the bottom housing. I however have huge problems with this. It is as the screw holes in the bottom housing are too small for the included screws. I have applied some force but no no avail. I could try to push them down even harder but not ready to do so in fear of slipping and scratching. I aslo think that if more force is applied, the threads will be screwed up.

How did you guys secure your switch plate?

Don't use M2.5 bolts.
They are useless.

ctrlX · « **Reply #804 on:** Tue, 07 March 2017, 07:04:49 »

Quote from: kin25 on Tue, 07 March 2017, 06:54:02

Quote from: ctrlX on Tue, 07 March 2017, 06:48:08
Those that have assembled their TX-Pad and TX-87... There are a couple of small 4mm M3 screws included. I thought they were supposed to screw down the switch plate to the bottom housing. I however have huge problems with this. It is as the screw holes in the bottom housing are too small for the included screws. I have applied some force but no no avail. I could try to push them down even harder but not ready to do so in fear of slipping and scratching. I aslo think that if more force is applied, the threads will be screwed up.

How did you guys secure your switch plate?

Don't use M2.5 bolts.
They are useless.

Ah, cheers Kin. Since you are online... Just edited my previous post with another question. Mind answering that one too?

kin25 · « **Reply #805 on:** Tue, 07 March 2017, 20:47:52 »

Quote from: ctrlX on Tue, 07 March 2017, 07:04:49

Quote from: kin25 on Tue, 07 March 2017, 06:54:02
Quote from: ctrlX on Tue, 07 March 2017, 06:48:08
Those that have assembled their TX-Pad and TX-87... There are a couple of small 4mm M3 screws included. I thought they were supposed to screw down the switch plate to the bottom housing. I however have huge problems with this. It is as the screw holes in the bottom housing are too small for the included screws. I have applied some force but no no avail. I could try to push them down even harder but not ready to do so in fear of slipping and scratching. I aslo think that if more force is applied, the threads will be screwed up.

How did you guys secure your switch plate?

Don't use M2.5 bolts.
They are useless.

Ah, cheers Kin. Since you are online... Just edited my previous post with another question. Mind answering that one too?

You can use 15mm and 16mm both.
15mm is hexagon bolts
16mm is + bolts.

eyedrop · « **Reply #806 on:** Thu, 09 March 2017, 22:51:21 »

Quote from: kin25 on Thu, 02 March 2017, 03:01:36

Quote from: eyedrop on Thu, 02 March 2017, 00:07:21
I am still patiently waiting for my grey TX75...it's been a long time. My patience is testing me.

Any update on that, kin?
Sorry.. :-(
I am also waiting them.
Everyday I called factory and asked how they were going on..
Now.. They are in anodizing factory.
But it is not the signal of finishing.
In anodizing process All problems happen.
So.. We need more patience.

If you don't want to buy it, plz let me know..
I will refund all money.
I don't like debt.

kin, I would like to cancel and get a refund then. I'll wait for your other boards later. Let me know what I need to do to process the refund.

r5d · « **Reply #807 on:** Fri, 10 March 2017, 05:03:55 »

Quote from: eyedrop on Thu, 09 March 2017, 22:51:21

kin, I would like to cancel and get a refund then. I'll wait for your other boards later. Let me know what I need to do to process the refund.

Good luck with that, I also requested a refund via Telegram on 02/28 and asked about it in this thread on 03/06 and I haven't heard a peep. I will open a dispute in another week or so if nothing happens.

Recieved refund, thank you!

kin25 · « **Reply #808 on:** Fri, 10 March 2017, 07:42:09 »

Quote from: r5d on Fri, 10 March 2017, 05:03:55

Quote from: eyedrop on Thu, 09 March 2017, 22:51:21
kin, I would like to cancel and get a refund then. I'll wait for your other boards later. Let me know what I need to do to process the refund.

Good luck with that, I also requested a refund via Telegram on 02/28 and asked about it in this thread on 03/06 and I haven't heard a peep. I will open a dispute in another week or so if nothing happens.

I said to yuktsi.
He will refund..

yuktsi · « **Reply #809 on:** Fri, 10 March 2017, 10:16:05 »

Quote from: r5d on Fri, 10 March 2017, 05:03:55

Quote from: eyedrop on Thu, 09 March 2017, 22:51:21
kin, I would like to cancel and get a refund then. I'll wait for your other boards later. Let me know what I need to do to process the refund.

Good luck with that, I also requested a refund via Telegram on 02/28 and asked about it in this thread on 03/06 and I haven't heard a peep. I will open a dispute in another week or so if nothing happens.

Hey bro, sorry for the delay. There were problems with PayPal. Anyway, I've just refunded you. Have a nice weekend ahead

r5d · « **Reply #810 on:** Fri, 10 March 2017, 12:04:22 »

Quote from: yuktsi on Fri, 10 March 2017, 10:16:05

Hey bro, sorry for the delay. There were problems with PayPal. Anyway, I've just refunded you. Have a nice weekend ahead

Thank you. I didn't want to sound mean, but I was wondering about the status. The TX-75 still looks great but since it is taking so long, it's not a GB and there is so much keyboard stuff out there right now I decided to skip it after all. Have a great wekend as well!

Mr_BeastQuake · « **Reply #811 on:** Fri, 10 March 2017, 12:19:31 »

I've had my TX-75 for awhile now and I love this damn thing. I swapped back to my Black Bird and there is a noticeable drop in quality (IMO). I'm really excited for those 1800 boards to be available.

http://imgur.com/a/TBvLt

yuktsi · « **Reply #812 on:** Fri, 10 March 2017, 14:24:40 »

Quote from: r5d on Fri, 10 March 2017, 12:04:22

Quote from: yuktsi on Fri, 10 March 2017, 10:16:05
Hey bro, sorry for the delay. There were problems with PayPal. Anyway, I've just refunded you. Have a nice weekend ahead

Thank you. I didn't want to sound mean, but I was wondering about the status. The TX-75 still looks great but since it is taking so long, it's not a GB and there is so much keyboard stuff out there right now I decided to skip it after all. Have a great wekend as well!

I am surprised that I've been using the TX75 for awhile now. I didn't like 75%.
Had both Octagon v1 and v2. Sold a week or two after they were built.

P1kas · « **Reply #813 on:** Sat, 11 March 2017, 08:40:43 »

Any weight measurements? I'd like to know approximately how many KG this board weighs w/ brass weight & plate.

kin25 · « **Reply #814 on:** Sat, 11 March 2017, 21:10:30 »

Quote from: P1kas on Sat, 11 March 2017, 08:40:43

Any weight measurements? I'd like to know approximately how many KG this board weighs w/ brass weight & plate.

In the first page..
The weight of tx75 with brass is 27.3kg

kin25 · « **Reply #815 on:** Sat, 11 March 2017, 21:17:19 »

I ordered factory to make serveral tx75 more.
Factory made them slowly.

Finally factory finished producing.
I am waiting them.

Factory will start producing Txcp and tx1800 v2.
It will take more than 2 months.

P1kas · « **Reply #816 on:** Sat, 11 March 2017, 22:05:47 »

Quote from: kin25 on Sat, 11 March 2017, 21:10:30

In the first page..
The weight of tx75 with brass is 27.3kg

Yeah, I saw it earlier today. Pretty dumb of me

Jedi · « **Reply #817 on:** Sun, 12 March 2017, 17:55:31 »

Quote from: kin25 on Sat, 11 March 2017, 21:10:30

The weight of tx75 with brass is 27.3kg

Kin25 meant to say the TX75 weighs 2.73 kg with the brass weight, of course if you buy 10...

Kin25, do please note me in for a TX1800. Will you setup a google form soon for us to fill in a interest request for the boards and so we can provide you our information?

kin25 · « **Reply #818 on:** Sun, 12 March 2017, 23:17:23 »

Quote from: cswanic on Sun, 12 March 2017, 17:55:31

Quote from: kin25 on Sat, 11 March 2017, 21:10:30
The weight of tx75 with brass is 27.3kg

Kin25 meant to say the TX75 weighs 2.73 kg with the brass weight, of course if you buy 10...

Kin25, do please note me in for a TX1800. Will you setup a google form soon for us to fill in a interest request for the boards and so we can provide you our information?

Tx1800 v2 and TX.cp R2
I will start IC at first for checking colors.
And..
I will take preorders for assembling service.

Mr_BeastQuake · « **Reply #819 on:** Sun, 12 March 2017, 23:19:51 »

Quote from: kin25 on Sat, 11 March 2017, 21:17:19

I ordered factory to make serveral tx75 more.
Factory made them slowly.

Finally factory finished producing.
I am waiting them.

Factory will start producing Txcp and tx1800 v2.
It will take more than 2 months.

Sadness, I had March earmarked. Things happen I suppose though, I'm excited nonetheless. Out of curiosity, is there still TX87/84 stock?

Petch · « **Reply #820 on:** Mon, 13 March 2017, 06:04:33 »

Any left in stock?

kin25 · « **Reply #821 on:** Mon, 13 March 2017, 09:52:30 »

Quote from: Petch on Mon, 13 March 2017, 06:04:33

Any left in stock?

There are many tx87 and txpad.
Some are b.stock which have some scratches (not serious)

Petch · « **Reply #822 on:** Mon, 13 March 2017, 10:03:29 »

Quote from: kin25 on Mon, 13 March 2017, 09:52:30

Quote from: Petch on Mon, 13 March 2017, 06:04:33
Any left in stock?

There are many tx87 and txpad.
Some are b.stock which have some scratches (not serious)

No 75 then?

I'll wait for 1800

lunr · « **Reply #823 on:** Tue, 14 March 2017, 10:50:03 »

Quote from: Petch on Mon, 13 March 2017, 10:03:29

Quote from: kin25 on Mon, 13 March 2017, 09:52:30
Quote from: Petch on Mon, 13 March 2017, 06:04:33
Any left in stock?

There are many tx87 and txpad.
Some are b.stock which have some scratches (not serious)

No 75 then? I'll wait for 1800

Kin said he geting more made I think? According the Kin's posts above. I messaged him on Telegram and he told me to get back to him after a week.

SICAR187 · « **Reply #824 on:** Thu, 16 March 2017, 00:17:21 »

Quote from: kin25 on Mon, 13 March 2017, 09:52:30

Quote from: Petch on Mon, 13 March 2017, 06:04:33
Any left in stock?

There are many tx87 and txpad.
Some are b.stock which have some scratches (not serious)

Sent PM & Telegram on the TX87, looking forward to your reply!

Trente · « **Reply #825 on:** Mon, 20 March 2017, 13:10:25 »

Hey kin, I am just wondering if there is any Tx75 still in stock, even is b.stock. If not, would there be any in the upcoming list?

SICAR187 · « **Reply #826 on:** Mon, 20 March 2017, 13:20:25 »

Quote from: Trente on Mon, 20 March 2017, 13:10:25

Hey kin, I am just wondering if there is any Tx75 still in stock, even is b.stock. If not, would there be any in the upcoming list?

He had 2 or 3 left when I spoke to him a few days ago. Hit him up on the Telegram App @Kin25, he'll usually answer quickly there. GL!

Sent from my SM-G935V using Tapatalk

lunr · « **Reply #827 on:** Mon, 20 March 2017, 13:30:10 »

Quote from: SICAR187 on Mon, 20 March 2017, 13:20:25

Quote from: Trente on Mon, 20 March 2017, 13:10:25
Hey kin, I am just wondering if there is any Tx75 still in stock, even is b.stock. If not, would there be any in the upcoming list?
He had 2 or 3 left when I spoke to him a few days ago. Hit him up on the Telegram App @Kin25, he'll usually answer quickly there. GL!

Sent from my SM-G935V using Tapatalk

Stock in hand? He told me something different that he was getting extras in from a pre-order either monday or tuesday.

SICAR187 · « **Reply #828 on:** Tue, 21 March 2017, 06:56:52 »

Quote from: lunr on Mon, 20 March 2017, 13:30:10

Quote from: SICAR187 on Mon, 20 March 2017, 13:20:25
Quote from: Trente on Mon, 20 March 2017, 13:10:25
Hey kin, I am just wondering if there is any Tx75 still in stock, even is b.stock. If not, would there be any in the upcoming list?
He had 2 or 3 left when I spoke to him a few days ago. Hit him up on the Telegram App @Kin25, he'll usually answer quickly there. GL!

Sent from my SM-G935V using Tapatalk

Stock in hand? He told me something different that he was getting extras in from a pre-order either monday or tuesday.

I misspoke, just looked at the messages. It's the TX-CP, not the TX-75, he mentioned. My apologies.

Sent from my SM-G935V using Tapatalk

Dreamre · « **Reply #829 on:** Sun, 26 March 2017, 11:55:32 »

Looking to buy someone's gray TX75...doesn't matter if it's built or unbuilt...you can even keep the PCB. The case needs to be immaculate. Thanks!

ticktwo · « **Reply #830 on:** Mon, 27 March 2017, 01:19:49 »

has tx75 silver case already assembled , this for sale if you interested please pm me.

Sent from my SM-G935F using Tapatalk

lunr · « **Reply #831 on:** Wed, 29 March 2017, 15:35:41 »

I have to say buying from Kin has been a pleasure. He takes photos of every step even when packing for shipping. Definitely will buy more boards from him. Might grab a TX87 when I have the funds.

Petch · « **Reply #832 on:** Thu, 30 March 2017, 10:58:49 »

Looking to buy one off Kin, a few questions

Is the PCB programmable? If so how
ISO fully supported? (ISO enter, split left shift) as well as split backspace?

I'm not sure what layout I want to go with for this one, so I want to keep my options open

Saiph · « **Reply #833 on:** Thu, 30 March 2017, 14:00:45 »

Quote from: Petch on Thu, 30 March 2017, 10:58:49

Looking to buy one off Kin, a few questions

Is the PCB programmable? If so how
ISO fully supported? (ISO enter, split left shift) as well as split backspace?

I'm not sure what layout I want to go with for this one, so I want to keep my options open

It is fully reprogrammable but the program's name is slipping my name right now, I can find the download link when I get home.
Edit: Nvm, found it https://www.dropbox.com/sh/v24vygvyl4mvqrm/AABUNcm0BDioYE5QbArje0Kba?dl=0&preview=Leeku+L3+Software.pdf

menuhin · « **Reply #834 on:** Thu, 30 March 2017, 16:39:36 »

Quote from: Saiph on Thu, 30 March 2017, 14:00:45

Quote from: Petch on Thu, 30 March 2017, 10:58:49
Looking to buy one off Kin, a few questions

Is the PCB programmable? If so how
ISO fully supported? (ISO enter, split left shift) as well as split backspace?

I'm not sure what layout I want to go with for this one, so I want to keep my options open
It is fully reprogrammable but the program's name is slipping my name right now, I can find the download link when I get home.
Edit: Nvm, found it https://www.dropbox.com/sh/v24vygvyl4mvqrm/AABUNcm0BDioYE5QbArje0Kba?dl=0&preview=Leeku+L3+Software.pdf

Does it support features such as tap vs hold? e.g. In QMK

Quote

...
MT(mod, kc) - is mod (modifier key - MOD_LCTL, MOD_LSFT) when held, and kc when tapped. In other words, you can have a key that sends Esc (or the letter O or whatever) when you tap it, but works as a Control key or a Shift key when you hold it down.
...

Or can the PCB be converted to run QMK?

ashwinv11 · « **Reply #835 on:** Tue, 04 April 2017, 17:40:40 »

Sorry if this has been asked already, but is there a way to change the color of the PCBs backlight? Mine is still on the default color lol. Thanks!

Tally810 · « **Reply #836 on:** Sun, 09 April 2017, 17:35:20 »

Quote from: ashwinv11 on Tue, 04 April 2017, 17:40:40

Sorry if this has been asked already, but is there a way to change the color of the PCBs backlight? Mine is still on the default color lol. Thanks!

In the jigon software I believe. That's how I changed mine. Here ya go. https://geekhack.org/index.php?topic=83950.0

I've also used several boards since my tx-75 came in and I always go back to it as the rest collect dust.

Sent from my SM-G928V using Tapatalk

lecorsair · « **Reply #837 on:** Mon, 10 April 2017, 14:51:38 »

Quote from: Tally810 on Sun, 09 April 2017, 17:35:20

Quote from: ashwinv11 on Tue, 04 April 2017, 17:40:40
Sorry if this has been asked already, but is there a way to change the color of the PCBs backlight? Mine is still on the default color lol. Thanks!
In the jigon software I believe. That's how I changed mine. Here ya go. https://geekhack.org/index.php?topic=83950.0

I've also used several boards since my tx-75 came in and I always go back to it as the rest collect dust.

Sent from my SM-G928V using Tapatalk

I have to agree. Liking it more and more as I'm putting more time on it. Possibly the heft + brass plate gives a very satisfying "thock" with every stroke. Plus being able to customize it for my Mac is a huge bonus.

kin25 · « **Reply #838 on:** Tue, 11 April 2017, 11:32:45 »

TX1800v2 Proto

Today new 1800 PCB arrived.

smittysteve · « **Reply #839 on:** Tue, 11 April 2017, 11:35:27 »

Quote from: kin25 on Tue, 11 April 2017, 11:32:45

TX1800v2 Proto

Today new 1800 PCB arrived.

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

Holy smokes, Kin... that looks GORGEOUS!!! Great new lines, I like it a lot!!

Tally810 · « **Reply #840 on:** Tue, 11 April 2017, 11:37:09 »

Quote from: kin25 on Tue, 11 April 2017, 11:32:45

TX1800v2 Proto

Today new 1800 PCB arrived.

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

Oh man that's looking real nice!

Sent from my SM-G928V using Tapatalk

romevi · « **Reply #841 on:** Tue, 11 April 2017, 11:40:41 »

Quote from: kin25 on Tue, 11 April 2017, 11:32:45

TX1800v2 Proto

Today new 1800 PCB arrived.

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

Slash Emperor · « **Reply #842 on:** Tue, 11 April 2017, 12:22:21 »

Quote from: kin25 on Tue, 11 April 2017, 11:32:45

TX1800v2 Proto

Today new 1800 PCB arrived.

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

(Attachment Link)

Wow, those lights are putting in work. I hadn't considered gray before, but it looks so damn nice with this.

finalarcadia · « **Reply #843 on:** Tue, 11 April 2017, 18:07:00 »

Loving the new chamfered top edge. Can't wait to order one.

Tally810 · « **Reply #844 on:** Tue, 11 April 2017, 18:08:32 »

Has he said a price yet?

Sent from my SM-G928V using Tapatalk

smittysteve · « **Reply #845 on:** Tue, 11 April 2017, 18:12:56 »

Quote from: Tally810 on Tue, 11 April 2017, 18:08:32

Has he said a price yet?

Sent from my SM-G928V using Tapatalk

Negative Ghost Rider... Shouldn't be long to offer them up though since proto is looking good.

Wonder if he's doing a mfg run and then will sell or he'll do it as a standard-operation GB??

Mr_BeastQuake · « **Reply #846 on:** Tue, 11 April 2017, 18:47:55 »

Quote from: smittysteve on Tue, 11 April 2017, 18:12:56

Quote from: Tally810 on Tue, 11 April 2017, 18:08:32
Has he said a price yet?

Sent from my SM-G928V using Tapatalk

Negative Ghost Rider... Shouldn't be long to offer them up though since proto is looking good. Wonder if he's doing a mfg run and then will sell or he'll do it as a standard-operation GB??

Should just be a normal sale. In speaking with him awhile ago, PCB's and plates are just about wrapped up and boards will probably be available some time around end of April - mid May. Specific time varying due to me not remember exactly what he said.

kin25 · « **Reply #847 on:** Wed, 12 April 2017, 05:42:43 »

Quote from: finalarcadia on Tue, 11 April 2017, 18:07:00

Loving the new chamfered top edge. Can't wait to order one.

This is proto..
Chamfer will be changed to rounding.

kin25 · « **Reply #848 on:** Wed, 12 April 2017, 05:47:58 »

Quote from: Mr_BeastQuake on Tue, 11 April 2017, 18:47:55

Quote from: smittysteve on Tue, 11 April 2017, 18:12:56
Quote from: Tally810 on Tue, 11 April 2017, 18:08:32
Has he said a price yet?

Sent from my SM-G928V using Tapatalk

Negative Ghost Rider... Shouldn't be long to offer them up though since proto is looking good. Wonder if he's doing a mfg run and then will sell or he'll do it as a standard-operation GB??

Should just be a normal sale. In speaking with him awhile ago, PCB's and plates are just about wrapped up and boards will probably be available some time around end of April - mid May. Specific time varying due to me not remember exactly what he said.

Next week..at first Plate s will arrive..
I will take preorders of assembling service.

Tx1800v2 with brass is $420.
Color : black, silver, grey, red, blue.

Assembling service (included all parts) is $130.
(Parts are vintage switches, films, springs, leds, stabilizers, lub and soldering)

Shipping day is 15 May.

ricyuyc · « **Reply #849 on:** Wed, 12 April 2017, 06:55:45 »

Quote from: kin25 on Wed, 12 April 2017, 05:42:43

Quote from: finalarcadia on Tue, 11 April 2017, 18:07:00
Loving the new chamfered top edge. Can't wait to order one.
This is proto..
Chamfer will be changed to rounding.

I do love that edges.


~~IBM M13 black~~	NeXT non-ADB keyboard (AAE)	HHKB Pro 2 HasuBT

News:

Author Topic: TX-series keyboards (Read 351585 times)