Author Topic: [GB] MIRA SE - Custom 80% Keyboard (CLOSED) (Read 753134 times)

Puddsy · « **Reply #1300 on:** Wed, 03 January 2018, 20:44:39 »

Quote from: boo on Wed, 03 January 2018, 20:41:35

Got my blue board today. YEE

Should we put on bumpons for the board to not scratch from the table?

pics pls

and yes, bumpons are a good idea

diqkiq · « **Reply #1301 on:** Wed, 03 January 2018, 21:38:37 »

Quote from: mechengkeys on Wed, 03 January 2018, 16:46:42

Is anyone else still waiting on delivery information, it has been like two days!?

I'm waiting on my board

Sent from my Pixel 2 XL using Tapatalk

Unforgivable · « **Reply #1302 on:** Wed, 03 January 2018, 22:02:54 »

I’m still waiting for my shipping invoice, the wait is killing me, haha.

I’m so excited though.

Did anyone get bumpon feet or will we have to source them?

Photoelectric · « **Reply #1303 on:** Wed, 03 January 2018, 22:20:54 »

I don't think the board comes with bumpon feet, but it's a good idea. I have a sheet with some small round transparent 3M bumpon feet I got from mouser ages ago--I'll probably use those when I get my kit, although maybe not (have a large mousepad across much of my desk).
edit: some eBay options:
https://www.ebay.com/sch/i.html?_odkw=3m+bumpon+feet&LH_PrefLoc=3&_sop=15&_osacat=0&_from=R40&_trksid=m570.l1313&_nkw=3m+bumpon+feet+clear&_sacat=0

Unforgivable · « **Reply #1304 on:** Wed, 03 January 2018, 22:31:12 »

Quote from: Photoelectric on Wed, 03 January 2018, 22:20:54

I don't think the board comes with bumpon feet, but it's a good idea. I have a sheet with some small round transparent 3M bumpon feet I got from mouser ages ago--I'll probably use those when I get my kit, although maybe not (have a large mousepad across much of my desk).
edit: some eBay options:
https://www.ebay.com/sch/i.html?_odkw=3m+bumpon+feet&LH_PrefLoc=3&_sop=15&_osacat=0&_from=R40&_trksid=m570.l1313&_nkw=3m+bumpon+feet+clear&_sacat=0

Thanks, Photo! Buying some now, just to prepare.

Puddsy · « **Reply #1305 on:** Wed, 03 January 2018, 22:31:23 »

amazon has sheets of 3M bumpons (do yourself a favor and shell out the extra dollar) for pretty cheap

worth buying

Unforgivable · « **Reply #1306 on:** Wed, 03 January 2018, 22:35:55 »

Quote from: Puddsy on Wed, 03 January 2018, 22:31:23

amazon has sheets of 3M bumpons (do yourself a favor and shell out the extra dollar) for pretty cheap

worth buying

True! Thank you both!

bciamny · « **Reply #1307 on:** Wed, 03 January 2018, 23:11:37 »

i use a super large mousepad for my current board and i love it since the keyboard can just sit on it. it allows for relatively low friction movement too in case im sitting at a different angle/using my keyboard in a weird spot.

i feel like the bumpons would take away from the dimensions of the board, which i absolutely adore.

Puddsy · « **Reply #1308 on:** Wed, 03 January 2018, 23:42:36 »

in case anyone was curious, huey's built MIRA is 2.949kg, or 6.8lbs

this makes it one of the top 5 heaviest TKLs

diqkiq · « **Reply #1309 on:** Wed, 03 January 2018, 23:48:35 »

Quote from: Puddsy on Wed, 03 January 2018, 23:42:36

in case anyone was curious, huey's built MIRA is 2.949kg, or 6.8lbs

this makes it one of the top 5 heaviest TKLs

Brass or SS weight?

Sent from my Pixel 2 XL using Tapatalk

SpareWalrus · « **Reply #1310 on:** Wed, 03 January 2018, 23:49:22 »

Quote from: diqkiq on Wed, 03 January 2018, 23:48:35

Quote from: Puddsy on Wed, 03 January 2018, 23:42:36
in case anyone was curious, huey's built MIRA is 2.949kg, or 6.8lbs

this makes it one of the top 5 heaviest TKLs
Brass or SS weight?

Sent from my Pixel 2 XL using Tapatalk

Brass

swimmingbird · « **Reply #1311 on:** Thu, 04 January 2018, 00:08:12 »

Just got mine in today - looks amazing

When can we expect the Gold Zeal stabs?

adamski07 · « **Reply #1312 on:** Thu, 04 January 2018, 00:10:32 »

Quote from: swimmingbird on Thu, 04 January 2018, 00:08:12

Just got mine in today - looks amazing

When can we expect the Gold Zeal stabs?

Its inside the pink heart shaped bubblewrap.

----------

Looks like I received the wrong stabs too. I believe I asked for a 6.25u and not 7. Also I got board no. 15 and this one says 23.

Sent from my SM-G955U using Tapatalk

Zeal · « **Reply #1313 on:** Thu, 04 January 2018, 00:18:48 »

We're aware of the issue. I numbered the stabilizers with the stabilizer wire size and a matching number to the Mira...There seems to have been a packing mistake and random bags were packed into the numbered Mira cases. We're waiting for everyone to get their boards and see how many have the wrong wire size before coming to a resolution.

swimmingbird · « **Reply #1314 on:** Thu, 04 January 2018, 00:21:53 »

Quote from: adamski07 on Thu, 04 January 2018, 00:10:32

Quote from: swimmingbird on Thu, 04 January 2018, 00:08:12
Just got mine in today - looks amazing

When can we expect the Gold Zeal stabs?
Its inside the pink heart shaped bubblewrap.

----------

Looks like I received the wrong stabs too. I believe I asked for a 6.25u and not 7. Also I got board no. 15 and this one says 23.

Show Image

Sent from my SM-G955U using Tapatalk

Ah just found them

Mine has the wrong number (07 vs 57) but I lucked out and got the 7u I was after

adamski07 · « **Reply #1315 on:** Thu, 04 January 2018, 00:33:19 »

Quote from: Zeal on Thu, 04 January 2018, 00:18:48

We're aware of the issue. I numbered the stabilizers with the stabilizer wire size and a matching number to the Mira...There seems to have been a packing mistake and random bags were packed into the numbered Mira cases. We're waiting for everyone to get their boards and see how many have the wrong wire size before coming to a resolution.

Thank you. I think I have an extra 6.25 from my last build. If @aznairjordan is conus and needs this 7u stab, I can ship it to him tomorrow. Just need shipping info.

Puddsy · « **Reply #1316 on:** Thu, 04 January 2018, 00:34:01 »

Quote from: Zeal on Thu, 04 January 2018, 00:18:48

We're aware of the issue. I numbered the stabilizers with the stabilizer wire size and a matching number to the Mira...There seems to have been a packing mistake and random bags were packed into the numbered Mira cases. We're waiting for everyone to get their boards and see how many have the wrong wire size before coming to a resolution.

thanks zeal

diqkiq · « **Reply #1317 on:** Thu, 04 January 2018, 00:37:12 »

Quote from: SpareWalrus on Wed, 03 January 2018, 23:49:22

Quote from: diqkiq on Wed, 03 January 2018, 23:48:35
Quote from: Puddsy on Wed, 03 January 2018, 23:42:36
in case anyone was curious, huey's built MIRA is 2.949kg, or 6.8lbs

this makes it one of the top 5 heaviest TKLs
Brass or SS weight?

Sent from my Pixel 2 XL using Tapatalk
Brass

Thanks. Your build came out beautiful!

Sent from my Pixel 2 XL using Tapatalk

SpareWalrus · « **Reply #1318 on:** Thu, 04 January 2018, 00:40:07 »

Quote from: diqkiq on Thu, 04 January 2018, 00:37:12

Quote from: SpareWalrus on Wed, 03 January 2018, 23:49:22
Quote from: diqkiq on Wed, 03 January 2018, 23:48:35
Quote from: Puddsy on Wed, 03 January 2018, 23:42:36
in case anyone was curious, huey's built MIRA is 2.949kg, or 6.8lbs

this makes it one of the top 5 heaviest TKLs
Brass or SS weight?

Sent from my Pixel 2 XL using Tapatalk
Brass
Thanks. Your build came out beautiful!

Sent from my Pixel 2 XL using Tapatalk

Thanks man! Hope yours ships soon, you're going to love it.

xosk · « **Reply #1319 on:** Thu, 04 January 2018, 02:04:32 »

Quote from: Puddsy on Wed, 03 January 2018, 19:00:52

Quote from: zzyjayfree on Tue, 02 January 2018, 22:29:34
14 more boards are on their way to my proxy!

Quote from: xosk on Wed, 03 January 2018, 18:38:11
I still haven't gotten a shipping invoice even... Anyone else?

shed some light onto your question

I was curious if anyone else hadn't received their shipping invoice yet, or if I was the only one/forgotten. But it seems like someone else also did not get their shipping invoice yet. So excited for the board!

Rayoui · « **Reply #1320 on:** Thu, 04 January 2018, 03:42:19 »

Quote from: Puddsy on Wed, 03 January 2018, 22:31:23

amazon has sheets of 3M bumpons (do yourself a favor and shell out the extra dollar) for pretty cheap

worth buying

I'm probably going to go for something like this. It's a little bit lower profile than the bumpons.

zzyjayfree · « **Reply #1321 on:** Thu, 04 January 2018, 08:10:12 »

Quote from: xosk on Thu, 04 January 2018, 02:04:32

Quote from: Puddsy on Wed, 03 January 2018, 19:00:52
Quote from: zzyjayfree on Tue, 02 January 2018, 22:29:34
14 more boards are on their way to my proxy!

Quote from: xosk on Wed, 03 January 2018, 18:38:11
I still haven't gotten a shipping invoice even... Anyone else?

shed some light onto your question

I was curious if anyone else hadn't received their shipping invoice yet, or if I was the only one/forgotten. But it seems like someone else also did not get their shipping invoice yet. So excited for the board!

Some of the boards are still to be shipped. And I have another 14 boards on their way to my proxy. I’ll be invoicing as soon as I receive them.

A wild iPhone X has sent you an message!

Chachal · « **Reply #1322 on:** Thu, 04 January 2018, 08:17:24 »

Just received my blue Mira. I love it ^^

What size hex key I need for this screws?

Edit: 2,5mm

Photoelectric · « **Reply #1323 on:** Thu, 04 January 2018, 11:03:48 »

Quote from: swimmingbird on Thu, 04 January 2018, 00:21:53

Mine has the wrong number (07 vs 57) but I lucked out and got the 7u I was after

Quote from: adamski07 on Thu, 04 January 2018, 00:10:32

Looks like I received the wrong stabs too. I believe I asked for a 6.25u and not 7. Also I got board no. 15 and this one says 23.

Please--this is very important--let us know these things in PM right away!

Did you guys mean that your stabilizer baggies say the wrong number on them, but the weights you got are still engraved with the correct number?

Again, if you receive parts not exactly as you ordered, please PM myself, zzyjayfree, and ninjadoc ASAP! I have a list going to keep track of stuff too.

xosk · « **Reply #1324 on:** Thu, 04 January 2018, 11:13:49 »

Quote from: Rayoui on Thu, 04 January 2018, 03:42:19

Quote from: Puddsy on Wed, 03 January 2018, 22:31:23
amazon has sheets of 3M bumpons (do yourself a favor and shell out the extra dollar) for pretty cheap

worth buying

I'm probably going to go for something like this. It's a little bit lower profile than the bumpons.

Show Image

Those are nicer than bumpons! Where do you buy those? Are they on Amazon? Not even sure what they're called ^-^

Will_26 · « **Reply #1325 on:** Thu, 04 January 2018, 11:50:10 »

Quote from: xosk on Thu, 04 January 2018, 11:13:49

Quote from: Rayoui on Thu, 04 January 2018, 03:42:19
Quote from: Puddsy on Wed, 03 January 2018, 22:31:23
amazon has sheets of 3M bumpons (do yourself a favor and shell out the extra dollar) for pretty cheap

worth buying

I'm probably going to go for something like this. It's a little bit lower profile than the bumpons.

Show Image

Those are nicer than bumpons! Where do you buy those? Are they on Amazon? Not even sure what they're called ^-^

Agree! I've already put bumpons on mine but I went looking round the shops for some of those black rectangular ones today but couldn't find anything.

Puddsy · « **Reply #1326 on:** Thu, 04 January 2018, 11:57:08 »

Quote from: Will_26 on Thu, 04 January 2018, 11:50:10

Quote from: xosk on Thu, 04 January 2018, 11:13:49
Quote from: Rayoui on Thu, 04 January 2018, 03:42:19
Quote from: Puddsy on Wed, 03 January 2018, 22:31:23
amazon has sheets of 3M bumpons (do yourself a favor and shell out the extra dollar) for pretty cheap

worth buying

I'm probably going to go for something like this. It's a little bit lower profile than the bumpons.

Show Image

Those are nicer than bumpons! Where do you buy those? Are they on Amazon? Not even sure what they're called ^-^

Agree! I've already put bumpons on mine but I went looking round the shops for some of those black rectangular ones today but couldn't find anything.

i looked for about half an hour yesterday and couldn't find them

3m doesn't make them, so it's kinda annoying to findthem

Photoelectric · « **Reply #1327 on:** Thu, 04 January 2018, 12:05:11 »

It's adhesive backed foam. As to what type, I'm not sure, but if you just search for those terms and something like 2mm thick, you'll find a lot of results on eBay and similar. Probably have to cut to size yourself.

adamski07 · « **Reply #1328 on:** Thu, 04 January 2018, 12:12:01 »

Quote from: Photoelectric on Thu, 04 January 2018, 11:03:48

Quote from: swimmingbird on Thu, 04 January 2018, 00:21:53
Mine has the wrong number (07 vs 57) but I lucked out and got the 7u I was after

Quote from: adamski07 on Thu, 04 January 2018, 00:10:32
Looks like I received the wrong stabs too. I believe I asked for a 6.25u and not 7. Also I got board no. 15 and this one says 23.

Please--this is very important--let us know these things in PM right away!

Did you guys mean that your stabilizer baggies say the wrong number on them, but the weights you got are still engraved with the correct number?

Again, if you receive parts not exactly as you ordered, please PM myself, zzyjayfree, and ninjadoc ASAP! I have a list going to keep track of stuff too.

Correct. I received board no. 15 w/ stabilizers for board no. 23. Thanks.

LightningXI · « **Reply #1329 on:** Thu, 04 January 2018, 12:16:25 »

Quote from: Rayoui on Thu, 04 January 2018, 03:42:19

I'm probably going to go for something like this. It's a little bit lower profile than the bumpons.

Show Image

Just did a reverse image search...

https://www.amazon.com/SoftTouch-Self-Stick-Non-Slip-Surface-Grip/dp/B000SL0KJC

odd · « **Reply #1330 on:** Thu, 04 January 2018, 13:11:57 »

Waiting on tracking number. Cant wait MIRA FTW!!

aznairjordan · « **Reply #1331 on:** Thu, 04 January 2018, 22:30:26 »

Quote from: adamski07 on Thu, 04 January 2018, 00:33:19

Quote from: Zeal on Thu, 04 January 2018, 00:18:48
We're aware of the issue. I numbered the stabilizers with the stabilizer wire size and a matching number to the Mira...There seems to have been a packing mistake and random bags were packed into the numbered Mira cases. We're waiting for everyone to get their boards and see how many have the wrong wire size before coming to a resolution.

Thank you. I think I have an extra 6.25 from my last build. If @aznairjordan is conus and needs this 7u stab, I can ship it to him tomorrow. Just need shipping info.

Thank you sir, I’ll PM you

Eggplant · « **Reply #1332 on:** Thu, 04 January 2018, 22:45:03 »

My shipment arrived today, here are some quick shots:

roostrc0gburn · « **Reply #1333 on:** Thu, 04 January 2018, 23:17:31 »

wew lad. that blue!

Puddsy · « **Reply #1334 on:** Fri, 05 January 2018, 00:13:17 »

Quote from: Eggplant on Thu, 04 January 2018, 22:45:03

My shipment arrived today, here are some quick shots:

(Attachment Link) (Attachment Link)
(Attachment Link) (Attachment Link)

NICE

henz · « **Reply #1335 on:** Fri, 05 January 2018, 01:36:24 »

got mine yesterday too, the board looks marvelous.

Sissy · « **Reply #1336 on:** Fri, 05 January 2018, 03:30:15 »

Quick potato photos in the dying light.
67g Zeliostotles, zeal stabs.
really glad I went with the pink plate I think it ties it all together perfectly.

Makeo · « **Reply #1337 on:** Fri, 05 January 2018, 05:14:07 »

Got a text with my tracking number, the excitement is killing me! I got one question tho, what led's if you are guys using (if you are using any). I found 2 sets off ebay I used for my Wlk B.87 and they seem kinda dim. Just looking for some other recommendations.

theillumedpanda · « **Reply #1338 on:** Fri, 05 January 2018, 11:28:58 »

All colours look stunning! Can‘t wait for mine to arrive.

What carrier do you use for Europe orders? AfterShip didn‘t recognize the format.

ns90 · « **Reply #1339 on:** Fri, 05 January 2018, 11:32:08 »

Quote from: Sissy on Fri, 05 January 2018, 03:30:15

Show Image

Show Image

Show Image

Quick potato photos in the dying light.
67g Zeliostotles, zeal stabs.
really glad I went with the pink plate I think it ties it all together perfectly.

I'm really happy that the blue one looks good with Yuri, because that's exactly what I'm going to do ;D

Oscar2177 · « **Reply #1340 on:** Fri, 05 January 2018, 12:07:33 »

Quote from: theillumedpanda on Fri, 05 January 2018, 11:28:58

All colours look stunning! Can‘t wait for mine to arrive.

What carrier do you use for Europe orders? AfterShip didn‘t recognize the format.

Have you tried DHL?

Photoelectric · « **Reply #1341 on:** Fri, 05 January 2018, 12:09:57 »

Quote from: theillumedpanda on Fri, 05 January 2018, 11:28:58

All colours look stunning! Can‘t wait for mine to arrive.

What carrier do you use for Europe orders? AfterShip didn‘t recognize the format.

https://geekhack.org/index.php?topic=87310.msg2541036#msg2541036

Quote from: zzyjayfree on Fri, 29 December 2017, 12:55:05

Current status: First two batches of 40 boards has arrived my proxy. All shipping invoices sent, 29 of which have been paid and I've informed my proxy. 10 boards are already on their way to buyer. The third batch of 47 boards are sent by EVE today. HYPE!

Check if your boards are shipped here: https://docs.google.com/spreadsheets/d/1TCDZcFQ9xTXeYg5rAniPHBbrZ67OtDi7PlLL6u8hcXI/edit#gid=0

Depending your location, your board maybe shipped by DPEX, DHL or EMS
Start with 5: https://dpex.com/Tools-And-Applications/Track-And-Trace
Start with 3, 6 or 8: http://www.dhl.com/en/express/tracking.html
Start with EV: https://www.ems.post/en/global-network/tracking
For EMS only, once the package enters your country, you can track it from your national post service for more detailed information.

Let me know if you have any questions. Thanks.

Eason

theillumedpanda · « **Reply #1342 on:** Fri, 05 January 2018, 12:14:33 »

Quote from: Oscar2177 on Fri, 05 January 2018, 12:07:33

Quote from: theillumedpanda on Fri, 05 January 2018, 11:28:58
All colours look stunning! Can‘t wait for mine to arrive.

What carrier do you use for Europe orders? AfterShip didn‘t recognize the format.

Have you tried DHL?

Stupid me, I‘ve just checked my messages again and it came from DHL. But yes, DHL seems to be the carrier, thanks.

Quote from: Photoelectric on Fri, 05 January 2018, 12:09:57

Quote from: theillumedpanda on Fri, 05 January 2018, 11:28:58
All colours look stunning! Can‘t wait for mine to arrive.

What carrier do you use for Europe orders? AfterShip didn‘t recognize the format.

https://geekhack.org/index.php?topic=87310.msg2541036#msg2541036

Quote from: zzyjayfree on Fri, 29 December 2017, 12:55:05
Current status: First two batches of 40 boards has arrived my proxy. All shipping invoices sent, 29 of which have been paid and I've informed my proxy. 10 boards are already on their way to buyer. The third batch of 47 boards are sent by EVE today. HYPE!

Check if your boards are shipped here: https://docs.google.com/spreadsheets/d/1TCDZcFQ9xTXeYg5rAniPHBbrZ67OtDi7PlLL6u8hcXI/edit#gid=0

Depending your location, your board maybe shipped by DPEX, DHL or EMS
Start with 5: https://dpex.com/Tools-And-Applications/Track-And-Trace
Start with 3, 6 or 8: http://www.dhl.com/en/express/tracking.html
Start with EV: https://www.ems.post/en/global-network/tracking
For EMS only, once the package enters your country, you can track it from your national post service for more detailed information.

Let me know if you have any questions. Thanks.

Eason

I must have missed that bit, thanks!

Puddsy · « **Reply #1343 on:** Fri, 05 January 2018, 12:41:22 »

Quote from: Sissy on Fri, 05 January 2018, 03:30:15

Show Image

Show Image

Show Image

Quick potato photos in the dying light.
67g Zeliostotles, zeal stabs.
really glad I went with the pink plate I think it ties it all together perfectly.

good color combo

megaforce · « **Reply #1344 on:** Fri, 05 January 2018, 17:26:08 »

Quote from: Sissy on Fri, 05 January 2018, 03:30:15

Show Image

Show Image

Show Image

Quick potato photos in the dying light.
67g Zeliostotles, zeal stabs.
really glad I went with the pink plate I think it ties it all together perfectly.

SERVAL

Eggplant · « **Reply #1345 on:** Fri, 05 January 2018, 19:19:03 »

Update potatoes!

Box Navys, Zeal stablizers, stainless steel back-plate / weight, R2 SA Calm Depths, Faded Skies Birb.

I'm not quite sure how I feel about the color matching quite yet, I'll probably try some more sets out

Puddsy · « **Reply #1346 on:** Fri, 05 January 2018, 19:22:18 »

Quote from: Eggplant on Fri, 05 January 2018, 19:19:03

Update potatoes!

(Attachment Link)
(Attachment Link)
(Attachment Link)

Box Navys, Zeal stablizers, stainless steel back-plate / weight, R2 SA Calm Depths, Faded Skies Birb.

I'm not quite sure how I feel about the color matching quite yet, I'll probably try some more sets out

god damn that's nice

Rumblehotep · « **Reply #1347 on:** Fri, 05 January 2018, 20:42:10 »

This is the most amazing shade of blue I've ever seen, what is it called? Blue-grey?

Eggplant · « **Reply #1348 on:** Fri, 05 January 2018, 20:51:00 »

Quote from: Rumblehotep on Fri, 05 January 2018, 20:42:10

This is the most amazing shade of blue I've ever seen, what is it called? Blue-grey?

The keyset colorway is Calm Depths. Also, please no one mention the upside-down key, I rushed it

Photoelectric · « **Reply #1349 on:** Fri, 05 January 2018, 21:33:37 »

Quote from: Eggplant on Fri, 05 January 2018, 20:51:00

Quote from: Rumblehotep on Fri, 05 January 2018, 20:42:10
This is the most amazing shade of blue I've ever seen, what is it called? Blue-grey?

The keyset colorway is Calm Depths. Also, please no one mention the upside-down key, I rushed it

I've done that so many times with swapped cap order... When I put caps on, I somewhat pay attention to their order, but since I touch-type, I often discover the inconsistencies only later (or after I already finished taking fancy photos, sigh).
. . .

Great to see everyone's photos! Need someone with a pink kit to post theirs too--I see a couple of those have tracking numbers.

News:

Author Topic: [GB] MIRA SE - Custom 80% Keyboard (CLOSED) (Read 753134 times)