Author Topic: [GB]Revo RJ kit hhkb layout custom(waiting to ship out) (Read 285101 times)

Perfex · « **Reply #900 on:** Sat, 23 September 2017, 15:14:24 »

Quote from: AlexG on Sat, 23 September 2017, 09:09:26

Anyone know the keys to control the backlighting?

Here are the B.face instructions, I’m going to assume it’s the same?

http://blog.winkeyless.kr/185

AlexG · « **Reply #901 on:** Sat, 23 September 2017, 17:58:49 »

Quote from: Perfex on Sat, 23 September 2017, 15:14:24

Quote from: AlexG on Sat, 23 September 2017, 09:09:26
Anyone know the keys to control the backlighting?

Here are the B.face instructions, I’m going to assume it’s the same?

http://blog.winkeyless.kr/185

They're not as far as I can tell. It's already been remapped for HHKB layout so I'm not sure what the fn layer has been changed to. It's definitely not the same.

Kafka · « **Reply #902 on:** Sat, 23 September 2017, 18:27:25 »

Shouldn't have ordered from Oco fml

gnmar2723 · « **Reply #903 on:** Sat, 23 September 2017, 20:10:34 »

Quote from: Kafka on Sat, 23 September 2017, 18:27:25

Shouldn't have ordered from Oco fml

It gets here when it gets here. :shrug:

If I've waited this long, I can wait just a little more.

mintyfruits · « **Reply #904 on:** Sat, 23 September 2017, 22:59:35 »

Quote from: gnmar2723 on Sat, 23 September 2017, 20:10:34

Quote from: Kafka on Sat, 23 September 2017, 18:27:25
Shouldn't have ordered from Oco fml

It gets here when it gets here. :shrug:

If I've waited this long, I can wait just a little more.

I think the frustration comes from the fact that we could have just ordered through Revo and not had to wait, period. I’m just jelly seeing everyone post their board, but ours haven’t shipped. ._.

RevoTeam · « **Reply #905 on:** Sun, 24 September 2017, 00:37:12 »

I just tried it on the Alu plate, and split backspace is a about 1mm higher than not split. The easy is to grind off that 1 mm on it. Or i can make some new plate when i get the money from paypal(could be very long).

RevoTeam · « **Reply #906 on:** Sun, 24 September 2017, 00:38:24 »

Quote from: AlexG on Sat, 23 September 2017, 17:58:49

Quote from: Perfex on Sat, 23 September 2017, 15:14:24
Quote from: AlexG on Sat, 23 September 2017, 09:09:26
Anyone know the keys to control the backlighting?

Here are the B.face instructions, I’m going to assume it’s the same?

http://blog.winkeyless.kr/185

They're not as far as I can tell. It's already been remapped for HHKB layout so I'm not sure what the fn layer has been changed to. It's definitely not the same.

Have you download bootmapper? It's all in there. You can change it to your liking.

AlexG · « **Reply #907 on:** Sun, 24 September 2017, 09:07:26 »

Quote from: RevoTeam on Sun, 24 September 2017, 00:37:12

I just tried it on the Alu plate, and split backspace is a about 1mm higher than not split. The easy is to grind off that 1 mm on it. Or i can make some new plate when i get the money from paypal(could be very long).

I think most people that want a split backspace are going to use a different plate. That's what I'm doing. Personally, I think you've done enough, the kit is amazing. I get happy every time I look down at it / type on it.

Skuloth · « **Reply #908 on:** Sun, 24 September 2017, 10:37:53 »

Can anyone recommend somewhere to buy an aluminum plate from?

AlexG · « **Reply #909 on:** Sun, 24 September 2017, 14:00:26 »

Quote from: Skuloth on Sun, 24 September 2017, 10:37:53

Can anyone recommend somewhere to buy an aluminum plate from?

1upkeyboards

Perfex · « **Reply #910 on:** Sun, 24 September 2017, 14:32:52 »

https://sentraq.com has some aluminum plates, 1up only has carbon, brass, and SS at the moment.

Skuloth · « **Reply #911 on:** Sun, 24 September 2017, 16:29:28 »

Quote from: AlexG on Sun, 24 September 2017, 14:00:26

Quote from: Skuloth on Sun, 24 September 2017, 10:37:53
Can anyone recommend somewhere to buy an aluminum plate from?

1upkeyboards

Quote from: Perfex on Sun, 24 September 2017, 14:32:52

https://sentraq.com has some aluminum plates, 1up only has carbon, brass, and SS at the moment.

Thanks guys

AlexG · « **Reply #912 on:** Sun, 24 September 2017, 22:34:32 »

I got my brass from 1up. Going to build with it when I get my Zeal60 in on Tuesday. Was half tempted to get the carbon fiber. The LEDs on the b.fake are way too dim

Puddsy · « **Reply #913 on:** Sun, 24 September 2017, 22:43:33 »

Quote from: AlexG on Sun, 24 September 2017, 22:34:32

I got my brass from 1up. Going to build with it when I get my Zeal60 in on Tuesday. Was half tempted to get the carbon fiber. The LEDs on the b.fake are way too dim

Try a color with higher forward voltage if you're talking about in-switch.

poq · « **Reply #914 on:** Tue, 26 September 2017, 04:13:11 »

My kit arrived today, managed to **** up building in about 5 minutes - forgot the stabilisers needed to go on before the plate

) Got it built though, still amazed by how solid it feels. Anyone have tips for getting rid / reducing spacebar rattle?

ambalek · « **Reply #915 on:** Tue, 26 September 2017, 05:59:01 »

Quote from: poq on Tue, 26 September 2017, 04:13:11

My kit arrived today, managed to **** up building in about 5 minutes - forgot the stabilisers needed to go on before the plate ) Got it built though, still amazed by how solid it feels. Anyone have tips for getting rid / reducing spacebar rattle?

I usually use thick lube on the stabiliser stems to reduce rattle. For my Revo build I actually used Zeal's transparent stabilisers and the spacebar sounds amazing (with thick lube and GMK caps). I couldn't really see a difference between the ones Raymond shipped and Zeal's, but I've had good experiences with the Zeal ones in other builds so I used those this time.

midnight2903 · « **Reply #916 on:** Tue, 26 September 2017, 09:40:56 »

Quote from: ambalek on Tue, 26 September 2017, 05:59:01

Quote from: poq on Tue, 26 September 2017, 04:13:11
My kit arrived today, managed to **** up building in about 5 minutes - forgot the stabilisers needed to go on before the plate ) Got it built though, still amazed by how solid it feels. Anyone have tips for getting rid / reducing spacebar rattle?

I usually use thick lube on the stabiliser stems to reduce rattle. For my Revo build I actually used Zeal's transparent stabilisers and the spacebar sounds amazing (with thick lube and GMK caps). I couldn't really see a difference between the ones Raymond shipped and Zeal's, but I've had good experiences with the Zeal ones in other builds so I used those this time.

Not to mention thick-lubing it prevented the stab wires from popping out when I pull out the keycaps. +1

ArchDill · « **Reply #917 on:** Tue, 26 September 2017, 11:48:02 »

Still waiting on Blue-Grey for O.co shipment?

Regret not getting it from Raymond...

:feelsbadman:

N0GLUT0N · « **Reply #918 on:** Tue, 26 September 2017, 23:34:08 »

Quote from: ArchDill on Tue, 26 September 2017, 11:48:02

Still waiting on Blue-Grey for O.co shipment?

Regret not getting it from Raymond...

:feelsbadman:

Ya I regret getting it from oco, I want to start building! Lol

Sent from my iPhone using Tapatalk

AlexG · « **Reply #919 on:** Wed, 27 September 2017, 19:40:40 »

Rebuilt using a brass plate and Zeal60. Pretty happy with the outcome. Figured some of you might be interested in what it sounds likes.

krispy · « **Reply #920 on:** Thu, 28 September 2017, 16:00:39 »

Any news on when the oco orders are going to ship?

Vadurr · « **Reply #921 on:** Thu, 28 September 2017, 16:25:47 »

+1 for oco updates

Puddsy · « **Reply #922 on:** Thu, 28 September 2017, 17:11:23 »

Quote from: krispy on Thu, 28 September 2017, 16:00:39

Any news on when the oco orders are going to ship?

Check kbdist

Vadurr · « **Reply #923 on:** Thu, 28 September 2017, 21:37:23 »

For the lazy:

2. REVO HHKB RJ Kit

I'm sorry for the delays. I'm awaiting information from the REVO team. Hopefully you guys can all be patient with this. I was told that this will be the only run for this REVO HHKB Kit.

RevoTeam · « **Reply #924 on:** Fri, 29 September 2017, 21:32:00 »

Hi Everyone

Sorry about not being here all the time.I just super busy with my work. And i just start my holiday for Chinese National day. It's a 8 days holiday for everyone in China,so nobody working for shipping. And i will ship Oco's order around 9th Oct. when everyone get back to work.

Thanks for understanding.

And about the plate,i will re-make some alu plate for RJ buyers after this buy is finished cause that way i can get my money back. I just need to something to cover the shipping. I will figure out how much shipping fee for a plate. Could be just a couple of dollars. Will have more info when i get back to work.

ArchDill · « **Reply #925 on:** Fri, 29 September 2017, 22:11:09 »

Quote from: RevoTeam on Fri, 29 September 2017, 21:32:00

Hi Everyone

Sorry about not being here all the time.I just super busy with my work. And i just start my holiday for Chinese National day. It's a 8 days holiday for everyone in China,so nobody working for shipping. And i will ship Oco's order around 9th Oct. when everyone get back to work.

Thanks for understanding.

And about the plate,i will re-make some alu plate for RJ buyers after this buy is finished cause that way i can get my money back. I just need to something to cover the shipping. I will figure out how much shipping fee for a plate. Could be just a couple of dollars. Will have more info when i get back to work.

Damn...

Vadurr · « **Reply #926 on:** Sat, 30 September 2017, 01:42:03 »

Quote from: ArchDill on Fri, 29 September 2017, 22:11:09

Quote from: RevoTeam on Fri, 29 September 2017, 21:32:00
Hi Everyone

Sorry about not being here all the time.I just super busy with my work. And i just start my holiday for Chinese National day. It's a 8 days holiday for everyone in China,so nobody working for shipping. And i will ship Oco's order around 9th Oct. when everyone get back to work.

Thanks for understanding.

And about the plate,i will re-make some alu plate for RJ buyers after this buy is finished cause that way i can get my money back. I just need to something to cover the shipping. I will figure out how much shipping fee for a plate. Could be just a couple of dollars. Will have more info when i get back to work.

Damn...

Tfw..tfw...tfw

Perfex · « **Reply #927 on:** Sat, 30 September 2017, 07:25:35 »

Quote

Tfw..tfw...tfw

Every day I seem to learn a new acronym, I guess I’m getting to old to keep up

)

Sent · « **Reply #928 on:** Sat, 30 September 2017, 23:29:04 »

Just some potato pics. Shout out to Badwrench for assembling it for me so quickly. Great guy.

eyedrop · « **Reply #929 on:** Sun, 01 October 2017, 00:47:29 »

That is beautiful.

Sent · « **Reply #930 on:** Sun, 01 October 2017, 01:39:15 »

Looks a bit better now. I noticed the keys were sunk in and realized the diffuser was installed. Took it out and voila. USB cable fits much better, too.

RevoTeam · « **Reply #931 on:** Sun, 01 October 2017, 06:06:49 »

Quote from: Sent on Sun, 01 October 2017, 01:39:15

Looks a bit better now. I noticed the keys were sunk in and realized the diffuser was installed. Took it out and voila. USB cable fits much better, too.

yup. Take the diffuser out and u will be just fine. And great pics btw. I liked them.

从我的 iPhone 发送，使用 Tapatalk

Sent · « **Reply #932 on:** Sun, 01 October 2017, 13:28:20 »

Thanks for the great board, Raymond. Nothing but pleased with it. I keep touching the anodizing, haha.

aquafreshfan · « **Reply #933 on:** Mon, 02 October 2017, 13:15:51 »

Wow, that pink looks awesome!

ioioioio · « **Reply #934 on:** Fri, 06 October 2017, 17:09:08 »

is there any chance how to get this revo hhkb kit again? or any open GB?

Puddsy · « **Reply #935 on:** Fri, 06 October 2017, 20:16:07 »

Quote from: ioioioio on Fri, 06 October 2017, 17:09:08

is there any chance how to get this revo hhkb kit again? or any open GB?

you gotta buy aftermarket, he said only one round

mnmlisme · « **Reply #936 on:** Sat, 07 October 2017, 02:36:21 »

bummer. I was looking for a HHKB layout case that's solid. any other option?

midnight2903 · « **Reply #937 on:** Sat, 07 October 2017, 07:16:11 »

Quote from: mnmlisme on Sat, 07 October 2017, 02:36:21

bummer. I was looking for a HHKB layout case that's solid. any other option?

Wait for fjell pro and probably not get it since it would be limited.

mnmlisme · « **Reply #938 on:** Sat, 07 October 2017, 07:45:00 »

Quote from: midnight2903 on Sat, 07 October 2017, 07:16:11

Quote from: mnmlisme on Sat, 07 October 2017, 02:36:21
bummer. I was looking for a HHKB layout case that's solid. any other option?

Wait for fjell pro and probably not get it since it would be limited.

yeah I know about fjell pro and yeah, probably won't score one lol revo is a really nice HHKB layout case, but yeah, missed it, like many other great GB out there lol

iNViSiBiLiTi · « **Reply #939 on:** Sat, 07 October 2017, 22:59:53 »

Quote from: mnmlisme on Sat, 07 October 2017, 02:36:21

bummer. I was looking for a HHKB layout case that's solid. any other option?

You could get a kbdfans Tina.

Puddsy · « **Reply #940 on:** Sun, 08 October 2017, 03:02:54 »

Quote from: iNViSiBiLiTi on Sat, 07 October 2017, 22:59:53

Quote from: mnmlisme on Sat, 07 October 2017, 02:36:21
bummer. I was looking for a HHKB layout case that's solid. any other option?

You could get a kbdfans Tina.

LZ CLS-H coming after CLS-M

gnmar2723 · « **Reply #941 on:** Sun, 08 October 2017, 09:12:20 »

Quote from: Puddsy on Sun, 08 October 2017, 03:02:54

Quote from: iNViSiBiLiTi on Sat, 07 October 2017, 22:59:53
Quote from: mnmlisme on Sat, 07 October 2017, 02:36:21
bummer. I was looking for a HHKB layout case that's solid. any other option?

You could get a kbdfans Tina.

LZ CLS-H coming after CLS-M

That's the first I've heard of that board. Any guess on how soon "soon" really is?

iNViSiBiLiTi · « **Reply #942 on:** Sun, 08 October 2017, 11:35:10 »

Quote from: gnmar2723 on Sun, 08 October 2017, 09:12:20

Quote from: Puddsy on Sun, 08 October 2017, 03:02:54
Quote from: iNViSiBiLiTi on Sat, 07 October 2017, 22:59:53
Quote from: mnmlisme on Sat, 07 October 2017, 02:36:21
bummer. I was looking for a HHKB layout case that's solid. any other option?

You could get a kbdfans Tina.

LZ CLS-H coming after CLS-M

That's the first I've heard of that board. Any guess on how soon "soon" really is?

LZ said he would be doing several keyboards with the CLS design in different layouts. First was TKL, then 75%, and lastly 60%.

Sent from my Pixel using Tapatalk

ArchDill · « **Reply #943 on:** Sun, 08 October 2017, 11:43:27 »

Does shipping resume today/tomorrow?

mintyfruits · « **Reply #944 on:** Sun, 08 October 2017, 13:28:40 »

Quote from: ArchDill on Sun, 08 October 2017, 11:43:27

Does shipping resume today/tomorrow?

My fingers are crossed!

ArchDill · « **Reply #945 on:** Tue, 10 October 2017, 10:58:56 »

O.co delivery update?

mnmlisme · « **Reply #946 on:** Tue, 10 October 2017, 16:18:57 »

Quote from: iNViSiBiLiTi on Sat, 07 October 2017, 22:59:53

Quote from: mnmlisme on Sat, 07 October 2017, 02:36:21
bummer. I was looking for a HHKB layout case that's solid. any other option?

You could get a kbdfans Tina.

I don't like Tina, not minimalis enough for my taste

mnmlisme · « **Reply #947 on:** Tue, 10 October 2017, 16:35:36 »

Quote from: Puddsy on Sun, 08 October 2017, 03:02:54

LZ CLS-H coming after CLS-M

korean made, 60%? thank you for info. now what do I have to do so I won't missed his IC/GB announcement? can I get notification somehow?

Puddsy · « **Reply #948 on:** Tue, 10 October 2017, 17:22:07 »

Quote from: mnmlisme on Tue, 10 October 2017, 16:35:36

can I get notification somehow?

No.

mnmlisme · « **Reply #949 on:** Tue, 10 October 2017, 19:09:03 »

Quote from: Puddsy on Tue, 10 October 2017, 17:22:07

Quote from: mnmlisme on Tue, 10 October 2017, 16:35:36
can I get notification somehow?

No.

thought so lol. ok will do it the ol' fashion way then *stares

News:

Author Topic: [GB]Revo RJ kit hhkb layout custom(waiting to ship out) (Read 285101 times)