Author Topic: [GB] E6-V2 Custom 60% Keyboard - INVOICED  (Read 47814 times)

0 Members and 2 Guests are viewing this topic.

Offline excluisve

  • Posts: 242
  • Location: Where? i will be there .
  • Making & Thinking.
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #550 on: Mon, 06 November 2017, 11:05:32 »
I have visit factory yesterday
Here is some pics

That looks great, I had a question Exclusive. The person I bought the spot from had previously decided what he wanted engraved in his nameplate and had let you know. By any chance is it possible for me to change what gets engraved in the plate?
emm.plz pm me the details and  u change

Offline BAS1C

  • Posts: 283
  • Location: Calgary, AB
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #551 on: Mon, 06 November 2017, 11:06:20 »
I have visit factory yesterday
Here is some pics

Awesome!! Is it on schedule to ship before end of year?

Offline excluisve

  • Posts: 242
  • Location: Where? i will be there .
  • Making & Thinking.
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #552 on: Mon, 06 November 2017, 11:08:04 »
I have visit factory yesterday
Here is some pics

Awesome!! Is it on schedule to ship before end of year?
Sure, if all things on track it may be ship out in the end of Nov
« Last Edit: Mon, 06 November 2017, 11:10:34 by excluisve »

Offline excluisve

  • Posts: 242
  • Location: Where? i will be there .
  • Making & Thinking.
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #553 on: Tue, 07 November 2017, 02:57:44 »
Updated guys

Is ready done here is the pictures

Is coming soon !

Offline Quakemz

  • Posts: 61
  • Location: Washington
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #554 on: Tue, 07 November 2017, 03:27:13 »
Oh man, that feelsgoodman.  :thumb:

Online Amnesia

  • Posts: 477
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #555 on: Tue, 07 November 2017, 04:09:39 »
Updated guys

Is ready done here is the pictures

Is coming soon !

Is that plate incomplete? Or did the design change? The original plate / case looked top mounted:



The one you posted looks like it would be gasket/clamp mounted (which doesn't necessarily bother me), just curious.


Offline excluisve

  • Posts: 242
  • Location: Where? i will be there .
  • Making & Thinking.
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #556 on: Tue, 07 November 2017, 04:15:22 »
Updated guys

Is ready done here is the pictures

Is coming soon !

Is that plate incomplete? Or did the design change? The original plate / case looked top mounted:

Show Image


The one you posted looks like it would be gasket/clamp mounted (which doesn't necessarily bother me), just curious.
Yep .chang it ,is make more convenience

Offline blacksimon

  • Posts: 22
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #557 on: Tue, 07 November 2017, 04:41:21 »
very nice seeing updates!

I'd love to see the hhkb style tops when theyre ready  :-X

Online Amnesia

  • Posts: 477
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #558 on: Tue, 07 November 2017, 04:58:17 »
Updated guys

Is ready done here is the pictures

Is coming soon !

Is that plate incomplete? Or did the design change? The original plate / case looked top mounted:

Show Image


The one you posted looks like it would be gasket/clamp mounted (which doesn't necessarily bother me), just curious.
Yep .chang it ,is make more convenience

As long as it's machined well and it clamps tight and doesn't woble and doesn't leave a gap I'm perfectly fine with it. I think the main reason people do top mount is it's hard to to a clamp mount that is tight with no gap. Is it using a gasket? Or just tight tolerances?

Offline excluisve

  • Posts: 242
  • Location: Where? i will be there .
  • Making & Thinking.
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #559 on: Tue, 07 November 2017, 05:02:09 »
Updated guys

Is ready done here is the pictures

Is coming soon !

Is that plate incomplete? Or did the design change? The original plate / case looked top mounted:

Show Image


The one you posted looks like it would be gasket/clamp mounted (which doesn't necessarily bother me), just curious.
Yep .chang it ,is make more convenience

As long as it's machined well and it clamps tight and doesn't woble and doesn't leave a gap I'm perfectly fine with it. I think the main reason people do top mount is it's hard to to a clamp mount that is tight with no gap. Is it using a gasket? Or just tight tolerances?
No worry is tight enough .just tight tolerances

Online Amnesia

  • Posts: 477
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #560 on: Tue, 07 November 2017, 05:04:38 »
Updated guys

Is ready done here is the pictures

Is coming soon !

Is that plate incomplete? Or did the design change? The original plate / case looked top mounted:

Show Image


The one you posted looks like it would be gasket/clamp mounted (which doesn't necessarily bother me), just curious.
Yep .chang it ,is make more convenience

As long as it's machined well and it clamps tight and doesn't woble and doesn't leave a gap I'm perfectly fine with it. I think the main reason people do top mount is it's hard to to a clamp mount that is tight with no gap. Is it using a gasket? Or just tight tolerances?
No worry is tight enough .just tight tolerances

Works for me. Makes it easier to swap parts :P

Online Oscar2177

  • Posts: 33
  • Location: Texas
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #561 on: Tue, 07 November 2017, 09:01:56 »
Updated guys

Is ready done here is the pictures

Is coming soon !

That looks soo nice, It's the same colors as the one I got. Can't wait for everything to finish. Hope everything turns out well exclusive.

Offline excluisve

  • Posts: 242
  • Location: Where? i will be there .
  • Making & Thinking.
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #562 on: Tue, 07 November 2017, 09:06:26 »
Updated guys

Is ready done here is the pictures

Is coming soon !

That looks soo nice, It's the same colors as the one I got. Can't wait for everything to finish. Hope everything turns out well exclusive.
Thanks
I have saw u pm but today I am in factory ,tomorrow I will check it  again

Online Oscar2177

  • Posts: 33
  • Location: Texas
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #563 on: Tue, 07 November 2017, 09:10:44 »
Updated guys

Is ready done here is the pictures

Is coming soon !

That looks soo nice, It's the same colors as the one I got. Can't wait for everything to finish. Hope everything turns out well exclusive.
Thanks
I have saw u pm but today I am in factory ,tomorrow I will check it  again

Sounds good

Online Kafka

  • Posts: 225
  • There is only but beige
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #564 on: Tue, 07 November 2017, 09:41:22 »
Pictures look amazing  :eek:

Offline excluisve

  • Posts: 242
  • Location: Where? i will be there .
  • Making & Thinking.
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #565 on: Wed, 08 November 2017, 03:18:05 »
I have make a new sheet ,which all information is here

if have any mistake plz pm me here on gh not email

thanks all.
https://docs.google.com/spreadsheets/d/1UrUP8ufV3lFuJtnk6Bw2b3kcig6vGFWc6EE35jTFAQo/edit?usp=sharing

Online Damonskv

  • Posts: 251
  • Location: Moscow, Russia
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #566 on: Wed, 08 November 2017, 03:30:35 »
I have make a new sheet ,which all information is here

if have any mistake plz pm me here on gh not email

thanks all.
https://docs.google.com/spreadsheets/d/1UrUP8ufV3lFuJtnk6Bw2b3kcig6vGFWc6EE35jTFAQo/edit?usp=sharing

Great work, man. Looking forward to the end of November ;)

Offline oluigenuma

  • Posts: 25
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #567 on: Wed, 08 November 2017, 03:53:23 »
I see Im still on there. What does the blue color mean?


Gesendet von iPhone mit Tapatalk

Offline excluisve

  • Posts: 242
  • Location: Where? i will be there .
  • Making & Thinking.
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #568 on: Wed, 08 November 2017, 03:54:42 »
I see Im still on there. What does the blue color mean?


Gesendet von iPhone mit Tapatalk
Is means is making but order not paid  :)
Never mind

Offline oluigenuma

  • Posts: 25
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #569 on: Wed, 08 November 2017, 03:56:08 »
So can I pay and get the board?^^ Havent had my money back when you invoiced.


Gesendet von iPhone mit Tapatalk

Offline excluisve

  • Posts: 242
  • Location: Where? i will be there .
  • Making & Thinking.
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #570 on: Wed, 08 November 2017, 03:57:15 »
So can I pay and get the board?^^ Havent had my money back when you invoiced.


Gesendet von iPhone mit Tapatalk
Yep is belong to u
But when after others ship out it may not be reserved

Online ptiede

  • Posts: 36
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #571 on: Wed, 08 November 2017, 08:50:09 »
I have make a new sheet ,which all information is here

if have any mistake plz pm me here on gh not email

thanks all.
https://docs.google.com/spreadsheets/d/1UrUP8ufV3lFuJtnk6Bw2b3kcig6vGFWc6EE35jTFAQo/edit?usp=sharing


Mine looks perfect! Great work!

Online Kafka

  • Posts: 225
  • There is only but beige
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #572 on: Wed, 08 November 2017, 11:51:26 »
How will the founders numbers work? Since there are not the same amount of total founders

Offline BAS1C

  • Posts: 283
  • Location: Calgary, AB
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #573 on: Wed, 08 November 2017, 11:53:57 »
How will the founders numbers work? Since there are not the same amount of total founders

If there's extra one's, I am in :)

Online ptiede

  • Posts: 36
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #574 on: Wed, 08 November 2017, 12:35:33 »
How will the founders numbers work? Since there are not the same amount of total founders

If there's extra one's, I am in :)

I'm also in to pay a little extra if there are some founders editions left.

Offline Peiweisgreat

  • Posts: 49
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #575 on: Wed, 08 November 2017, 16:26:37 »
Man those pics of the cases look sweet. Makes all wait and the confusion fly out the window! Sad to see the plate get changed, but this is probably for the best. So glad I stayed in the GB.

Online Oscar2177

  • Posts: 33
  • Location: Texas
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #576 on: Wed, 08 November 2017, 16:38:23 »
Man those pics of the cases look sweet. Makes all wait and the confusion fly out the window! Sad to see the plate get changed, but this is probably for the best. So glad I stayed in the GB.

So is there only 2 pieces to the keyboard instead of 3 or how is it. I got a little confused when I read that.

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 3417
  • Location: United Kingdom
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #577 on: Wed, 08 November 2017, 16:39:53 »
Man those pics of the cases look sweet. Makes all wait and the confusion fly out the window! Sad to see the plate get changed, but this is probably for the best. So glad I stayed in the GB.

So is there only 2 pieces to the keyboard instead of 3 or how is it. I got a little confused when I read that.

5 - top, mid, plate, bottom, weight. Plate was changed from screwing into the top into being mounted between the top and mid with pressure.

Offline excluisve

  • Posts: 242
  • Location: Where? i will be there .
  • Making & Thinking.
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #578 on: Wed, 08 November 2017, 17:18:29 »
Man those pics of the cases look sweet. Makes all wait and the confusion fly out the window! Sad to see the plate get changed, but this is probably for the best. So glad I stayed in the GB.
No worry plate change just make it swap convenience

Is not big deal ,plate between top and middle  is tight and not waggle

Offline excluisve

  • Posts: 242
  • Location: Where? i will be there .
  • Making & Thinking.
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #579 on: Wed, 08 November 2017, 17:19:55 »
Man those pics of the cases look sweet. Makes all wait and the confusion fly out the window! Sad to see the plate get changed, but this is probably for the best. So glad I stayed in the GB.

So is there only 2 pieces to the keyboard instead of 3 or how is it. I got a little confused when I read that.
Is 5 pieces . Top plate middle bottom weight

Online Amnesia

  • Posts: 477
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #580 on: Wed, 08 November 2017, 18:18:22 »
To be clear. As long as the machining tolerance is tight, this design should be MORE stable, not less. The plate should be supported on the entirety of every edge by the case. As long as the cutout is the same depth as the plate, which should be extremely consistent since they just cut them from prefabbed sheets, there is no issue. The risks come from the gap being to small which would leave a gap between the top case and the mid case, or too big, in which case the plate could move up and down. As long as the size is right though, its better. Plus it makes it much much easier to swap plates.

Im actually kinda excited its gasket mount, its way less common.

Exclusive says there is no wobble, and I have no reason to not believe him, so in my book this is a good thing.

Offline excluisve

  • Posts: 242
  • Location: Where? i will be there .
  • Making & Thinking.
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #581 on: Wed, 08 November 2017, 18:24:29 »
To be clear. As long as the machining tolerance is tight, this design should be MORE stable, not less. The plate should be supported on the entirety of every edge by the case. As long as the cutout is the same depth as the plate, which should be extremely consistent since they just cut them from prefabbed sheets, there is no issue. The risks come from the gap being to small which would leave a gap between the top case and the mid case, or too big, in which case the plate could move up and down. As long as the size is right though, its better. Plus it makes it much much easier to swap plates.

Im actually kinda excited its gasket mount, its way less common.

Exclusive says there is no wobble, and I have no reason to not believe him, so in my book this is a good thing.
Yep ,top and mid have a gap is 1.5mm depth so plate place on there .
Top and mid hold on plate is no doubt that will waggle

Offline afrokobe

  • Posts: 189
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #582 on: Wed, 08 November 2017, 18:50:20 »
yea a lot of people prefer gasket mount over top mount too.  The gaskets allow a more soft? typing experiences since its not fixed top plate.  356 minis were gasket mounted

Online Kafka

  • Posts: 225
  • There is only but beige
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #583 on: Wed, 08 November 2017, 19:24:00 »

E6 gets better day by day ( ͡ ͜ʖ ͡) /

Online Amnesia

  • Posts: 477
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #584 on: Wed, 08 November 2017, 20:52:54 »
yea a lot of people prefer gasket mount over top mount too.  The gaskets allow a more soft? typing experiences since its not fixed top plate.  356 minis were gasket mounted

Technically I think this is considered a sandwich mount. Gasket would have something soft to hold the plate tight. Like a rubber ring around the edge of the plate. If you put the gasket under the plate you get a softer feel, if the gasket is above the plate it just holds it tight.

In theory Exclusive could make a gasket mount mod for this since it would just involve making a top or mid case with a deeper cut. The harder part would just be getting a decent gasket.

Online Kafka

  • Posts: 225
  • There is only but beige
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #585 on: Wed, 08 November 2017, 21:25:25 »
yea a lot of people prefer gasket mount over top mount too.  The gaskets allow a more soft? typing experiences since its not fixed top plate.  356 minis were gasket mounted

Technically I think this is considered a sandwich mount. Gasket would have something soft to hold the plate tight. Like a rubber ring around the edge of the plate. If you put the gasket under the plate you get a softer feel, if the gasket is above the plate it just holds it tight.

In theory Exclusive could make a gasket mount mod for this since it would just involve making a top or mid case with a deeper cut. The harder part would just be getting a decent gasket.

I'd def pay to get a gasket option.

Online Oscar2177

  • Posts: 33
  • Location: Texas
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #586 on: Wed, 08 November 2017, 21:31:10 »
yea a lot of people prefer gasket mount over top mount too.  The gaskets allow a more soft? typing experiences since its not fixed top plate.  356 minis were gasket mounted

Technically I think this is considered a sandwich mount. Gasket would have something soft to hold the plate tight. Like a rubber ring around the edge of the plate. If you put the gasket under the plate you get a softer feel, if the gasket is above the plate it just holds it tight.

In theory Exclusive could make a gasket mount mod for this since it would just involve making a top or mid case with a deeper cut. The harder part would just be getting a decent gasket.

I'd def pay to get a gasket option.

same

Offline excluisve

  • Posts: 242
  • Location: Where? i will be there .
  • Making & Thinking.
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #587 on: Wed, 08 November 2017, 21:32:11 »
Case were ready done , it wont have gasket option guys

Online Amnesia

  • Posts: 477
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #588 on: Wed, 08 November 2017, 21:38:52 »
Case were ready done , it wont have gasket option guys

I mean like an add on. Not a change to existing orders.

It would 100% be possible to make a midcase that was a little deeper and had room for an oring like a 356:



And I just mean it's possible. I have no clue if there would be enough interest to justify it. But I could totally see ordering another midcase/plate just for gasket, even if I had to wait another few months to get the new parts. The point is you already have the CNC design done, adding an oring would just be cutting more out of your existing design. Now if it's worth it? Who knows.

Either way, I AM NOT suggesting that you delay this gb for gasket mount. My point is you could sell it as an add on kit to people who already got E6-V2.

Offline excluisve

  • Posts: 242
  • Location: Where? i will be there .
  • Making & Thinking.
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #589 on: Wed, 08 November 2017, 22:23:21 »
Case were ready done , it wont have gasket option guys

I mean like an add on. Not a change to existing orders.

It would 100% be possible to make a midcase that was a little deeper and had room for an oring like a 356:

Show Image


And I just mean it's possible. I have no clue if there would be enough interest to justify it. But I could totally see ordering another midcase/plate just for gasket, even if I had to wait another few months to get the new parts. The point is you already have the CNC design done, adding an oring would just be cutting more out of your existing design. Now if it's worth it? Who knows.

Either way, I AM NOT suggesting that you delay this gb for gasket mount. My point is you could sell it as an add on kit to people who already got E6-V2.
Yea,i know it may support in next 60% project.
thanks for those comments

Offline excluisve

  • Posts: 242
  • Location: Where? i will be there .
  • Making & Thinking.
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #590 on: Wed, 08 November 2017, 22:40:10 »
i havent get 356mini so i dont know about gasket what actually is ? sry.

Online Amnesia

  • Posts: 477
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #591 on: Wed, 08 November 2017, 23:11:41 »
i havent get 356mini so i dont know about gasket what actually is ? sry.

It's the red rubber thing on the bottom left corner of that pcb/plate.

The idea is rubber can be compressed/squeezed. So if your plate is 1.5mm, you make the cutout 3mm, then you use a like 1.7mm (how much thicker will determine how stiff the board is, i have no clue how thick is correct, 1.7 is just a random number) diameter oring between the plate and the bottom case. Then when you screw the case together the 3.2mm of plate/gasket get compressed to 3mm, so you get a nice tight fit, and a no gaps at all. But unlike a top or sandwhich mount, that means what your plate is resting on is not metal, but rubber or silicone or something, so you get a softer feel. I think it also sounds different.

That 356 plate is customized more, the gasket is only compressed on the parts that stick out, so the middle of the pcb is free floating, and if i remember right they actually did stuff to the pcb to make it flex MORE for linear switches.

The real advantage of a gasket is it could be tunable, you could have a thicker, softer rubber gasket for a softer feel, or a thiner but stiffer rubber gasket for a stiffer more traditional feel. You could even make cnc metal/plastic gaskets if you didn't want any play.

Here's a simple cross section example:


Online Amnesia

  • Posts: 477
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #592 on: Wed, 08 November 2017, 23:16:52 »
Oh, and to be clear, that isn't to scale or anything. Just meant to convey the concept.

Theres lots of ways you can mount the oring, to the plate, to the case, you could just use rubber strips on top and bottom. You could make the rubber stay in place better make making it inset into the midcase.

Gasket style cases are super uncommon though, so I do think there would be good interest in general for a nice one.

Offline excluisve

  • Posts: 242
  • Location: Where? i will be there .
  • Making & Thinking.
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #593 on: Wed, 08 November 2017, 23:44:20 »
Oh, and to be clear, that isn't to scale or anything. Just meant to convey the concept.

Theres lots of ways you can mount the oring, to the plate, to the case, you could just use rubber strips on top and bottom. You could make the rubber stay in place better make making it inset into the midcase.

Gasket style cases are super uncommon though, so I do think there would be good interest in general for a nice one.
Got it thanks .have a lesson to me . :thumb:

Online nonah

  • Posts: 20
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #594 on: Thu, 09 November 2017, 00:38:09 »
Would definitely pay extra for an another mid piece with rubber gasket support (and potentially another plate as well).

You could always offer an addon kit after the GB has concluded. If there is enough interest it might just be worth it :)

Offline excluisve

  • Posts: 242
  • Location: Where? i will be there .
  • Making & Thinking.
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #595 on: Sun, 12 November 2017, 20:55:37 »
Finally I got brass weight

But I have a question what is kind of treatment it should be

Keep it real or sanding blasting  ,
pvd I think not better it will make weight  thicken that may can't put in bottom
what is u guys opinion there only choose one road

Offline BAS1C

  • Posts: 283
  • Location: Calgary, AB
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #596 on: Sun, 12 November 2017, 21:05:45 »
Finally I got brass weight

But I have a question what is kind of treatment it should be

Keep it real or sanding blasting  ,
pvd I think not better it will make weight  thicken that may can't put in bottom
what is u guys opinion there only choose one road

Shiny is best option, if possible...

Online Oscar2177

  • Posts: 33
  • Location: Texas
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #597 on: Sun, 12 November 2017, 21:13:10 »
Finally I got brass weight

But I have a question what is kind of treatment it should be

Keep it real or sanding blasting  ,
pvd I think not better it will make weight  thicken that may can't put in bottom
what is u guys opinion there only choose one road

I agree, I just saw someone post a picture of the brass weight on the m65 and it looks nice.
Shiny is best option, if possible...

Offline bthezebra

  • Posts: 64
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #598 on: Sun, 12 November 2017, 21:17:15 »
Finally I got brass weight

But I have a question what is kind of treatment it should be

Keep it real or sanding blasting  ,
pvd I think not better it will make weight  thicken that may can't put in bottom
what is u guys opinion there only choose one road

Shiny is best option, if possible...

I think exclusive is saying that he cannot do PVD, aka shiny, because it will not fit in the case. So I believe he is saying the only two options are raw brass or sand blasted, neither of which are shiny.
« Last Edit: Sun, 12 November 2017, 21:30:33 by bthezebra »

Offline gaiden

  • Posts: 309
Re: [GB] E6-V2 Custom 60% Keyboard - INVOICED
« Reply #599 on: Sun, 12 November 2017, 21:18:43 »
Finally I got brass weight

But I have a question what is kind of treatment it should be

Keep it real or sanding blasting  ,
pvd I think not better it will make weight  thicken that may can't put in bottom
what is u guys opinion there only choose one road
Would prefer shiny.

Sent from my SM-G935F using Tapatalk