The Lube:Water ratio for this is 1:1
Also, to apply RO-59tmKT:
1. Clean target surface
2. Brush on RO-59 so surface is covered, but not so much that puddles are created
3. Air dry until liquid evaporates. Paperwork says 30 minutes, but can take longer depending on the humidity
4. At this point, there are two options:
a. Heat at 65C for 3 minutes (for example, using a hairdryer)
b. Air dry for another 1-2x the time it took for the liquid to evaporate
NOTE: RO-59 should be stored out of direct sunlight, and should be shaken once a week to prevent sedimentation. Unapplied lube expires 1 year from manufacture.