Author Topic: [GB] MARS 8.0 (sorting and shipping)  (Read 19921 times)

Baconheart and 1 Guest are viewing this topic.

Offline geewizwow

  • Posts: 18
  • Location: Sunny Scotland
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #250 on: Fri, 27 April 2018, 03:09:30 »
Taking shape




Offline vewy_nice

  • Posts: 195
  • Location: NH, USA
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #251 on: Fri, 27 April 2018, 06:34:33 »
Those "easy-out" things are hard as frig to use, especially on small screws and bolts.

Is it COMPLETELY rounded? 
Sometimes I find that you can fit a Torx driver of a slightly larger size into stripped hex bolts and it'll grip like mad, especially if you force it down into the root of the socket.

Offline crusader_alex

  • Posts: 34
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #252 on: Fri, 27 April 2018, 06:36:49 »
Those "easy-out" things are hard as frig to use, especially on small screws and bolts.

Is it COMPLETELY rounded? 
Sometimes I find that you can fit a Torx driver of a slightly larger size into stripped hex bolts and it'll grip like mad, especially if you force it down into the root of the socket.
Yeah it's kinda completely rounded.I'll probably resort to drilling the screw and hammering a torx head in or something.

Sent from my ONEPLUS A5000 using Tapatalk


Offline vewy_nice

  • Posts: 195
  • Location: NH, USA
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #253 on: Fri, 27 April 2018, 06:41:37 »
See if you can find a left handed drill bit of the appropriate size. Sometimes when you're trying to drill the head off, it'll just magically back the screw out for you!

Also, another option is to get a bit that's slightly bigger than the threads of the screw, and drill the head off, so you're left with just a "stud" with threads left. Then lift the back case off, and grip the stem with pliers, and twist them out that way!

If you don't feel comfortable fixing it, I know it'd be expensive, but I do a lot of really small, delicate work, and I have a really nice drill press. I could do it for you. (Wrap that sucker in high-density foam and lots of tape to protect that beautiful finish, whatever you do!)
Maybe you're nearby, who knows.
« Last Edit: Fri, 27 April 2018, 06:45:35 by vewy_nice »

Offline crusader_alex

  • Posts: 34
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #254 on: Fri, 27 April 2018, 07:16:02 »
See if you can find a left handed drill bit of the appropriate size. Sometimes when you're trying to drill the head off, it'll just magically back the screw out for you!

Also, another option is to get a bit that's slightly bigger than the threads of the screw, and drill the head off, so you're left with just a "stud" with threads left. Then lift the back case off, and grip the stem with pliers, and twist them out that way!

If you don't feel comfortable fixing it, I know it'd be expensive, but I do a lot of really small, delicate work, and I have a really nice drill press. I could do it for you. (Wrap that sucker in high-density foam and lots of tape to protect that beautiful finish, whatever you do!)
Maybe you're nearby, who knows.
Hm i haven't seen the second method used but it sounds like it'd get the job done.So i basically just drill the top of the screw off? Won't that risk damaging the inner thread though?

Sent from my ONEPLUS A5000 using Tapatalk


Offline hachi8free

  • Posts: 1
  • Location: Japan
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #255 on: Fri, 27 April 2018, 08:21:34 »
4 buyers who bought 86 keys layout will get new PCBs: sykim0310, Vewy_nice, hachi8free, tlautrec

Adding more solders on the 4 pins of the LED should fix 90% LED issues. Let me know if the LED doesn't work anyway.

The PCB supplier is the guy who provided PCBs for most Chinese custom keyboards. I didn't expect he would make such mistakes.

@Sylvester Thanks! I haven't checked with Bootmapper, but when I connecting PCB to the computer, all LEDs glowed white.
I broke diffuser when I tried to remove it... I want you to send it with new pcb if there is any extra.
Thank you.
« Last Edit: Fri, 27 April 2018, 08:27:04 by hachi8free »

Offline Remsky

  • Posts: 91
  • Location: Portland, OR
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #256 on: Sat, 28 April 2018, 00:00:03 »
emailed you about some pcb issues. @sylvester

Offline Water lee

  • Posts: 3
  • Location: LA
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #257 on: Sat, 28 April 2018, 11:39:23 »
Nice board.I just missed it

Offline fatpolomanjr

  • Posts: 181
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #258 on: Sat, 28 April 2018, 18:52:42 »
I finished building for Jeffboird: Mars 8.0 with GMK Blue on Black, 65g Zealios and holtites. Some of the holtites were a perfect fit, but at least 20 switches needed them to be soldered in place.





Minor dings on the plate, like others, and a few on the case. One LED has a bad blue (the one on the bottom row near z/x/v) but otherwise a very solid group buy and board. :D

Offline geewizwow

  • Posts: 18
  • Location: Sunny Scotland
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #259 on: Sun, 29 April 2018, 03:38:46 »
A very good looking board. Congrats to you and jeffboird!

A word of warning before anyone makes the same mistake as me, 2x3x4 leds in the south position will make contact with gmk caps. Iíve ordered some 1.8mm leds and Iíll let you know if those work.

Another thing to point out. If you have the underglow on, leds will not shine at their maximum brightness. Although that could just be the USB port Iím using.

Offline Kira

  • Posts: 162
  • Location: NY
  • <3 <3 <3 <3
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #260 on: Sun, 29 April 2018, 11:46:21 »
Damn I missed this =/ Anyone know of any other similar WKL keyboards on GBs?

Daily Driver: QFR w/ Vortex Aluminum case BROWNS

Offline Puddsy

  • Foreman of the salt mine
  • * Exalted Elder
  • Posts: 8469
  • Location: New England
  • Can't handle the heat? Stay out of the kitchen.
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #261 on: Sun, 29 April 2018, 12:35:49 »
Damn I missed this =/ Anyone know of any other similar WKL keyboards on GBs?

TKLs always coming, keep an eye on the interest check subforum
QFR | MJ2 TKL | Realforce 87U | G81-3000 "Schumiboard" | Varmilo Bulgogiboard (Keycon 104) | KBD75 | MIRA (Clearsuns) | Weaven (MOD-M) | TGR Alice (soon!) | A secret board

has puddsy gotten an award for person most involved with things hes not involved in at all, yet?

Offline Grimspoon

  • Posts: 59
  • Location: Windsor, ON
    • Reddit
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #262 on: Mon, 30 April 2018, 00:00:10 »
What type of screws are holding the case together? I can barely tell what I'm looking at here. Are these allen key? I feel like I may have stripped one but I also feel like I can't tell what screw head these are either. Also feel like it takes a lot to squeeze the case actually closed.

Someone said M2 earlier. I'll have to grab a proper set.

« Last Edit: Mon, 30 April 2018, 00:04:40 by Grimspoon »
Ducky Shine 3, Plank, JD40, JD45

Offline fatpolomanjr

  • Posts: 181
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #263 on: Mon, 30 April 2018, 01:38:15 »
M2.5 I believe. They are allen / hex key. I replaced them with standard flathead m2.5 screws because using a hex key to open it up every time is annoying. Just be sure to get the right length.

Offline crusader_alex

  • Posts: 34
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #264 on: Mon, 30 April 2018, 01:41:43 »
What type of screws are holding the case together? I can barely tell what I'm looking at here. Are these allen key? I feel like I may have stripped one but I also feel like I can't tell what screw head these are either. Also feel like it takes a lot to squeeze the case actually closed.

Someone said M2 earlier. I'll have to grab a proper set.
They are m2.5 x 8

Sent from my ONEPLUS A5000 using Tapatalk


Offline Grimspoon

  • Posts: 59
  • Location: Windsor, ON
    • Reddit
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #265 on: Mon, 30 April 2018, 05:26:40 »
Thanks for the quick replies. Will be replacing them asap.
Ducky Shine 3, Plank, JD40, JD45

Offline Grimspoon

  • Posts: 59
  • Location: Windsor, ON
    • Reddit
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #266 on: Mon, 30 April 2018, 16:02:24 »
What type of screws are holding the case together? I can barely tell what I'm looking at here. Are these allen key? I feel like I may have stripped one but I also feel like I can't tell what screw head these are either. Also feel like it takes a lot to squeeze the case actually closed.

Someone said M2 earlier. I'll have to grab a proper set.

Turns out I just needed my good allen key set from work. Everything is fine. Except my diffuser snapped the moment I looked at it. Also those m2.5 screw holes were tight as hell. But everything is fine.
Ducky Shine 3, Plank, JD40, JD45

Online sykim0310

  • Posts: 4
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #267 on: Mon, 14 May 2018, 07:01:34 »
Today a new pcb arrived.
This pcb still doesn't fit into my top case.

1. There is no stab hole.
2. The left window key switch hole is incorrect.

Do I have to wait for another 2 weeks and get a new pcb?
Or do I need to get a refund?

Offline crusader_alex

  • Posts: 34
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #268 on: Fri, 18 May 2018, 07:15:46 »
Does anyone know what drivers this uses because i got an error that says device descriptor failed,basically rendering the keyboard unusable.Can i fix this just by replacing the drivers or do i need a new pcb?

Offline geewizwow

  • Posts: 18
  • Location: Sunny Scotland
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #269 on: Fri, 18 May 2018, 08:52:50 »
You have to hold either u or ctrl+u while plugging it in.
Itís all in the bootmapper docs.

Cheers

Offline crusader_alex

  • Posts: 34
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #270 on: Fri, 18 May 2018, 11:25:12 »
This worked!Thank you so much

Offline tlautrec

  • Posts: 9
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #271 on: Tue, 22 May 2018, 03:14:40 »
Today a new pcb arrived.
This pcb still doesn't fit into my top case.

1. There is no stab hole.
2. The left window key switch hole is incorrect.

Do I have to wait for another 2 weeks and get a new pcb?
Or do I need to get a refund?

Did anyone get any replies/news re: the new pcb? :(

Offline vewy_nice

  • Posts: 195
  • Location: NH, USA
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #272 on: Tue, 22 May 2018, 06:31:51 »
I am unsure what rev. PCB I received, but mine has stabilizer holes.
I haven't yet started assembling yet, so I don't know if it's the most recent or not.

Online Baconheart

  • Posts: 5
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #273 on: Tue, 22 May 2018, 06:53:26 »
Today a new pcb arrived.
This pcb still doesn't fit into my top case.

1. There is no stab hole.
2. The left window key switch hole is incorrect.

Do I have to wait for another 2 weeks and get a new pcb?
Or do I need to get a refund?

Did anyone get any replies/news re: the new pcb? :(

I emailed Sylvester about a different issue on the 15th and haven't received a reply.

Offline tlautrec

  • Posts: 9
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #274 on: Tue, 22 May 2018, 10:05:45 »
I am unsure what rev. PCB I received, but mine has stabilizer holes.
I haven't yet started assembling yet, so I don't know if it's the most recent or not.

Iím referring to the 86 key TKL pcbs that didnt quite work out both the first and second round. :(

Offline vewy_nice

  • Posts: 195
  • Location: NH, USA
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #275 on: Tue, 22 May 2018, 12:10:57 »
Yeah that's what I'm talking about.

I got 2 PCB's, the original one that didn't work with my case layout, and a second one that has stab holes, but I haven't checked if it lines up with the layout properly yet (Desk is messy, too many other projects!)

I am also waiting on the last of the 3 MARS accent inserts I ordered... Since my original package was missing 2, and the second PCB came with 2 others, but one of them was the wrong color, and machined wrong!

Offline thokir

  • Posts: 61
  • Location: RLP, Germany
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #276 on: Tue, 22 May 2018, 16:36:58 »
Just finished building mine after it arrived this morning.
I initially ordered a gray one, which (luckily) didn't pass QC. Sylvester then gave me the possibility to change the colour to black. Due to that the shipping took quite a bit longer than planned.

The white Mars box looks super nice, defenitely something I'm gonna keep, in case the board won't be standing on my desk all time. The pen also looks good, feels very worthy. Didn't get to try it yet.

One pcb works fine, though bootmapper client is kinda special to use for me... but it works. Still gotta test the second one.
My board is completely flawless without any dents or ano issues, just simple and nice black.
The diffuser sits very stiff, but I already removed and re-applied mine twice without breaking it.
One issue with it, though: The screws are about 1mm too long to use the board without the diffuser. Gonna fix that for me tomorrow, due to shortening the screws.
I have no idea why, but my screws are golden - I'm very impressed by that, looks better with brass plate and brass inlay than silver screws would do.

Right now I have no quality pictures due to bad lightening, but maybe I'll post some tomorrow.

Btw, weight is 3,45kg (7,6lb). I'm suuuper happy with this :)


e: On the second pcb, only 4 of the rgb leds are working. The others are red and won't change their color.
Sylvester, I don't really need a new pcb with them working, but how about a partial refund of the $40 for the second pcb? :)
« Last Edit: Tue, 22 May 2018, 17:19:47 by thokir »

Offline crusader_alex

  • Posts: 34
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #277 on: Tue, 22 May 2018, 17:52:16 »
Guys i kinda ****ed something up on bootmapper and wiped the whole layout.Can someone please take a pic of the layout (wkl) so i can remap it by hand?

Offline tlautrec

  • Posts: 9
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #278 on: Tue, 22 May 2018, 22:52:13 »
Yeah that's what I'm talking about.

I got 2 PCB's, the original one that didn't work with my case layout, and a second one that has stab holes, but I haven't checked if it lines up with the layout properly yet (Desk is messy, too many other projects!)

I am also waiting on the last of the 3 MARS accent inserts I ordered... Since my original package was missing 2, and the second PCB came with 2 others, but one of them was the wrong color, and machined wrong!

Fingers crossed for the stab holes to be there. Iím currently travelling so I canít verify my pcbs yet :í( let me know when you eventually get down to building! :)
« Last Edit: Tue, 22 May 2018, 23:29:24 by tlautrec »

Offline thokir

  • Posts: 61
  • Location: RLP, Germany
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #279 on: Wed, 23 May 2018, 00:44:26 »
Guys i kinda ****ed something up on bootmapper and wiped the whole layout.Can someone please take a pic of the layout (wkl) so i can remap it by hand?

There you go.
Only difference to stock layout: I have FN on rctl instead of ralt, due to needing altgr for german layout.

Offline crusader_alex

  • Posts: 34
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #280 on: Wed, 23 May 2018, 00:46:03 »
Guys i kinda ****ed something up on bootmapper and wiped the whole layout.Can someone please take a pic of the layout (wkl) so i can remap it by hand?

There you go.
Only difference to stock layout: I have FN on rctl instead of ralt, due to needing altgr for german layout.
Thank you but i fixed it last night.Apparently if you set it into bootloader mode and hit a key it will show you the corresponding position.



Online Jkush463

  • Posts: 2
  • Location: Aurora, IL
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #281 on: Fri, 25 May 2018, 13:12:55 »
Is there any way to get one of these? Or am i SOL

Offline shadowrealmwarez

  • Posts: 58
Re: [GB] MARS 8.0 (sorting and shipping)
« Reply #282 on: Fri, 25 May 2018, 13:18:17 »
Is there any way to get one of these? Or am i SOL

I think I've seen one or two pop up on reddit mechmarket , but that's about it.