Author Topic: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING  (Read 33044 times)

0 Members and 1 Guest are viewing this topic.

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
[GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« on: Sat, 10 March 2018, 09:41:33 »
Welcome to the official Group Buy for the Hyper 7 inspired H7 (173%) PCB.

The buy will run for 7 days or until 30 orders have been met - due to the size we have to hand solder these and any more will likely cause timescales to overrun. If we still have significant demand we will run a Round 3 as well using the R2 design.

The interest check showed a number of people would be interested in a CNC case design - so this is continuing with Xondat in parallel but no further news on that front at the moment.

I'll also share the files for the wooden floating case design once the GB concludes - I have dimensions for the R1 PCB but as things are changing for R2 I'll need to re-draft once I have the first PCBs on hand.

Changes from R1:
 - Moved to three rows on the top daughter-board to closer match the original vision.
 - Re-aligned mount points
 - Some slight routing changes to accommodate 'Function' and 'Mode' LEDs for those two layers
 - PCBs will be Blue in colour

Pricing as follows:

PCB production, components & soldering (still requires switches and LEDs) - 」120
Optional Steel laser cut plate with Mounting points (2 piece - one for the main board and one for the daughter board)  - 」100

****Packaging is included, but shipping will be requested once production has been completed and all boards are on hand.

Production is likely to take 4 - 6 weeks, and on this thread there will be a link to the plan and sequence of events which I'll update each week.

Email address must be your valid invoicing address for PayPal.

Entry form: https://docs.google.com/forms/d/1xoZ78QQRttF5ufj4Dkvv5CPBwcUvrkJhwjLfTNq_5gM

Pictures from R1: https://imgur.com/a/WYwi5

IC link: https://geekhack.org/index.php?topic=94282.msg2573429#msg2573429

Timeline: https://docs.google.com/spreadsheets/d/1KFGsbgjQ80K1KrMycLISsef8O6CjZUPpNPQmlKeo6Dg/edit?usp=sharing

Thanks again to 7Bit for the original theorised board and the Round 6 GB, and /u/Yiancar for being my wingman and PCB guru.

If you have any questions please post here :)

----------------------

11/03 - Now closed at 40 PCBs in total - R3 is being planned. Invoicing will begin tomorrow once I've finalised all details.

any questions just let me know!!

----------------------

12/03 - Invoices are now going out! All invoices issued - 38% paid

added KLE -

-----------------------
14/03 - 60% paid!!

-----------------------

16/03 - final day for invoice to be paid by 10pm Uk time - currently sat at 65% of payments complete. Final reminders have now been sent

-----------------------
17/03 - The good news all orders are in! About ten people dropped out of the GB or didn't complete the invoice, so technically we didn't make MOQ - but - I'm going to personally fund the rest (pls don't tell the missus as its her wedding dress fund!!).

As such the orders for both PCB's and Plates will be submitted and paid over the weekends.

Once these have been paid for I'll drop another update out to confirm and update the plan:

https://docs.google.com/spreadsheets/d/1KFGsbgjQ80K1KrMycLISsef8O6CjZUPpNPQmlKeo6Dg/edit?usp=sharing

Invoicing for shipping will begin once I've received the parts and tested them. the shipping will be done in a bulk job lot and all go out in one day.

If anyone is thinking of attending the MKUK Meetup in May, and I have all the parts by then (which I'm really hoping to!) then we can arrange a handover there :)

--------------------------------
28/03/2018 - PCBs are well into production at the moment, and Plates have just started. Work has also commenced on the revised QMK port for the new layout and pin position as well as the actual keymap as well. Plan has been updated.

« Last Edit: Sun, 22 July 2018, 02:40:49 by Jon_Flynn »

Offline Signature

  • master of puppers
  • * Moderator
  • Posts: 1638
  • Location: Sweden
  • wont say
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #1 on: Sat, 10 March 2018, 12:56:29 »
Approved
If you need any GB or classifieds post approved send me a PM here or on Discord Gus#1121

Offline futurecrime

  • Posts: 845
  • Location: London, England
  • Probably tired right now.
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #2 on: Sat, 10 March 2018, 14:55:23 »
I'm not gonna get in on this but I cannot wait to see some more H7 builds, with a Xondat case no less.  Gonna be all kinds of wonderful. GLWGB.

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #3 on: Sat, 10 March 2018, 14:59:27 »
I'm not gonna get in on this but I cannot wait to see some more H7 builds, with a Xondat case no less.  Gonna be all kinds of wonderful. GLWGB.
Thanks man :) I still want your ST!!

Xondat is literally looking at the case as we speak and Oblotzky has also kindly offered some renders as well - here痴 to hoping we can keep improving and iterating!!


Sent from my iPhone using Tapatalk

Offline ChrisSwires

  • Posts: 150
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #4 on: Sat, 10 March 2018, 15:38:23 »
Really not my format. But tbh. Basically way too awesome to miss out on.

I say not my format. I guess there's only a few people that have tried...

Offline ojrask

  • Posts: 354
  • juuh elikk舖
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #5 on: Sat, 10 March 2018, 16:46:47 »
For this, you probably need negative firmware layers just to find uses for all the keys. :D
Current:
    Ducky DK9008P [MX Blues] | WASD V2 TKL [MX Blues] | r63 (Satan 60% DIY) [Gateron Browns] | BananaSplit 60% [Gateron Greens] | UK78 [67g Zealios] | Infinity ErgoDox [MX Clears] | Pearl 40% [78g Zealios] | G81-3000
Coming up:
    DZ60/SKB60-WKL [100g MX Silent Blacks] | G81-3000 [Box Navies] Handwire
IC/GB:
    GMK Strogg | G81/80-3000 MX metal plate

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #6 on: Sat, 10 March 2018, 17:31:59 »
Really not my format. But tbh. Basically way too awesome to miss out on.

I say not my format. I guess there's only a few people that have tried...

Its only a tiny bit different, like 24u wider...

For this, you probably need negative firmware layers just to find uses for all the keys. :D


Ha - actually just over 9 layers to try and emulate all the original space-cadet functions...

Offline jdcarpe

  • * Curator
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #7 on: Sat, 10 March 2018, 18:59:21 »
Oh, I wish I could afford this. Too much going on right now, but I love large keyboards like this.
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #8 on: Sat, 10 March 2018, 19:30:55 »
Oh, I wish I could afford this. Too much going on right now, but I love large keyboards like this.

Not to worry man - I know how it is when you want to join all the projects!

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #9 on: Sat, 10 March 2018, 20:23:41 »
I'm off to bed now as its 2.30am, but its really close to hitting the 30 number (29 as I type) if there are any names on the list after I'll extend the numbers to whatever the total is when I wake up on Sunday :)

Thanks for making this happen folks!!!

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #10 on: Sun, 11 March 2018, 08:10:07 »
Now closed at 40 PCBs in total - R3 is being planned. Invoicing will begin tomorrow once I've finalised all details.

any questions just let me know!!

Jon

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 5220
  • Location: United Kingdom
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #11 on: Sun, 11 March 2018, 11:25:29 »
Damn! Yiancar has a lot of work to do :))

Hopefully don't mind me teasing this :-*


Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #12 on: Sun, 11 March 2018, 11:57:23 »
Damn! Yiancar has a lot of work to do :))

Hopefully don't mind me teasing this :-*

Show Image



Not at all - I'm hoping we will have some full on case designs soon!! Thanks again man :)

Offline pvd

  • Posts: 81
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #13 on: Sun, 11 March 2018, 12:58:28 »
Will this theoretical xondat case be compatible with the SS plate included in the GB? I ordered a plate,  but I知 wondering if that was a mistake

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #14 on: Sun, 11 March 2018, 13:05:49 »
Will this theoretical xondat case be compatible with the SS plate included in the GB? I ordered a plate,  but I知 wondering if that was a mistake

No, Xondats case would be top mounted I suspect, these plates are designed to keep the switches aligned in the floating model design.

If Xondats case does complete it will be a significant amount of time away and likely a large cost as well. Either way if you need to change your order you have about 15 hours till I start invoicing :)


Sent from my iPhone using Tapatalk

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #15 on: Mon, 12 March 2018, 06:43:21 »
All invoices have now been sent out. Drop me a note if you have any concerns / queries.

Jon

Offline clik_clak

  • Posts: 242
  • Location: SLC, UT
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #16 on: Mon, 12 March 2018, 13:24:24 »
Is there a keyboard editor with the key sizes by chance?

Additionally, is there any plans to come up with a GB to fill the keycaps? Trying to figure out what kits and how many of each to fill this board is making my head spin.

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #17 on: Mon, 12 March 2018, 15:43:51 »
Is there a keyboard editor with the key sizes by chance?

Additionally, is there any plans to come up with a GB to fill the keycaps? Trying to figure out what kits and how many of each to fill this board is making my head spin.
Yeah. I have a KlE file I can share. Gimme a couple of hours to get home and I値l post it up :)

In terms of keycaps I知 looking at a potential DCS run, and have asked 7bit to add the keycaps into his next round as well.

Some people have messaged me with plans to do vomit sets and otherwise - and one guy has already mocked up a full DSA set.


Sent from my iPhone using Tapatalk

Offline Sylvestyeo

  • Posts: 50
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #18 on: Mon, 12 March 2018, 18:16:21 »
Quick question, understand that the 2u keycaps don't have stabs and are actually double switches? Is this correct? this would mean we'd need custom keycaps for those as well?

Yeah i know this is a highly custom keyboard, just would like to check what are the parts required to get this keeb functioning. Thanks! :D

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #19 on: Mon, 12 March 2018, 18:18:13 »
Quick question, understand that the 2u keycaps don't have stabs and are actually double switches? Is this correct? this would mean we'd need custom keycaps for those as well?

Yeah i know this is a highly custom keyboard, just would like to check what are the parts required to get this keeb functioning. Thanks! :D

Correct they are 2u caps with double switches underneath called POS caps - SP sells blank 2u POS caps on PMK (at least they did not sure if they are still there) and you can also get them in DSA and DCS. I'm not sure about cherry profile

Offline clik_clak

  • Posts: 242
  • Location: SLC, UT
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #20 on: Mon, 12 March 2018, 18:21:32 »
Is there a keyboard editor with the key sizes by chance?

Additionally, is there any plans to come up with a GB to fill the keycaps? Trying to figure out what kits and how many of each to fill this board is making my head spin.
Yeah. I have a KlE file I can share. Gimme a couple of hours to get home and I値l post it up :)

In terms of keycaps I知 looking at a potential DCS run, and have asked 7bit to add the keycaps into his next round as well.

Some people have messaged me with plans to do vomit sets and otherwise - and one guy has already mocked up a full DSA set.

Sounds good! Can't wait to see the KLE! Making the keycaps as easy as possible will help a ton of people out I'm sure!

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #21 on: Mon, 12 March 2018, 18:35:05 »
Is there a keyboard editor with the key sizes by chance?

Additionally, is there any plans to come up with a GB to fill the keycaps? Trying to figure out what kits and how many of each to fill this board is making my head spin.
Yeah. I have a KlE file I can share. Gimme a couple of hours to get home and I値l post it up :)

In terms of keycaps I知 looking at a potential DCS run, and have asked 7bit to add the keycaps into his next round as well.

Some people have messaged me with plans to do vomit sets and otherwise - and one guy has already mocked up a full DSA set.

Sounds good! Can't wait to see the KLE! Making the keycaps as easy as possible will help a ton of people out I'm sure!


Just as I dug it out!!

Here is the KLE

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #22 on: Mon, 12 March 2018, 20:23:09 »
Quick question, understand that the 2u keycaps don't have stabs and are actually double switches? Is this correct? this would mean we'd need custom keycaps for those as well?

Yeah i know this is a highly custom keyboard, just would like to check what are the parts required to get this keeb functioning. Thanks! :D

I知 also conscious I forgot to mention that all the switches can be used as 1u as well. It痴 disabled for the leftmost switch on each 2u set on qmk but you could easily fill it full of 1u caps and edit the keymap


Sent from my iPhone using Tapatalk

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #23 on: Wed, 14 March 2018, 16:56:23 »
Just a quick update - about 60% of funds now received. Deadline is Friday for those still to pay :)

Offline BlindAssassin111

  • Posts: 843
  • Location: My Mind
  • I design keyboards and stuff.
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #24 on: Wed, 14 March 2018, 17:00:59 »
Dear god that is a massive ****ing keyboard...That makes my Omnikey look like a small form factor board...

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #25 on: Thu, 15 March 2018, 06:29:52 »
Dear god that is a massive ****ing keyboard...That makes my Omnikey look like a small form factor board...

It takes some getting used to and I have to remind myself of the Macro's on the top layer...

Offline unmuscular_michael

  • Posts: 44
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #26 on: Thu, 15 March 2018, 11:07:42 »
Paid this morning. No idea where I'll find a keycap set for it though :/

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #27 on: Fri, 16 March 2018, 13:15:23 »
So at the moment we have about 65% of invoices paid, and about 5% have dropped out. Just a reminder that the deadline for paying invoices is 10pm tonight UK time - thats about 4 hours from the posting of this message - I'll send another reminder out via email to the participants yet to complete their invoices shortly as well

all the best!!

Jon

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #28 on: Sat, 17 March 2018, 07:15:18 »
The good news all orders are in! About ten people dropped out of the GB or didn't complete the invoice, so technically we didn't make MOQ - but - I'm going to personally fund the rest (pls don't tell the missus as its her wedding dress fund!!).

As such the orders for both PCB's and Plates will be submitted and paid over the weekends.

Once these have been paid for I'll drop another update out to confirm and update the plan:

https://docs.google.com/spreadsheets/d/1KFGsbgjQ80K1KrMycLISsef8O6CjZUPpNPQmlKeo6Dg/edit?usp=sharing

Invoicing for shipping will begin once I've received the parts and tested them. the shipping will be done in a bulk job lot and all go out in one day.

If anyone is thinking of attending the MKUK Meetup in May, and I have all the parts by then (which I'm really hoping to!) then we can arrange a handover there :)

Offline helpful

  • Posts: 12
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #29 on: Fri, 23 March 2018, 22:32:29 »
Seeing this GB now, are the Keycaps going to be sold one day?  Or are there compatible keycaps set?


Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #31 on: Wed, 28 March 2018, 14:34:36 »
Seeing this GB now, are the Keycaps going to be sold one day?  Or are there compatible keycaps set?


Apologies, missed your post! I致e asked 7bit via PM if he is interested but no answer as yet.

That being said if there is no takers I知 thinking of running a compatible set in DCS profile potentially


Sent from my iPhone using Tapatalk

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #32 on: Wed, 28 March 2018, 14:35:22 »
I'd like to buy one. Is it too late to join?


I知 afraid so, but there may be a couple of extras at the end. I値l add you to my list.

Failing that there will be an R3 after this one has finished.

Jon


Sent from my iPhone using Tapatalk

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #33 on: Wed, 28 March 2018, 16:40:17 »
Just a quick update to say that the PCBs are well into production at the moment, and Plates have just started. Work has also commenced on the revised QMK port for the new layout and pin position as well as the actual keymap as well. Plan has been updated, but currently on track.

Offline ihalatch

  • Posts: 758
  • Location: Adelaide, Australia
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #34 on: Wed, 28 March 2018, 20:13:47 »
I'd like to buy one. Is it too late to join?


I知 afraid so, but there may be a couple of extras at the end. I値l add you to my list.

Failing that there will be an R3 after this one has finished.

Jon


Sent from my iPhone using Tapatalk

Thanks Jon, I somehow missed this one despite filling in the IC form :(

Offline UsualSuspectXXX

  • Posts: 3456
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #35 on: Wed, 28 March 2018, 20:19:40 »
I'd like to buy one. Is it too late to join?


I知 afraid so, but there may be a couple of extras at the end. I値l add you to my list.

Failing that there will be an R3 after this one has finished.

Jon


Sent from my iPhone using Tapatalk

I can't believe I missed this GB. I was waiting intently on the IC thread. Can you please add me to the extras list as well?

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #36 on: Wed, 28 March 2018, 23:20:39 »
I'd like to buy one. Is it too late to join?


I知 afraid so, but there may be a couple of extras at the end. I値l add you to my list.

Failing that there will be an R3 after this one has finished.

Jon


Sent from my iPhone using Tapatalk

I can't believe I missed this GB. I was waiting intently on the IC thread. Can you please add me to the extras list as well?

Yep. All added but it will go in order of those that have asked


Sent from my iPhone using Tapatalk

Offline UsualSuspectXXX

  • Posts: 3456
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #37 on: Fri, 30 March 2018, 06:49:00 »
I'd like to buy one. Is it too late to join?


I知 afraid so, but there may be a couple of extras at the end. I値l add you to my list.

Failing that there will be an R3 after this one has finished.

Jon


Sent from my iPhone using Tapatalk

I can't believe I missed this GB. I was waiting intently on the IC thread. Can you please add me to the extras list as well?

Yep. All added but it will go in order of those that have asked


Sent from my iPhone using Tapatalk

Sounds reasonable. Thank ya!

Offline RavenPanther

  • Posts: 84
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #38 on: Sun, 08 April 2018, 01:42:20 »
I'd like to buy one. Is it too late to join?


I知 afraid so, but there may be a couple of extras at the end. I値l add you to my list.

Failing that there will be an R3 after this one has finished.

Jon


Sent from my iPhone using Tapatalk

I can't believe I missed this GB. I was waiting intently on the IC thread. Can you please add me to the extras list as well?

Yep. All added but it will go in order of those that have asked


Sent from my iPhone using Tapatalk
Late to the party, you were even kind enough to email about it when this started and I somehow missed it. Could I get on that list, too?

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #39 on: Sun, 08 April 2018, 16:11:14 »
I'd like to buy one. Is it too late to join?


I知 afraid so, but there may be a couple of extras at the end. I値l add you to my list.

Failing that there will be an R3 after this one has finished.

Jon


Sent from my iPhone using Tapatalk

I can't believe I missed this GB. I was waiting intently on the IC thread. Can you please add me to the extras list as well?

Yep. All added but it will go in order of those that have asked


Sent from my iPhone using Tapatalk
Late to the party, you were even kind enough to email about it when this started and I somehow missed it. Could I get on that list, too?

Added you to the list!

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #40 on: Mon, 28 May 2018, 18:17:12 »
Just a quick update on this:

I知 finally back from wedding/honeymoon and have this weekend just got hosting the UK Leeds meetup out of the way :)

All the PCBs and plates are at mine now and are sorted and sat on my desk. It weighs a ton and I知 worried for my desks safety...

Next step is to clean the plates down as they are mild steel, so don稚 come cleaned from the factory, and once done I値l clearcoat for those that have asked.

The PCBs have all been joined together (mainboard to daughterboard) and are currently going through QC and programming.

We have a revised base qmk keymap installed, and Work is still underway by Bit-shifter to optimise my original keyset and make the changes to support the different rows from R1.

Next steps are to await delivery of the individual shipping boxes, clean up the plates and send out shipping invoices. Once half the invoices are paid, I値l ship those, then the second lot once all payments are completed. Shipping will be priced based on your actual weight and contents as a few people (looking at you Olivia!!) have some extra items being included.

I値l post another update prior to shipping invoices going out but I知 hoping I can start that process next weekend.

Jon


Sent from my iPhone using Tapatalk

Offline clik_clak

  • Posts: 242
  • Location: SLC, UT
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #41 on: Mon, 11 June 2018, 08:57:55 »
Any more updates? Been a couple weeks since we've heard from you.

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #42 on: Mon, 11 June 2018, 09:19:37 »
Any more updates? Been a couple weeks since we've heard from you.

The Custom boxes have finally been shipped and I知 about 25% of the way through cleaning up the plates etc. I had planned on sending an update out this weekend as I travel during the week for work. As soon as I致e got the plates ready (hopefully this weekend) and the boxes (hopefully Thursday looking at tracking) I can start the shipping invoices.

In parallel, the QMK files should be ready and added to the repo in the next few days too. Bit-shifter is just finishing up the much simplified keymap file to make it more manageable.

Apologies again for the delays in responding - been a few busy weeks in my personal life with wedding, holidays, running the Leeds meetup and Work - but I知 always happy to provide an update if anyone wants/ needs one :).

Offline UsualSuspectXXX

  • Posts: 3456
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #43 on: Sat, 21 July 2018, 20:57:35 »
Any word on extras? Doesn't look like there's been an update in quite a while.

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #44 on: Sun, 22 July 2018, 02:38:45 »
Any word on extras? Doesn't look like there's been an update in quite a while.

Everything is being shipped this week and next - its not looking likely for extras, but I've had a ton of interest so once these are all out an IC will be up for R3.

Most of my updates are to my fellow GB'ers by e-mail as I can't access GH from work etc, and it relies on me being at home to post here - I'll add the latest update in that went out yesterday tho underneath this post.

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #45 on: Sun, 22 July 2018, 02:40:29 »
The good:
  • ALL PCB's are packed!
    The Keymap is written and so are all the macros! - they just need functions attributed (more on that in a second).
    Those of you that just ordered PCB's - Invoices will be out within the next 36 hours for shipping.
    Those of you that ordered plates and PCBs - invoices will drip through over the next week as I pack your plate with your PCB orders.

The actions needed:
Folks, I need to finalise the keymap with bitshifter this week (the man is a legend)- so need as many of you as possible to complete two things:
Once finalised we will push this to QMK directly - so you'll be able to flash the final versions of the keymaps yourselves, relevant to your OS.

The getting better:
  • Whilst all the plates are drilled and clear-coated or primered, the paint has highlighted that my de-burring hasn't been great, so I'm tackling the afflicted plates with my new de-burring tool to make sure there are no sharp edges.
    This WILL be completed on Sunday - I've booked the whole day out with the wife to get this done.

The bad:
  • Pretty soon I'm not going to have a reason to send out these updates!!

The next steps:
  • Finish the plates - due by Sunday
    Invoice PCB only orders - due by sunday
    Invoice pcb and plate orders - due within the next week
    Arrange shipping - as soon as 50% of shipping invoices are paid
    Write a guide on enabling Unicode in Windows - for the next update
    Share my design for a wooden floating case - by next weekend
    Pull request the keymap to QMK - by next weekend

Final notes:
I know my timelines and estimates have been a little off - and I want to offer my sincerest apologies and thanks for you all bearing with me whilst we undertake this endeavour together :) I'm truly honoured to share this crazy contraption with you guys, and I hope you will love it as much as I do. I can't wait to see the masterpieces you'll all create.

As always, any queries, questions, address changes or otherwise - please ping me and let me know.

Offline ihalatch

  • Posts: 758
  • Location: Adelaide, Australia
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #46 on: Sun, 22 July 2018, 21:34:26 »
Any word on extras? Doesn't look like there's been an update in quite a while.

Everything is being shipped this week and next - its not looking likely for extras, but I've had a ton of interest so once these are all out an IC will be up for R3.

Most of my updates are to my fellow GB'ers by e-mail as I can't access GH from work etc, and it relies on me being at home to post here - I'll add the latest update in that went out yesterday tho underneath this post.

Can't wait for R3 GB. Please, make it happen.

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #47 on: Fri, 31 August 2018, 18:11:32 »
Just a final note to say that all packages have now been shipped and at this point only 4 are remaining to be delivered.

Bitshifter is hard at work on the QMK PR and that should be done soon which will be the final update.

Thanks again for everyone that joined and supported me through the endeavour - you are all amazing.

And round 3... maybe an announcement on a stream soon...


Sent from my iPhone using Tapatalk

Offline MFahim

  • Posts: 53
  • Location: Osakikamijima, Japan
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #48 on: Mon, 17 December 2018, 18:43:56 »
is this still alive?


Offline Zytyx

  • Posts: 23
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #50 on: Wed, 30 January 2019, 17:06:14 »
Also looking forward to r3 news if there is any

Offline mrpetrov

  • Posts: 524
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #51 on: Wed, 30 January 2019, 17:20:53 »
Thanks for opening up R3 Jae, I have submitted payment and am waiting on shipment email.

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #52 on: Wed, 30 January 2019, 17:21:31 »
Haha. R3 is pending. I知 talking with a vendor now to help run it.


Sent from my iPhone using Tapatalk Pro


Offline MFahim

  • Posts: 53
  • Location: Osakikamijima, Japan
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #54 on: Wed, 30 January 2019, 19:32:55 »
Will there be a case for this KB? I heard one was in the works from early posts.

Offline Boy Blue

  • Posts: 1
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #55 on: Fri, 01 March 2019, 09:43:25 »
I am 100% (173%) in for R3. just tell me where to sign up

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - Complete - R3 Soon....
« Reply #56 on: Fri, 01 March 2019, 09:49:06 »
Hey folks, I'm working with a vendor to bring R3 to you soon. It IS going to happen.

Timescales aren't fully clear as yet, but I'll confirm more soon by way of a new IC via the vendor

Offline mrpetrov

  • Posts: 524
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #57 on: Fri, 01 March 2019, 09:55:39 »
This keyboard needs to find its way into a sci-fi blockbuster.

Offline equalunique

  • Posts: 443
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - Complete - R3 Soon....
« Reply #58 on: Fri, 01 March 2019, 14:54:39 »
Hey folks, I'm working with a vendor to bring R3 to you soon. It IS going to happen.

Hey, that's excellent news!

Any chance this PCB would some headers for additional components? What If for example I want to add an RGB light strip, or connect something via I2C? Will extra pins on the micro controller(s) be made available in the design?

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #59 on: Sat, 02 March 2019, 03:54:23 »
Hey folks, I'm working with a vendor to bring R3 to you soon. It IS going to happen.

Hey, that's excellent news!

Any chance this PCB would some headers for additional components? What If for example I want to add an RGB light strip, or connect something via I2C? Will extra pins on the micro controller(s) be made available in the design?

It would mean some major changes (and probably price increases) to the design of the pcb. Right now the board works off a single controller, but there was only one pin left to enable LEDs on the top panel board.

I壇 have to remove those to give you an open pin for alternate use - or re work the board to have two controllers. I値l ask my PCB guru for some more assistance on that as I知 referencing an old conversation at the moment. Once the vendor pops up the IC for Rev3 we can start to take a look.


Sent from my iPhone using Tapatalk Pro

Offline tchalikias

  • Posts: 34
  • Location: Athens, Greece
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #60 on: Sat, 02 March 2019, 05:39:33 »
Wow, this looks incredible. With an alu retro case it would be like aomething out of the USCSS Nostromo! 🤘 I'm tempted...

Offline Anguloce

  • Posts: 5
  • Location: The Angles of Time
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #61 on: Fri, 15 March 2019, 10:23:59 »
I just learned of these monsters and am all the way on board. I'll watch for more news here because this is definitely something I need in my life.

(I wish this wasn't my first post ever, makes me look like some rando that showed up to drift off... No way, I keep looking at this thread every day and keep poking around the Internet for more info.)

You have at least one completely invested party in me for another round! Just shut up and take my money! :P Keep us updated and good luck.
« Last Edit: Mon, 18 March 2019, 13:47:59 by Anguloce »

Offline MFahim

  • Posts: 53
  • Location: Osakikamijima, Japan
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #62 on: Wed, 27 March 2019, 21:25:41 »
At this point I've been wondering whats caps would be good for itlol. I think there were comments on reddit about plans to make a keycap set specifically for this board [?!] If so will they run at the same time as the pcb GB?

Offline sanger_r

  • Posts: 5
  • Location: Milwaukee
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #63 on: Wed, 27 March 2019, 21:39:11 »
At this point I've been wondering whats caps would be good for itlol. I think there were comments on reddit about plans to make a keycap set specifically for this board [?!] If so will they run at the same time as the pcb GB?

PMK recently released a set specifically for it: https://pimpmykeyboard.com/dsa-ferrous-keyset/

Offline MFahim

  • Posts: 53
  • Location: Osakikamijima, Japan
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #64 on: Wed, 27 March 2019, 22:13:03 »
At this point I've been wondering whats caps would be good for itlol. I think there were comments on reddit about plans to make a keycap set specifically for this board [?!] If so will they run at the same time as the pcb GB?

PMK recently released a set specifically for it: https://pimpmykeyboard.com/dsa-ferrous-keyset/

Whoa I havent seen this. Thanks!  :D
« Last Edit: Wed, 27 March 2019, 22:14:50 by MFahim »

Offline Anguloce

  • Posts: 5
  • Location: The Angles of Time
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #65 on: Tue, 02 April 2019, 12:08:29 »
The PMKs look real sharp for sure. I've a feeling if I want to get real crazy or creative with the entire board it will be plenty of work tracking down keys.

Offline MFahim

  • Posts: 53
  • Location: Osakikamijima, Japan
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #66 on: Wed, 03 April 2019, 20:31:16 »
It would be nice if we had a full compatible keyset in a sculpted profile like Cherry or SA to go along with the GB. The only one we have is DSA, wonder if there could be plans even for a cheapish compatible pbt cherry set.

Offline Nixon

  • Posts: 29
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #67 on: Wed, 17 April 2019, 05:50:23 »
Will be putting in an order for the R3. Love this board so much.

Offline RETURNISO

  • Posts: 522
  • Location: [ NOR ] ISO
  • I do get excited about keyboard stuff..
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #68 on: Wed, 17 April 2019, 06:31:29 »
Will be putting in an order for the R3. Love this board so much.

+1 R3 :eek:


Offline MFahim

  • Posts: 53
  • Location: Osakikamijima, Japan
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #70 on: Fri, 19 April 2019, 09:10:10 »
Oh one more question, does the PCB support in switch LEDs; do we have to hand wire them?

Offline equalunique

  • Posts: 443
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #71 on: Fri, 19 April 2019, 09:59:11 »
Input Club has an IC going for something similar. They want to recreate the legendary "Space Cadet" keyboard with a possible "Input Club Symbolic Keyboard": https://kono.store/products/input-club-symbolic-keyboard

Sent from my LG-H918 using Tapatalk


Offline MFahim

  • Posts: 53
  • Location: Osakikamijima, Japan
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #72 on: Sat, 20 April 2019, 04:00:15 »
Input Club has an IC going for something similar. They want to recreate the legendary "Space Cadet" keyboard with a possible "Input Club Symbolic Keyboard": https://kono.store/products/input-club-symbolic-keyboard

Sent from my LG-H918 using Tapatalk

Looks cool but not nearly as big as the H7 lol

Offline Anguloce

  • Posts: 5
  • Location: The Angles of Time
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #73 on: Tue, 30 April 2019, 12:03:27 »
Were it not for this beauty I'd be hopping on the Cadet wagon for sure. Still hyped to hear about the H7 update, though. Not into LEDs myself by any stretch but I'll be darned if there aren't some brilliant designs coming from this monolithic keyboard.

Offline myetex

  • Posts: 2
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #74 on: Wed, 08 May 2019, 15:18:19 »
Looking forward to news about R3.

Offline Anguloce

  • Posts: 5
  • Location: The Angles of Time
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #75 on: Sun, 16 June 2019, 10:36:47 »
Is the vendor still working on it, or are we dead in the water?

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #76 on: Sun, 16 June 2019, 10:39:17 »
Is the vendor still working on it, or are we dead in the water?


Nope the vendor is still looking at this


Sent from my iPhone using Tapatalk Pro

Offline edduh

  • Posts: 3
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #77 on: Tue, 25 June 2019, 16:21:08 »
did you fill the people who dropped the order? I would be interested in one if you still have open slots.

Offline MFahim

  • Posts: 53
  • Location: Osakikamijima, Japan
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #78 on: Tue, 17 September 2019, 17:10:55 »
any updates as of yet?

Offline THX1138b

  • Posts: 23
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #79 on: Tue, 01 October 2019, 12:37:21 »
I'm also interested in this or some other battlestation kind of board if there are other projects like it (I actually want a normal-sized space bar though).

Offline jacqylfrost

  • Posts: 1
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #80 on: Sun, 13 October 2019, 04:44:03 »
Just registered for GeekHack to express my interest in this!

I'll try to keep an eye on this thread, but please do let me know if/when R3 is up, I'd definitely be interested. Especially if we have an option for a case.

Offline THX1138b

  • Posts: 23
Re:
« Reply #81 on: Sun, 13 October 2019, 06:08:56 »
Just registered for GeekHack to express my interest in this!

I'll try to keep an eye on this thread, but please do let me know if/when R3 is up, I'd definitely be interested. Especially if we have an option for a case.

Click on "NOTIFY" at the bottom of the thread and you'll get an e-mail each time someone responds; I think that would be easier than trying to remember to check.

Offline Rob27shred

  • Posts: 849
  • Location: Pittsburgh, PA
  • insane in the membrane
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #82 on: Sun, 13 October 2019, 09:24:39 »
I know this is a necro, but...


Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Thread Starter
  • Posts: 581
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #83 on: Sun, 13 October 2019, 09:31:04 »
Thanks folks for the interest. As mentioned before I致e handed off this to a vendor who will be running it at some point - Mechboards.co.uk




Sent from my iPhone using Tapatalk Pro

Offline u458625

  • Posts: 1
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #84 on: Thu, 14 November 2019, 15:50:14 »
May I please enter a request for the next production run. How do I do so?

Offline Mechboards

  • * Vendor
  • Posts: 257
  • Location: UK
  • Mechboards UK
    • Mechboards
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #85 on: Mon, 16 December 2019, 19:14:39 »
This will be necro'd/resurrected in the new year. Please add your email to keep up to date! I'll also keep this thread up to date.

https://groupbuys.mechboards.co.uk/shop/hyper-7-keyboard-r3-coming-soon/

Offline sanger_r

  • Posts: 5
  • Location: Milwaukee
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - SHIPPING INVOICING
« Reply #86 on: Wed, 12 February 2020, 11:59:55 »
Any word on a case for this one?