Author Topic: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING  (Read 3616 times)

0 Members and 1 Guest are viewing this topic.

Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
[GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« on: Sat, 10 March 2018, 09:41:33 »
Welcome to the official Group Buy for the Hyper 7 inspired H7 (173%) PCB.

The buy will run for 7 days or until 30 orders have been met - due to the size we have to hand solder these and any more will likely cause timescales to overrun. If we still have significant demand we will run a Round 3 as well using the R2 design.

The interest check showed a number of people would be interested in a CNC case design - so this is continuing with Xondat in parallel but no further news on that front at the moment.

I'll also share the files for the wooden floating case design once the GB concludes - I have dimensions for the R1 PCB but as things are changing for R2 I'll need to re-draft once I have the first PCBs on hand.

Changes from R1:
 - Moved to three rows on the top daughter-board to closer match the original vision.
 - Re-aligned mount points
 - Some slight routing changes to accommodate 'Function' and 'Mode' LEDs for those two layers
 - PCBs will be Blue in colour

Pricing as follows:

PCB production, components & soldering (still requires switches and LEDs) - 」120
Optional Steel laser cut plate with Mounting points (2 piece - one for the main board and one for the daughter board)  - 」100

****Packaging is included, but shipping will be requested once production has been completed and all boards are on hand.

Production is likely to take 4 - 6 weeks, and on this thread there will be a link to the plan and sequence of events which I'll update each week.

Email address must be your valid invoicing address for PayPal.

Entry form: https://docs.google.com/forms/d/1xoZ78QQRttF5ufj4Dkvv5CPBwcUvrkJhwjLfTNq_5gM

Pictures from R1: https://imgur.com/a/WYwi5

IC link: https://geekhack.org/index.php?topic=94282.msg2573429#msg2573429

Timeline: https://docs.google.com/spreadsheets/d/1KFGsbgjQ80K1KrMycLISsef8O6CjZUPpNPQmlKeo6Dg/edit?usp=sharing

Thanks again to 7Bit for the original theorised board and the Round 6 GB, and /u/Yiancar for being my wingman and PCB guru.

If you have any questions please post here :)

----------------------

11/03 - Now closed at 40 PCBs in total - R3 is being planned. Invoicing will begin tomorrow once I've finalised all details.

any questions just let me know!!

----------------------

12/03 - Invoices are now going out! All invoices issued - 38% paid

added KLE -

-----------------------
14/03 - 60% paid!!

-----------------------

16/03 - final day for invoice to be paid by 10pm Uk time - currently sat at 65% of payments complete. Final reminders have now been sent

-----------------------
17/03 - The good news all orders are in! About ten people dropped out of the GB or didn't complete the invoice, so technically we didn't make MOQ - but - I'm going to personally fund the rest (pls don't tell the missus as its her wedding dress fund!!).

As such the orders for both PCB's and Plates will be submitted and paid over the weekends.

Once these have been paid for I'll drop another update out to confirm and update the plan:

https://docs.google.com/spreadsheets/d/1KFGsbgjQ80K1KrMycLISsef8O6CjZUPpNPQmlKeo6Dg/edit?usp=sharing

Invoicing for shipping will begin once I've received the parts and tested them. the shipping will be done in a bulk job lot and all go out in one day.

If anyone is thinking of attending the MKUK Meetup in May, and I have all the parts by then (which I'm really hoping to!) then we can arrange a handover there :)

--------------------------------
28/03/2018 - PCBs are well into production at the moment, and Plates have just started. Work has also commenced on the revised QMK port for the new layout and pin position as well as the actual keymap as well. Plan has been updated.

« Last Edit: Wed, 28 March 2018, 16:39:48 by Jon_Flynn »

Offline Signature

  • master of puppers
  • * Moderator
  • Posts: 1152
  • Location: **** iMav
  • Rest in peace Timberman
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #1 on: Sat, 10 March 2018, 12:56:29 »
Approved

Offline futurecrime

  • Posts: 441
  • Location: London, England
  • Murder, she typed.
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #2 on: Sat, 10 March 2018, 14:55:23 »
I'm not gonna get in on this but I cannot wait to see some more H7 builds, with a Xondat case no less.  Gonna be all kinds of wonderful. GLWGB.
Flickr   Insta   Selling and buying

TGR Jane CE Matrix Abel  Lightsaver v3  LZ-St  Polycarb LZ-st TGR Tris Tricked out HHKB  TGR 910 Polycarb TGR 910

Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #3 on: Sat, 10 March 2018, 14:59:27 »
I'm not gonna get in on this but I cannot wait to see some more H7 builds, with a Xondat case no less.  Gonna be all kinds of wonderful. GLWGB.
Thanks man :) I still want your ST!!

Xondat is literally looking at the case as we speak and Oblotzky has also kindly offered some renders as well - here痴 to hoping we can keep improving and iterating!!


Sent from my iPhone using Tapatalk

Offline ChrisSwires

  • Posts: 60
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #4 on: Sat, 10 March 2018, 15:38:23 »
Really not my format. But tbh. Basically way too awesome to miss out on.

I say not my format. I guess there's only a few people that have tried...

Offline ojrask

  • Posts: 317
  • juuh elikk舖
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #5 on: Sat, 10 March 2018, 16:46:47 »
For this, you probably need negative firmware layers just to find uses for all the keys. :D
Current:
    Ducky DK9008P [MX Blues] | WASD V2 TKL [MX Blues] | r63 (Satan 60% DIY) [Gateron Browns] | BananaSplit 60% [Gateron Greens] | UK78 [67g Zealios] | Infinity ErgoDox [MX Clears] | Pearl 40% [78g Zealios] | G81-3000
Coming up:
    G81-3000 [Box Navies] Handwire
IC/GB:
    GMK Strogg | G81/80-3000 MX metal plate

Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #6 on: Sat, 10 March 2018, 17:31:59 »
Really not my format. But tbh. Basically way too awesome to miss out on.

I say not my format. I guess there's only a few people that have tried...

Its only a tiny bit different, like 24u wider...

For this, you probably need negative firmware layers just to find uses for all the keys. :D


Ha - actually just over 9 layers to try and emulate all the original space-cadet functions...

Offline jdcarpe

  • * Curator
  • Posts: 8856
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #7 on: Sat, 10 March 2018, 18:59:21 »
Oh, I wish I could afford this. Too much going on right now, but I love large keyboards like this.
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #8 on: Sat, 10 March 2018, 19:30:55 »
Oh, I wish I could afford this. Too much going on right now, but I love large keyboards like this.

Not to worry man - I know how it is when you want to join all the projects!

Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #9 on: Sat, 10 March 2018, 20:23:41 »
I'm off to bed now as its 2.30am, but its really close to hitting the 30 number (29 as I type) if there are any names on the list after I'll extend the numbers to whatever the total is when I wake up on Sunday :)

Thanks for making this happen folks!!!

Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #10 on: Sun, 11 March 2018, 08:10:07 »
Now closed at 40 PCBs in total - R3 is being planned. Invoicing will begin tomorrow once I've finalised all details.

any questions just let me know!!

Jon

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 4546
  • Location: United Kingdom
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #11 on: Sun, 11 March 2018, 11:25:29 »
Damn! Yiancar has a lot of work to do :))

Hopefully don't mind me teasing this :-*


Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #12 on: Sun, 11 March 2018, 11:57:23 »
Damn! Yiancar has a lot of work to do :))

Hopefully don't mind me teasing this :-*

Show Image



Not at all - I'm hoping we will have some full on case designs soon!! Thanks again man :)

Offline pvd

  • Posts: 73
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #13 on: Sun, 11 March 2018, 12:58:28 »
Will this theoretical xondat case be compatible with the SS plate included in the GB? I ordered a plate,  but I知 wondering if that was a mistake

Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2
« Reply #14 on: Sun, 11 March 2018, 13:05:49 »
Will this theoretical xondat case be compatible with the SS plate included in the GB? I ordered a plate,  but I知 wondering if that was a mistake

No, Xondats case would be top mounted I suspect, these plates are designed to keep the switches aligned in the floating model design.

If Xondats case does complete it will be a significant amount of time away and likely a large cost as well. Either way if you need to change your order you have about 15 hours till I start invoicing :)


Sent from my iPhone using Tapatalk

Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #15 on: Mon, 12 March 2018, 06:43:21 »
All invoices have now been sent out. Drop me a note if you have any concerns / queries.

Jon

Online clik_clak

  • Posts: 37
  • Location: SLC, UT
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #16 on: Mon, 12 March 2018, 13:24:24 »
Is there a keyboard editor with the key sizes by chance?

Additionally, is there any plans to come up with a GB to fill the keycaps? Trying to figure out what kits and how many of each to fill this board is making my head spin.

Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #17 on: Mon, 12 March 2018, 15:43:51 »
Is there a keyboard editor with the key sizes by chance?

Additionally, is there any plans to come up with a GB to fill the keycaps? Trying to figure out what kits and how many of each to fill this board is making my head spin.
Yeah. I have a KlE file I can share. Gimme a couple of hours to get home and I値l post it up :)

In terms of keycaps I知 looking at a potential DCS run, and have asked 7bit to add the keycaps into his next round as well.

Some people have messaged me with plans to do vomit sets and otherwise - and one guy has already mocked up a full DSA set.


Sent from my iPhone using Tapatalk

Offline Sylvestyeo

  • Posts: 47
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #18 on: Mon, 12 March 2018, 18:16:21 »
Quick question, understand that the 2u keycaps don't have stabs and are actually double switches? Is this correct? this would mean we'd need custom keycaps for those as well?

Yeah i know this is a highly custom keyboard, just would like to check what are the parts required to get this keeb functioning. Thanks! :D

Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #19 on: Mon, 12 March 2018, 18:18:13 »
Quick question, understand that the 2u keycaps don't have stabs and are actually double switches? Is this correct? this would mean we'd need custom keycaps for those as well?

Yeah i know this is a highly custom keyboard, just would like to check what are the parts required to get this keeb functioning. Thanks! :D

Correct they are 2u caps with double switches underneath called POS caps - SP sells blank 2u POS caps on PMK (at least they did not sure if they are still there) and you can also get them in DSA and DCS. I'm not sure about cherry profile

Online clik_clak

  • Posts: 37
  • Location: SLC, UT
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #20 on: Mon, 12 March 2018, 18:21:32 »
Is there a keyboard editor with the key sizes by chance?

Additionally, is there any plans to come up with a GB to fill the keycaps? Trying to figure out what kits and how many of each to fill this board is making my head spin.
Yeah. I have a KlE file I can share. Gimme a couple of hours to get home and I値l post it up :)

In terms of keycaps I知 looking at a potential DCS run, and have asked 7bit to add the keycaps into his next round as well.

Some people have messaged me with plans to do vomit sets and otherwise - and one guy has already mocked up a full DSA set.

Sounds good! Can't wait to see the KLE! Making the keycaps as easy as possible will help a ton of people out I'm sure!

Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #21 on: Mon, 12 March 2018, 18:35:05 »
Is there a keyboard editor with the key sizes by chance?

Additionally, is there any plans to come up with a GB to fill the keycaps? Trying to figure out what kits and how many of each to fill this board is making my head spin.
Yeah. I have a KlE file I can share. Gimme a couple of hours to get home and I値l post it up :)

In terms of keycaps I知 looking at a potential DCS run, and have asked 7bit to add the keycaps into his next round as well.

Some people have messaged me with plans to do vomit sets and otherwise - and one guy has already mocked up a full DSA set.

Sounds good! Can't wait to see the KLE! Making the keycaps as easy as possible will help a ton of people out I'm sure!


Just as I dug it out!!

Here is the KLE

Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #22 on: Mon, 12 March 2018, 20:23:09 »
Quick question, understand that the 2u keycaps don't have stabs and are actually double switches? Is this correct? this would mean we'd need custom keycaps for those as well?

Yeah i know this is a highly custom keyboard, just would like to check what are the parts required to get this keeb functioning. Thanks! :D

I知 also conscious I forgot to mention that all the switches can be used as 1u as well. It痴 disabled for the leftmost switch on each 2u set on qmk but you could easily fill it full of 1u caps and edit the keymap


Sent from my iPhone using Tapatalk

Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #23 on: Wed, 14 March 2018, 16:56:23 »
Just a quick update - about 60% of funds now received. Deadline is Friday for those still to pay :)

Online BlindAssassin111

  • Posts: 437
  • Location: My Mind
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #24 on: Wed, 14 March 2018, 17:00:59 »
Dear god that is a massive ****ing keyboard...That makes my Omnikey look like a small form factor board...

Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #25 on: Thu, 15 March 2018, 06:29:52 »
Dear god that is a massive ****ing keyboard...That makes my Omnikey look like a small form factor board...

It takes some getting used to and I have to remind myself of the Macro's on the top layer...

Offline unmuscular_michael

  • Posts: 44
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #26 on: Thu, 15 March 2018, 11:07:42 »
Paid this morning. No idea where I'll find a keycap set for it though :/

Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #27 on: Fri, 16 March 2018, 13:15:23 »
So at the moment we have about 65% of invoices paid, and about 5% have dropped out. Just a reminder that the deadline for paying invoices is 10pm tonight UK time - thats about 4 hours from the posting of this message - I'll send another reminder out via email to the participants yet to complete their invoices shortly as well

all the best!!

Jon

Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #28 on: Sat, 17 March 2018, 07:15:18 »
The good news all orders are in! About ten people dropped out of the GB or didn't complete the invoice, so technically we didn't make MOQ - but - I'm going to personally fund the rest (pls don't tell the missus as its her wedding dress fund!!).

As such the orders for both PCB's and Plates will be submitted and paid over the weekends.

Once these have been paid for I'll drop another update out to confirm and update the plan:

https://docs.google.com/spreadsheets/d/1KFGsbgjQ80K1KrMycLISsef8O6CjZUPpNPQmlKeo6Dg/edit?usp=sharing

Invoicing for shipping will begin once I've received the parts and tested them. the shipping will be done in a bulk job lot and all go out in one day.

If anyone is thinking of attending the MKUK Meetup in May, and I have all the parts by then (which I'm really hoping to!) then we can arrange a handover there :)

Offline helpful

  • Posts: 8
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #29 on: Fri, 23 March 2018, 22:32:29 »
Seeing this GB now, are the Keycaps going to be sold one day?  Or are there compatible keycaps set?


Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #31 on: Wed, 28 March 2018, 14:34:36 »
Seeing this GB now, are the Keycaps going to be sold one day?  Or are there compatible keycaps set?


Apologies, missed your post! I致e asked 7bit via PM if he is interested but no answer as yet.

That being said if there is no takers I知 thinking of running a compatible set in DCS profile potentially


Sent from my iPhone using Tapatalk

Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #32 on: Wed, 28 March 2018, 14:35:22 »
I'd like to buy one. Is it too late to join?


I知 afraid so, but there may be a couple of extras at the end. I値l add you to my list.

Failing that there will be an R3 after this one has finished.

Jon


Sent from my iPhone using Tapatalk

Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #33 on: Wed, 28 March 2018, 16:40:17 »
Just a quick update to say that the PCBs are well into production at the moment, and Plates have just started. Work has also commenced on the revised QMK port for the new layout and pin position as well as the actual keymap as well. Plan has been updated, but currently on track.

Offline ihalatch

  • Posts: 590
  • Location: Adelaide, Australia
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #34 on: Wed, 28 March 2018, 20:13:47 »
I'd like to buy one. Is it too late to join?


I知 afraid so, but there may be a couple of extras at the end. I値l add you to my list.

Failing that there will be an R3 after this one has finished.

Jon


Sent from my iPhone using Tapatalk

Thanks Jon, I somehow missed this one despite filling in the IC form :(

Offline UsualSuspectXXX

  • Posts: 3309
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #35 on: Wed, 28 March 2018, 20:19:40 »
I'd like to buy one. Is it too late to join?


I知 afraid so, but there may be a couple of extras at the end. I値l add you to my list.

Failing that there will be an R3 after this one has finished.

Jon


Sent from my iPhone using Tapatalk

I can't believe I missed this GB. I was waiting intently on the IC thread. Can you please add me to the extras list as well?

Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #36 on: Wed, 28 March 2018, 23:20:39 »
I'd like to buy one. Is it too late to join?


I知 afraid so, but there may be a couple of extras at the end. I値l add you to my list.

Failing that there will be an R3 after this one has finished.

Jon


Sent from my iPhone using Tapatalk

I can't believe I missed this GB. I was waiting intently on the IC thread. Can you please add me to the extras list as well?

Yep. All added but it will go in order of those that have asked


Sent from my iPhone using Tapatalk

Offline UsualSuspectXXX

  • Posts: 3309
  • Location: Persephone
  • (⌐■_■)⊃━☆゚.*・。゚
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #37 on: Fri, 30 March 2018, 06:49:00 »
I'd like to buy one. Is it too late to join?


I知 afraid so, but there may be a couple of extras at the end. I値l add you to my list.

Failing that there will be an R3 after this one has finished.

Jon


Sent from my iPhone using Tapatalk

I can't believe I missed this GB. I was waiting intently on the IC thread. Can you please add me to the extras list as well?

Yep. All added but it will go in order of those that have asked


Sent from my iPhone using Tapatalk

Sounds reasonable. Thank ya!

Online RavenPanther

  • Posts: 44
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #38 on: Sun, 08 April 2018, 01:42:20 »
I'd like to buy one. Is it too late to join?


I知 afraid so, but there may be a couple of extras at the end. I値l add you to my list.

Failing that there will be an R3 after this one has finished.

Jon


Sent from my iPhone using Tapatalk

I can't believe I missed this GB. I was waiting intently on the IC thread. Can you please add me to the extras list as well?

Yep. All added but it will go in order of those that have asked


Sent from my iPhone using Tapatalk
Late to the party, you were even kind enough to email about it when this started and I somehow missed it. Could I get on that list, too?

Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #39 on: Sun, 08 April 2018, 16:11:14 »
I'd like to buy one. Is it too late to join?


I知 afraid so, but there may be a couple of extras at the end. I値l add you to my list.

Failing that there will be an R3 after this one has finished.

Jon


Sent from my iPhone using Tapatalk

I can't believe I missed this GB. I was waiting intently on the IC thread. Can you please add me to the extras list as well?

Yep. All added but it will go in order of those that have asked


Sent from my iPhone using Tapatalk
Late to the party, you were even kind enough to email about it when this started and I somehow missed it. Could I get on that list, too?

Added you to the list!

Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #40 on: Mon, 28 May 2018, 18:17:12 »
Just a quick update on this:

I知 finally back from wedding/honeymoon and have this weekend just got hosting the UK Leeds meetup out of the way :)

All the PCBs and plates are at mine now and are sorted and sat on my desk. It weighs a ton and I知 worried for my desks safety...

Next step is to clean the plates down as they are mild steel, so don稚 come cleaned from the factory, and once done I値l clearcoat for those that have asked.

The PCBs have all been joined together (mainboard to daughterboard) and are currently going through QC and programming.

We have a revised base qmk keymap installed, and Work is still underway by Bit-shifter to optimise my original keyset and make the changes to support the different rows from R1.

Next steps are to await delivery of the individual shipping boxes, clean up the plates and send out shipping invoices. Once half the invoices are paid, I値l ship those, then the second lot once all payments are completed. Shipping will be priced based on your actual weight and contents as a few people (looking at you Olivia!!) have some extra items being included.

I値l post another update prior to shipping invoices going out but I知 hoping I can start that process next weekend.

Jon


Sent from my iPhone using Tapatalk

Online clik_clak

  • Posts: 37
  • Location: SLC, UT
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #41 on: Mon, 11 June 2018, 08:57:55 »
Any more updates? Been a couple weeks since we've heard from you.

Offline Jon_Flynn

  • Thread Starter
  • Posts: 221
Re: [GB] H7 (173% PCBs) (Hyper 7) R2 - INVOICING
« Reply #42 on: Mon, 11 June 2018, 09:19:37 »
Any more updates? Been a couple weeks since we've heard from you.

The Custom boxes have finally been shipped and I知 about 25% of the way through cleaning up the plates etc. I had planned on sending an update out this weekend as I travel during the week for work. As soon as I致e got the plates ready (hopefully this weekend) and the boxes (hopefully Thursday looking at tracking) I can start the shipping invoices.

In parallel, the QMK files should be ready and added to the repo in the next few days too. Bit-shifter is just finishing up the much simplified keymap file to make it more manageable.

Apologies again for the delays in responding - been a few busy weeks in my personal life with wedding, holidays, running the Leeds meetup and Work - but I知 always happy to provide an update if anyone wants/ needs one :).