Author Topic: Rama Works M60-A [SHIPPED] (Read 373766 times)

Aerizu · « **Reply #450 on:** Thu, 12 July 2018, 03:33:40 »

Does anyone knows what happened to GMK Heavy Industry?

MightyFineShindig · « **Reply #451 on:** Thu, 12 July 2018, 03:46:49 »

Quote from: Aerizu on Thu, 12 July 2018, 03:33:40

Does anyone knows what happened to GMK Heavy Industry?

Rama is working with EPBT now to make a Heavy Industry set.

Aerizu · « **Reply #452 on:** Thu, 12 July 2018, 05:06:05 »

Quote from: MightyFineShindig on Thu, 12 July 2018, 03:46:49

Quote from: Aerizu on Thu, 12 July 2018, 03:33:40
Does anyone knows what happened to GMK Heavy Industry?

Rama is working with EPBT now to make a Heavy Industry set.

It seems like so, but does that mean that the original GMK Heavy Industry would be abandoned?

Snappo · « **Reply #453 on:** Thu, 12 July 2018, 05:08:10 »

Quote from: Aerizu on Thu, 12 July 2018, 05:06:05

Quote from: MightyFineShindig on Thu, 12 July 2018, 03:46:49
Quote from: Aerizu on Thu, 12 July 2018, 03:33:40
Does anyone knows what happened to GMK Heavy Industry?

Rama is working with EPBT now to make a Heavy Industry set.

It seems like so, but does that mean that the original GMK Heavy Industry would be abandoned?

For now, yes. He might run it in the future, who knows.

asury · « **Reply #454 on:** Thu, 12 July 2018, 05:29:24 »

Quote from: Aerizu on Thu, 12 July 2018, 05:06:05

Quote from: MightyFineShindig on Thu, 12 July 2018, 03:46:49
Quote from: Aerizu on Thu, 12 July 2018, 03:33:40
Does anyone knows what happened to GMK Heavy Industry?

Rama is working with EPBT now to make a Heavy Industry set.

It seems like so, but does that mean that the original GMK Heavy Industry would be abandoned?

At least for now you can make a clone that might look close to it.

You'll need GMK Oblivion white alphas/GMK Honeywell alphas and Oblivion Monochrome modifier kit.
The yellow accent (fn, ctrl) if you want it, you can use yellow keys from GMK Serika later when it shipped.

KingRama · « **Reply #455 on:** Thu, 12 July 2018, 17:57:48 »

Quote from: asury on Thu, 12 July 2018, 05:29:24

Quote from: Aerizu on Thu, 12 July 2018, 05:06:05
Quote from: MightyFineShindig on Thu, 12 July 2018, 03:46:49
Quote from: Aerizu on Thu, 12 July 2018, 03:33:40
Does anyone knows what happened to GMK Heavy Industry?

Rama is working with EPBT now to make a Heavy Industry set.

It seems like so, but does that mean that the original GMK Heavy Industry would be abandoned?

At least for now you can make a clone that might look close to it.

You'll need GMK Oblivion white alphas/GMK Honeywell alphas and Oblivion Monochrome modifier kit.
The yellow accent (fn, ctrl) if you want it, you can use yellow keys from GMK Serika later when it shipped.

:O Hell yeah, that would look awesome!! Now to buy all those kits

But yeah, PBT version is underway, we're just awaiting a second sample with a few fixes

8ckerno · « **Reply #456 on:** Sun, 15 July 2018, 12:10:54 »

Will a switch puller be included?

RSC · « **Reply #457 on:** Sun, 15 July 2018, 15:01:53 »

Quote from: 8ckerno on Sun, 15 July 2018, 12:10:54

Will a switch puller be included?

This ^^
Please.

superdoedoe · « **Reply #458 on:** Mon, 16 July 2018, 00:33:04 »

Quote from: RSC on Sun, 15 July 2018, 15:01:53

Quote from: 8ckerno on Sun, 15 July 2018, 12:10:54
Will a switch puller be included?

This ^^
Please.

They cost like $3 just buy one beforehand.

Marutks · « **Reply #459 on:** Mon, 16 July 2018, 05:06:33 »

Quote from: superdoedoe on Mon, 16 July 2018, 00:33:04

They cost like $3 just buy one beforehand.

where? is it possible to buy one in the UK?

Darknight00z · « **Reply #460 on:** Mon, 16 July 2018, 05:28:39 »

£1.99 on mechbox.co.uk

KingRama · « **Reply #461 on:** Thu, 19 July 2018, 09:35:46 »

The packaging for the accessories has arrived in the warehouse!

More pics here: https://rama.works/projectupdates/2018/7/20/m60-a-seq-3

packman86 · « **Reply #462 on:** Thu, 19 July 2018, 09:52:05 »

Quote from: KingRama on Thu, 19 July 2018, 09:35:46

The packaging for the accessories has arrived in the warehouse!

Show Image

More pics here: https://rama.works/projectupdates/2018/7/20/m60-a-seq-3

Show Image

Looking good!

ARSLOCK · « **Reply #463 on:** Thu, 19 July 2018, 09:53:19 »

KAT looks pretty good!

+1 for including a switch puller

Kerasan · « **Reply #464 on:** Thu, 19 July 2018, 10:02:38 »

Quote from: KingRama on Thu, 19 July 2018, 09:35:46

The packaging for the accessories has arrived in the warehouse!

Show Image

More pics here: https://rama.works/projectupdates/2018/7/20/m60-a-seq-3

Show Image

gorgeous packaging.

maximum attention to detail.

KMK Labs.

ttot · « **Reply #465 on:** Thu, 19 July 2018, 12:49:58 »

Awesome!

And yeah +1 for switch puller.

Marutks · « **Reply #466 on:** Thu, 19 July 2018, 12:56:01 »

Quote from: ARSLOCK on Thu, 19 July 2018, 09:53:19

KAT looks pretty good!

Nice to see another alternative to SA profile keycaps. but... only black and white colours? dev/tty keyset looks so much better

Kerasan · « **Reply #467 on:** Thu, 19 July 2018, 13:50:25 »

Quote from: Marutks on Thu, 19 July 2018, 12:56:01

Quote from: ARSLOCK on Thu, 19 July 2018, 09:53:19
KAT looks pretty good!

Nice to see another alternative to SA profile keycaps. but... only black and white colours? dev/tty keyset looks so much better

there will be collaborations for other colors. This is a first classic demonstration set.

KMK Labs

Gacct · « **Reply #468 on:** Thu, 19 July 2018, 14:13:06 »

Rama will all of these individual component boxes be boxed within a box?

Kerasan · « **Reply #469 on:** Thu, 19 July 2018, 14:16:58 »

Quote from: Gacct on Thu, 19 July 2018, 14:13:06

Rama will all of these individual component boxes be boxed within a box?

KMK Labs

Gacct · « **Reply #470 on:** Thu, 19 July 2018, 14:19:57 »

Quote from: Kerasan on Thu, 19 July 2018, 14:16:58

Quote from: Gacct on Thu, 19 July 2018, 14:13:06
Rama will all of these individual component boxes be boxed within a box?

Show Image

KMK Labs

I saw that, just wasn't sure if the individual boxes would all be boxed in that or if that will just contain the main case.

Etherealsound · « **Reply #471 on:** Thu, 19 July 2018, 14:23:56 »

Man, it looks so good...Sept can't come soon enough

KingRama · « **Reply #472 on:** Thu, 19 July 2018, 19:05:45 »

Quote from: Gacct on Thu, 19 July 2018, 14:13:06

Rama will all of these individual component boxes be boxed within a box?

Hey, yeah! So the M60 enclosure is in that main box that Kerasan posted, then the accessories are encased in a foam insert which is placed above the main box

This will all be inside a main shipping box that we've custom made to fit everything snugly

Quote from: Etherealsound on Thu, 19 July 2018, 14:23:56

Man, it looks so good...Sept can't come soon enough

Getting closer! Will provide production updates as they come !

Quote from: ttot on Thu, 19 July 2018, 12:49:58

Awesome! And yeah +1 for switch puller.

I actually do want to design a more suited switch puller - I'll see what I can do, but am not one to rush things!

Quote from: Kerasan on Thu, 19 July 2018, 10:02:38

gorgeous packaging.

maximum attention to detail.

KMK Labs.

Thanks mate!! Still more packaging to come too

-----

In the meantime, we'll start beginning to package all the Starter Kits so they're ready to go

_PixelNinja · « **Reply #473 on:** Fri, 20 July 2018, 05:27:07 »

RAMA,

Seeing all of this unfold is very exiting, you guys have done amazing work and it's obvious a lot of passion has gone into this (as with all of your projects) — September can't come soon enough!

If I may ask one thing in regards to this photo:

My apologies if this is a silly question, but is there not a risk of the PVD coating getting scratched from rubbing against the packaging?

Also that second pic... Are you cheating on the Xiaomi Wiha with iFixit?

Kerasan · « **Reply #474 on:** Fri, 20 July 2018, 14:54:30 »

Quote from: _PixelNinja on Fri, 20 July 2018, 05:27:07

RAMA,

Seeing all of this unfold is very exiting, you guys have done amazing work and it's obvious a lot of passion has gone into this (as with all of your projects) — September can't come soon enough!

If I may ask one thing in regards to this photo:

Show Image

My apologies if this is a silly question, but is there not a risk of the PVD coating getting scratched from rubbing against the packaging?

Also that second pic... Are you cheating on the Xiaomi Wiha with iFixit? :p

if it were so fragile, nobody would wear watches with a PVD coating. however it is a legitimate question. from my experience with the pvd there is no such risk.
if you see any unboxing of Rama products, each piece is always wrapped in a protective membrane.

KMK Labs.

Etherealsound · « **Reply #475 on:** Fri, 20 July 2018, 15:30:11 »

Honestly, I don't know if I'm more excited for the M60a or for the new stabs in development.

KingRama · « **Reply #476 on:** Sat, 21 July 2018, 02:28:44 »

Quote from: _PixelNinja on Fri, 20 July 2018, 05:27:07

RAMA,

Seeing all of this unfold is very exiting, you guys have done amazing work and it's obvious a lot of passion has gone into this (as with all of your projects) — September can't come soon enough!

If I may ask one thing in regards to this photo:

Show Image

My apologies if this is a silly question, but is there not a risk of the PVD coating getting scratched from rubbing against the packaging?

Also that second pic... Are you cheating on the Xiaomi Wiha with iFixit? :p

Not a silly question! The hardness of the PVD coating is much higher than the plastic so it will not scratch it - however we will be doing some significant testing and throwing around to double check :P

Hahah! Of course not, the Wiha is still my favourite - using the iFixit for the bigger hex screw (Wiha didn't have the right size :-[ )

Quote from: Etherealsound on Fri, 20 July 2018, 15:30:11

Honestly, I don't know if I'm more excited for the M60a or for the new stabs in development.

Yeah, I'm super excited for the stabs too, super fun to mould new things :D Keen to test the next proto when it arrives so can quickly move to production!

_PixelNinja · « **Reply #477 on:** Sat, 21 July 2018, 15:34:42 »

Quote from: KingRama on Sat, 21 July 2018, 02:28:44

Not a silly question! The hardness of the PVD coating is much higher than the plastic so it will not scratch it - however we will be doing some significant testing and throwing around to double check

Gotcha!

Quote from: KingRama on Sat, 21 July 2018, 02:28:44

Hahah! Of course not, the Wiha is still my favourite - using the iFixit for the bigger hex screw (Wiha didn't have the right size )

Yeah — the 3mm hex is the one bit missing from the Wiha kit for me. I wish there was one included.

Quote from: KingRama on Sat, 21 July 2018, 02:28:44

Yeah, I'm super excited for the stabs too, super fun to mould new things Keen to test the next proto when it arrives so can quickly move to production!

I'm exited to see how your stabilizers turn out too. I'd love to put some in the M60!

marre259 · « **Reply #478 on:** Sat, 21 July 2018, 17:42:22 »

What's the timeline like for the stabs? Will I be able to put them in the M60 when it comes?

Etherealsound · « **Reply #479 on:** Sat, 21 July 2018, 18:03:24 »

Quote from: marre259 on Sat, 21 July 2018, 17:42:22

What's the timeline like for the stabs? Will I be able to put them in the M60 when it comes?

Not Rama, but I doubt it. He's still in development stage. Personally, I'd rather it come out a bit later and have it be closer to perfect. Hopefully pricing won't be too bad either. Would be nice to have an alternative to zeal stabs which are almost prohibitively expensive. Also, since the M60 is hotswappable, it shouldn't be too big of a deal to throw the stabs in when they do come out.

Vigrith · « **Reply #480 on:** Sat, 21 July 2018, 18:21:22 »

Can confirm I've spoken to Rama about the stabs and they won't be ready on time to be included with the M60.

KingRama · « **Reply #481 on:** Mon, 23 July 2018, 03:14:28 »

Quote from: Etherealsound on Sat, 21 July 2018, 18:03:24

Quote from: marre259 on Sat, 21 July 2018, 17:42:22
What's the timeline like for the stabs? Will I be able to put them in the M60 when it comes?

Not Rama, but I doubt it. He's still in development stage. Personally, I'd rather it come out a bit later and have it be closer to perfect. Hopefully pricing won't be too bad either. Would be nice to have an alternative to zeal stabs which are almost prohibitively expensive. Also, since the M60 is hotswappable, it shouldn't be too big of a deal to throw the stabs in when they do come out.

Yep, all correct there! Development will be a little longer on the stabs so we won't meet it in time for the M60-A but it is super easy to swap out new ones when the time comes

Getting closer to ship date! Cannot wait to see peoples desk setups

Aerizu · « **Reply #482 on:** Mon, 23 July 2018, 03:37:56 »

Quote from: KingRama on Mon, 23 July 2018, 03:14:28

Quote from: Etherealsound on Sat, 21 July 2018, 18:03:24
Quote from: marre259 on Sat, 21 July 2018, 17:42:22
What's the timeline like for the stabs? Will I be able to put them in the M60 when it comes?

Not Rama, but I doubt it. He's still in development stage. Personally, I'd rather it come out a bit later and have it be closer to perfect. Hopefully pricing won't be too bad either. Would be nice to have an alternative to zeal stabs which are almost prohibitively expensive. Also, since the M60 is hotswappable, it shouldn't be too big of a deal to throw the stabs in when they do come out.

Yep, all correct there! Development will be a little longer on the stabs so we won't meet it in time for the M60-A but it is super easy to swap out new ones when the time comes

Getting closer to ship date! Cannot wait to see peoples desk setups
Show Image

Cool looking deskmat. What is it? :D

Kerasan · « **Reply #483 on:** Mon, 23 July 2018, 03:39:53 »

Quote from: KingRama on Mon, 23 July 2018, 03:14:28

Quote from: Etherealsound on Sat, 21 July 2018, 18:03:24
Quote from: marre259 on Sat, 21 July 2018, 17:42:22
What's the timeline like for the stabs? Will I be able to put them in the M60 when it comes?

Not Rama, but I doubt it. He's still in development stage. Personally, I'd rather it come out a bit later and have it be closer to perfect. Hopefully pricing won't be too bad either. Would be nice to have an alternative to zeal stabs which are almost prohibitively expensive. Also, since the M60 is hotswappable, it shouldn't be too big of a deal to throw the stabs in when they do come out.

Yep, all correct there! Development will be a little longer on the stabs so we won't meet it in time for the M60-A but it is super easy to swap out new ones when the time comes

Getting closer to ship date! Cannot wait to see peoples desk setups
Show Image

I need that mat..... Now :p

KMK Labs.

befbef · « **Reply #484 on:** Mon, 23 July 2018, 04:24:57 »

I've seen some M65-A deskmats. Where did you buy them? Will there be a M60-A mat?

KingRama · « **Reply #485 on:** Mon, 23 July 2018, 04:30:18 »

Quote from: Aerizu on Mon, 23 July 2018, 03:37:56

Cool looking deskmat. What is it?

It's our new deskmat that we'll be releasing from stock, just awaiting them to arrive!

_PixelNinja · « **Reply #486 on:** Mon, 23 July 2018, 04:33:09 »

Will there be color options? You teased a grey variant in previous pictures.

Aerizu · « **Reply #487 on:** Mon, 23 July 2018, 05:18:14 »

Quote from: KingRama on Mon, 23 July 2018, 04:30:18

Quote from: Aerizu on Mon, 23 July 2018, 03:37:56
Cool looking deskmat. What is it?

It's our new deskmat that we'll be releasing from stock, just awaiting them to arrive!

Neat! I can't wait to own one

KingRama · « **Reply #488 on:** Mon, 23 July 2018, 05:33:18 »

Quote from: _PixelNinja on Mon, 23 July 2018, 04:33:09

Will there be color options? You teased a grey variant in previous pictures.

For now it will just be the Gray variant

Kerasan · « **Reply #489 on:** Mon, 23 July 2018, 05:40:21 »

I'll wait for the yellow one. It's really a nice yellow

KMK Labs.

Cas · « **Reply #490 on:** Mon, 23 July 2018, 16:45:53 »

love the yellow

redleaf · « **Reply #491 on:** Tue, 24 July 2018, 02:06:38 »

I can't wait for it to ship.

l3nnys · « **Reply #492 on:** Tue, 24 July 2018, 02:33:50 »

There will be extras available?

Digging to buy a second color

marre259 · « **Reply #493 on:** Tue, 24 July 2018, 03:27:05 »

Quote from: l3nnys on Tue, 24 July 2018, 02:33:50

There will be extras available?

Digging to buy a second color

Just fill this out http://m60.iwantrama.works and rama will invoice you when someone drops out.

novelty · « **Reply #494 on:** Tue, 24 July 2018, 20:23:18 »

Are there going to be any M60-A extra units available? Maybe some b-stock?

r0b1n4sale · « **Reply #495 on:** Wed, 25 July 2018, 05:57:49 »

A usb-c to usb-c cable would be lovely for mbp users.

ptiede · « **Reply #496 on:** Wed, 25 July 2018, 06:58:33 »

Quote from: r0b1n4sale on Wed, 25 July 2018, 05:57:49

A usb-c to usb-c cable would be lovely for mbp users.

I don't think the board supports c to c cables.

voight-kampff · « **Reply #497 on:** Wed, 25 July 2018, 07:23:32 »

Quote from: ptiede on Wed, 25 July 2018, 06:58:33

Quote from: r0b1n4sale on Wed, 25 July 2018, 05:57:49
A usb-c to usb-c cable would be lovely for mbp users.
I don't think the board supports c to c cables.

Why so?. The keyboard has an usb-c port. That is all what is needed. And of course the usb-c usb-c
cable

Sent from my MIX using Tapatalk

ptiede · « **Reply #498 on:** Wed, 25 July 2018, 09:13:36 »

Quote from: voight-kampff on Wed, 25 July 2018, 07:23:32

Quote from: ptiede on Wed, 25 July 2018, 06:58:33
Quote from: r0b1n4sale on Wed, 25 July 2018, 05:57:49
A usb-c to usb-c cable would be lovely for mbp users.
I don't think the board supports c to c cables.
Why so?. The keyboard has an usb-c port. That is all what is needed. And of course the usb-c usb-c
cable

Sent from my MIX using Tapatalk

I could be wrong but I believe atmega32u4 chips don't support USB c to USB c connections since they solely use USB 3.1. So the pcb won't recognize that port when plugged into a computer.

voight-kampff · « **Reply #499 on:** Wed, 25 July 2018, 09:43:14 »

Quote from: ptiede on Wed, 25 July 2018, 09:13:36

Quote from: voight-kampff on Wed, 25 July 2018, 07:23:32
Quote from: ptiede on Wed, 25 July 2018, 06:58:33
Quote from: r0b1n4sale on Wed, 25 July 2018, 05:57:49
A usb-c to usb-c cable would be lovely for mbp users.
I don't think the board supports c to c cables.
Why so?. The keyboard has an usb-c port. That is all what is needed. And of course the usb-c usb-c
cable

Sent from my MIX using Tapatalk
I could be wrong but I believe atmega32u4 chips don't support USB c to USB c connections since they solely use USB 3.1. So the pcb won't recognize that port when plugged into a computer.

So far as I know the usb - A and C port size and form is usb-version agnostic, it depends what wireing the cable has. So usb 2.0 or 3.0 cables can exist in a form of usb-c.
But I might be wrong, or I just don't get the problem you are referring to.

Sent from my MIX using Tapatalk

News:

Author Topic: Rama Works M60-A [SHIPPED] (Read 373766 times)