Author Topic: [GB] SKB75, SKB65 & SKB60 (ALL PARTS ARRIVED!)  (Read 121415 times)

zzzaacchh, NonDisc902 and 1 Guest are viewing this topic.

Offline PlastikSchnittstelle

  • Thread Starter
  • Posts: 418
  • Location: Germany, FFM
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #700 on: Sat, 15 December 2018, 10:27:17 »
Just checking in, February still the goal? Also an updated orders list was mentioned a few weeks back, would be great to let everyone verify their orders. :)

Yes, February is still the goal.
Here I attached the updated order list as pdf again.
If for some reason there are still some mistakes - no problem, there are still quite a few extras left from each version, so I can manage if I got something wrong.

Since there is not much for me to do now other then waiting, I'll keep it quiet for a while.

Also:
Some of you had asked me for a custom plate. I made quite a few already, some interesting ones, already three alps plates, for example. So if I haven't made this clear by now: If you want a custom plate, just pm me, let me know what you want and you'll get a DXF with your custom plate from me.

Offline anfledd

  • Posts: 34
  • Location: US-CO
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #701 on: Sat, 15 December 2018, 12:14:32 »
Looks good, looking forward to February!

Offline RETURNISO

  • Posts: 413
  • Location: [ NOR ] ISO
  • I do get excited about keyboard stuff..
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #702 on: Sat, 15 December 2018, 13:04:55 »
Plastik forever! :)

Offline rondg

  • Posts: 305
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #703 on: Sat, 15 December 2018, 14:56:52 »
Just checking in, February still the goal? Also an updated orders list was mentioned a few weeks back, would be great to let everyone verify their orders. :)

Yes, February is still the goal.
Here I attached the updated order list as pdf again.
If for some reason there are still some mistakes - no problem, there are still quite a few extras left from each version, so I can manage if I got something wrong.

Since there is not much for me to do now other then waiting, I'll keep it quiet for a while.

Also:
Some of you had asked me for a custom plate. I made quite a few already, some interesting ones, already three alps plates, for example. So if I haven't made this clear by now: If you want a custom plate, just pm me, let me know what you want and you'll get a DXF with your custom plate from me.

I'm not on the list...  :(

Offline PlastikSchnittstelle

  • Thread Starter
  • Posts: 418
  • Location: Germany, FFM
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #704 on: Sat, 15 December 2018, 15:10:19 »
yep, I got you, you joined just very recently, so that's why I haven't moved your name to the spreadsheet that I made for public export. so don't worry, I got you, you paid your SKB75, all fine.

Offline rondg

  • Posts: 305
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #705 on: Sat, 15 December 2018, 15:14:46 »
yep, I got you, you joined just very recently, so that's why I haven't moved your name to the spreadsheet that I made for public export. so don't worry, I got you, you paid your SKB75, all fine.

Ok. Thanks! ;D

Offline Zytyx

  • Posts: 21
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #706 on: Mon, 07 January 2019, 15:51:23 »
I've had this concept sitting around my head for a bit now, so I'm throwing it out there in case anyone else has thought of something similar. Given the way the plate is mounted in the case, how hard would be to use longer bolts, shorter spacers, washers, and o rings to sandwich the plate between them?
« Last Edit: Mon, 07 January 2019, 16:49:46 by Zytyx »

Offline PlastikSchnittstelle

  • Thread Starter
  • Posts: 418
  • Location: Germany, FFM
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #707 on: Tue, 08 January 2019, 04:15:55 »
That's not hard at all. Being able to use some kind of dampeners like orings is part of the whole idea. Was already mentioned a while ago. here as well.
something like this:
210167-0 210169-1
« Last Edit: Tue, 08 January 2019, 04:25:52 by PlastikSchnittstelle »

Offline Coloneljesus

  • Posts: 24
  • Location: Switzerland
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #708 on: Tue, 08 January 2019, 15:15:05 »
Good idea, haven't thought of that!

You can also find them on AliExpress when you search for "damper stand off". We would need size M3, correct? How long would they need to be?

Offline PlastikSchnittstelle

  • Thread Starter
  • Posts: 418
  • Location: Germany, FFM
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #709 on: Fri, 11 January 2019, 05:38:28 »
exactly the ones from the secon picture would fit. yes all M3. length 7mm woul be optimal, but 6mm length is ok as well (caps would't sink in that deep but still deeper than usual).
here are two sources for europe/germany: source one, source two. those would require you to use shorter screws than the ones that I'll include (M3x12). you'd need M3x4 or M3x5 (source option).
generally you can find these and similar kind of dampeners when you google for RC and drone accessories. there dampeners (usually M3 as well) are used to secure the controller boards. o-rings are probably the cheapest option.
« Last Edit: Fri, 11 January 2019, 06:11:43 by PlastikSchnittstelle »

Offline menuhin

  • Posts: 998
  • Location: Germany
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #710 on: Fri, 11 January 2019, 05:57:42 »
That's not hard at all. Being able to use some kind of dampeners like orings is part of the whole idea. Was already mentioned a while ago. here as well.
something like this:
(Attachment Link) (Attachment Link)

It is nice to have such a "gasket" keyboard DIY guide for the SKB keyboards  :thumb:
Looking forward to compare it "gasketed" versus "stock".
Wishlist: 1) hotswap boards for MX and for Alps; 2) Alps64; 3) Universal Teensy convertor; 3) Quack & Split Planck; 4) Solid cases like TX
More
Wishful-list: 1) HASU BT battery lasts a year; 2) ABS Shine-proof/PBT DoubleShot spherical; 3) We order from keyboard-layout-editor.com; 4) Endgame
IBM M13 black
IBM SpaceSaver II
IBM KPD8923 Trackpoint
Choc mini Gateron black
PLUM 84 'Topre-clone' 55g Korean dome
HHKB Pro 2 HasuBT
[typing slowly at ~80WPM, in love with Emacs, and growing in Lisp]

Online ReDsNoTDeAd

  • Posts: 301
  • Location: Alberta, Canada
  • using keeb funds to make 3d printed gfs by 2022
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #711 on: Wed, 16 January 2019, 08:55:47 »
What switches does everyone plan to put in this? I'm thinking holy pandas or lubed vintage blacks...

Offline menuhin

  • Posts: 998
  • Location: Germany
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #712 on: Wed, 16 January 2019, 09:39:48 »
What switches does everyone plan to put in this? I'm thinking holy pandas or lubed vintage blacks...

I'm a linear guy, so probably some lubed filmed vintage blacks, or retooled blacks, or even some Gateron blacks or yellows or clears if I managed to get a hotswap PCB.

Holy Pandas, call me saying out of jealousy cuz I missed the MD, are mostly and mainly a curiosity thing anyway.
My tactile holy grail, that the Holy Pandas and the Halo True want to mimic is Topre, something I'm typing on right now. The next thing close to Topre is SKCM browns before everyone is talking and making their own Holy Pandas, Outemu/Zeal/Gsus/KBDfans - I hope the mechanical switch market in 2019 won't be this boring in Q234.
Wishlist: 1) hotswap boards for MX and for Alps; 2) Alps64; 3) Universal Teensy convertor; 3) Quack & Split Planck; 4) Solid cases like TX
More
Wishful-list: 1) HASU BT battery lasts a year; 2) ABS Shine-proof/PBT DoubleShot spherical; 3) We order from keyboard-layout-editor.com; 4) Endgame
IBM M13 black
IBM SpaceSaver II
IBM KPD8923 Trackpoint
Choc mini Gateron black
PLUM 84 'Topre-clone' 55g Korean dome
HHKB Pro 2 HasuBT
[typing slowly at ~80WPM, in love with Emacs, and growing in Lisp]

Offline macken

  • Posts: 68
  • Location: Finland
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #713 on: Wed, 16 January 2019, 09:40:35 »
What switches does everyone plan to put in this? I'm thinking holy pandas or lubed vintage blacks...

I am gonna do the new version of box navy combined with SA caps.

Online ballinboyz

  • Posts: 5
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #714 on: Wed, 16 January 2019, 09:42:25 »
What switches does everyone plan to put in this? I'm thinking holy pandas or lubed vintage blacks...

Healios for my SKB65. Figure it could go well with the stiff steel plate.

Offline SteffeMK

  • Posts: 46
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #715 on: Wed, 16 January 2019, 13:17:33 »
I don't know if this has been asked before. But can I use a usb-c pcb with this?

Offline catamscott

  • Posts: 90
  • Location: Oregon
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #716 on: Wed, 16 January 2019, 17:22:37 »
What switches does everyone plan to put in this? I'm thinking holy pandas or lubed vintage blacks...

been thinking about what to put in this for a while now lol. was planning on putting in some lubed linear mod-h switches, but am now leaning towards mx zilents. but who knows, i've also got cream switches and red pandas/halo trues on the way  :eek:

Offline ojrask

  • Posts: 351
  • juuh elikkäs
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #717 on: Wed, 16 January 2019, 22:23:26 »
What switches does everyone plan to put in this? I'm thinking holy pandas or lubed vintage blacks...

The first plate and PCB will get some 100g silent MX Blacks, second plate and PCB will probably be 78g Zealios.
Current:
    Ducky DK9008P [MX Blues] | WASD V2 TKL [MX Blues] | r63 (Satan 60% DIY) [Gateron Browns] | BananaSplit 60% [Gateron Greens] | UK78 [67g Zealios] | Infinity ErgoDox [MX Clears] | Pearl 40% [78g Zealios] | G81-3000
Coming up:
    DZ60/SKB60-WKL [100g MX Silent Blacks] | G81-3000 [Box Navies] Handwire
IC/GB:
    GMK Strogg | G81/80-3000 MX metal plate

Online laserbeamspewpew

  • Posts: 135
  • Location: Brooklyn
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #718 on: Thu, 17 January 2019, 08:31:31 »
V2 zilents. I think the softer bottom out would work particularly well with the hard steel plate.

Offline PlastikSchnittstelle

  • Thread Starter
  • Posts: 418
  • Location: Germany, FFM
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #719 on: Thu, 17 January 2019, 10:25:16 »
I don't know if this has been asked before. But can I use a usb-c pcb with this?

no problem, if you dig into this thread you'll find a post where I bought three common usb-c cables from amazon and tested them with the case in order to make sure there are no issues.

Offline menuhin

  • Posts: 998
  • Location: Germany
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #720 on: Thu, 17 January 2019, 11:10:00 »
V2 zilents. I think the softer bottom out would work particularly well with the hard steel plate.

I may actually try some silented linear switches too!
Wishlist: 1) hotswap boards for MX and for Alps; 2) Alps64; 3) Universal Teensy convertor; 3) Quack & Split Planck; 4) Solid cases like TX
More
Wishful-list: 1) HASU BT battery lasts a year; 2) ABS Shine-proof/PBT DoubleShot spherical; 3) We order from keyboard-layout-editor.com; 4) Endgame
IBM M13 black
IBM SpaceSaver II
IBM KPD8923 Trackpoint
Choc mini Gateron black
PLUM 84 'Topre-clone' 55g Korean dome
HHKB Pro 2 HasuBT
[typing slowly at ~80WPM, in love with Emacs, and growing in Lisp]

Offline SteffeMK

  • Posts: 46
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #721 on: Thu, 17 January 2019, 11:23:43 »
I don't know if this has been asked before. But can I use a usb-c pcb with this?

no problem, if you dig into this thread you'll find a post where I bought three common usb-c cables from amazon and tested them with the case in order to make sure there are no issues.
Okay, thanks!

Skickat från min ONEPLUS A6013 via Tapatalk


Offline Coloneljesus

  • Posts: 24
  • Location: Switzerland
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #722 on: Thu, 17 January 2019, 13:24:42 »
Unsure. I have a bag of V1 Zilents but I may change my mind and try out some BOX switches or something.

Offline Soft_Sama

  • Posts: 2
  • Location: New York, NY
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #723 on: Thu, 17 January 2019, 13:50:06 »
What switches does everyone plan to put in this? I'm thinking holy pandas or lubed vintage blacks...

Bringing this board to school so I'm probably going to use the Aliaz I have on hand or swap the stems with Silent Sky

Offline Coloneljesus

  • Posts: 24
  • Location: Switzerland
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #724 on: Fri, 18 January 2019, 14:16:13 »
I forget. Does the plate support switch opening?

Offline Starston3

  • Posts: 186
  • Location: Bay Area
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #725 on: Fri, 18 January 2019, 14:27:11 »
I forget. Does the plate support switch opening?

It does not.

Offline PlastikSchnittstelle

  • Thread Starter
  • Posts: 418
  • Location: Germany, FFM
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #726 on: Fri, 18 January 2019, 16:41:46 »
I forget. Does the plate support switch opening?

you mean switch top removal?
no it doesn't, just standard cutouts.
I explained in the beginning why I prefer that.
make your switches perfect before you start building, or get a PCB witch hot-swap sockets.
« Last Edit: Fri, 18 January 2019, 16:43:38 by PlastikSchnittstelle »

Offline macken

  • Posts: 68
  • Location: Finland
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #727 on: Sun, 20 January 2019, 09:11:05 »
Any update on the progress?

Sill on time for finished production and delivery in february?

Offline PlastikSchnittstelle

  • Thread Starter
  • Posts: 418
  • Location: Germany, FFM
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #728 on: Mon, 21 January 2019, 07:48:37 »
Any update on the progress?

Sill on time for finished production and delivery in february?

that's what I assume. But I won't bother until mid february. If I don't have the parts by then or a more specific time, I'll call them and ask.

Offline booleanjulien

  • Posts: 93
  • Location: Boston, MA
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #729 on: Mon, 21 January 2019, 11:22:29 »
What switches does everyone plan to put in this? I'm thinking holy pandas or lubed vintage blacks...

I am gonna do the new version of box navy combined with SA caps.

Do you just mean fixed stems, or are they reworked in other ways? If the latter, where can I find more info?

Offline macken

  • Posts: 68
  • Location: Finland
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #730 on: Mon, 21 January 2019, 11:28:18 »
What switches does everyone plan to put in this? I'm thinking holy pandas or lubed vintage blacks...

I am gonna do the new version of box navy combined with SA caps.

Do you just mean fixed stems, or are they reworked in other ways? If the latter, where can I find more info?

Just fixed stems.

Offline Gamatatsu

  • Posts: 9
  • Location: Chicago
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #731 on: Mon, 21 January 2019, 21:07:11 »
I payed for the 75% and I'm not on the list :(

Offline tectonicplate

  • Posts: 28
  • Location: Earth
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #732 on: Tue, 22 January 2019, 00:31:05 »
What switches does everyone plan to put in this? I'm thinking holy pandas or lubed vintage blacks...

I'm a linear guy, so probably some lubed filmed vintage blacks, or retooled blacks, or even some Gateron blacks or yellows or clears if I managed to get a hotswap PCB.

Holy Pandas, call me saying out of jealousy cuz I missed the MD, are mostly and mainly a curiosity thing anyway.
My tactile holy grail, that the Holy Pandas and the Halo True want to mimic is Topre, something I'm typing on right now. The next thing close to Topre is SKCM browns before everyone is talking and making their own Holy Pandas, Outemu/Zeal/Gsus/KBDfans - I hope the mechanical switch market in 2019 won't be this boring in Q234.

Hako Violets. I have some lubed with Tribosys 3204 in another board that feel pretty good, but I'm thinking a few layers of RO-59 might be worth the effort.

Offline kim-kim

  • Posts: 42
  • Location: -6.1751, 106.8650
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #733 on: Thu, 31 January 2019, 20:17:43 »
today is February (at least on my place), so any updates on production?
XD75 - GMK Terminal - Gatistotle 78g

Offline johngodsmith

  • Posts: 49
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #734 on: Thu, 31 January 2019, 20:35:10 »
today is February (at least on my place), so any updates on production?
A few posts up, he said he’ll update mid Feb


Sent from my iPhone using Tapatalk

Offline kim-kim

  • Posts: 42
  • Location: -6.1751, 106.8650
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #735 on: Fri, 01 February 2019, 01:45:35 »
today is February (at least on my place), so any updates on production?
A few posts up, he said he’ll update mid Feb


Sent from my iPhone using Tapatalk

Ah, I see. Thank you, the case will come soon™
XD75 - GMK Terminal - Gatistotle 78g

Offline synchromatik

  • Posts: 9
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #736 on: Sat, 02 February 2019, 07:43:49 »
What do you guys think about GMK Bento combo on this case (75 one) ?
My favorite is SA Pulse but i cant find it anywhere.

Offline r5d

  • Posts: 130
  • Location: Berlin
  • Reddit: /u/thisman
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #737 on: Tue, 05 February 2019, 15:31:35 »
Dolch or banana dolch for sure!
I like keyboards

Offline RETURNISO

  • Posts: 413
  • Location: [ NOR ] ISO
  • I do get excited about keyboard stuff..
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #738 on: Tue, 05 February 2019, 15:47:26 »
SA Oblivion  :cool:

Offline synchromatik

  • Posts: 9
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #739 on: Wed, 06 February 2019, 14:29:45 »
Dolch or banana dolch for sure!

SA Oblivion  :cool:

o lala, decisions, decisions...  :D

Offline RETURNISO

  • Posts: 413
  • Location: [ NOR ] ISO
  • I do get excited about keyboard stuff..
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #740 on: Tue, 12 February 2019, 03:23:25 »
ISO LIFE :cool:

212758-0

Offline FSund

  • Posts: 134
  • Location: Norway
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #741 on: Wed, 13 February 2019, 03:24:54 »
Could anyone do a quick sanity check for me? I'm considering the KBD65 PCB from KBDfans, and as far as I see it should fit the SKB65. Can anyone confirm/deny this?
Join the Mechanical Keyboards Norway Discord server

Offline RETURNISO

  • Posts: 413
  • Location: [ NOR ] ISO
  • I do get excited about keyboard stuff..
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #742 on: Wed, 13 February 2019, 04:09:20 »
Could anyone do a quick sanity check for me? I'm considering the KBD65 PCB from KBDfans, and as far as I see it should fit the SKB65. Can anyone confirm/deny this?

Your are sane!!  :thumb:

Offline Draic

  • Posts: 88
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #743 on: Wed, 13 February 2019, 04:10:59 »
Could anyone do a quick sanity check for me? I'm considering the KBD65 PCB from KBDfans, and as far as I see it should fit the SKB65. Can anyone confirm/deny this?

Your are sane!!  :thumb:

But your SKB will not have a blocker between ctrl and the arrow keys.

Offline RETURNISO

  • Posts: 413
  • Location: [ NOR ] ISO
  • I do get excited about keyboard stuff..
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #744 on: Wed, 13 February 2019, 04:29:58 »
Could anyone do a quick sanity check for me? I'm considering the KBD65 PCB from KBDfans, and as far as I see it should fit the SKB65. Can anyone confirm/deny this?

Your are sane!!  :thumb:

But your SKB will not have a blocker between ctrl and the arrow keys.

Then maybe i have lost my sanity.. But it looks like it support a BR: 1.25, 1.25, 1.25, 6.25, 1.50, 1.50, 1, 1, 1.

Offline FSund

  • Posts: 134
  • Location: Norway
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #745 on: Wed, 13 February 2019, 07:03:01 »
I naturally forgot about the whole blocker issue.

The 1.50, 1.50, 1, 1, 1 lower right might be possible as you said, but It's a bit hard to say with all the holes in that area. I'm going to gamble that it does support that, and in any case I can fall back to non-blocked 1.25, 1.25, 1, 1, 1.
Join the Mechanical Keyboards Norway Discord server

Offline RETURNISO

  • Posts: 413
  • Location: [ NOR ] ISO
  • I do get excited about keyboard stuff..
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #746 on: Wed, 13 February 2019, 07:18:26 »
I naturally forgot about the whole blocker issue.

The 1.50, 1.50, 1, 1, 1 lower right might be possible as you said, but It's a bit hard to say with all the holes in that area. I'm going to gamble that it does support that, and in any case I can fall back to non-blocked 1.25, 1.25, 1, 1, 1.

I gambled and have made a custom plate for it! :p

Offline okidna

  • Posts: 36
  • Location: Indonesia
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #747 on: Wed, 13 February 2019, 09:46:46 »
I naturally forgot about the whole blocker issue.

The 1.50, 1.50, 1, 1, 1 lower right might be possible as you said, but It's a bit hard to say with all the holes in that area. I'm going to gamble that it does support that, and in any case I can fall back to non-blocked 1.25, 1.25, 1, 1, 1.

This is the underside picture of my KBD65 PCB (USB-C), sorry it's already soldered (with 1.25u - 1.25u - blocker - 1u - 1u - 1u layout) but you can still see the option for the lower right area, I've marked the switch holes for 1u - 1u -1u and 1.5u - 1.5u layout :

« Last Edit: Wed, 13 February 2019, 10:03:51 by okidna »

Online ReDsNoTDeAd

  • Posts: 301
  • Location: Alberta, Canada
  • using keeb funds to make 3d printed gfs by 2022
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #748 on: Wed, 13 February 2019, 13:31:10 »
What are Bob's choices for a 75% PCB? Just the kbd75 or are there other options?

Offline okidna

  • Posts: 36
  • Location: Indonesia
Re: [GB] SKB75, SKB65 & SKB60 (Invoices out, payment phase extended)
« Reply #749 on: Wed, 13 February 2019, 18:20:52 »
What are Bob's choices for a 75% PCB? Just the kbd75 or are there other options?

You can also use EEPW84 (XD84 PCB) or YMD75 PCB, both can be found at Aliexpress or KPrepublic's site.