Author Topic: [GB] Noxary 280 & 220 (2nd Prototypes Ordered)  (Read 19826 times)

0 Members and 1 Guest are viewing this topic.

Offline Fewestapollo75

  • Posts: 5
Re: [GB] Noxary 280 & 220 (Invoicing)
« Reply #200 on: Sun, 27 May 2018, 11:51:12 »
Ooh I got one!

I assume that the universal brass will support both MX and Alps? Then would the PCB also support Alps?

Online Oblotzky

  • Posts: 1057
  • Location: Cologne, Germany
  • Buy more Round 7.
    • Get yours here!
Re: [GB] Noxary 280 & 220 (Invoicing)
« Reply #201 on: Sun, 27 May 2018, 12:32:33 »
Ooh I got one!

I assume that the universal brass will support both MX and Alps? Then would the PCB also support Alps?

Universal refers to covering the most common key layouts (ISO, ANSI, Winkeyless and standard TKL, stepped and non-stepped capslock, split right shift and split backspace). AFAIK this board is MX only.
Skog | Skog | Skog | Mira | C225 | M65 | Canoe | Canoe | Lightsaver V3 | TX-CP


Offline Fewestapollo75

  • Posts: 5
Re: [GB] Noxary 280 & 220 (Invoicing)
« Reply #202 on: Sun, 27 May 2018, 13:24:42 »
Ooh I got one!

I assume that the universal brass will support both MX and Alps? Then would the PCB also support Alps?

Universal refers to covering the most common key layouts (ISO, ANSI, Winkeyless and standard TKL, stepped and non-stepped capslock, split right shift and split backspace). AFAIK this board is MX only.

Ah that makes more sense. Thanks!

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 4552
  • Location: United Kingdom
Re: [GB] Noxary 280 & 220 (Invoicing)
« Reply #203 on: Sun, 27 May 2018, 21:55:07 »
Providing the remaining 35 or so pay, then all slots for 280 are gone. If some go unpaid, then I'll probably just sell the rest afterwards.

Thanks all!!

Ooh I got one!

I assume that the universal brass will support both MX and Alps? Then would the PCB also support Alps?

No Alps support since I don't fully understand it yet, sorry!

Offline GeneriksGiraffe

  • Posts: 22
  • Location: New Jersey
  • Living the Rubber Life
Re: [GB] Noxary 280 & 220 (Invoicing)
« Reply #204 on: Mon, 28 May 2018, 11:01:33 »
Providing the remaining 35 or so pay, then all slots for 280 are gone. If some go unpaid, then I'll probably just sell the rest afterwards.

Thanks all!!

Ooh I got one!

I assume that the universal brass will support both MX and Alps? Then would the PCB also support Alps?

No Alps support since I don't fully understand it yet, sorry!

Could there be Alps support in the future maybe?  :p

Offline nicduim

  • Posts: 4
Re: [GB] Noxary 280 & 220 (Invoicing)
« Reply #205 on: Mon, 28 May 2018, 17:28:20 »
Anyone else having issues with not getting the Discord channel after already having it? I know xondat pinned last week about a list of names and asking people to change their tags which I did to match my GH tag for now. Did a new request although not getting the channels still.

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 4552
  • Location: United Kingdom
Re: [GB] Noxary 280 & 220 (Invoicing)
« Reply #206 on: Mon, 28 May 2018, 17:33:57 »
Anyone else having issues with not getting the Discord channel after already having it? I know xondat pinned last week about a list of names and asking people to change their tags which I did to match my GH tag for now. Did a new request although not getting the channels still.

I tagged you a couple times in the role request channel and didn't get a response :-\

Offline nicduim

  • Posts: 4
Re: [GB] Noxary 280 & 220 (Invoicing)
« Reply #207 on: Mon, 28 May 2018, 17:59:50 »
Oh, I don't leave Discord open usually so I missed those. Lets try it again

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 4552
  • Location: United Kingdom
Re: [GB] Noxary 280 & 220 (Invoicing)
« Reply #208 on: Tue, 29 May 2018, 22:46:26 »
Not sure if GH PMs are functional yet... If you need to contact me, Discord - xondat#8433, or email support@noxary.co

Thanks.

Offline Puddsy

  • Baseball Dad
  • * Exalted Elder
  • Posts: 8842
  • Location: North of the Mason-Dixon
  • Clockmaker
Re: [GB] Noxary 280 & 220 (Invoicing)
« Reply #209 on: Wed, 30 May 2018, 21:07:51 »
Not sure if GH PMs are functional yet... If you need to contact me, Discord - xondat#8433, or email support@noxary.co

Thanks.

they're back now
QFR | MJ2 TKL | Realforce 87U | G81-3000 "Schumiboard" | Varmilo Bulgogiboard (Keycon 104) | KBD75 | MIRA (Clearsuns) | Weaven (MOD-M) | TGR Alice (soon!) | A secret board

has puddsy gotten an award for person most involved with things hes not involved in at all, yet?

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 4552
  • Location: United Kingdom
Re: [GB] Noxary 280 & 220
« Reply #210 on: Fri, 01 June 2018, 09:58:31 »
Wristrest for 280 in frosted polycarbonate for a bit of fun.

Form: https://goo.gl/forms/fzPNXuppiOcUKw6v2

Open for two weeks.

Same finish as below


Online Oblotzky

  • Posts: 1057
  • Location: Cologne, Germany
  • Buy more Round 7.
    • Get yours here!
Re: [GB] Noxary 280 & 220
« Reply #211 on: Fri, 01 June 2018, 12:13:59 »
Wristrest for 280 in frosted polycarbonate for a bit of fun.

Form: https://goo.gl/forms/fzPNXuppiOcUKw6v2

Open for two weeks.

Same finish as below

Show Image


Can we have a wrist wrest with brass weight?  :eek:
Skog | Skog | Skog | Mira | C225 | M65 | Canoe | Canoe | Lightsaver V3 | TX-CP


Offline Remsky

  • Posts: 145
  • Location: Portland, OR
Re: [GB] Noxary 280 & 220
« Reply #212 on: Fri, 01 June 2018, 13:01:29 »
Wristrest for 280 in frosted polycarbonate for a bit of fun.

Form: https://goo.gl/forms/fzPNXuppiOcUKw6v2

Open for two weeks.

Same finish as below

Show Image


Can we have a wrist wrest with brass weight?  :eek:
Why not just ask for a brass wrist rest at that point lul

Offline InvidiousIgnoramus

  • Posts: 203
  • Location: Columbia, SC
Re: [GB] Noxary 280 & 220
« Reply #213 on: Fri, 01 June 2018, 15:53:41 »
Wristrest for 280 in frosted polycarbonate for a bit of fun.

Form: https://goo.gl/forms/fzPNXuppiOcUKw6v2

Open for two weeks.

Same finish as below

Show Image


Can we have a wrist wrest with brass weight?  :eek:
Why not just ask for a brass wrist rest at that point lul
Because that would be a multi hundred dollar wrist rest.
I long for the day when I find a beamspring.

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 4552
  • Location: United Kingdom
Re: [GB] Noxary 280 & 220
« Reply #214 on: Fri, 01 June 2018, 22:12:46 »
Invoicing done for 280 and 220.

If everyone could get them paid ASAP, it'd be much appreciated. Most are paid for anyway.

Thank you so much for the support. :-* :-* :-* :-* :-*

Offline aya3154

  • Posts: 66
  • Location: Singapore
  • McWan
Re: [GB] Noxary 280 & 220
« Reply #215 on: Wed, 06 June 2018, 22:32:59 »
Invoicing done for 280 and 220.

If everyone could get them paid ASAP, it'd be much appreciated. Most are paid for anyway.

Thank you so much for the support. :-* :-* :-* :-* :-*

Don't mean to intrude but was wondering if there are any opportunities for another run at the 280?

Offline Lndefinite

  • Posts: 21
Re: [GB] Noxary 280 & 220
« Reply #216 on: Wed, 06 June 2018, 22:37:39 »
Thanks Xondat for making dank keebs with 5mm plates. <3

Offline Remsky

  • Posts: 145
  • Location: Portland, OR
Re: [GB] Noxary 280 & 220
« Reply #217 on: Thu, 07 June 2018, 00:48:11 »
Invoicing done for 280 and 220.

If everyone could get them paid ASAP, it'd be much appreciated. Most are paid for anyway.

Thank you so much for the support. :-* :-* :-* :-* :-*

Don't mean to intrude but was wondering if there are any opportunities for another run at the 280?
Probably whenever xondat does his V3 series, or when a certain plastic meme version comes out.

Offline bjayswift

  • Posts: 23
Re: [GB] Noxary 280 & 220
« Reply #218 on: Thu, 07 June 2018, 06:05:08 »
Excited about this. I keep coming back to check it out. Now I need patience

Sent from my SAMSUNG-SM-G930A using Tapatalk

TX1800V2

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 4552
  • Location: United Kingdom
Re: [GB] Noxary 280 & 220
« Reply #219 on: Thu, 07 June 2018, 09:50:12 »
Invoicing done for 280 and 220.

If everyone could get them paid ASAP, it'd be much appreciated. Most are paid for anyway.

Thank you so much for the support. :-* :-* :-* :-* :-*

Don't mean to intrude but was wondering if there are any opportunities for another run at the 280?

Uh I might do a polycarbonate version, but for this exact design, you won't see it again :(

Offline donut_sauce

  • Posts: 244
Re: [GB] Noxary 280 & 220
« Reply #220 on: Thu, 07 June 2018, 10:00:04 »
I would love a polycarb version!

Offline Lndefinite

  • Posts: 21
Re: [GB] Noxary 280 & 220
« Reply #221 on: Thu, 07 June 2018, 11:29:21 »
Invoicing done for 280 and 220.

If everyone could get them paid ASAP, it'd be much appreciated. Most are paid for anyway.

Thank you so much for the support. :-* :-* :-* :-* :-*

Don't mean to intrude but was wondering if there are any opportunities for another run at the 280?

Uh I might do a polycarbonate version, but for this exact design, you won't see it again :(

Mmm, polycarb 280 with 5mm brass plate.  ;)

Offline hideyourholes

  • Posts: 21
Re: [GB] Noxary 280 & 220
« Reply #222 on: Thu, 07 June 2018, 13:58:53 »
Invoicing done for 280 and 220.

If everyone could get them paid ASAP, it'd be much appreciated. Most are paid for anyway.

Thank you so much for the support. :-* :-* :-* :-* :-*

Don't mean to intrude but was wondering if there are any opportunities for another run at the 280?

Uh I might do a polycarbonate version, but for this exact design, you won't see it again :(
Solid gold 280 next?

Offline Remsky

  • Posts: 145
  • Location: Portland, OR
Re: [GB] Noxary 280 & 220
« Reply #223 on: Thu, 07 June 2018, 15:23:29 »
Invoicing done for 280 and 220.

If everyone could get them paid ASAP, it'd be much appreciated. Most are paid for anyway.

Thank you so much for the support. :-* :-* :-* :-* :-*

Don't mean to intrude but was wondering if there are any opportunities for another run at the 280?

Uh I might do a polycarbonate version, but for this exact design, you won't see it again :(
Solid gold 280 next?
Gold? LUL. Try tungsten

Offline superdoedoe

  • Posts: 215
  • Location: Straya
  • ( ͡° ͜ʖ ͡°)
Re: [GB] Noxary 280 & 220
« Reply #224 on: Thu, 07 June 2018, 18:34:35 »
why not just Titanium :D

( ͡° ͜ʖ ͡°)

Offline aya3154

  • Posts: 66
  • Location: Singapore
  • McWan
Re: [GB] Noxary 280 & 220
« Reply #225 on: Mon, 11 June 2018, 15:58:00 »
Invoicing done for 280 and 220.

If everyone could get them paid ASAP, it'd be much appreciated. Most are paid for anyway.

Thank you so much for the support. :-* :-* :-* :-* :-*

Don't mean to intrude but was wondering if there are any opportunities for another run at the 280?

Uh I might do a polycarbonate version, but for this exact design, you won't see it again :(

A polycarbonate version would be lovely  :eek:

Offline idlemao

  • Posts: 57
  • Location: City of Angels
Re: [GB] Noxary 280 & 220
« Reply #226 on: Mon, 18 June 2018, 22:58:17 »
There don't happen to be any extras or people who want to sell their slot is there?  :'(

Offline Mcnos

  • Posts: 53
Re: [GB] Noxary 280 & 220
« Reply #227 on: Tue, 19 June 2018, 01:03:57 »
There don't happen to be any extras or people who want to sell their slot is there?  :'(

Help my best friend here. I know somebody is in need of money lol

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 4552
  • Location: United Kingdom
Re: [GB] Noxary 280 & 220 (Anodizing Samples)
« Reply #228 on: Sun, 08 July 2018, 11:07:53 »
It's been quiet here due to not much movement. Still on track for the shipping dates.

Most of it was getting everything paid for and confirming details.

After this, I wanted to wait on anodizing samples before moving forward. I now have these, so 280/220 will enter manufacturing once X60 R is shipped to me (as these are being produced with the same anodizing color).





Harsh/direct sunlight:



X60 R will not use the Olive color, however this color will be changed and I'll receive another sample as I'm not happy with it.

The dark gray will change from Pantone 8402 C to 8401 C as it's too dark.

Everything else will stay the same.

Thanks.

Offline o3okevin

  • Posts: 109
  • Location: Canada
Re: [GB] Noxary 280 & 220 (Anodizing Samples)
« Reply #229 on: Sun, 08 July 2018, 12:43:08 »
Nice!

Offline wholypantalones

  • Posts: 268
  • Location: 616
Re: [GB] Noxary 280 & 220 (Anodizing Samples)
« Reply #230 on: Sun, 08 July 2018, 12:55:20 »
Damn, I'm liking that crimson red now.  :thumb:

Online Etherealsound

  • Posts: 107
  • Location: Madison, WI
Re: [GB] Noxary 280 & 220 (Anodizing Samples)
« Reply #231 on: Mon, 09 July 2018, 22:59:43 »
Damn, I'm liking that crimson red now.  :thumb:

yeah me too....problem is that while that crimson is undoubtedly beautiful, there are other gb's that offer red but I can't really think of any other gb that is offering blue-grey.

Offline bciamny

  • Posts: 128
Re: [GB] Noxary 280 & 220 (Anodizing Samples)
« Reply #232 on: Mon, 09 July 2018, 23:02:10 »
hey xondat i've sent you a pm and an email about confirming my color choices. i hope you get a chance to respond soon. :)

Offline superdoedoe

  • Posts: 215
  • Location: Straya
  • ( ͡° ͜ʖ ͡°)
Re: [GB] Noxary 280 & 220 (Anodizing Samples)
« Reply #233 on: Tue, 10 July 2018, 00:22:47 »
hey xondat i've sent you a pm and an email about confirming my color choices. i hope you get a chance to respond soon. :)

Discord Is also a great way to contact him. If you aren't in the Noxary discord server I urge you to join it.
( ͡° ͜ʖ ͡°)

Offline bciamny

  • Posts: 128
Re: [GB] Noxary 280 & 220 (Anodizing Samples)
« Reply #234 on: Tue, 10 July 2018, 15:16:44 »
hey xondat i've sent you a pm and an email about confirming my color choices. i hope you get a chance to respond soon. :)

Discord Is also a great way to contact him. If you aren't in the Noxary discord server I urge you to join it.

i don't really use discord so i haven't tried to reach him there. if i have to use that to get a response, i guess i will.

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 4552
  • Location: United Kingdom
Re: [GB] Noxary 280 & 220 (Anodizing Samples)
« Reply #235 on: Tue, 10 July 2018, 15:20:13 »
hey xondat i've sent you a pm and an email about confirming my color choices. i hope you get a chance to respond soon. :)

Yes I saw it, just didn't reply :)

I'll read it again

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 4552
  • Location: United Kingdom
Re: [GB] Noxary 280 & 220 (Anodizing Samples)
« Reply #236 on: Thu, 12 July 2018, 10:15:58 »
Hi,

A lot of the background chatter on this buy has been on my Discord server. I've now closed the group buy channels for this buy, and all discussion can be here.

The reasoning: This thread was posted -- the intent seems to be to make group buy issues public. I addressed the images here.

None of these issues will be present with this buy, as all have been resolved with the factory.

I want to apologize for how careless this may look. I will continue to do my best, and from now on, be completely transparent with the kits.

Thanks, Anthony.

Online MyManMart

  • Posts: 8
Re: [GB] Noxary 280 & 220 (Anodizing Samples)
« Reply #237 on: Thu, 12 July 2018, 10:25:29 »
Oh man. I had only seen one picture of the samples. The added ones show how good looking that blue grey is. Wew.

Online Data

  • Posts: 2566
  • Location: Orlando, FL
Re: [GB] Noxary 280 & 220
« Reply #238 on: Thu, 12 July 2018, 12:01:35 »

Offline daishan

  • Posts: 1
Re: [GB] Noxary 280 & 220 (Anodizing Samples)
« Reply #239 on: Thu, 12 July 2018, 13:11:13 »
Is a color confirmation form still planned or should we send PMs to do that?

Offline bciamny

  • Posts: 128
Re: [GB] Noxary 280 & 220 (Anodizing Samples)
« Reply #240 on: Thu, 12 July 2018, 14:11:44 »
Is a color confirmation form still planned or should we send PMs to do that?

that form was put out shortly after the gb/payment time ended.

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 4552
  • Location: United Kingdom
Re: [GB] Noxary 280 & 220 (Anodizing Samples)
« Reply #241 on: Thu, 12 July 2018, 14:15:45 »
Is a color confirmation form still planned or should we send PMs to do that?

that form was put out shortly after the gb/payment time ended.

I haven’t done it yet, still deciding final colour for Olive.

I’ll post the form when I’ve decided!

Offline wholypantalones

  • Posts: 268
  • Location: 616
Re: [GB] Noxary 280 & 220 (Anodizing Samples)
« Reply #242 on: Thu, 12 July 2018, 17:11:17 »
Interesting turn of events for a GB.

Offline radio_killah

  • Posts: 1424
  • Location: Bay Area
  • Chinchillin'
Re: [GB] Noxary 280 & 220 (Anodizing Samples)
« Reply #243 on: Fri, 13 July 2018, 01:44:54 »
Agreed that GB updates should be shared here as this is a GH GB. @Xondat I am sure you didn't mean for things to play out like that. I am still looking forward to this. Please don't disappoint.

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 4552
  • Location: United Kingdom
Re: [GB] Noxary 280 & 220 (Anodizing Samples)
« Reply #244 on: Mon, 16 July 2018, 12:45:01 »
Ordered the 2nd prototypes, will put a date to it when the factory gives me one. Also ordered a new Olive sample. I'll have the color changes form up in the next couple of days.

Still on good pace anyway :thumb:

Offline pixelpusher

  • Formerly known as reececonrad
  • Posts: 1933
  • Location: Tennessee - USA
Re: [GB] Noxary 280 & 220 (Anodizing Samples)
« Reply #245 on: Mon, 16 July 2018, 13:22:43 »
Ordered the 2nd prototypes, will put a date to it when the factory gives me one. Also ordered a new Olive sample. I'll have the color changes form up in the next couple of days.

Still on good pace anyway :thumb:

Thanks for the update, sir.   :thumb:
:)

Offline xondat

  • i'm not a star
  • * Maker
  • Thread Starter
  • Posts: 4552
  • Location: United Kingdom
Re: [GB] Noxary 280 & 220 (2nd Prototypes Ordered)
« Reply #246 on: Mon, 16 July 2018, 14:51:00 »
Also, apologies for my mistake in the OP. I noted late August shipping time, but I've had September in my mind. Anyway, we'll see when the factory says. :)