Author Topic: [GB] Modern M0110 custom keyboard  (Read 176668 times)

0 Members and 1 Guest are viewing this topic.

Offline deskcandy

  • Posts: 107
  • Location: Los Angeles, California
  • Keyboards your way.
    • Desk Candy
Re: [GB] Modern M0110 custom keyboard
« Reply #650 on: Wed, 26 August 2020, 21:57:55 »
Current status:



Last Cerakote keyboard is done and just awaiting my pickup from the vendor. Spent some time at the anodizer today and we're mostly on track there but a bunch of keyboards need to be re-blasted which is going to keep delaying the remaining units. Almost done guys!

Offline deskcandy

  • Posts: 107
  • Location: Los Angeles, California
  • Keyboards your way.
    • Desk Candy
Re: [GB] Modern M0110 custom keyboard
« Reply #651 on: Fri, 28 August 2020, 00:49:11 »
Hey folks,

Just wanted to announce that we just reached a critical milestone - all Cerakote finishing is complete!! There are 8 anodized units left to finish and then this GB will be complete and I can ship proxy orders!

If you ordered directly from Desk Candy and have NOT received your order confirmation email and you think this is in error, please contact me asap!

Thanks everyone

Offline TheBlackHammer

  • Posts: 10
Re: [GB] Modern M0110 custom keyboard
« Reply #652 on: Fri, 28 August 2020, 06:45:03 »
Hey folks,

Just wanted to announce that we just reached a critical milestone - all Cerakote finishing is complete!! There are 8 anodized units left to finish and then this GB will be complete and I can ship proxy orders!

If you ordered directly from Desk Candy and have NOT received your order confirmation email and you think this is in error, please contact me asap!

Thanks everyone
AHHH!! Does this mean I can get an extra someone soon?


Sent from my iPhone using Tapatalk

Offline MPAstudio

  • Posts: 8
  • Location: Gangnam-gu, SEOUL, SOUTH KOREA
Re: [GB] Modern M0110 custom keyboard
« Reply #653 on: Mon, 31 August 2020, 19:00:33 »
These are the results of TWO YEARS WAITING.






MPAstudio _ Architecture Lab

Offline chicagoboss25

  • Posts: 61
  • Location: SoCal
  • deskcandy.xyz | reddit.com/u/heroyjenkins
    • Desk Candy
Re: [GB] Modern M0110 custom keyboard
« Reply #654 on: Tue, 01 September 2020, 11:12:56 »
I guess since this is posted here I'll respond before the pitchforks hunt me down. I offered this person an exchange on the top piece for another grey top. What they haven't shown you is that there is a 2 inch square custom engraving on the bottom so I will not be able to exchange the bottom piece.
« Last Edit: Tue, 01 September 2020, 12:11:41 by chicagoboss25 »

Offline MPAstudio

  • Posts: 8
  • Location: Gangnam-gu, SEOUL, SOUTH KOREA
Re: [GB] Modern M0110 custom keyboard
« Reply #655 on: Tue, 01 September 2020, 11:55:48 »
It is unfair that the exchange cannot be made just because there is a custom engrave. If I knew this would happen, I wouldn't have ordered custom engrave options. Horrible defective housing is my fault? It is not as high quality as an $80 housing, even though it is a U.S. production you always said.
MPAstudio _ Architecture Lab

Offline MPAstudio

  • Posts: 8
  • Location: Gangnam-gu, SEOUL, SOUTH KOREA
Re: [GB] Modern M0110 custom keyboard
« Reply #656 on: Tue, 01 September 2020, 12:14:57 »
Its TWO YEARS.. T W O YEARS. I've been waiting two years for this.
MPAstudio _ Architecture Lab

Offline TheBlackHammer

  • Posts: 10
Re: [GB] Modern M0110 custom keyboard
« Reply #657 on: Tue, 01 September 2020, 21:49:56 »
Its TWO YEARS.. T W O YEARS. I've been waiting two years for this.
If you would like I would gladly take it off your hands for your price and I would love it every single day


Sent from my iPhone using Tapatalk

Offline MPAstudio

  • Posts: 8
  • Location: Gangnam-gu, SEOUL, SOUTH KOREA
Re: [GB] Modern M0110 custom keyboard
« Reply #658 on: Wed, 02 September 2020, 00:08:14 »
-
MPAstudio _ Architecture Lab

Offline MPAstudio

  • Posts: 8
  • Location: Gangnam-gu, SEOUL, SOUTH KOREA
Re: [GB] Modern M0110 custom keyboard
« Reply #659 on: Wed, 02 September 2020, 00:08:55 »
Its TWO YEARS.. T W O YEARS. I've been waiting two years for this.
If you would like I would gladly take it off your hands for your price and I would love it every single day


Sent from my iPhone using Tapatalk

It is currently in anodizing factory in korea. (for glass sanding & re-anodizing)
If I get the keyboard back and they don't meet my standards, I'll sell it.
Anyway it'll much better than now.
MPAstudio _ Architecture Lab

Offline deskcandy

  • Posts: 107
  • Location: Los Angeles, California
  • Keyboards your way.
    • Desk Candy
Re: [GB] Modern M0110 custom keyboard
« Reply #660 on: Tue, 08 September 2020, 13:22:31 »
Hey everyone, we are complete on manufacturing! If there are any issues I will do my best to resolve them but I do not intend to keep manufacturing keyboards after this GB is fully wrapped (what that means in a moment) so would appreciate everyone checking in on their order after they receive it - if you email me a few months after you receive your order and there's a problem, I might not be able to help at that point.

So in terms of next steps here:

1. I have reached out to Mykeyboard and zFrontier and as soon as I hear back will work on shipping the proxy orders
2. There are 7 more keyboards to ship to US customers and I've sent order confirmations for all of them so please check your emails
3. Once #1 and #2 are complete, I will start releasing some extra accessories like plates, wrist rests, and XDA Oblique keycaps (Modern M0110 kits). This is done first so those of you who already have a keyboard have first dibs on the extra accessories (if you don't have a Modern M0110 now you're probably not in the market for a plate). Once that runs for a week or so, then I'll start releasing extra Modern M0110 units on hand. Vast majority of these will be Light Sand Cerakote and possibly a few other colors (TBD) in very small quantities.

That's it, thanks everyone and have a good week.

Offline jcs

  • Posts: 1
    • jcs.org
Re: [GB] Modern M0110 custom keyboard
« Reply #661 on: Tue, 08 September 2020, 15:32:22 »
Where will you be selling the extra units?

Offline deskcandy

  • Posts: 107
  • Location: Los Angeles, California
  • Keyboards your way.
    • Desk Candy
Re: [GB] Modern M0110 custom keyboard
« Reply #662 on: Tue, 08 September 2020, 21:24:28 »
Desk Candy website

Offline TheBlackHammer

  • Posts: 10
Re: [GB] Modern M0110 custom keyboard
« Reply #663 on: Sun, 13 September 2020, 20:43:30 »
Super excited for extras been waiting almost a year for this!!


Sent from my iPhone using Tapatalk

Offline piercejenkins

  • Posts: 58
Re: [GB] Modern M0110 custom keyboard
« Reply #664 on: Sun, 13 September 2020, 22:13:20 »
My body is ready to pick up one of the light sand extras.  I sad I missed the initial GB. How will we be notified when it goes live?

Offline vurtomatic

  • Posts: 24
Re: [GB] Modern M0110 custom keyboard
« Reply #665 on: Sun, 13 September 2020, 22:58:18 »
And how much?

Offline dead_pixel_design

  • Posts: 623
  • Location: Portland, OR
  • IIIV is not a Roman Numeral. Positive Vibes.
Re: [GB] Modern M0110 custom keyboard
« Reply #666 on: Wed, 16 September 2020, 11:57:54 »
Received. Standard ano finish. No finish manufacturing errors like some others have show fortunately, but extremely disappointed with the poor quality engraving. Both the custom engraving which has unfinished lines of laser pass, as well as the interior 'designed in europe' line that tilts slightly/is not straight.

Overall I am very happy with the keyboard, but I expect more for the time and cost.

Offline deskcandy

  • Posts: 107
  • Location: Los Angeles, California
  • Keyboards your way.
    • Desk Candy
Re: [GB] Modern M0110 custom keyboard
« Reply #667 on: Wed, 16 September 2020, 23:14:12 »
Messaged you back directly, sorry you're not happy with the custom engraving quality.

In terms of overall status, there's only one order left where I've tried to contact the person 3 times with no response. If you are order #064 please get in touch with me asap so I can get your keyboards shipped out to you.

Price for extras will probably be $500/ea for Light Sand Cerakote blanks (i.e., no engraving) including a plate. Still trying to work through GB orders as the first priority but if it's just the 1 order (#064) I'm waiting on, I can't let that block doing extras.

Offline piercejenkins

  • Posts: 58
Re: [GB] Modern M0110 custom keyboard
« Reply #668 on: Wed, 16 September 2020, 23:16:10 »
How soon are we talking then?

Offline deskcandy

  • Posts: 107
  • Location: Los Angeles, California
  • Keyboards your way.
    • Desk Candy
Re: [GB] Modern M0110 custom keyboard
« Reply #669 on: Wed, 16 September 2020, 23:18:04 »
Within the next week or so. Will be posting here and also sending an email to the newsletter to announce when units are going live and put behind a timer to make it fair instead of randomly doing it. Will try to give about 2 days notice :)

Offline TheBlackHammer

  • Posts: 10
Re: [GB] Modern M0110 custom keyboard
« Reply #670 on: Fri, 18 September 2020, 08:07:16 »
Would the instant60 pcb by cannon keys work with this case?


Sent from my iPhone using Tapatalk

Offline beekey

  • Posts: 398
Re: [GB] Modern M0110 custom keyboard
« Reply #671 on: Fri, 18 September 2020, 08:26:00 »
Within the next week or so. Will be posting here and also sending an email to the newsletter to announce when units are going live and put behind a timer to make it fair instead of randomly doing it. Will try to give about 2 days notice :)
Shouldn't you wait until all people got their case? Maybe you need to replace one or two.

Offline aslanxdeft

  • Posts: 68
Re: [GB] Modern M0110 custom keyboard
« Reply #672 on: Fri, 18 September 2020, 11:38:10 »
Within the next week or so. Will be posting here and also sending an email to the newsletter to announce when units are going live and put behind a timer to make it fair instead of randomly doing it. Will try to give about 2 days notice :)
Shouldn't you wait until all people got their case? Maybe you need to replace one or two.
Look 4 posts above yours

Offline LXVRGS

  • Posts: 175
Re: [GB] Modern M0110 custom keyboard
« Reply #673 on: Fri, 18 September 2020, 12:40:16 »
Would the instant60 pcb by cannon keys work with this case?


Sent from my iPhone using Tapatalk

yes

Offline pixelpusher

  • Posts: 3528
  • Location: Tennessee - USA
Re: [GB] Modern M0110 custom keyboard
« Reply #674 on: Fri, 18 September 2020, 12:45:17 »
Would the instant60 pcb by cannon keys work with this case?


Sent from my iPhone using Tapatalk


Iím using one right now.

Offline TheBlackHammer

  • Posts: 10
Re: [GB] Modern M0110 custom keyboard
« Reply #675 on: Sun, 20 September 2020, 13:19:05 »
Does anyone know where I can get sound dampening material for this board. I couldnít wait and found one for a great price


Sent from my iPhone using Tapatalk

Offline pixelpusher

  • Posts: 3528
  • Location: Tennessee - USA
Re: [GB] Modern M0110 custom keyboard
« Reply #676 on: Mon, 21 September 2020, 09:32:21 »
Shelf liner or craft foam works well and is cheap.

Gorilla Grip Original Drawer and Shelf Liner
https://www.amazon.com/dp/B07GZY8PG7

80 PCS EVA Foam Handicraft Sheets, Craft Foam Sheets Assorted Colorful for Craft Projects 16 Colors - 8.25 x 5.8 inches
https://www.amazon.com/dp/B07TBRX97Z