Author Topic: SPRIT Model 1 Case : Poker 60% 75% 87% 110% + Ducky, Filco, Leopold (Read 70304 times)

sprit · « **on:** Wed, 06 November 2013, 04:00:27 »

SPRIT Model 1 Case

Poker, 60%, GH60, MXmini, 87 TKL, Alps PCB ...

Now This Topic integrated with PCB Topic for the better Convinience.
http://geekhack.org/index.php?topic=50580.0 edit : Nov.28 04:00 AST

Design Reference http://www.youtube.com/channel/UCLG-nNBTnoggGvpK5i9XM3w/videos

The Final IC http://geekhack.org/index.php?topic=50418.0
60% http://geekhack.org/index.php?topic=49899.0
75% http://geekhack.org/index.php?topic=49902.0
87% http://geekhack.org/index.php?topic=50075.0
110% Pics will show soon

60% Case : Fixed Price 70 USD /1set ( MOQ = 50sets) Limited Qty.
75% Case : Fixed Price 70 USD /1set ( MOQ = 50sets) Limited Qty.
87% Case : Fixed Price 80 USD /1set ( MOQ = 50sets) Limited Qty.
110% Case : Fixed Price 85 USD /1set ( MOQ = 25sets) Limited Qty.

Order Acryl Case ! : 2nd Wave
http://geekhack.org/index.php?topic=50580.0

Order PCB ! : 2nd Wave

http://geekhack.org/index.php?topic=50580.0

Some Case Pics, not drilled yet. The 87% and 110%, Top covers not shown in pics.

87% Leopold, Filco, Ducky, ... Mods (Not drilled Yet, top covers not shown yet in pics. But You may imagine!)

Bottles · « **Reply #1 on:** Wed, 06 November 2013, 07:10:23 »

Will the 100% case be compatible with a Ducky Shine II?

danielucf · « **Reply #2 on:** Wed, 06 November 2013, 07:32:36 »

Watching this one too, if you need help with the form for order or pre-order entry send me a PM.

bazemk1979 · « **Reply #3 on:** Wed, 06 November 2013, 08:04:36 »

Sprit is 100% case the full board layout? will there be metal 100% case also? Also PCB and plate GB?

cyberwave · « **Reply #4 on:** Wed, 06 November 2013, 08:07:39 »

do these come with stabilizers?

sprit · « **Reply #5 on:** Wed, 06 November 2013, 08:15:02 »

Quote from: bazemk1979 on Wed, 06 November 2013, 08:04:36

Sprit is 100% case the full board layout? will there be metal 100% case also? Also PCB and plate GB?

Hello! Yes! It's a 110% Full Layout! Yes! Plate and PCBs too.
SPRIT Model 1M Metal ones will start in two weeks Due to the Factory Schedule.

JPG · « **Reply #6 on:** Wed, 06 November 2013, 08:22:40 »

I would like to see some pictures of the side of the case to see the layers and also the front/back of it.

sprit · « **Reply #7 on:** Wed, 06 November 2013, 08:30:24 »

Quote from: JPG on Wed, 06 November 2013, 08:22:40

I would like to see some pictures of the side of the case to see the layers and also the front/back of it.

Hello! Nice to See You! It was raining in Seoul Today, so I will prepare more photos in a couple of days!

jdcarpe · « **Reply #8 on:** Wed, 06 November 2013, 08:45:29 »

Nice! But I'm holding out for metal.

BliTzKiN · « **Reply #9 on:** Wed, 06 November 2013, 09:44:06 »

I'll be looking forward to metal cases as well

Latin00032 · « **Reply #10 on:** Wed, 06 November 2013, 10:54:59 »

Quote from: sprit on Wed, 06 November 2013, 08:15:02

Quote from: bazemk1979 on Wed, 06 November 2013, 08:04:36
Sprit is 100% case the full board layout? will there be metal 100% case also? Also PCB and plate GB?
Hello! Yes! It's a Full Layout!
Metal Case models will start in two weeks due to the Factory Schedule.

Are the aluminum cases going to be hard anodized?

sprit · « **Reply #11 on:** Wed, 06 November 2013, 11:06:54 »

Quote from: Latin00032 on Wed, 06 November 2013, 10:54:59

Are the aluminum cases going to be hard anodized?

I Love the Hard Ones!! I Do Hate Softy ones! Sire !

sprit · « **Reply #12 on:** Wed, 06 November 2013, 11:11:02 »

Quote from: Bottles on Wed, 06 November 2013, 07:10:23

Will the 100% case be compatible with a Ducky Shine II?

I can make a Mod Version for the Ducky Shine! Easy Job I guess!

sprit · « **Reply #13 on:** Wed, 06 November 2013, 11:14:14 »

Quote from: cyberwave on Wed, 06 November 2013, 08:07:39

do these come with stabilizers?

I will check it Sir!

sprit · « **Reply #14 on:** Wed, 06 November 2013, 11:16:28 »

Quote from: jdcarpe on Wed, 06 November 2013, 08:45:29

Nice! But I'm holding out for metal.

Sir! Would You Like This ?

Latin00032 · « **Reply #15 on:** Wed, 06 November 2013, 11:38:12 »

Quote from: sprit on Wed, 06 November 2013, 11:16:28

Quote from: jdcarpe on Wed, 06 November 2013, 08:45:29
Nice! But I'm holding out for metal.
Sir! Would You Like This ?

(Attachment Link)

Sexy!

Quote from: sprit on Wed, 06 November 2013, 11:06:54

Quote from: Latin00032 on Wed, 06 November 2013, 10:54:59
Are the aluminum cases going to be hard anodized?
I Love the Hard Ones!! I Do Hate Softy ones! Sire !

So, hard anodized is a go, right?

jdcarpe · « **Reply #16 on:** Wed, 06 November 2013, 11:43:59 »

Quote from: sprit on Wed, 06 November 2013, 11:16:28

Quote from: jdcarpe on Wed, 06 November 2013, 08:45:29
Nice! But I'm holding out for metal.
Sir! Would You Like This ?

(Attachment Link)

Yes, I would love a Lamborghini case, please.

archer · « **Reply #17 on:** Wed, 06 November 2013, 11:53:29 »

Are these acrylic cases (87) something that I could simply drop a filco into?

sprit · « **Reply #18 on:** Wed, 06 November 2013, 12:00:50 »

Quote from: archer on Wed, 06 November 2013, 11:53:29

Are these acrylic cases (87) something that I could simply drop a filco into?

May I prepare a Mod. cases for Filco? I am Preparing Some Mod cases for 87 boards.

MKULTRA · « **Reply #19 on:** Wed, 06 November 2013, 12:38:44 »

Do these cases come with acrylic plates? Or can you use stainless steel/aluminum plates with them? Order reserved btw.

pichu23 · « **Reply #20 on:** Wed, 06 November 2013, 12:54:53 »

I'll watch this thread. Need to see the colour options

yicaoyimu · « **Reply #21 on:** Wed, 06 November 2013, 13:15:39 »

Is matte finish acrylic case an option? The one in your interest check thread. And will the PolyCarbon cases be a separate GB thread?

It makes more sense to me to extend deadline for this GB till metal cases come out. So we could combine shipping of PCB and cases.

mashby · « **Reply #22 on:** Wed, 06 November 2013, 13:59:08 »

I'm in for one.

sprit · « **Reply #23 on:** Wed, 06 November 2013, 14:11:02 »

Quote from: yicaoyimu on Wed, 06 November 2013, 13:15:39

Is matte finish acrylic case an option? The one in your interest check thread. And will the PolyCarbon cases be a separate GB thread?

It makes more sense to me to extend deadline for this GB till metal cases come out. So we could combine shipping of PCB and cases.

Thank You very much! Matte finish will be included for 100% Sure! Polycarbon is not in this 1st wave this week,
But will be right here in this Topic in two Weeks! to get start with the Metallic cases as You mentioned.
this is matty ;

blighty · « **Reply #24 on:** Wed, 06 November 2013, 14:28:26 »

Quote from: sprit on Wed, 06 November 2013, 04:00:27

- Thin or Wider, Color Option Page will open From Nov. 11 ~

(Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) (Attachment Link) [/size]

Are these pictures of the "thick" acrylic boards?

sprit · « **Reply #25 on:** Wed, 06 November 2013, 14:52:29 »

2 kinds mixed Sir! thin + wider.

AlexJP · « **Reply #26 on:** Wed, 06 November 2013, 16:23:01 »

one thin

sprit · « **Reply #27 on:** Wed, 06 November 2013, 20:01:06 »

' All Versatile Cases ' : Supporting any GH PCBs, Poker, 60% 75% KMAC, 87 TKL, etc ...... !
.....
At this Moment, I want to tell My Design Concept Officially. (Oct.29) http://geekhack.org/index.php?topic=49899.0

100% Interchangeable, 100% Interoperable, 100% Mix n Match !
All 60% will do. All 75% will do. All 87% and 100% will do.
All Poly models will 'Mix n Match' with Metallic models. As They Share All the Basic Designs. ....

So What?

What We want at all ?? = Maximum Free Joy of Typing ! in my opinion.

http://www.youtube.com/watch?v=FTY8H7zjdtc

MKULTRA · « **Reply #28 on:** Wed, 06 November 2013, 20:08:37 »

Metal + acrylic case? Oh this is gonna be fun.

Dubsgalore · « **Reply #29 on:** Wed, 06 November 2013, 20:52:52 »

In for 1 60% Acryl Case

sprit · « **Reply #30 on:** Wed, 06 November 2013, 22:44:41 »

Quote from: MKULTRA on Wed, 06 November 2013, 20:08:37

Metal + acrylic case? Oh this is gonna be fun.

That is Absolutely Why I am into this GB. Sir!

sprit · « **Reply #31 on:** Wed, 06 November 2013, 23:22:39 »

OK! Drunken Skull CC going to GH Community.

funkymeeba · « **Reply #32 on:** Wed, 06 November 2013, 23:33:04 »

These look truly beautiful, sprit! I'm in for one!

sprit · « **Reply #33 on:** Thu, 07 November 2013, 01:41:26 »

Thx a lot ! They Look and Feel Wonderful in my Opinion .

sprit · « **Reply #34 on:** Thu, 07 November 2013, 09:36:56 »

Basicallly You can put down on any blank Row In the Reservation Form.
If two person try to fill the same row at the same time, It will freeze,,, collide.

durandalx · « **Reply #35 on:** Thu, 07 November 2013, 10:56:36 »

In for 2 - these look great!

Glissant · « **Reply #36 on:** Thu, 07 November 2013, 11:02:18 »

I'm in for one 75% case

TLSC.wipeOut · « **Reply #37 on:** Thu, 07 November 2013, 16:32:00 »

Hello Sprit, does the TKL Acrylic Case/Metal Case accomodate for the Phantom PCB with plate??
Thanks!

pasph · « **Reply #38 on:** Thu, 07 November 2013, 16:36:11 »

Quote from: TLSC.wipeOut on Thu, 07 November 2013, 16:32:00

Hello Sprit, does the TKL Acrylic Case/Metal Case accomodate for the Phantom PCB with plate??
Thanks!

^This^

MOZ · « **Reply #39 on:** Thu, 07 November 2013, 16:42:12 »

Are these cases bolted as I don't see any holes or are they glued?

sprit · « **Reply #40 on:** Thu, 07 November 2013, 20:16:57 »

Quote from: pasph on Thu, 07 November 2013, 16:36:11

Quote from: TLSC.wipeOut on Thu, 07 November 2013, 16:32:00
Hello Sprit, does the TKL Acrylic Case/Metal Case accomodate for the Phantom PCB with plate??
Thanks!

^This^

OK! I have been Working on this!~~ and I say Yes!

sprit · « **Reply #41 on:** Thu, 07 November 2013, 20:18:46 »

Quote from: MOZ on Thu, 07 November 2013, 16:42:12

Are these cases bolted as I don't see any holes or are they glued?

Hi! Moz Pics are the Finals : only need to cut holes for each compatible PCBs.

MKULTRA · « **Reply #42 on:** Thu, 07 November 2013, 20:22:20 »

Quote from: sprit on Thu, 07 November 2013, 20:18:46

Quote from: MOZ on Thu, 07 November 2013, 16:42:12
Are these cases bolted as I don't see any holes or are they glued?
Hi! Moz Pics are the Finals : only need to cut holes for each compatible PCBs.

How do the layers of the case connect?

sprit · « **Reply #43 on:** Thu, 07 November 2013, 20:29:06 »

Quote from: MKULTRA on Thu, 07 November 2013, 20:22:20

Quote from: sprit on Thu, 07 November 2013, 20:18:46
Quote from: MOZ on Thu, 07 November 2013, 16:42:12
Are these cases bolted as I don't see any holes or are they glued?
Hi! Moz Pics are the Finals : only need to cut holes for each compatible PCBs.
How do the layers of the case connect?

Nothing Special Sir! Just Standard Connection for each Layers. Bolting! Not ugly on Top.. I will show It Soon ! Promise!

sprit · « **Reply #44 on:** Thu, 07 November 2013, 23:19:59 »

Clear Case Pic. for Amir !

A Round Cut Version is Available !

MKULTRA · « **Reply #45 on:** Fri, 08 November 2013, 01:01:22 »

Wow lots of options! Very customizable.

Latin00032 · « **Reply #46 on:** Fri, 08 November 2013, 03:08:09 »

Two questions.

Will the thick cases support the round cut?

Is this case case compatible with CM QFRs?

sprit · « **Reply #47 on:** Fri, 08 November 2013, 03:16:01 »

Quote from: Latin00032 on Fri, 08 November 2013, 03:08:09

Two questions.

Will the thick cases support the round cut?

Is this case case compatible with CM QFRs?

1. Yes ! : thin/wider > round cut /sharp cut
2. CM QFR = I will show Mod for CM Soon Sir! http://geekhack.org/index.php?topic=49102.0

digi · « **Reply #48 on:** Fri, 08 November 2013, 13:02:35 »

edit* I just saw that you will have another GB for metal cases in a couple weeks, I'm gonna grab one of those instead. Thanks.

pichu23 · « **Reply #49 on:** Fri, 08 November 2013, 16:13:59 »

Waiting for the round edges and thin acrylic case pics before deciding.

News:

Author Topic: SPRIT Model 1 Case : Poker 60% 75% 87% 110% + Ducky, Filco, Leopold (Read 70304 times)