Recent Posts21
Interest Checks / Re: [IC] FRΛGMENT TKL - Artisan Resin Accents, 7000+ Configurations
« Last post by ABunchOfNumbers on Fri, 18 July 2025, 12:31:48 »Prototype v0.2.3
Prototype v0.2.3 is near-final, with only minor refinements remaining. The case colours Moss and Dune are confirmed. The resin pattern and design are final, though colour matching and variation control are still being improved.
This version tested a high-gloss resin-coated finish for the wooden components, but due to the difficulty and high failure rate of the process, production units will instead feature a matte wood finish. The internal mounting system is also being slightly revised, along with small changes to reduce manufacturing costs. The brass finish will be updated as the current clear coat wears too quickly.
This version tested a high-gloss resin-coated finish for the wooden components, but due to the difficulty and high failure rate of the process, production units will instead feature a matte wood finish. The internal mounting system is also being slightly revised, along with small changes to reduce manufacturing costs. The brass finish will be updated as the current clear coat wears too quickly.
Prototype v0.1.5
Prototype v0.1.5 serves as a proof of concept for FRΛGMENT. The top case features the final Frost colourway, while the bottom case uses an early Slate variant that won’t be offered. The resin accents were made using an older casting method, which has since been refined for improved depth and consistency in production. The resin in this unit also doesn’t perfectly match the case colour—this will be adjusted in future versions.
This prototype helped identify and resolve several issues, including case bowing, PCB alignment, and sound inconsistency from the backplate design. Further details and ongoing updates are available on the website.
This prototype helped identify and resolve several issues, including case bowing, PCB alignment, and sound inconsistency from the backplate design. Further details and ongoing updates are available on the website.
Mounting Systems
Plateless Gummy O-Ring
FRΛGMENT utilizes an improved version of the gummy O-ring system used in the QUΛNTUM60, addressing every aspect for improved performance. The new design features a fully custom O-ring with molded-in standoffs that pass through the PCB. Dual-material clips secure the O-ring from above - the soft material aligns with the case to reduce resonance, while the hard material ensures the O-ring stays firmly in place. Additionally, the latest revision maintains compatibility with both plate and plateless configurations while significantly simplifying assembly, requiring the removal of just seven screws to remove the PCB assembly.
*Subject to change – final implementation pending prototype part testing.*
Top Mount
FRΛGMENT utilizes an improved version of the gummy O-ring system used in the QUΛNTUM60, addressing every aspect for improved performance. The new design features a fully custom O-ring with molded-in standoffs that pass through the PCB. Dual-material clips secure the O-ring from above - the soft material aligns with the case to reduce resonance, while the hard material ensures the O-ring stays firmly in place. Additionally, the latest revision maintains compatibility with both plate and plateless configurations while significantly simplifying assembly, requiring the removal of just seven screws to remove the PCB assembly.
*Subject to change – final implementation pending prototype part testing.*
Top Mount
For those who prefer a firmer, more traditional typing experience, FRΛGMENT also supports a top-mount configuration.
Internal Screws
FRΛGMENT utilizes seven magnetic screws positioned above the plate at a 45° angle. Unlike conventional hidden screw designs, which can be difficult to reach internally, this system keeps everything easily accessible from above making assembly and disassembly quicker and easier.
PCB Layouts
Sound Test
Links
Website: abunchofnumbers.com
Discord
Discord
