Author Topic: [IC] Fox Lab PCBs reproduction  (Read 5481 times)

0 Members and 1 Guest are viewing this topic.

Online senter

  • * Maker
  • Thread Starter
  • Posts: 797
  • Location: Shenzhen, China or Washington, D.C.
[IC] Fox Lab PCBs reproduction
« on: Thu, 02 May 2019, 14:13:12 »
This is an IC for reproducing all the previous Fox Lab PCBs including Orange 80, Time TKL, Orange 75, Leaf 80, and Leaf 60.

A round of PCBs can be manufactured whenever the MOQ for a certain PCB is met.

Please fill up this form if you need a replacement PCB for your Fox Lab boards.
Filling up this form does not guarantee you will receive the invoice in a short time.

Online LightningXI

  • * Elevated Elder
  • Posts: 2741
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [IC] Fox Lab PCBs reproduction
« Reply #1 on: Thu, 02 May 2019, 14:20:38 »
Is there any pricing information on these?
WANTED: Clacks, Artisans, Keysets, Vintage Cherry and Other Goodies

More
Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno


Online senter

  • * Maker
  • Thread Starter
  • Posts: 797
  • Location: Shenzhen, China or Washington, D.C.
Re: [IC] Fox Lab PCBs reproduction
« Reply #2 on: Thu, 02 May 2019, 14:27:18 »
Is there any pricing information on these?

I haven't got a formal quote yet but I plan to keep it about the same as the original price if not lower. This reproduction is not for profit. 

Online LightningXI

  • * Elevated Elder
  • Posts: 2741
  • Location: New York
  • PPD
    • ArtisanMacro
Re: [IC] Fox Lab PCBs reproduction
« Reply #3 on: Thu, 02 May 2019, 14:30:36 »
Is there any pricing information on these?

I haven't got a formal quote yet but I plan to keep it about the same as the original price if not lower. This reproduction is not for profit. 

Fantastic to hear! I might be in for a Leaf 80 PCB as they are also ALPS-compatible.

The Leaf 60 PCB is only compatible for the same board, right? It won't be cross-compatible with any other similar boards?
WANTED: Clacks, Artisans, Keysets, Vintage Cherry and Other Goodies

More
Quickfire Pro | TADA 68 | Novatouch | Whitefox | Octagon v1 | Blackbird | HHKB Pro 2 | KBD75 | VE.A | X60 | Canoe | HHKB Pro 1 | FJELL | Revo One | ALPS64 | Lightsaver v3 | IBM 5140 WKL | Realforce 87u | MIRA SE | Duck Poker | Canoe | Moon | Weaven | M65-A | EXENT | Wooden Planck | Tokyo60| Viper v1 | E6-v2 | IBM SSK | CA66 | TX-CP | SINGA | TGR Alice | FJELL R2 | Klippe | JER-A06 | GSKT-00 | M60-A | Realforce 84u | AL1 | Keycult No. 1 | SaiB-CP | G81-3077SAU | DC60 | Realforce 84ub | TMO50 | G80-1800 | Leaf 80 | LZ GH-v2 | T60 | LZ MP | KMAC Happy | TGR-910RE (Al) | TGR-910RE (PC) | SKB60 | UNIKORN | TGR Jane v2 | Xeno


Offline Zuology

  • Posts: 257
  • Location: Mass-hole
  • Why does this rabbit-hole have so many side-quests
Re: [IC] Fox Lab PCBs reproduction
« Reply #4 on: Thu, 02 May 2019, 15:06:30 »
Hello - somewhat unrelated, but was interested in having another plate cut for my Orange 80. Any chance you could share file or consider doing plate retro plate run , also?
More
75%: Scarlet Bandana (TBD) | Singa75 Polycarb (TBD) | SKB75 (TBD) | YMD75 (Box Navy) | XD84 (Outemu Ice) | Plum84 (BKE Redux Heavy)
TKL: ALF X1.1 SE (TBD) | LZ Iron White (TBD) | Fox Labs Orange (TBD) | Alu WASDv2 (Cherry Green) | MechkeyAlpha MA87 (Kailh Box Burnt Orange) | Archon RE:AL Superior EX (Nopre 65g)
Full+: Clueboard Double 1800 (Vint Clears) | IBM Model M | IBM Model F XT

Offline Vigrith

  • Posts: 1622
Re: [IC] Fox Lab PCBs reproduction
« Reply #5 on: Thu, 02 May 2019, 17:00:47 »
Very happy to see this, Senter. I'm having a couple Time plates cut for me as we spoke about over email a few months ago, this makes my life quite a bit easier.

Submitted for a Time PCB (may add another when the MOQ has been reached) as well as an extra for my Leaf 60 since I forgot to get one during GB and I probably shouldn't gamble on that.

Offline crd

  • Posts: 50
  • Location: SFBA
  • Discord: crd#7617
Re: [IC] Fox Lab PCBs reproduction
« Reply #6 on: Fri, 03 May 2019, 09:00:57 »
Will these be compatible with QMK?

Offline merlin64

  • Posts: 1241
  • Location: Seattle, WA
    • MechMerlin
Re: [IC] Fox Lab PCBs reproduction
« Reply #7 on: Fri, 03 May 2019, 12:51:48 »
@Senter

I would be happy to help get all these boards into qmk_firmware/QMK Configurator for both the native QMK pcb and boot mapper ones. If you're interested please shoot me a message =).

Online vtachkov

  • Posts: 192
Re: [IC] Fox Lab PCBs reproduction
« Reply #8 on: Fri, 03 May 2019, 13:06:23 »
Could you also do the plates as well?

Offline wholypantalones

  • Posts: 649
Re: [IC] Fox Lab PCBs reproduction
« Reply #9 on: Fri, 03 May 2019, 13:28:17 »
Could you also do the plates as well?

Even making the plate files available would be handy.

Offline Zuology

  • Posts: 257
  • Location: Mass-hole
  • Why does this rabbit-hole have so many side-quests
Re: [IC] Fox Lab PCBs reproduction
« Reply #10 on: Fri, 03 May 2019, 14:38:14 »
Could you also do the plates as well?

Even making the plate files available would be handy.

Yeah I'd be happy to foot the cost and take on the process myself if plate files were made available. Just didn't know which option Senter preferred, if at all, they are his work.
More
75%: Scarlet Bandana (TBD) | Singa75 Polycarb (TBD) | SKB75 (TBD) | YMD75 (Box Navy) | XD84 (Outemu Ice) | Plum84 (BKE Redux Heavy)
TKL: ALF X1.1 SE (TBD) | LZ Iron White (TBD) | Fox Labs Orange (TBD) | Alu WASDv2 (Cherry Green) | MechkeyAlpha MA87 (Kailh Box Burnt Orange) | Archon RE:AL Superior EX (Nopre 65g)
Full+: Clueboard Double 1800 (Vint Clears) | IBM Model M | IBM Model F XT

Offline lovetree

  • Posts: 146
Re: [IC] Fox Lab PCBs reproduction
« Reply #11 on: Fri, 03 May 2019, 22:37:33 »
What a great timing! I just needed a PCB for Time TKL because my previous one had broken.
Thanks Senter for doing this!

Offline kk3659

  • Posts: 1
Re: [IC] Fox Lab PCBs reproduction
« Reply #12 on: Sat, 04 May 2019, 09:01:29 »
I am very grateful to you for this ic.
It was something I really wanted and I will wait even if it takes a long time!

Online senter

  • * Maker
  • Thread Starter
  • Posts: 797
  • Location: Shenzhen, China or Washington, D.C.
Re: [IC] Fox Lab PCBs reproduction
« Reply #13 on: Sat, 04 May 2019, 12:54:12 »

Fantastic to hear! I might be in for a Leaf 80 PCB as they are also ALPS-compatible.

The Leaf 60 PCB is only compatible for the same board, right? It won't be cross-compatible with any other similar boards?

Leaf 60 PCB is not compatible with any known boards.

Online senter

  • * Maker
  • Thread Starter
  • Posts: 797
  • Location: Shenzhen, China or Washington, D.C.
Re: [IC] Fox Lab PCBs reproduction
« Reply #14 on: Sat, 04 May 2019, 12:55:21 »
Hello - somewhat unrelated, but was interested in having another plate cut for my Orange 80. Any chance you could share file or consider doing plate retro plate run , also?

Pm me your email address then I'll send you the files. The plate files of ALL Fox Lab designs are available for sharing.

Online senter

  • * Maker
  • Thread Starter
  • Posts: 797
  • Location: Shenzhen, China or Washington, D.C.
Re: [IC] Fox Lab PCBs reproduction
« Reply #15 on: Sat, 04 May 2019, 12:59:09 »
@Senter

I would be happy to help get all these boards into qmk_firmware/QMK Configurator for both the native QMK pcb and boot mapper ones. If you're interested please shoot me a message =).

Really appreciate it. I'll get in contact with you later.

Offline wholypantalones

  • Posts: 649
Re: [IC] Fox Lab PCBs reproduction
« Reply #16 on: Sat, 04 May 2019, 20:26:37 »
Hello - somewhat unrelated, but was interested in having another plate cut for my Orange 80. Any chance you could share file or consider doing plate retro plate run , also?

Pm me your email address then I'll send you the files. The plate files of ALL Fox Lab designs are available for sharing.

Share them here so everyone doesn't have to email you?

Offline Jinnnxxu

  • Posts: 74
  • U only live once
Re: [IC] Fox Lab PCBs reproduction
« Reply #17 on: Sat, 04 May 2019, 21:51:28 »
 :cool: :cool: :cool:  GL!
Ins: Jinnnxxu     Discord:Jinnnxxu#9644    
Exclusive: E8V1 | E7V1 x14 | E7-VX | E6V2 x1 | E6V2 PE x7 | E6.5 x9 | E7SE x3
Matrix: 1.0 | 1.2 | Abel | Abel+ | Cain | 2.0 x8 | 2.2 x8 | Abel-x x3 | M6 x2 | 1.2OG x11 | Project F x2
Rama: M60-A x4 | M65-A x2 | M6-A 88edition | M6-B | KOYU x3 | M60-A SEQ2 X4 | M6-C x2 | U80 x5
Percent: Canoe x3 | Maze x2 | Skog lite | Canoe FE x2
FOX: Leaf 80 x2 | Leaf 60 x4      TGR:Jane V2 | 910RE | Jane V2 CE x2
Others: Mira SE x2 | Jermini | C225 x2 | INETT Cross x2 | Kira 80 | Kira 60 | Zephyr 65 R2 | Space 65 x2 | Volcano 660 x2 | INETT Square x5 | FMJ 80 x2 | Keycult No.2 x2

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11158
  • Location: Campaign Trail
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC] Fox Lab PCBs reproduction
« Reply #18 on: Sat, 04 May 2019, 22:04:15 »
don't personally have a need for this since i unfortunately don't have a foxlab board but i would support more people doing stuff like this
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Daily driver: TGR Alice

Everything you have said in the past has been false so I will keep my hope.

Offline Bizpit

  • Posts: 24
  • Location: Australia
Re: [IC] Fox Lab PCBs reproduction
« Reply #19 on: Thu, 09 May 2019, 09:53:55 »
Looks good. My Orange75 PCB died and I didn't get an extra; hopefully this goes through so I can get two!

Offline ArchDill

  • * Esteemed Elder
  • Posts: 1250
  • Location: OK
Re: [IC] Fox Lab PCBs reproduction
« Reply #20 on: Thu, 09 May 2019, 09:56:04 »
Would love the option to get plates too!

Offline Zuology

  • Posts: 257
  • Location: Mass-hole
  • Why does this rabbit-hole have so many side-quests
Re: [IC] Fox Lab PCBs reproduction
« Reply #21 on: Thu, 09 May 2019, 11:35:07 »
Would love the option to get plates too!

I was sent the files for Orange 80 plates if anyone would like them, you can PM me if you don't want to bother Senter :)
More
75%: Scarlet Bandana (TBD) | Singa75 Polycarb (TBD) | SKB75 (TBD) | YMD75 (Box Navy) | XD84 (Outemu Ice) | Plum84 (BKE Redux Heavy)
TKL: ALF X1.1 SE (TBD) | LZ Iron White (TBD) | Fox Labs Orange (TBD) | Alu WASDv2 (Cherry Green) | MechkeyAlpha MA87 (Kailh Box Burnt Orange) | Archon RE:AL Superior EX (Nopre 65g)
Full+: Clueboard Double 1800 (Vint Clears) | IBM Model M | IBM Model F XT

Offline moonmembrane

  • Posts: 21
Re: [IC] Fox Lab PCBs reproduction
« Reply #22 on: Sat, 11 May 2019, 07:56:48 »
I'd like another pcb or two for my Orange75

Offline InvidiousIgnoramus

  • Posts: 340
  • Location: Columbia, SC
Re: [IC] Fox Lab PCBs reproduction
« Reply #23 on: Mon, 13 May 2019, 16:01:07 »
I actually need a new pcb for my Orange Pad. It just stopped working one day, and I haven't been able to get it to work since.
I long for the day when I find a beamspring. (At a not insane price)

Offline 0sirisTV

  • Posts: 10
Re: [IC] Fox Lab PCBs reproduction
« Reply #24 on: Mon, 13 May 2019, 17:08:26 »
Bought an Orange 75 second hand and would love to have a backup pcb and possibly switch over to a brass plate if you ever plan on running plates/hardware as well.

Offline resonantarchitect

  • Posts: 6
  • Location: US-OH
Re: [IC] Fox Lab PCBs reproduction
« Reply #25 on: Tue, 28 May 2019, 07:08:40 »
In for 1 Orange75 PCB. WOuld definitely be in for an OrangePad PCB as well if they were offered.

Also after plates for both Orange75 & OrangePad.

Thanks so much for setting this up for the current PCBs! Been having trouble finding Orange75 pcbs in the wild.

Offline ramblinrose

  • Posts: 97
Re: [IC] Fox Lab PCBs reproduction
« Reply #26 on: Tue, 28 May 2019, 12:44:04 »
Did anyone get the orange 75 plate files already?

Offline notice

  • Posts: 6
Re: [IC] Fox Lab PCBs reproduction
« Reply #27 on: Wed, 05 June 2019, 04:08:25 »
My orange80 pcb died. I think it is the usb connector that was damaged by one of the custom usb cable you can buy on massdrop.

I am going to try to repair it but I could use a new one just in case I fail.

Offline 0sirisTV

  • Posts: 10
Re: [IC] Fox Lab PCBs reproduction
« Reply #28 on: Fri, 28 June 2019, 12:55:24 »
Any updates on this? Would definitely want 2 Orange 75 pbcs and 2 Leaf 60 pcbs.

Sent from my Pixel 2 XL using Tapatalk


Offline ilikerustoo

  • Posts: 5
  • Location: PA, USA
Re: [IC] Fox Lab PCBs reproduction
« Reply #29 on: Sun, 11 August 2019, 10:36:09 »
Would definitely want one or two universal PCBs for the leaf60

Offline SingSong

  • Posts: 29
Re: [IC] Fox Lab PCBs reproduction
« Reply #30 on: Tue, 13 August 2019, 01:05:44 »
If ever the Fox Lab Orange 75 gets rerun, I'm in. Missing out on getting that in the green color is one of the few keyboard regrets I've ever had.

Offline Bizpit

  • Posts: 24
  • Location: Australia
Re: [IC] Fox Lab PCBs reproduction
« Reply #31 on: Sat, 05 October 2019, 04:49:56 »
Any news on how close each PCB is to the MOQ for a re-run?

Offline HWHobby

  • Posts: 3
  • Location: Los Angeles, California
Re: [IC] Fox Lab PCBs reproduction
« Reply #32 on: Mon, 14 October 2019, 00:55:52 »
Filled out the form for a couple of Orange75 PCBs. My Orange75 had a mishap with the USB port getting broken off, would gladly buy a replacement and a spare!