Author Topic: [GB]Theo 60% custome keyboard (invoice check)  (Read 15202 times)

0 Members and 1 Guest are viewing this topic.

Offline wylie

  • Thread Starter
  • Posts: 41
[GB]Theo 60% custome keyboard (invoice check)
« on: Tue, 10 December 2019, 09:00:34 »
Hi geekhack,

Groupbuy for - Theo60.

This is the first time that I am sharing my personal design.I thought about what would make my perfect keyboard? With a few ideas in
mind, below is some pictures












Some details about this keyboard :     (IC:https://geekhack.org/index.php?topic=101403.0)
             
                                                                   Top case : Four kinds of top case https://i.imgur.com/r9OAxPs.png .

                                                             (alu/ pc/brass pvd /brass sand finish.You can mix choices,we have brass top and bottom to
                                                                   
                                                                    choose.)
                                                           
                                                 Default kit:
                                                                       Aluminum/PC/ top and bottom cases
                                                                       
                                                                       Aluminum/PC/ plate
                                                                       
                                                                       QMK PCB with type-C
                                                                       
                                                                       Aluminum/PC/ bottom
                                                                       
                                                                       O- rubber (two types), screws, custom box
                                                                       
                                                                       Price for default kit: $280 excluding PayPal fee and shipping
Solder PCB: add HHKB layout


Hotswap pcb :



Alps :


                                                             
layout 3:






Mounting. :



The plate is mounted to the top case with the 'O- rubber '

Do not like "Gasket" mount, we have the 'O-rubber' Cutout,when the 'O-rubber' put  on the top & bottom of the case.  the plate will

experience a stronger or lighter clamping force.When you type through the plate will get fedback from bottom due to the 'O

-rubber get press .we will provide two types O-rubber for free.

More

Typing test :

 



                                              Groupbuy open :10th Dec - 15th Dec (30units)

                                              Groupbuy payment :deadline 20th Dec

                                              ETA         :early April 2020  shipping cost $45-$50(invoice  will send when start shpping)
« Last Edit: Sun, 22 December 2019, 02:02:58 by wylie »

Offline Mcnos

  • Posts: 894
    • GMK Fuyu
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #1 on: Tue, 10 December 2019, 22:31:15 »
What kind of angle and front height does this board have? I didn't see it in the IC

I would appreciate a side shot to see how it sits on the desk
« Last Edit: Tue, 10 December 2019, 22:33:28 by Mcnos »

Offline Warrenified

  • Posts: 96
  • Location: California, United States
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #2 on: Tue, 10 December 2019, 22:39:38 »
Submitted my order!

Thanks! I added you on discord in case I need to change my form if I was in the first 30!
« Last Edit: Tue, 10 December 2019, 22:49:08 by Warrenified »

Offline aslanxdeft

  • Posts: 42
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #3 on: Wed, 11 December 2019, 03:11:11 »
Are there any examples of the other colors?

Offline modeseven

  • Posts: 59
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #4 on: Wed, 11 December 2019, 05:54:51 »
What kind of angle and front height does this board have? I didn't see it in the IC

I would appreciate a side shot to see how it sits on the desk

He mentioned 6 degrees in the past. Also interested in seeing side profile and front height.

Offline wylie

  • Thread Starter
  • Posts: 41
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #5 on: Wed, 11 December 2019, 08:48:29 »
Are there any examples of the other colors?


Offline aslanxdeft

  • Posts: 42
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #6 on: Wed, 11 December 2019, 10:50:44 »
Are there any examples of the other colors?

Show Image

Thanks! Is the top color "e pink"?

Offline gnhuy91

  • Posts: 64
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #7 on: Wed, 11 December 2019, 12:07:43 »
In for an Alps version, I hope Alps switch legs would not touch the bottom of the case like Leaf60

Offline kaz_kitty

  • Posts: 2
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #8 on: Wed, 11 December 2019, 15:21:16 »
Submitted for a full PC, most likely won't get it though...Is it even a GB when there is only 30 units?

Offline DukeEsquire

  • Posts: 263
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #9 on: Wed, 11 December 2019, 17:00:57 »
Submitted for a full PC, most likely won't get it though...Is it even a GB when there is only 30 units?

You want caps for first time GB runners.

You don't want someone whose in over their heads.

Offline nasp

  • Posts: 797
  • Location: USA - Texas
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #10 on: Wed, 11 December 2019, 17:07:43 »
Submitted for a full PC, most likely won't get it though...Is it even a GB when there is only 30 units?

You want caps for first time GB runners.

You don't want someone whose in over their heads.


Agreed. And 30 is a good number.

Offline sumbody

  • Posts: 8
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #11 on: Wed, 11 December 2019, 17:51:35 »
Submitted for a full PC board. Good luck to the rest in the GB.

Offline Felt

  • Posts: 10
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #12 on: Wed, 11 December 2019, 18:39:13 »
Just submitted. Has the 30 units already been reached?

Offline Skeezy

  • Posts: 5
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #13 on: Wed, 11 December 2019, 20:12:46 »
Just filled out the form.

When will we be notified if we got in or not?
« Last Edit: Wed, 11 December 2019, 20:15:59 by Skeezy »

Offline Little4Real

  • Posts: 64
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #14 on: Wed, 11 December 2019, 23:57:40 »
Will a standard 60% PCB fit?

Offline aslanxdeft

  • Posts: 42
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #15 on: Thu, 12 December 2019, 06:58:35 »
Just filled out the form.

When will we be notified if we got in or not?
It's fcfs so I guess if you filled out the form you got it.

Offline wylie

  • Thread Starter
  • Posts: 41
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #16 on: Thu, 12 December 2019, 08:43:56 »
Just filled out the form.

When will we be notified if we got in or not?
  we will send invioce when the gb form closed by the time,and if you have received and paid, you are in .if not,we will move to next members.thank you.

Offline wylie

  • Thread Starter
  • Posts: 41
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #17 on: Thu, 12 December 2019, 08:44:20 »
Will a standard 60% PCB fit?
   not fit.

Offline wylie

  • Thread Starter
  • Posts: 41
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #18 on: Thu, 12 December 2019, 08:46:08 »
What kind of angle and front height does this board have? I didn't see it in the IC

I would appreciate a side shot to see how it sits on the desk
    side view:
                 

Offline gnhuy91

  • Posts: 64
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #19 on: Thu, 12 December 2019, 11:27:14 »
What kind of angle and front height does this board have? I didn't see it in the IC

I would appreciate a side shot to see how it sits on the desk
    side view:
                 
Show Image


Have you tried Alps on this prototype? I asked because the switch legs is longer than mx and may touch the bottom case, happened to Leaf60

Offline wylie

  • Thread Starter
  • Posts: 41
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #20 on: Fri, 13 December 2019, 06:42:39 »
What kind of angle and front height does this board have? I didn't see it in the IC

I would appreciate a side shot to see how it sits on the desk
    side view:
                 
Show Image

 

Have you tried Alps on this prototype? I asked because the switch legs is longer than mx and may touch the bottom case, happened to Leaf60
   yes,I will try again

Offline wylie

  • Thread Starter
  • Posts: 41
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #21 on: Fri, 13 December 2019, 06:44:20 »
I will start  sending invoice. If you have any questions, please pm me (or discord).

Offline kaz_kitty

  • Posts: 2
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #22 on: Fri, 13 December 2019, 09:08:41 »
Paid and hyped, can't wait to receive it :)

Offline sumbody

  • Posts: 8
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #23 on: Fri, 13 December 2019, 09:54:32 »
I will start  sending invoice. If you have any questions, please pm me (or discord).

All paid up and sent you a PM :)
Can't wait!

Offline gnhuy91

  • Posts: 64
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #24 on: Fri, 13 December 2019, 10:55:29 »
Paid for mine too, Alps build with extra PCB + mx PC plate so I can swap between alps and mx :D

Offline Felt

  • Posts: 10
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #25 on: Fri, 13 December 2019, 12:24:06 »
Just paid! Love the simplicity of this board and different mounting style, cant wait!

Offline Mcnos

  • Posts: 894
    • GMK Fuyu
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #26 on: Fri, 13 December 2019, 12:32:55 »
Sent a PM about my order

Offline modeseven

  • Posts: 59
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #27 on: Fri, 13 December 2019, 14:19:24 »
In the pictures there seems to be a pretty large gap between the WKL blockers and the ALT keys. Do you know if this will be changed or is this the final design?

Offline Warrenified

  • Posts: 96
  • Location: California, United States
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #28 on: Fri, 13 December 2019, 18:20:09 »
Hi! I wanted to add a PC plate to my invoice. Ive PMd you on discord and Geekhack just in case. Thank you!

Offline sumbody

  • Posts: 8
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #29 on: Fri, 13 December 2019, 18:23:19 »
Anyone has an idea how heavy will a full PC build be?
Which one is the weight in the keyboard? Can't seem to make out the component from the images.

Offline nasp

  • Posts: 797
  • Location: USA - Texas
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #30 on: Fri, 13 December 2019, 20:51:20 »
Check out the fourth image. It's the one with the white Theo on its back. That red piece is the "weight". It's more of an accent really.

Offline sumbody

  • Posts: 8
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #31 on: Fri, 13 December 2019, 21:59:32 »
Check out the fourth image. It's the one with the white Theo on its back. That red piece is the "weight". It's more of an accent really.

I expect the full PC to be really light I guess, perfect for a travel board

Offline wylie

  • Thread Starter
  • Posts: 41
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #32 on: Sat, 14 December 2019, 01:10:10 »
In the pictures there seems to be a pretty large gap between the WKL blockers and the ALT keys. Do you know if this will be changed or is this the final design?
it will change,this is just prototype

Offline wylie

  • Thread Starter
  • Posts: 41
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #33 on: Sat, 14 December 2019, 01:10:59 »
3 requests cancelled the order.

Offline wylie

  • Thread Starter
  • Posts: 41
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #34 on: Sat, 14 December 2019, 01:11:46 »
Hi! I wanted to add a PC plate to my invoice. Ive PMd you on discord and Geekhack just in case. Thank you!
  check. :thumb:

Offline wylie

  • Thread Starter
  • Posts: 41
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #35 on: Sun, 15 December 2019, 21:46:36 »
Hi geekhack,

Groupbuy for - Theo60.

This is the first time that I am sharing my personal design.I thought about what would make my perfect keyboard? With a few ideas in
mind, below is some pictures

Show Image


Show Image


Show Image


Show Image


Show Image



Some details about this keyboard :     (IC:https://geekhack.org/index.php?topic=101403.0)
             
                                                                   Top case : Four kinds of top case https://i.imgur.com/r9OAxPs.png .

                                                             (alu/ pc/brass pvd /brass sand finish.You can mix choices,we have brass top and bottom to
                                                                   
                                                                    choose.)
                                                           
                                                 Default kit:
                                                                       Aluminum/PC/ top and bottom cases
                                                                       
                                                                       Aluminum/PC/ plate
                                                                       
                                                                       QMK PCB with type-C
                                                                       
                                                                       Aluminum/PC/ bottom
                                                                       
                                                                       O- rubber (two types), screws, custom box
                                                                       
                                                                       Price for default kit: $280 excluding PayPal fee and shipping
Solder PCB: add HHKB layout
Show Image


Hotswap pcb :

Show Image


Alps :

Show Image

                                                             
layout 3:

Show Image





Mounting. :

Show Image


The plate is mounted to the top case with the 'O- rubber '

Do not like "Gasket" mount, we have the 'O-rubber' Cutout,when the 'O-rubber' put  on the top & bottom of the case.  the plate will

experience a stronger or lighter clamping force.When you type through the plate will get fedback from bottom due to the 'O

-rubber get press .we will provide two types O-rubber for free.

More
Show Image

Typing test :

 



                                              Groupbuy open :10th Dec - 15th Dec (30units)

                                              Groupbuy payment :deadline 20th Dec

                                              ETA         :early April 2020  shipping cost $45-$50(invoice  will send when start shpping)

Offline Tamkarm

  • Posts: 1
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #36 on: Mon, 16 December 2019, 13:39:03 »
Sent a PM

Offline jacky

  • Posts: 289
  • Location: UK
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #37 on: Tue, 17 December 2019, 10:19:58 »
 :thumb:

Offline regionfree

  • Posts: 291
  • Location: Sa kagubatan
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #38 on: Wed, 18 December 2019, 17:54:48 »
finally settled my invoice!

Offline wylie

  • Thread Starter
  • Posts: 41
Re: [GB]Theo 60% custome keyboard (30units FCFS)
« Reply #39 on: Thu, 19 December 2019, 04:25:50 »
All invoices have been sent for a few days,please check it,if have any question pm me.(deadline is on 20th Dec.)

Offline nasp

  • Posts: 797
  • Location: USA - Texas
Re: [GB]Theo 60% custome keyboard (invoice check)
« Reply #40 on: Fri, 27 December 2019, 21:31:00 »
Hello sir,

Can you please send the plate file? I'd like to use this board with a custom layout.


Thanks

Offline aslanxdeft

  • Posts: 42
Re: [GB]Theo 60% custome keyboard (invoice check)
« Reply #41 on: Wed, 08 January 2020, 07:08:01 »
Any updates ?  :)

Offline wylie

  • Thread Starter
  • Posts: 41
Re: [GB]Theo 60% custome keyboard (invoice check)
« Reply #42 on: Wed, 08 January 2020, 21:25:12 »
Any updates ?  :)
waiting for new prototype make confirmed.

Offline sumbody

  • Posts: 8
Re: [GB]Theo 60% custome keyboard (invoice check)
« Reply #43 on: Tue, 21 January 2020, 08:47:49 »
Are we on track for April 2020 release still?

Offline aslanxdeft

  • Posts: 42
Re: [GB]Theo 60% custome keyboard (invoice check)
« Reply #44 on: Sun, 02 February 2020, 06:29:00 »
Any news on the prototype?

Offline Vireca

  • Posts: 138
Re: [GB]Theo 60% custome keyboard (invoice check)
« Reply #45 on: Sun, 02 February 2020, 10:30:27 »
GB before prototype? wew

Offline nasp

  • Posts: 797
  • Location: USA - Texas
Re: [GB]Theo 60% custome keyboard (invoice check)
« Reply #46 on: Mon, 03 February 2020, 21:32:07 »
GB before prototype? wew

No, he has a typing test video in the OP