Author Topic: [IC] hiney tkl one  (Read 59977 times)

0 Members and 1 Guest are viewing this topic.

Offline DALExSNAIL

  • The User Formerly Known as 'Formerly DudeSnail'
  • * Esteemed Elder
  • Posts: I am a geek!!
  • Location: Myrtle Beach, SC
  • 𝖋𝖚𝖈𝖐 𝖆𝖑𝖕𝖘
Re: [IC] hiney tkl one
« Reply #100 on: Thu, 20 February 2020, 19:33:36 »
daughter boards cuck tier tbqh

Offline Midori

  • Formerly loktrevor
  • Posts: 87
  • Location: Los Angeles, CA
  • c:
Re: [IC] hiney tkl one
« Reply #101 on: Thu, 20 February 2020, 19:37:08 »
Quote from:  link=topic=104750.msg2867628#msg2867628 date=1582248058
I don't like how high the port sits. I think it'd be better with a daughterboard.
Agreed, but still a very handsome board

constexpr mrkantz tkl one
      

TGR Jane v2 | Keycult No2 rev1 | Matrix 8X v2.0 | Bean | KFE

Offline Krelbit

  • Posts: 292
  • Location: Minnesota
  • Switchmod.net
    • Switchmod
Re: [IC] hiney tkl one
« Reply #102 on: Thu, 20 February 2020, 19:38:12 »
hiney got a pretty nice ass

he kinda bad

would cop a feel

nice keyboard or whatever

Offline hineybush

  • * Maker
  • Thread Starter
  • Posts: 1386
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [IC] hiney tkl one
« Reply #103 on: Thu, 20 February 2020, 19:38:56 »
hiney got a pretty nice ass

he kinda bad

would cop a feel

nice keyboard or whatever

few know this

Offline SirShakes

  • Posts: 26
  • Location: SoCal
Re: [IC] hiney tkl one
« Reply #104 on: Thu, 20 February 2020, 19:41:32 »
I don't like how high the port sits. I think it'd be better with a daughterboard.

no

Offline Rumai

  • Posts: 56
Re: [IC] hiney tkl one
« Reply #105 on: Thu, 20 February 2020, 19:46:13 »
yesyes

Offline mrkantz

  • Posts: 184
  • Location: SD
Re: [IC] hiney tkl one
« Reply #106 on: Thu, 20 February 2020, 19:47:00 »
Quote from:  link=topic=104750.msg2867628#msg2867628 date=1582248058
I don't like how high the port sits. I think it'd be better with a daughterboard.
Agreed, but still a very handsome board

constexpr mrkantz tkl one
Sounds lame, what if we ditch the daughter board and move the port up?

Offline megaforce

  • Posts: 1028
Re: [IC] hiney tkl one
« Reply #107 on: Thu, 20 February 2020, 19:56:35 »
oh HELLLLLL yeah

Corsair K63 Wireless | Razer Huntsman Elite
More
910 CE | Jane V2 | Jane V2 CE | Nunu | TKL-My Little Demon | Hokusai | Nunu FE
LZ MX | LZ FE | LZ CLS TKL Silver |LZ CLS TKL Gray| LZ St | V.EA | Blackbird | LSV3 | OctagonV2 | Norbatouch | X60 | TX84 | Kyuu | SSK | 268.1| Jane CE | Corsair K95 | X60R | | HHKB JP x JS HiPro  |

Offline FunTyme

  • Formerly known as Edrylle
  • Posts: 40
  • Location: Nevada, USA
Re: [IC] hiney tkl one
« Reply #108 on: Thu, 20 February 2020, 20:21:03 »
I like this
QXP | HBCP | T60 | IDB60 | TGR Jane v2 CE | bob

Offline MeloDet

  • Posts: 197
Re: [IC] hiney tkl one
« Reply #109 on: Thu, 20 February 2020, 20:28:20 »
The light gold is hot

Offline DALExSNAIL

  • The User Formerly Known as 'Formerly DudeSnail'
  • * Esteemed Elder
  • Posts: I am a geek!!
  • Location: Myrtle Beach, SC
  • 𝖋𝖚𝖈𝖐 𝖆𝖑𝖕𝖘
Re: [IC] hiney tkl one
« Reply #110 on: Thu, 20 February 2020, 20:36:13 »
Ending this debate right now.

236086-0

Offline blitz

  • Posts: 15
Re: [IC] hiney tkl one
« Reply #111 on: Thu, 20 February 2020, 20:44:34 »
Ending this debate right now.

(Attachment Link)
Wtf I actually want that


Sent from my iPhone using Tapatalk

Offline BigLeageChew

  • Posts: 8
Re: [IC] hiney tkl one
« Reply #112 on: Thu, 20 February 2020, 21:24:17 »
Yes WKL tenkeyless! That purple is beautiful.

Offline lolafineday

  • Posts: 274
Re: [IC] hiney tkl one
« Reply #113 on: Thu, 20 February 2020, 21:25:04 »
Front height?

Sent from my SM-G975F using Tapatalk


Offline hineybush

  • * Maker
  • Thread Starter
  • Posts: 1386
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [IC] hiney tkl one
« Reply #114 on: Thu, 20 February 2020, 21:37:20 »
Front height?

Sent from my SM-G975F using Tapatalk

idk i think like 18 or 19, im not too worried about that measurement however

Offline eniigma

  • Posts: 479
  • Location: USA
    • Storefront:
Re: [IC] hiney tkl one
« Reply #115 on: Thu, 20 February 2020, 23:31:49 »
pretty. i want

Sent from my SM-G973U using Tapatalk


Offline hineybush

  • * Maker
  • Thread Starter
  • Posts: 1386
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [IC] hiney tkl one
« Reply #116 on: Thu, 20 February 2020, 23:50:47 »
Front height?

Sent from my SM-G975F using Tapatalk

idk i think like 18 or 19, im not too worried about that measurement however


Offline jedidood

  • Posts: 42
  • Location: Canada
  • aka neovisual
Re: [IC] hiney tkl one
« Reply #117 on: Fri, 21 February 2020, 02:51:31 »
I am all for the ploy, make it happen please!

Offline hicals

  • Posts: 15
Re: [IC] hiney tkl one
« Reply #118 on: Fri, 21 February 2020, 03:15:04 »
Can I increase the quantity of products?

Offline MatthewPham

  • Posts: 31
Re: [IC] hiney tkl one
« Reply #119 on: Fri, 21 February 2020, 19:46:28 »

Offline Kinesiologist

  • Posts: 40
Re: [IC] hiney tkl one
« Reply #120 on: Fri, 21 February 2020, 20:17:05 »
can you kindly please explain what is burger mount?

Offline hineybush

  • * Maker
  • Thread Starter
  • Posts: 1386
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [IC] hiney tkl one
« Reply #121 on: Fri, 21 February 2020, 20:20:54 »
can you kindly please explain what is burger mount?

o ring between plate and case for isolation, helps with sound


Sent from my iPhone using Tapatalk

Offline lolafineday

  • Posts: 274
Re: [IC] hiney tkl one
« Reply #122 on: Fri, 21 February 2020, 21:00:56 »
can you kindly please explain what is burger mount?

o ring between plate and case for isolation, helps with sound


Sent from my iPhone using Tapatalk
Edible?

Sent from my SM-G975F using Tapatalk


Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11464
  • Location: RSTLN E
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC] hiney tkl one
« Reply #123 on: Fri, 21 February 2020, 22:00:43 »
can you kindly please explain what is burger mount?

o ring between plate and case for isolation, helps with sound


Sent from my iPhone using Tapatalk
Edible?

Sent from my SM-G975F using Tapatalk

anything is if your insurance is good enough
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice

if you're actually reading other people's posts on geekhack in 2020 you're doing something wrong

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos | "Is Linkshine our Nixon?" -NAV (fk u)

Offline bthezebra

  • Posts: 430
Re: [IC] hiney tkl one
« Reply #124 on: Fri, 21 February 2020, 23:56:57 »
Great work as always Hiney  :thumb:

Offline dantambok

  • Posts: 864
  • Location: Philippines
Re: [IC] hiney tkl one
« Reply #125 on: Sat, 22 February 2020, 01:49:34 »
Dont mind if i do
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / 2x Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / Keycult No. 1/60 / Hachi / Kyuu / Duck Orion V2 / 3x TGRxSinga Unikorn / QXP / TX1800 V1 /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / Rukia / 2x FMJ80 / TGR Jane V2 CE / UTD 360C / Matrix Project F / IDB60 / is0 

Coming soon --  MXSS / Modern M0110 / PC HBCP / Noxary 280S / Noxary XRF / LZ PhysiX / Keycult 1/60 rev1 / Lynx50 / Matrix 2.0 OG / 2x GSKT-00 / Duck Viper v3 / FLX Virgo / Noxary Vulcan Pro

40 ish sets and 30ish sets in GB

Offline neutralstate

  • Posts: 106
Re: [IC] hiney tkl one
« Reply #126 on: Sat, 22 February 2020, 02:41:49 »
my apologies, i am fairly new to this, but what is a closed buy and how does one get in?

Offline loud_asian

  • Posts: 578
Re: [IC] hiney tkl one
« Reply #127 on: Sat, 22 February 2020, 03:06:36 »
my apologies, i am fairly new to this, but what is a closed buy and how does one get in?

closed buy is like a friend's only groupbuy

Offline Zilliqa

  • Posts: 5
Re: [IC] hiney tkl one
« Reply #128 on: Sat, 22 February 2020, 03:07:06 »
hiney pls I want this. Love the machining detail on the front edge, and that purple :eek:

Offline Dafraz117

  • Posts: 38
Re: [IC] hiney tkl one
« Reply #129 on: Sat, 22 February 2020, 07:22:26 »
I really want this


Sent from my iPhone using Tapatalk

Offline tonny950111

  • Posts: 37
  • Location: US-NY
  • valar morghulis valar dohaeris
Re: [IC] hiney tkl one
« Reply #130 on: Sat, 22 February 2020, 08:21:56 »
Questions how to join the private GB ? Do you have a Discord channel ?

Offline Flexerman

  • Posts: 58
  • Location: UK
  • Thanks for all the fish
Re: [IC] hiney tkl one
« Reply #131 on: Sat, 22 February 2020, 08:45:46 »
very purty, love the colours.  :thumb:

Offline hineybush

  • * Maker
  • Thread Starter
  • Posts: 1386
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [IC] hiney tkl one
« Reply #132 on: Sat, 22 February 2020, 11:46:06 »
my apologies, i am fairly new to this, but what is a closed buy and how does one get in?

Questions how to join the private GB ? Do you have a Discord channel ?

yea it's already pretty much been decided soz

Offline frostfiree

  • Posts: 49
Re: [IC] hiney tkl one
« Reply #133 on: Sat, 22 February 2020, 11:51:50 »
That light purple is beautiful.
M65-A | Jane V2 | Jane V2 CE | Thermal | Lubrigante/Acrylic Alice | FC660C | HHKB | Kei | GSKT-00

Offline blitz

  • Posts: 15
Re: [IC] hiney tkl one
« Reply #134 on: Sat, 22 February 2020, 11:56:25 »
full run ETA, will do a proto run then then a public raffle/fcfs/vickrey sort of thing with like 30-40 units, no more than that likely. I do plan on doing multiple runs - goal is to do smaller but more frequent runs/buys, so drop new colors/etc every few months

Does this mean future GBs will be open to the public?

Offline hineybush

  • * Maker
  • Thread Starter
  • Posts: 1386
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [IC] hiney tkl one
« Reply #135 on: Sat, 22 February 2020, 11:58:18 »
full run ETA, will do a proto run then then a public raffle/fcfs/vickrey sort of thing with like 30-40 units, no more than that likely. I do plan on doing multiple runs - goal is to do smaller but more frequent runs/buys, so drop new colors/etc every few months

Does this mean future GBs will be open to the public?

yes, after proto run i will have public buys

Offline hineybush

  • * Maker
  • Thread Starter
  • Posts: 1386
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [IC] hiney tkl one
« Reply #136 on: Sat, 22 February 2020, 13:52:21 »


the anti flipper flip club official keyboard

Offline lolafineday

  • Posts: 274
Re: [IC] hiney tkl one
« Reply #137 on: Sat, 22 February 2020, 14:02:23 »
Show Image


the anti flipper flip club official keyboard
Hahaha love that!

Sent from my SM-G975F using Tapatalk


Offline rkarp

  • Posts: 122
  • Location: Pittsburgh, PA
    • hypertext.dev
Re: [IC] hiney tkl one
« Reply #138 on: Sat, 22 February 2020, 14:13:14 »
Show Image


the anti flipper flip club official keyboard

Having never designed or manufactured myself, what are the main reasons for low-batch runs?  If anybody could manufacture at scale with QC, it would be China, right?  There's clearly more work on your end with say a 500-run batch vs a 100 run batch, but aside from that, are there genuine manufacturing concerns with quality?  Upfront manufacturing deposits?  I'm starting to get the design itch....

Offline hineybush

  • * Maker
  • Thread Starter
  • Posts: 1386
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [IC] hiney tkl one
« Reply #139 on: Sat, 22 February 2020, 14:16:25 »
Show Image


the anti flipper flip club official keyboard

Having never designed or manufactured myself, what are the main reasons for low-batch runs?  If anybody could manufacture at scale with QC, it would be China, right?  There's clearly more work on your end with say a 500-run batch vs a 100 run batch, but aside from that, are there genuine manufacturing concerns with quality?  Upfront manufacturing deposits?  I'm starting to get the design itch....

so manufacturing isnt the problem. it's how much time i am willing to take out of my day (free time otherwise, usually, or time i spend designing stuff like this for myself and others) to QC, ship, deal with issues, etc.

it's easier and gives me more peace of mind to not deal with larger scale orders at once, because i like to live my life as well

Offline Zeelobby

  • Posts: 696
Re: [IC] hiney tkl one
« Reply #140 on: Sat, 22 February 2020, 14:45:40 »
Show Image


the anti flipper flip club official keyboard

Having never designed or manufactured myself, what are the main reasons for low-batch runs?  If anybody could manufacture at scale with QC, it would be China, right?  There's clearly more work on your end with say a 500-run batch vs a 100 run batch, but aside from that, are there genuine manufacturing concerns with quality?  Upfront manufacturing deposits?  I'm starting to get the design itch....
Trust me. The last thing you want is China QCing these boards. At least not as the sole QCers. And most designers don't make livable profits (or sometimes even profits) off their GBs. It's usually done in their free time and for the hobby.
« Last Edit: Sat, 22 February 2020, 14:47:22 by Zeelobby »

Offline lolafineday

  • Posts: 274
Re: [IC] hiney tkl one
« Reply #141 on: Sat, 22 February 2020, 14:47:23 »
Show Image


the anti flipper flip club official keyboard

Having never designed or manufactured myself, what are the main reasons for low-batch runs?  If anybody could manufacture at scale with QC, it would be China, right?  There's clearly more work on your end with say a 500-run batch vs a 100 run batch, but aside from that, are there genuine manufacturing concerns with quality?  Upfront manufacturing deposits?  I'm starting to get the design itch....
Trust me. The last thing you want is China QCing these boards.
I think your statement is dumb, for every board the preliminary phase of qc always happens in the factories. So it's important for "china" to qc them.

Sent from my SM-G975F using Tapatalk


Offline hineybush

  • * Maker
  • Thread Starter
  • Posts: 1386
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [IC] hiney tkl one
« Reply #142 on: Sat, 22 February 2020, 14:59:20 »
Show Image


the anti flipper flip club official keyboard

Having never designed or manufactured myself, what are the main reasons for low-batch runs?  If anybody could manufacture at scale with QC, it would be China, right?  There's clearly more work on your end with say a 500-run batch vs a 100 run batch, but aside from that, are there genuine manufacturing concerns with quality?  Upfront manufacturing deposits?  I'm starting to get the design itch....
Trust me. The last thing you want is China QCing these boards.
I think your statement is dumb, for every board the preliminary phase of qc always happens in the factories. So it's important for "china" to qc them.

Sent from my SM-G975F using Tapatalk

it's also important for me (or any vendor) to check them, as I do. if you'd like to do stuff differently I implore you to do it yourself

Offline Zeelobby

  • Posts: 696
Re: [IC] hiney tkl one
« Reply #143 on: Sat, 22 February 2020, 15:01:16 »
Show Image


the anti flipper flip club official keyboard

Having never designed or manufactured myself, what are the main reasons for low-batch runs?  If anybody could manufacture at scale with QC, it would be China, right?  There's clearly more work on your end with say a 500-run batch vs a 100 run batch, but aside from that, are there genuine manufacturing concerns with quality?  Upfront manufacturing deposits?  I'm starting to get the design itch....
Trust me. The last thing you want is China QCing these boards.
I think your statement is dumb, for every board the preliminary phase of qc always happens in the factories. So it's important for "china" to qc them.

Sent from my SM-G975F using Tapatalk
"At least not as the sole QCers."

Calm down.

Offline DALExSNAIL

  • The User Formerly Known as 'Formerly DudeSnail'
  • * Esteemed Elder
  • Posts: I am a geek!!
  • Location: Myrtle Beach, SC
  • 𝖋𝖚𝖈𝖐 𝖆𝖑𝖕𝖘
Re: [IC] hiney tkl one
« Reply #144 on: Sat, 22 February 2020, 15:04:11 »
China sometimes just be like
"These 2 parts are literal different blue pantones, damn guess this is good to ship!  :thumb:"

Offline lolafineday

  • Posts: 274
Re: [IC] hiney tkl one
« Reply #145 on: Sat, 22 February 2020, 15:05:08 »
China sometimes just be like
"These 2 parts are literal different blue pantones, damn guess this is good to ship!  :thumb:"
Ahhahah that's not good qc

Sent from my SM-G975F using Tapatalk


Offline hineybush

  • * Maker
  • Thread Starter
  • Posts: 1386
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [IC] hiney tkl one
« Reply #146 on: Sat, 22 February 2020, 15:07:52 »
China sometimes just be like
"These 2 parts are literal different blue pantones, damn guess this is good to ship!  :thumb:"
Ahhahah that's not good qc

Sent from my SM-G975F using Tapatalk

QC from the factory is usually physical defects etc. with less emphasis on finish or coating issues. you can always pay to have better QC done (which I did with hbcp, and others have done) which is nice, but will drive the overall cost up.

Offline Rumblehotep

  • Posts: 421
Re: [IC] hiney tkl one
« Reply #147 on: Sat, 22 February 2020, 15:10:48 »
Oh boy thatís some kinda purple.

I always wonder, do designers have a go-to keyset in mind when drawing these up?

Offline lolafineday

  • Posts: 274
Re: [IC] hiney tkl one
« Reply #148 on: Sat, 22 February 2020, 15:12:23 »
China sometimes just be like
"These 2 parts are literal different blue pantones, damn guess this is good to ship!  :thumb:"
Ahhahah that's not good qc

Sent from my SM-G975F using Tapatalk

QC from the factory is usually physical defects etc. with less emphasis on finish or coating issues. you can always pay to have better QC done (which I did with hbcp, and others have done) which is nice, but will drive the overall cost up.
Yeah this hobby is very keen on perfection, which the factories are not used to as they produce things more for functionality versus aesthetics.

Sent from my SM-G975F using Tapatalk


Offline hineybush

  • * Maker
  • Thread Starter
  • Posts: 1386
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [IC] hiney tkl one
« Reply #149 on: Sat, 22 February 2020, 15:16:04 »
Oh boy thatís some kinda purple.

I always wonder, do designers have a go-to keyset in mind when drawing these up?

not exactly but i prefer the classic/simple sets so that's probably what i end up designing for subconciously, lol

China sometimes just be like
"These 2 parts are literal different blue pantones, damn guess this is good to ship!  :thumb:"
Ahhahah that's not good qc

Sent from my SM-G975F using Tapatalk

QC from the factory is usually physical defects etc. with less emphasis on finish or coating issues. you can always pay to have better QC done (which I did with hbcp, and others have done) which is nice, but will drive the overall cost up.
Yeah this hobby is very keen on perfection, which the factories are not used to as they produce things more for functionality versus aesthetics.

Sent from my SM-G975F using Tapatalk

yes