Author Topic: [IC] BBN TACTILE SWITCH (Shipping to vendors!)  (Read 10414 times)

0 Members and 1 Guest are viewing this topic.

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
[IC] BBN TACTILE SWITCH (Shipping to vendors!)
« on: Wed, 23 March 2022, 21:57:36 »
BBN TACTILE SWITCH
UNIQUE TACTILE EXPERIENCE WITH A SOPHISTICATED SOUND PROFILE

Sound test (Prototype v1)
wind65+zoom65+kbd67lite


Specifications

Enthusiast Tactile Switch
Sharp tactile bump, Sudden drop ("P") and Snappy return
[Manufactured by: Tecsee]

Top Housing: Custom nylon blend BBN top housing (Pantone 000c)
Bottom Housing: Clear Polycarb (Clear)
Stem: Polyoxymethylene (POM) lengthened stem (Pantone 188c)
Spring: 63.5g Dual stage (gold plated)

*FACTORY UNLUBED

284801-0

Vendors
EU:candykeys
UK:proto[Typist]
AUS: allcaps.store
US:dangkeebs
PH:zionstudios.ph
CA: Shockport keyboards
MY:Rebuiltkeyboards
SEA:qwertyqop

Sale method: In-Stock Drop
Date: *not announced*

284119-1 284125-2 284123-3

Force Curve: BBN Tactile 63.5g Dual Stage Spring

284808-4
Fig1: BBN Tactile Force curve
Initial sharp, quick and short tactile action followed by resistive and "snappy" nature of the dual stage spring resulting in a lively tactile experience.


BBN TACTILE limited edition mascot stickers!!
285132-5

Switchdoctor.au Twitch Stream Highlights

BBN Tactile vs Other Popular Tactiles

BBN Tactile Switch Stem Comparison

BBN Tactile Sound Test: Ikki, alu plate, silicon sound dampening

BBN TACTILE THIRD PARTY REVIEW :)

« Last Edit: Mon, 12 September 2022, 22:53:23 by ClackCulture »

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BUILTBYNIM TACTILE SWITCH
« Reply #1 on: Wed, 23 March 2022, 22:25:25 »
Working to get this switch as an instock release for you all!  ;D

Online pixelpusher

  • * Elevated Elder
  • Posts: 4029
  • Location: Tennessee - USA
Re: [IC] BUILTBYNIM TACTILE SWITCH
« Reply #2 on: Wed, 23 March 2022, 23:39:21 »
A bit sparse on the details here...

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BUILTBYNIM TACTILE SWITCH
« Reply #3 on: Thu, 24 March 2022, 00:44:12 »
information is going to be released soon :) streamers/ content creaters will be getting the switch in the coming days!

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BUILTBYNIM TACTILE SWITCH
« Reply #4 on: Thu, 24 March 2022, 00:44:47 »
A bit sparse on the details here...
information is going to be released soon :) streamers/ content creaters will be getting the switch in the coming days!

Offline //gainsborough

  • Posts: 357
  • Location: Oregon
  • ALPSの日常
Re: [IC] BUILTBYNIM TACTILE SWITCH
« Reply #5 on: Thu, 24 March 2022, 02:07:10 »
A bit sparse on the details here...

Psh - there's plenty! 

It's "sophisticated".

It's "unique". 

It's the "tactile to end all tactile switches!"

Offline Mr Chrome

  • Posts: 196
  • Location: Australia
Re: [IC] BUILTBYNIM TACTILE SWITCH
« Reply #6 on: Thu, 24 March 2022, 02:43:22 »
With so many switches available, I think it’s better to be upfront about what you’re offering. I don’t think it’s fair getting people to run around chasing content creators just to hear basic info such as bottom out and materials. If people are interested, they’ll find the content.
“This plastic rectangle is alright. The plastic rectangles on top of it, though...”

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BUILTBYNIM TACTILE SWITCH
« Reply #7 on: Thu, 24 March 2022, 04:16:36 »
A bit sparse on the details here...

Psh - there's plenty! 

It's "sophisticated".

It's "unique". 

It's the "tactile to end all tactile switches!"
ahahah you get me! nah really tho il be updating this IC in the coming days!

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BUILTBYNIM TACTILE SWITCH
« Reply #8 on: Thu, 24 March 2022, 04:17:39 »
With so many switches available, I think it’s better to be upfront about what you’re offering. I don’t think it’s fair getting people to run around chasing content creators just to hear basic info such as bottom out and materials. If people are interested, they’ll find the content.
i 100% agree with you! this page right now is just a teaser till i finish setting up my website and transfer all the information over to the IC! in the next couple of days this will be updated with everything!

Offline Fraaaan

  • Posts: 317
  • Location: cucked (EU)
Re: [IC] BUILTBYNIM TACTILE SWITCH
« Reply #9 on: Thu, 24 March 2022, 05:50:56 »
Where is all the information?

Offline Coby

  • Posts: 40
  • Location: Mars
Re: [IC] BUILTBYNIM TACTILE SWITCH
« Reply #10 on: Thu, 24 March 2022, 06:18:31 »
 If you are going to even bother to post a ic for a switch at least post the specs this feels like a waste of time checking out since all we know right now is that its a tactile, double stage spring and noctua colorway :-X

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BUILTBYNIM TACTILE SWITCH
« Reply #11 on: Thu, 24 March 2022, 08:11:07 »
Where is all the information?
hey fran! all the information will be updated soon! i made this IC this early because some memebers in the builtbynim community wanted to see more rendors of the product! instead of spamming instagram i just posted all here! il update everything soon!

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BUILTBYNIM TACTILE SWITCH
« Reply #12 on: Thu, 24 March 2022, 08:12:31 »
If you are going to even bother to post a ic for a switch at least post the specs this feels like a waste of time checking out since all we know right now is that its a tactile, double stage spring and noctua colorway :-X
hey hey! i actualy posted this like this because some members of the BBN community wanted to see more of the renders! instead of spamming instagram i just made it available to everyone while i updated everything slowly! also its not noctua colourway ;)

Offline nickthaskater

  • Posts: 50
Re: [IC] BUILTBYNIM TACTILE SWITCH
« Reply #13 on: Thu, 24 March 2022, 12:51:28 »
ahahah you get me! nah really tho il be updating this IC in the coming days!
Just... post the IC when you actually have details to share? This is pointless and I couldn't care less about remembering to come back when you may or may not have updated it.

Offline P103

  • Posts: 112
  • Location: Pending
Re: [IC] BUILTBYNIM TACTILE SWITCH
« Reply #14 on: Fri, 25 March 2022, 06:24:39 »
Is this a horse?

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BUILTBYNIM TACTILE SWITCH
« Reply #15 on: Sun, 27 March 2022, 00:08:12 »
Is this a horse?
not sure what you mean?

Offline KeyBros_

  • Posts: 87
Re: [IC] BUILTBYNIM TACTILE SWITCH (Information updated)
« Reply #16 on: Sun, 27 March 2022, 15:01:06 »
ZZzzzzZZz

Offline granola bar enthusiast

  • Posts: 317
  • Location: USA
Re: [IC] BUILTBYNIM TACTILE SWITCH (Information updated)
« Reply #17 on: Mon, 28 March 2022, 14:23:35 »
looks pretty cool, would appreciate a force graph or something to showcase the bump's feel

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BUILTBYNIM TACTILE SWITCH (Information updated)
« Reply #18 on: Mon, 28 March 2022, 23:50:02 »
looks pretty cool, would appreciate a force graph or something to showcase the bump's feel
it will be updated in the next couple of days :) stay tuned!!

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BUILTBYNIM TACTILE SWITCH (Information updated)
« Reply #19 on: Thu, 31 March 2022, 01:51:58 »

Offline Nonnegaard

  • Posts: 334
Re: [IC] BUILTBYNIM TACTILE SWITCH (Information updated)
« Reply #20 on: Thu, 31 March 2022, 03:44:00 »
why the colors? seems like you're trying to emulate a frankenswitch, even though this is a production switch. maybe pretentious is a strong word in this case, but its definitely weird. i know that the bbn linears had the same colors, but i didn't like it then either. I'm not really bothered by it, but the question "why exactly does the switch have these colors" is good food for thought. maybe it has been addressed prior, idk. would love to hear it in that case.
TGR Jane V2, Keycult No. 1/TKL, Dolphin 2021, Melody65, Gherkin, Model M, 5°, NCR80, M0110-A

Offline LMarci

  • Posts: 85
  • Location: The Abyss
Re: [IC] BUILTBYNIM TACTILE SWITCH (Information updated)
« Reply #21 on: Sat, 02 April 2022, 07:02:10 »
"TACTILE TO END ALL TACTILE SWITCHES"

Barely any info, cursed color combo, no force curve, a pretentious description, use of a word "enthusiast" in an enthusiast driven forum, a typo in a very modestly sized IC, branded blend and lastly only a single vendor at the time of typing this.

It truly checks all the satire boxes but was unfortunately posted on march 23rd, not april 1st.

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BUILTBYNIM TACTILE SWITCH (Information updated)
« Reply #22 on: Mon, 04 April 2022, 20:36:24 »
"TACTILE TO END ALL TACTILE SWITCHES"

Barely any info, cursed color combo, no force curve, a pretentious description, use of a word "enthusiast" in an enthusiast driven forum, a typo in a very modestly sized IC, branded blend and lastly only a single vendor at the time of typing this.

It truly checks all the satire boxes but was unfortunately posted on march 23rd, not april 1st.
you sound like a fun person! everything you have mentioned will be updated! i am one person with a full time job!

Offline conternecticus

  • Posts: 118
  • Location: somewhere that has crazy shipping fees
  • (¬‿¬ )
Re: [IC] BUILTBYNIM TACTILE SWITCH (Information updated)
« Reply #23 on: Tue, 05 April 2022, 01:25:45 »
Would love to hear a soundtest, stock and lubed.
Will there be any prelube from the factory?

Offline iaman

  • Posts: 186
Re: [IC] BUILTBYNIM TACTILE SWITCH (Information updated)
« Reply #24 on: Tue, 05 April 2022, 17:10:01 »
Guessing, based on your other switch being made by them, that this is going to be a Tecsee-produced switch? Will it be a new stem mold from them, or one of their existing ones? Or am I completely off-base in assuming they'll be the manu? Guess I should just wait and see.

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BUILTBYNIM TACTILE SWITCH (Information updated)
« Reply #25 on: Thu, 07 April 2022, 07:25:52 »
Would love to hear a soundtest, stock and lubed.
Will there be any prelube from the factory?
Hey!! these switches are currently on rout to couple of stremers and content creaters :) id like for everyone to hear someone elses thoughts other than a soundtest produced by me :P sound tests will be available for everyone super soon!

just like the BBN linear these will be FACTORY UNLUBED!! the way it should be haha

Offline LMarci

  • Posts: 85
  • Location: The Abyss
Re: [IC] BUILTBYNIM TACTILE SWITCH (Information updated)
« Reply #26 on: Fri, 08 April 2022, 05:05:36 »
"TACTILE TO END ALL TACTILE SWITCHES"

Barely any info, cursed color combo, no force curve, a pretentious description, use of a word "enthusiast" in an enthusiast driven forum, a typo in a very modestly sized IC, branded blend and lastly only a single vendor at the time of typing this.

It truly checks all the satire boxes but was unfortunately posted on march 23rd, not april 1st.
you sound like a fun person! everything you have mentioned will be updated! i am one person with a full time job!
Then perhaps don't post it until you have all the other info? "I'm one person with a full time job". Typing an IC doesn't take as much time as you are implying. Just stop.
« Last Edit: Fri, 08 April 2022, 05:13:46 by LMarci »

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BUILTBYNIM TACTILE SWITCH (Information updated)
« Reply #27 on: Sun, 10 April 2022, 18:19:23 »
"TACTILE TO END ALL TACTILE SWITCHES"

Barely any info, cursed color combo, no force curve, a pretentious description, use of a word "enthusiast" in an enthusiast driven forum, a typo in a very modestly sized IC, branded blend and lastly only a single vendor at the time of typing this.

It truly checks all the satire boxes but was unfortunately posted on march 23rd, not april 1st.
you sound like a fun person! everything you have mentioned will be updated! i am one person with a full time job!
Then perhaps don't post it until you have all the other info? "I'm one person with a full time job". Typing an IC doesn't take as much time as you are implying. Just stop.
fair enough! but it is easier for me to update as i go! YOU DO YOU

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BUILTBYNIM TACTILE SWITCH (Information updated)
« Reply #28 on: Sun, 10 April 2022, 18:24:14 »
Guessing, based on your other switch being made by them, that this is going to be a Tecsee-produced switch? Will it be a new stem mold from them, or one of their existing ones? Or am I completely off-base in assuming they'll be the manu? Guess I should just wait and see.
hey! yes it will another BBN project done with tecsee, the new moulds + materials for the housing were done in the BBN linear project and we will be using the same housing for this as well! (the sound profile and the smoothness we achieved was great and we want to continue that on to the tactile project as well) and for the stem it is an adapted version of an existing one :) il upload some photos of it on the IC for you guys! f

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BUILTBYNIM TACTILE SWITCH
« Reply #29 on: Mon, 11 April 2022, 00:10:46 »
A bit sparse on the details here...

Psh - there's plenty! 

It's "sophisticated".

It's "unique". 

It's the "tactile to end all tactile switches!"
thats all thats needed :P nah i joke, the information is updated now!!

Offline LumiP

  • Posts: 37
  • Location: Midwest, USA
Re: [IC] BUILTBYNIM TACTILE SWITCH (Information updated)
« Reply #30 on: Tue, 12 April 2022, 11:05:10 »
"TACTILE TO END ALL TACTILE SWITCHES"

Barely any info, cursed color combo, no force curve, a pretentious description, use of a word "enthusiast" in an enthusiast driven forum, a typo in a very modestly sized IC, branded blend and lastly only a single vendor at the time of typing this.

It truly checks all the satire boxes but was unfortunately posted on march 23rd, not april 1st.
you sound like a fun person! everything you have mentioned will be updated! i am one person with a full time job!
Then perhaps don't post it until you have all the other info? "I'm one person with a full time job". Typing an IC doesn't take as much time as you are implying. Just stop.
fair enough! but it is easier for me to update as i go! YOU DO YOU
I understand that this is easier for you, but it's important to note that how you present things articulates your integrity as the person running this IC. It would do well for you not to tilt the community you need to make this a success. If you treat people like they should just be satisfied with anything and jump on board, they're not going to respond kindly. Your description of this switch also does come off as a bit "marketing" influenced and that implies you're just looking for a cash cow, even if that isn't your intent. People don't like that. Just describe the tactile in plain terms and let people decide if they like it.

I do think you should've waited until you had everything together to post, and just sent whoever the photos separately if they weren't willing to wait. It's more professional and people will take you more seriously. I don't think you understand how many people try to run ICs and then are overwhelmed and don't fulfill, or fulfill poorly. Everyone is just trying to protect their best interest.

I realize that not everyone was nice with how they replied, but I would strongly consider taking a deep breath, doing away with being defensive, and accept the advice from the vets in the forum and admit that this wasn't executed well. You'll do better that way rather than pushing people to see your conduct and let this flop on principle. You're being told directly that this wasn't the way to go. Just accept the criticism and continue improving. You clearly believe in this project. People will see that as you correct things and make their own decisions.

With all that said, I am fond of having more tactiles. GLWIC, and I'll try to remember to revisit once there are soundtests up. I'll make a judgment about if it's worthy then.

Thanks for updating!
More
Current Boards: Aaru TKL Old Dark Sand, Drop + Planck Purple, Mr Suit WKL Black w/Gold Chamfers, Sangeo60 Black, KBD67Lite White, D45 E-Grey, Wind X Pink, NCR 80 Beige, EVO70 Black & White, Tiger80 Silver, QK65 Dark Green

Offline 1391401

  • Posts: 426
  • MX CLEAR
Re: [IC] BBN TACTILE SWITCH
« Reply #31 on: Tue, 12 April 2022, 11:05:41 »
I'm trying to mentally visualize the tactile bump here, so it basically comes on strong with minimal pre-travel, and then there's a second smaller tactile event towards the end of the travel?  And its like a speed switch where the travel is shorter (<3mm vs ~4mm)?
People I've given money to from this webform who never respond to me and have not shipped me anything: ctrlalt.io 1 2, Team Readline Reputable alternatives to GH group buys: http://pimpmykeyboard.com, https://www.massdrop.com,

Offline Ram08

  • Posts: 4
Re: [IC] BUILTBYNIM TACTILE SWITCH (Information updated)
« Reply #32 on: Tue, 12 April 2022, 11:55:10 »
I understand that this is easier for you, but it's important to note that how you present things articulates your integrity as the person running this IC. It would do well for you not to tilt the community you need to make this a success. If you treat people like they should just be satisfied with anything and jump on board, they're not going to respond kindly. Your description of this switch also does come off as a bit "marketing" influenced and that implies you're just looking for a cash cow, even if that isn't your intent. People don't like that. Just describe the tactile in plain terms and let people decide if they like it.

I do think you should've waited until you had everything together to post, and just sent whoever the photos separately if they weren't willing to wait. It's more professional and people will take you more seriously. I don't think you understand how many people try to run ICs and then are overwhelmed and don't fulfill, or fulfill poorly. Everyone is just trying to protect their best interest.

I realize that not everyone was nice with how they replied, but I would strongly consider taking a deep breath, doing away with being defensive, and accept the advice from the vets in the forum and admit that this wasn't executed well. You'll do better that way rather than pushing people to see your conduct and let this flop on principle. You're being told directly that this wasn't the way to go. Just accept the criticism and continue improving. You clearly believe in this project. People will see that as you correct things and make their own decisions.

With all that said, I am fond of having more tactiles. GLWIC, and I'll try to remember to revisit once there are soundtests up. I'll make a judgment about if it's worthy then.

Thanks for updating!

+1. Well said!  :thumb:

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BUILTBYNIM TACTILE SWITCH (Information updated)
« Reply #33 on: Wed, 13 April 2022, 20:55:02 »
"TACTILE TO END ALL TACTILE SWITCHES"

Barely any info, cursed color combo, no force curve, a pretentious description, use of a word "enthusiast" in an enthusiast driven forum, a typo in a very modestly sized IC, branded blend and lastly only a single vendor at the time of typing this.

It truly checks all the satire boxes but was unfortunately posted on march 23rd, not april 1st.
you sound like a fun person! everything you have mentioned will be updated! i am one person with a full time job!
Then perhaps don't post it until you have all the other info? "I'm one person with a full time job". Typing an IC doesn't take as much time as you are implying. Just stop.
fair enough! but it is easier for me to update as i go! YOU DO YOU
I understand that this is easier for you, but it's important to note that how you present things articulates your integrity as the person running this IC. It would do well for you not to tilt the community you need to make this a success. If you treat people like they should just be satisfied with anything and jump on board, they're not going to respond kindly. Your description of this switch also does come off as a bit "marketing" influenced and that implies you're just looking for a cash cow, even if that isn't your intent. People don't like that. Just describe the tactile in plain terms and let people decide if they like it.

I do think you should've waited until you had everything together to post, and just sent whoever the photos separately if they weren't willing to wait. It's more professional and people will take you more seriously. I don't think you understand how many people try to run ICs and then are overwhelmed and don't fulfill, or fulfill poorly. Everyone is just trying to protect their best interest.

I realize that not everyone was nice with how they replied, but I would strongly consider taking a deep breath, doing away with being defensive, and accept the advice from the vets in the forum and admit that this wasn't executed well. You'll do better that way rather than pushing people to see your conduct and let this flop on principle. You're being told directly that this wasn't the way to go. Just accept the criticism and continue improving. You clearly believe in this project. People will see that as you correct things and make their own decisions.

With all that said, I am fond of having more tactiles. GLWIC, and I'll try to remember to revisit once there are soundtests up. I'll make a judgment about if it's worthy then.

Thanks for updating!
Thank you so much for this message, I completely understand everything you are saying! I’m still learning how to manage this forum and gaining experience as I run these projects! People can be mean without understanding other members situations and tbh that’s how every forum is these days and I’m learning how to navigate these situations and participate in a more positive manner :) I have updated the information and will continue to do so! I hope there is enough information now (I agree there wasn’t enough before :( ).

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BUILTBYNIM TACTILE SWITCH (Information updated)
« Reply #34 on: Wed, 13 April 2022, 20:55:41 »
I understand that this is easier for you, but it's important to note that how you present things articulates your integrity as the person running this IC. It would do well for you not to tilt the community you need to make this a success. If you treat people like they should just be satisfied with anything and jump on board, they're not going to respond kindly. Your description of this switch also does come off as a bit "marketing" influenced and that implies you're just looking for a cash cow, even if that isn't your intent. People don't like that. Just describe the tactile in plain terms and let people decide if they like it.

I do think you should've waited until you had everything together to post, and just sent whoever the photos separately if they weren't willing to wait. It's more professional and people will take you more seriously. I don't think you understand how many people try to run ICs and then are overwhelmed and don't fulfill, or fulfill poorly. Everyone is just trying to protect their best interest.

I realize that not everyone was nice with how they replied, but I would strongly consider taking a deep breath, doing away with being defensive, and accept the advice from the vets in the forum and admit that this wasn't executed well. You'll do better that way rather than pushing people to see your conduct and let this flop on principle. You're being told directly that this wasn't the way to go. Just accept the criticism and continue improving. You clearly believe in this project. People will see that as you correct things and make their own decisions.

With all that said, I am fond of having more tactiles. GLWIC, and I'll try to remember to revisit once there are soundtests up. I'll make a judgment about if it's worthy then.

Thanks for updating!

+1. Well said!  :thumb:
+1 from me as well haha

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BBN TACTILE SWITCH
« Reply #35 on: Wed, 13 April 2022, 21:01:14 »
I'm trying to mentally visualize the tactile bump here, so it basically comes on strong with minimal pre-travel, and then there's a second smaller tactile event towards the end of the travel?  And its like a speed switch where the travel is shorter (<3mm vs ~4mm)?
hey!! Okay so, you are pretty much on the money, BBN tactile will have a sharp quick initial tactile action followed by the resistive nature of the dual stage spring (that’s the second bump you are referring to) with these 2 motions you are getting a speed tactile feel with a lot of character (sharp tactile, resistive push down, snappy return) :) plus the unique sound profile BBN switches provide, it’s a great experience!!!

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BUILTBYNIM TACTILE SWITCH (Information updated)
« Reply #36 on: Wed, 13 April 2022, 21:17:44 »
why the colors? seems like you're trying to emulate a frankenswitch, even though this is a production switch. maybe pretentious is a strong word in this case, but its definitely weird. i know that the bbn linears had the same colors, but i didn't like it then either. I'm not really bothered by it, but the question "why exactly does the switch have these colors" is good food for thought. maybe it has been addressed prior, idk. would love to hear it in that case.
hey Nonnegaard! How are you! Okay so, the principal behind BBN is provide an alternative option to switches currently available on the market, BBN switches are designed through research in to sound profile and material selection! One of the reason we make franken switches is because we can’t get that nature/sound profile without combining multiple switches, we shouldn’t need to do that tbh if that characteristic is something we want we should be able to buy it, instead we have to buy multiple batches and combine wasting a lot of money!. BBN switches are not meant to be a “novelty switch” or a “meme” switch, BBN switches will be available in the market to give people the option to try something unique! With that principle we wanted to keep its look different, minimalistic and to the point!

Hope you get what I mean! If you want to know more please message me on discord!!! I can talk more with you there :)

Offline ^prince

  • Posts: 28
  • Location: Melbourne, Australia
Re: [IC] BBN TACTILE SWITCH
« Reply #37 on: Sat, 16 April 2022, 04:31:54 »
Looking good nim! Nice to see an in stock drop for this one!

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BBN TACTILE SWITCH
« Reply #38 on: Sun, 17 April 2022, 23:55:36 »
Looking good nim! Nice to see an in stock drop for this one!
hey hey!! TBH I don't believe community should have to wait 3 months for a batch of switches!!!

Offline DirtyGingy

  • Posts: 74
Re: [IC] BBN TACTILE SWITCH (Information Updated)
« Reply #39 on: Thu, 21 April 2022, 15:14:36 »
that is a very light tactile bump in the style of the old nk blueberry

Offline lush_bunny

  • Posts: 764
  • Location: Philippines
  • TBR Prime | 7V | BOCC
Re: [IC] BBN TACTILE SWITCH (Information Updated)
« Reply #40 on: Thu, 21 April 2022, 15:42:52 »
Interesting. Considering sending switches to Theremingoat for review. Thanks!

Offline IOVERCALLHISTIOCYTES

  • Posts: 1699
Re: [IC] BBN TACTILE SWITCH (Information Updated)
« Reply #41 on: Thu, 21 April 2022, 15:59:58 »
that is a very light tactile bump in the style of the old nk blueberry

Just shifted over to actuate at 2mm. I was hoping for sharp.

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BBN TACTILE SWITCH (Information Updated)
« Reply #42 on: Thu, 21 April 2022, 18:19:53 »
Interesting. Considering sending switches to Theremingoat for review. Thanks!
I will reach out to him! thank you!

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BBN TACTILE SWITCH (Information Updated)
« Reply #43 on: Thu, 21 April 2022, 18:26:16 »
that is a very light tactile bump in the style of the old nk blueberry

Just shifted over to actuate at 2mm. I was hoping for sharp.
the feel of the switch can't just be explained by the force curve unfortunately, it needs to be tried to understand!!

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BBN TACTILE SWITCH (Information Updated)
« Reply #44 on: Thu, 21 April 2022, 18:27:28 »
that is a very light tactile bump in the style of the old nk blueberry
not exactly but I can see why you would think that!!

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BBN TACTILE SWITCH (Sound Test Updated)
« Reply #45 on: Wed, 27 April 2022, 19:27:43 »
Switchdoctor.au recently did a great stream highlighting the BBN tactile!! Links are updated on the IC page and also on the builtbynim discord :)

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BBN TACTILE SWITCH (vendors updated)
« Reply #46 on: Thu, 05 May 2022, 22:44:17 »
vendors are currently being finalised, before selecting a date for the release! stay tuned :)

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BBN TACTILE SWITCH (vendors updated)
« Reply #47 on: Tue, 24 May 2022, 00:20:51 »
BBN tactile review!!

t=69s

Offline ClackCulture

  • Thread Starter
  • Posts: 72
  • Location: melbourne
Re: [IC] BBN TACTILE SWITCH (Shipping to vendors!)
« Reply #48 on: Mon, 12 September 2022, 22:54:04 »
BBN TACTILES ARE CURRENTLY SHIPPING TO VENDORS!!! GET READY :)