Author Topic: Overclock.Net About To Hit 100 Pages On N-key Test (Read 15296 times)

kumki · « **Reply #50 on:** Tue, 25 May 2010, 18:54:38 »

I thought the 2nd shift would cancel out the first outputting lowercase letters; guess not.

microsoft windows · « **Reply #51 on:** Tue, 25 May 2010, 19:15:55 »

Let the true nerds here teach those folks on Overclock.net a lesson!

kumki · « **Reply #52 on:** Wed, 26 May 2010, 17:47:05 »

Can't keyboards be made so each button is assigned its own signal?
Instead of the matrix overlap thing.
Or is that very expensive?

ch_123 · « **Reply #53 on:** Wed, 26 May 2010, 17:59:59 »

That would involve two wires running from each switch, and a controller that can handle 100+ seperate inputs... Many times more complicated and expensive than the established alternatives for NKRO.

Nonmouse · « **Reply #54 on:** Wed, 26 May 2010, 18:21:58 »

Quote from: ch_123;187216

That would involve two wires running from each switch, and a controller that can handle 100+ seperate inputs... Many times more complicated and expensive than the established alternatives for NKRO.

Enh, a dioded NKRO board pretty much does assign a discrete signal to each switch...

ch_123 · « **Reply #55 on:** Wed, 26 May 2010, 18:39:41 »

Well, at least it doesn't need a seperate wire for each switch...

kishy · « **Reply #56 on:** Wed, 26 May 2010, 19:06:38 »

Quote from: kumki;187214

Can't keyboards be made so each button is assigned its own signal?
Instead of the matrix overlap thing.
Or is that very expensive?

Yeah, it's doable. And ch_123, the implementation I'd use, if it were me designing it, would be a common "ground" plus one wire for the other side of each switch, all going direct to the connector (which would be huge of course) with all key interpretation happening inside the computer.

So, basically, doable...but if you're gonna do it, do the heck out of it.

JBert · « **Reply #57 on:** Thu, 27 May 2010, 14:33:51 »

Quote from: kumki;187214

Can't keyboards be made so each button is assigned its own signal?
Instead of the matrix overlap thing.
Or is that very expensive?

Believe it or not, someone patented that idea. I believe he described that he'd use a couple of FPGAs to process the signals.

ch_123 · « **Reply #58 on:** Thu, 27 May 2010, 15:22:31 »

FPGAs... those are the really expensive ones, right? =P

Also, angry overclockers are angry

JBert · « **Reply #59 on:** Thu, 27 May 2010, 16:00:35 »

Woohoo, cross-trolling ahead!

Quote from: Tator Tot from OCN

On a side note, Geekhack = full of immature idiots? Look I can generalize too.

Now I would prefer attention-deficit keyboard nutheads, but that would work too.

So, can we keep him?

ch_123 · « **Reply #60 on:** Thu, 27 May 2010, 17:03:28 »

I got a warning on a G19 thread for posting this -

Quote

You've just acquired a $200 keyboard which consists of a $10 keyboard with a screen on it. Well done.

On a related note, I am the heir to the Nigerian throne. If you send me $10,000 I will be able to share my family's lost wealth with you.

Does anyone know if there's a "Report humorless douchebag" button on OCN?

bhtooefr · « **Reply #61 on:** Thu, 27 May 2010, 20:39:39 »

Wow. Can we drop some chlorine in that gene pool?

ch_123 · « **Reply #62 on:** Fri, 28 May 2010, 04:23:33 »

Quote from: ripster;187502

EDIT: This thread? Wow. I thought we got off base sometimes.

Yeah, THAT thread.

HaaTa · « **Reply #63 on:** Fri, 28 May 2010, 04:47:43 »

Thanks for the daily entertainment OCN....HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA

I needed that :rofl:

The trolling wasn't even that amazing, it was the responses that made it awesome.

hyperlinked · « **Reply #64 on:** Fri, 28 May 2010, 06:15:34 »

I am so glad I do not have an account there. Wow. More tools in just one thread than I can find at my hardware store.

BTW, lmnop... you mechanical keyboard troll you...

erricrice · « **Reply #65 on:** Fri, 28 May 2010, 07:07:29 »

Quote from: hyperlinked;187602

BTW, lmnop... you mechanical keyboard troll you...

Oh come on, just spreading the word can't be trolling....oh wait, yes it can hahahaha and lmnop, that was great, those guys needed their face trolled all over

lmnop · « **Reply #66 on:** Fri, 28 May 2010, 08:29:51 »

Quote from: lmnop;9493651

I posted 2 meals and a fact which is good contribution.

for ch

Quote from: lmnop;9486745

mechanical keyboards use higher quality plastics, electronics and switches. you pay more for a better product which isn't the case for rubber dome keyboards.

as senator clay davis would say.

Phaedrus2129 · « **Reply #67 on:** Fri, 28 May 2010, 08:41:35 »

I think I'm, like, one infraction away from a ban. However, I post so much helpful information and articles about power supply that none of them want me to be banned, so I don't get infractions. It's a fine balancing act between being helpful, and being a **** to idiots who get on my nerves.

itlnstln · « **Reply #68 on:** Fri, 28 May 2010, 08:42:55 »

That Clay Davis pic is epic.

lmnop · « **Reply #69 on:** Fri, 28 May 2010, 08:49:17 »

resize it and make it your avatar

itlnstln · « **Reply #70 on:** Fri, 28 May 2010, 08:51:58 »

Will do. After the Stanley Cup Finals, though.

J888www · « **Reply #71 on:** Fri, 28 May 2010, 09:01:38 »

Seems there are many more GH members in OCN, or OCN members in GH.

muchadoaboutnothing · « **Reply #72 on:** Fri, 28 May 2010, 23:35:32 »

Quote from: ripster;187833

The power that comes from HEAVILY moderated forums. He's just mad I insulted his bouncing fat girl Avatar.

Or maybe it was a victory based on the fact that the thread topic (see how good your keyboard is.) had nothing to do with the OP post (double shift)?

In either case, :rip: double shift thread.

:violin:

Rajagra · « **Reply #73 on:** Sat, 29 May 2010, 05:59:13 »

Quote from: ripster;187833

Manyak gets the final word.

He deleted it? I hope he used Delete AND Backspace, to be on the safe side. :evil:

EDIT> I dug out my G11. It passes using the key combinations that my G15 failed (Shift or Control with arrow keys.)
I found a few combos that the G11 failed:
qa,
q,1
q1=
qa [Down Arrow]

So it's still 2-key rollover, just better thought out than the G15. (Unless anyone spots an unfortunate combo of 3 keys that it fails on.)

You thought double-shifted brown fox test was boring. Try hunting down keys that ghost.

Manyak · « **Reply #74 on:** Sat, 29 May 2010, 08:12:52 »

Quote from: ripster;187833

Lol. I give up.

Manyak gets the final word.

The power that comes from HEAVILY moderated forums. He's just mad I insulted his bouncing fat girl Avatar. :biggrin1:
Show Image

At least I get to get rid of stupid threads like that one :)

For real though, it's already got some people believing it. That thread had to go for my own sanity, or all anyone would want would be keyboards that can pass the shift test.

And wow man that avatar's been gone for a while now, lol.

lmnop · « **Reply #75 on:** Sat, 29 May 2010, 08:35:10 »

Quote from: webwit;187963

Moderators suck, and that forum sucks, so I congratulate you for combining those qualities.

all Manyak is trying to do is increase mechanical keyboard awareness not start a second geekhack so I don't know why you think that. geekhack gets credit and traffic from overclock.net. you can't blame overclock.net for a couple bad apples like Enigma and Pathogen who started the threads. I never even seen them before.

Mental Hobbit · « **Reply #76 on:** Sat, 29 May 2010, 09:26:39 »

Webwit disapproves of moderators? I'm speechless!

Manyak · « **Reply #77 on:** Sat, 29 May 2010, 09:40:13 »

Quote from: webwit;187963

Moderators suck, and that forum sucks, so I congratulate you for combining those qualities.

Oooo, I'm so butthurt right now I could kill baby jesus.

izzypizzy · « **Reply #78 on:** Wed, 02 June 2010, 18:01:43 »

It starts again?

At Hardforum this time.

erricrice · « **Reply #79 on:** Wed, 02 June 2010, 20:19:11 »

Quote from: ripster;188986

Lol. I haven't logged in there in a while...

Show Image

Lol....

And you can't stop it!

>

News:

Author Topic: Overclock.Net About To Hit 100 Pages On N-key Test (Read 15296 times)