Author Topic: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time  (Read 409353 times)

0 Members and 1 Guest are viewing this topic.

Offline Emmiya

  • Posts: 132
  • Location: Hull - United Kingdom.
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1250 on: Thu, 14 February 2013, 19:46:55 »
*squeal*

It's all becoming real now :D
Quite surprised how fast people are paying too ;p

Offline Turkishrambo

  • Posts: 483
  • Location: ontario canada
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1251 on: Thu, 14 February 2013, 19:59:53 »
Paid, but completely ****ing forgot to include my gh id, I shall PM u TJ!

PM'd transation ID and shipping info.

Sorry about that.
« Last Edit: Thu, 14 February 2013, 20:03:01 by Turkishrambo »

Offline noobandroid

  • Posts: 61
  • Location: Malaysia
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1252 on: Thu, 14 February 2013, 20:20:00 »
i believe my order is only the RoW base 1 set and the WoR mod 1 set, can you confirm?
HHKB

Offline Potato

  • Posts: 7
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1253 on: Thu, 14 February 2013, 20:39:19 »
Hey TJ,

In my invoice you are missing a 17 key row set. I sent you a pm about two weeks ago and you responded but you must have forgotten it.

Thanks!

Offline Larken

  • Posts: 624
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1254 on: Thu, 14 February 2013, 20:40:12 »
paid.
| Ergodox #1 | Ergodox #2 |


Filco Majestouch Brown | Ducky 1087 Brown | Cherry G80-3494 Reds | Unicomp Ultra Classics | Cherry G80-8113 Clears |

Offline metalliqaz

  • * Maker
  • Posts: 4951
  • Location: the Making Stuff subforum
  • Leopold fanboy
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1255 on: Thu, 14 February 2013, 20:51:30 »
I haven't been following this thread at all.  Uhm... why are there subsidies on my invoice?

Quote
Geekhack pack - WoR/RoW/RoG geekhack logo keys1$2.00$2.00
RoG Base kit subsidy - So everyone gets a fair price on keys1$3.00$3.00
T.J.'s keys subsidy - So I can get some keys?1$1.50$1.50
Sorting - So I don't go insane1$2.00$2.00
Paypal fee - 3% + $0.301$3.56$3.56
RoG Base kit1$30.00$30.00
RoG Mods1$30.00$30.00
RoG tsangan1$32.00$32.00
Subtotal$104.06
Shipping/handling$8.00
Total$112.06

Is this a for-profit GB?  How are these being shipped?  High-end shipping for one keyset would be USPS small priority box, which is $5.35...  Bubble mailers even cheaper.

Offline noobandroid

  • Posts: 61
  • Location: Malaysia
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1256 on: Thu, 14 February 2013, 20:56:31 »
my invoice is also kinda off from what i ordered
13453-0
HHKB

Offline jdcarpe

  • * Curator
  • Posts: 8852
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1257 on: Thu, 14 February 2013, 20:57:04 »
Have you been following the thread?

http://geekhack.org/index.php?topic=37225.msg783402#msg783402

You know how much time it's going to take to prepare all these for shipment? I'm not even talking about sorting them. And don't forget gas to and from the post office, etc.
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline noobandroid

  • Posts: 61
  • Location: Malaysia
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1258 on: Thu, 14 February 2013, 21:00:15 »
i am referring to orders, those single digit prices i dont give a Fk,
i am pretty sure i did not order RoG base
not sure bout the 17 keys though, waiting for OP to correct it

and USD28 for int shipping is a little.. steep i think for a USPS international post
HHKB

Offline jdcarpe

  • * Curator
  • Posts: 8852
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1259 on: Thu, 14 February 2013, 21:03:03 »
Sorry, you snuck your post in there. I was really referring that to metalliqaz.

Unfortunately, USPS went from $17 to $28 for small flat rate international. Nothing we can do about that, I'm afraid.
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline Ivanguo1985

  • Posts: 15
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1260 on: Thu, 14 February 2013, 21:30:59 »
Thanks for fixing the invoice and paid. :D

Offline aggiejy

  • ** Moderator Emeritus
  • Posts: 1126
  • Location: ~Austin, Texas
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1261 on: Thu, 14 February 2013, 22:12:49 »
Woah, some reason wasn't expecting a $183 bill, but I guess that's right.  Can't wait for you to get that order in queue. :)

Offline tauburn

  • Posts: 447
  • Location: Philadelphia
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1262 on: Thu, 14 February 2013, 22:37:18 »
i will pay for mine tomorrow. waiting on a payment. sorry for the holdup

Offline Sai

  • Posts: 820
  • Location: SG
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1263 on: Thu, 14 February 2013, 23:18:09 »
i'll pay mine on 28th. :D
- WTB/WTT - Cotton Candy Brobot V2

Offline Shirukii

  • Posts: 45
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1264 on: Thu, 14 February 2013, 23:38:04 »
Paid :D
CM Storm QuickFire Rapid | Ducky DK9008 | IBM Model M

Offline Glod

  • * Elevated Elder
  • Posts: 1998
  • Location: Virginia, USA
  • Also Known As Ergonomech
    • YouTube Channel
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1265 on: Thu, 14 February 2013, 23:44:28 »
invoice looks fine, paid

Offline okooko

  • Posts: 476
  • Location: Australia
  • afk.
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1266 on: Fri, 15 February 2013, 00:01:33 »
Have you been following the thread?

http://geekhack.org/index.php?topic=37225.msg783402#msg783402

You know how much time it's going to take to prepare all these for shipment? I'm not even talking about sorting them. And don't forget gas to and from the post office, etc.

The link refers to the time when there were 20x ppl keen at the 50sets price (which works out well enough for $3+ each), looking at the OP now, it says 30x, have there been more interest in the RoG bases? and 10x more interested parties would impact on the additional costs each person bares?

Just interested in the final logistics. Not that I'm too fussed forking out $10 worth of handling fees etc

edit: ill pay when i get home.

30x tier is $45 = 1350
50x tier is $30 = 900
450 variance over 200 odd people? =$3ea?

Anyway, that my mathematical genius thoughts for today
« Last Edit: Fri, 15 February 2013, 00:04:21 by okooko »

Offline brighenne

  • Posts: 276
  • Location: Long Beach, CA
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1267 on: Fri, 15 February 2013, 00:04:18 »
Woah, some reason wasn't expecting a $183 bill, but I guess that's right.  Can't wait for you to get that order in queue. :)

Same here, with a bit of a smaller bill.

Invoice paid.

Offline jabar

  • Posts: 848
  • Location: TX, USA
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1268 on: Fri, 15 February 2013, 00:19:06 »
was considering a new keyboard but forgot how much two sets of Klaxon cost!
Leopold FC660C - Max Keyboard Nighthawk X8 - Ducky DK9008 Shine II 78 Edition - Noppoo Choc Mini - Cherry G80-2100HDD - Cherry G80-8113HDPUS - Plu-M87 - Leopold FC700R Ergo Clears - Deck Legend Frost 105 - IBM F PC Keyboard - IBM M 122 (Lexmark) - Apple Extended Keyboard II

Phantom 7bit

Offline Shinryuu

  • Posts: 49
  • Location: Finland
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1269 on: Fri, 15 February 2013, 00:59:13 »
Thanks I received your invoice :cool:
(ノ◕ヮ◕)ノ*:・゚✧

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1270 on: Fri, 15 February 2013, 01:37:01 »
i am referring to orders, those single digit prices i dont give a Fk,
i am pretty sure i did not order RoG base
not sure bout the 17 keys though, waiting for OP to correct it

and USD28 for int shipping is a little.. steep i think for a USPS international post

The order form showed what I had on invoice, but it's dealt with now.

Hey TJ,

In my invoice you are missing a 17 key row set. I sent you a pm about two weeks ago and you responded but you must have forgotten it.

Thanks!

i believe my order is only the RoW base 1 set and the WoR mod 1 set, can you confirm?

Adjusted.

i will pay for mine tomorrow. waiting on a payment. sorry for the holdup
i'll pay mine on 28th. :D

No worries, that's why paying is until the 2nd

Have you been following the thread?

http://geekhack.org/index.php?topic=37225.msg783402#msg783402

You know how much time it's going to take to prepare all these for shipment? I'm not even talking about sorting them. And don't forget gas to and from the post office, etc.

The link refers to the time when there were 20x ppl keen at the 50sets price (which works out well enough for $3+ each), looking at the OP now, it says 30x, have there been more interest in the RoG bases? and 10x more interested parties would impact on the additional costs each person bares?

Just interested in the final logistics. Not that I'm too fussed forking out $10 worth of handling fees etc

edit: ill pay when i get home.

30x tier is $45 = 1350
50x tier is $30 = 900
450 variance over 200 odd people? =$3ea?

Anyway, that my mathematical genius thoughts for today

To get 30 orders, I need $1350, as you say.  Since price was capped at $30/set, that means those 30 people would have only given me $900.  That leaves a balance due of $450 spread across ~150 orders.  I had a lot of people ask me to remove their orders on top of the 20someodd that were deleted today.

I haven't been following this thread at all.  Uhm... why are there subsidies on my invoice?

Quote
Geekhack pack - WoR/RoW/RoG geekhack logo keys1$2.00$2.00
RoG Base kit subsidy - So everyone gets a fair price on keys1$3.00$3.00
T.J.'s keys subsidy - So I can get some keys?1$1.50$1.50
Sorting - So I don't go insane1$2.00$2.00
Paypal fee - 3% + $0.301$3.56$3.56
RoG Base kit1$30.00$30.00
RoG Mods1$30.00$30.00
RoG tsangan1$32.00$32.00
Subtotal$104.06
Shipping/handling$8.00
Total$112.06

Is this a for-profit GB?  How are these being shipped?  High-end shipping for one keyset would be USPS small priority box, which is $5.35...  Bubble mailers even cheaper.

There are subsidies on *everyone's* invoice for two reasons.  The most obvious is for the stuff that I want, WoR base/mods/tsangan, RoW mods/tsangan, RoG base/mods/tsangan.  This seems like a common practice to do and so it was added in December. 

The less obvious is RoG base.  The reason that happened is it was put to table that if the price of RoG was guaranteed lower, ~5-8 people would add it to their orders.  At the time, RoG base was struggling BIG TIME to get orders and was languishing at the MoQ range.  A majority of the people following the thread at the time welcomed the idea of a minuscule subsidy fee to guarantee the people that wanted RoG base kits didn't have to spend more than a RoW/WoR combo for that specific color combo. Of course, if you feel this is in error for you specifically or that you specifically shouldn't share in the burden I can rectify that situation.

As to shipping, the default is flat rate priority but I also have supplies like tape, paper, printer ink and other BS ilk that would be considered business cost elsewhere and not passed along.

As to the good news, I've received 53 payments already.

Offline TypoVampire

  • Posts: 27
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1271 on: Fri, 15 February 2013, 01:37:45 »
I think my invoice is slightly off.
I asked for RoW base, WoR mods + b series number row with combined shipping, however I've been charged $121 USD. Isn't $23 + $23 + $35 + $26 = $107?

Offline LechnerDE

  • * Esteemed Elder
  • Posts: 2631
  • Location: Germany
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1272 on: Fri, 15 February 2013, 01:42:47 »
Hey TJ,

I received the invoice but there is one little mistake in it.

Instead of     RoW tsangan      it has to be     WoR tsangan

(see post #1174 in this thread)

You replied to this and wrote you changed it, but I guess you had my invoice prepared before that.

Please modify it! I will pay as soon as I get a new invoice :)

Thanks for all your efforts!

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1273 on: Fri, 15 February 2013, 01:52:43 »
I think my invoice is slightly off.
I asked for RoW base, WoR mods + b series number row with combined shipping, however I've been charged $121 USD. Isn't $23 + $23 + $35 + $26 = $107?

B-series was $37, not $35, that brings you to $109

On top of that, there's a paypal's handling fee ($3.83), so you're at $112.83.

In addition, there's the geekhack pack ($2, but can be removed if you don't want the 3 pack of geekhack logo keys), RoG base kit subsidy ($3), which has been discussed and explained recently enough, sorting ($2), cause seriously, there's going to be an enormous box of caps at my house that will need to be put into smaller boxes and shipped, and my caps ($1.50).

That's a total of $8.50 in misc fees and that puts you at $121.33.  I can remove the gh key pack from your order to save you the $2, but this (all the misc) isn't something I just threw in for giggles and in the case of paypal fees, is pretty much an unavoidable thing.

Hey TJ,

I received the invoice but there is one little mistake in it.

Instead of     RoW tsangan      it has to be     WoR tsangan

(see post #1174 in this thread)

You replied to this and wrote you changed it, but I guess you had my invoice prepared before that.

Please modify it! I will pay as soon as I get a new invoice :)

Thanks for all your efforts!

AMG, your eagle eye has offended me!!

Just kidding, fixed.  It's entirely possible that's what's happened on the orders that I've had to edit in general.   Also, I've got my mouse bound to certain key words and it's entirely possible I hit the wrong one or got off a line on the order spreadsheet.

Also, no one worry about notating your GH stuff as I've got it on the memo line in all invoices (invisible to you) and the spreadsheet with paypal/gh IDs.  Paypal should give me an address, but I'll contact you if not.

Offline danielucf

  • Horrible Mailman
  • * Elevated Elder
  • Posts: 2479
  • Location: Orlando
  • Hmmmm beer.
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1274 on: Fri, 15 February 2013, 02:06:48 »
Paid. RoG is going to be so baller.
VE.A 67g Zealios | GH60 MX Clears |

Offline okooko

  • Posts: 476
  • Location: Australia
  • afk.
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1275 on: Fri, 15 February 2013, 02:24:04 »

To get 30 orders, I need $1350, as you say.  Since price was capped at $30/set, that means those 30 people would have only given me $900.  That leaves a balance due of $450 spread across ~150 orders.  I had a lot of people ask me to remove their orders on top of the 20someodd that were deleted today.


well explained, understood

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1276 on: Fri, 15 February 2013, 02:28:42 »
Paid. RoG is going to be so baller.

I'm actually more excited to see RoG now than the reason I started this; WoR base sets.

Also, already at 58 paid. 
« Last Edit: Fri, 15 February 2013, 02:32:43 by tjcaustin »

Offline Halverson

  • Traitor Supreme
  • Posts: 6811
  • GIRLSHARK WIZBRO
[GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1277 on: Fri, 15 February 2013, 02:33:34 »
I just want to say, every single person paying a few bucks extra for RoG sets, thank you! Without all of you, I'd never have bothered to get this set!

Much love!

Offline bugsaint

  • Posts: 50
  • Location: London, UK
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1278 on: Fri, 15 February 2013, 02:55:44 »
Paid in full

Offline TypoVampire

  • Posts: 27
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1279 on: Fri, 15 February 2013, 03:18:11 »
I think my invoice is slightly off.
I asked for RoW base, WoR mods + b series number row with combined shipping, however I've been charged $121 USD. Isn't $23 + $23 + $35 + $26 = $107?

B-series was $37, not $35, that brings you to $109

On top of that, there's a paypal's handling fee ($3.83), so you're at $112.83.

In addition, there's the geekhack pack ($2, but can be removed if you don't want the 3 pack of geekhack logo keys), RoG base kit subsidy ($3), which has been discussed and explained recently enough, sorting ($2), cause seriously, there's going to be an enormous box of caps at my house that will need to be put into smaller boxes and shipped, and my caps ($1.50).

That's a total of $8.50 in misc fees and that puts you at $121.33.  I can remove the gh key pack from your order to save you the $2, but this (all the misc) isn't something I just threw in for giggles and in the case of paypal fees, is pretty much an unavoidable thing.

Just take out the $2 pack if you can. $2 is $2 T_T. Will pay invoice in full when received.

Offline GeorgeK

  • Posts: 758
  • Location: Ashford, Kent, United Kingdom
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1280 on: Fri, 15 February 2013, 03:18:45 »
Lol - just reading these posts I realised that I'd forgotten about the fact that I'd also put in for a B-Series number row! (which I paid for separately)  Don't forget to put them in the (massive) box! 

Impressed with how this is going - congrats to tj from here!
Black Filco TKL - Stickered, Lubed Reds || Poker w/Plate, Alu Case -  Stickered, Lubed 65g Ergo-Clears || Cherry G80-3700 w/SS Plate - Lubed 65g Ergo-Clears

Offline adigaforever

  • Posts: 45
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1281 on: Fri, 15 February 2013, 03:23:23 »
Woot Soulkey(BW, now SC2 player) just ordered some keys?  :eek:
Btw, TJ well done sir!

Offline ApocalypseMaow

  • Kitteh Overlord
  • Posts: 1877
  • Location: Arkansas
  • Say WHAAT...
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1282 on: Fri, 15 February 2013, 03:34:53 »
Paid. RoG is going to be so baller.
My thoughts exactly! ;D
{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015

Offline beauthegamer

  • Posts: 26
  • Location: Washington, USA
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1283 on: Fri, 15 February 2013, 04:00:36 »
Paid. Can't wait until they start shipping!
Filco Majestouch 2 Ninja with wood blue case and reds | HHKB Pro II non-printed black | Phantom with ergo clears

Offline rafael vale

  • Posts: 3
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1284 on: Fri, 15 February 2013, 05:01:58 »
Just paid  :D

Offline simkev

  • Posts: 103
  • Location: 127.0.0.1 - SWEDEN
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1285 on: Fri, 15 February 2013, 06:09:56 »
Paid
JAG ÄR LIVRÄDD FÖR ATT LEVA & JAG ÄR DÖDSRÄDD FÖR ATT DÖ

| Poker X - Ergo Clears & Red Alert 2.0 | Majestouch 2 TKL - Browns & Blue Cream Cheese |


Offline Sai

  • Posts: 820
  • Location: SG
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1286 on: Fri, 15 February 2013, 06:17:21 »
tj, check ur pm pls.
- WTB/WTT - Cotton Candy Brobot V2

Offline Turkishrambo

  • Posts: 483
  • Location: ontario canada
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1287 on: Fri, 15 February 2013, 06:17:50 »
TJ can u confirm that u recieved my payment nad shipping info.

Again, i forgot to fill in my stuff in the notes so i pmed u the transaction id and such

THanks :D

Offline MKULTRA

  • Posts: 1197
  • Location: IN
  • telling it how it is
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1288 on: Fri, 15 February 2013, 07:35:11 »
Good job with this group buy. Seeing the prices makes me wish I woulda gotten in on it.

Offline Supergleep

  • Posts: 56
  • Location: Potato State
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1289 on: Fri, 15 February 2013, 07:44:56 »
Invoice paid. Thanks for all your work TJ  :)
Filco Tenkeyless - Daily Driver  |  Filco Linear R - 87  | Filco 104 Ninja

Offline dragonken

  • Posts: 105
  • Location: Hong Kong
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1290 on: Fri, 15 February 2013, 07:48:25 »
tj. Please check PM. Please send invoice to me and Thanks.

Offline j2c8w6f8

  • Posts: 115
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1291 on: Fri, 15 February 2013, 08:01:14 »
Paid! ;D

Offline inteli722

  • Posts: 858
  • Location: America
  • Waiting for too much stuff...
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1292 on: Fri, 15 February 2013, 08:12:29 »
i
Good job with this group buy. Seeing the prices makes me wish I woulda gotten in on it.

I believe you still can, you just can't change the prices with a massive order.
More

Visit the Typing Test and try!
R.I.P. SmallFry! You will be dearly missed.
Leopold FC200 |  CoolerMaster QFP Browns | Quickfire Rapid Greens | Quickfire Rapid Blues
Waiting for: Phantom Plate

Offline MKULTRA

  • Posts: 1197
  • Location: IN
  • telling it how it is
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1293 on: Fri, 15 February 2013, 09:14:14 »
Well I filled out the form for RoW base and RoG mods!

Offline Turkishrambo

  • Posts: 483
  • Location: ontario canada
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1294 on: Fri, 15 February 2013, 09:18:04 »
Well I filled out the form for RoW base and RoG mods!

Orders closed a long time ago, not sure if youll get in. O:

Offline MKULTRA

  • Posts: 1197
  • Location: IN
  • telling it how it is
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1295 on: Fri, 15 February 2013, 09:26:13 »
Well I filled out the form for RoW base and RoG mods!

Orders closed a long time ago, not sure if youll get in. O:
Yeah I know.  I understand if its too late.  Not really a big deal.

Offline Emmiya

  • Posts: 132
  • Location: Hull - United Kingdom.
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1296 on: Fri, 15 February 2013, 10:02:07 »
So... I think the question we're all wondering now is:

Do we get to see awesome pictures of them arriving/you sorting them out ? :D
Also, I could understand if the people who are complaining about the RoG base subsidy weren't actually ordering the set, but everyone who has complained thus far, has a RoG base kit in their order >.<

Offline SwissFTW

  • Posts: 42
  • Location: Louisiana
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1297 on: Fri, 15 February 2013, 10:04:23 »
Paid! Can't wait to get this set in. First GB and first set of custom keycaps! My pure is going to look so legit...

   WhiteFox  | HHKB Pro 2 | KBT Pure MX Browns | CM Storm MX Browns | Ducky YOTD MX Browns | Ducky Shine II MX Browns
    TrueFox

Offline okooko

  • Posts: 476
  • Location: Australia
  • afk.
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1298 on: Fri, 15 February 2013, 10:06:36 »
All piad for, thanks TJ

Offline cytoSiN

  • Posts: 185
  • Location: NYC
  • ATCG
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1299 on: Fri, 15 February 2013, 10:11:56 »
So... I think the question we're all wondering now is:

Do we get to see awesome pictures of them arriving/you sorting them out ? :D
Also, I could understand if the people who are complaining about the RoG base subsidy weren't actually ordering the set, but everyone who has complained thus far, has a RoG base kit in their order >.<

Paid.  And not that I'm complaining, but I didn't order RoG, and I admit I stopped reading every post in this thread a LONG time ago, so I was surprised to see the RoG "subsidy" on my invoice, but at the end of the day, $64 shipped for a full set of double shots is a good deal, especially when I don't have do a goddam thing and they will magically appear at my doorstep.  In my opinion, everyone here should be lining up to kiss TJ's ass.
Model M 1391401 1989 || Ducky DK9008G2 Pro LE || XArmor U9BL-S LED || CM Storm QuickFire Rapid