Author Topic: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time  (Read 410379 times)

0 Members and 1 Guest are viewing this topic.

Offline inteli722

  • Posts: 858
  • Location: America
  • Waiting for too much stuff...
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1700 on: Fri, 05 April 2013, 23:51:35 »
I would like to see similar sets, but with different colors in place of Red. Maybe Orange next year, then Blue, then Green, etc.
More

Visit the Typing Test and try!
R.I.P. SmallFry! You will be dearly missed.
Leopold FC200 |  CoolerMaster QFP Browns | Quickfire Rapid Greens | Quickfire Rapid Blues
Waiting for: Phantom Plate

Offline ApocalypseMaow

  • Kitteh Overlord
  • Posts: 1877
  • Location: Arkansas
  • Say WHAAT...
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1701 on: Sat, 06 April 2013, 04:29:16 »
I would like to see similar sets, but with different colors in place of Red. Maybe Orange next year, then Blue, then Green, etc.
Oh, sounds good too!
{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015

Offline realex

  • Posts: 70
  • Location: Bavaria, Germany
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1702 on: Sat, 06 April 2013, 06:13:50 »
wondering how he did it this fast? well here's proof he cloned himself, resulting in the simultaneous existence of at least two tjcaustins:





Offline lbwmoo

  • Posts: 9
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1703 on: Sat, 06 April 2013, 09:50:45 »
Don't suppose there's any chance other people in Dallas area could just pick up, and save you the shipping money? *wink wink nudge nudge nough said nough said*

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1704 on: Sat, 06 April 2013, 11:04:07 »
wondering how he did it this fast? well here's proof he cloned himself, resulting in the simultaneous existence of at least two tjcaustins:

Show Image


I was wondering how it looked when I had both my media PC and laptop on gh at once.

Don't suppose there's any chance other people in Dallas area could just pick up, and save you the shipping money? *wink wink nudge nudge nough said nough said*

PSH.  Maybe.  I think I have two people besides myself in Dallas, but I'd have to look again.

Offline redeye

  • Posts: 128
  • Location: Teddington, England
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1705 on: Sun, 07 April 2013, 07:17:38 »
i'll take a leftover iso if one's available?

Offline Krogenar

  • The Kontrarian
  • * Esteemed Elder
  • Posts: 1266
  • Location: Eastchester, NY
  • "DO NOT BRING YOUR EVIL HERE." -Swamp Thing
    • Buried Planet
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1706 on: Sun, 07 April 2013, 07:27:24 »
I would vote for Zombie Reagan
Over Obama any day!

I would accept a cardboard cutout of Reagan over Obama. ... ok, pretty much any kind of inanimate object would do.
GeekHack Artwork Resources | The Living GeekHack Logo Thread | Signature Plastics ABS Chip Scanning Project | Krog Flocks Around | Keyboard Color Scheme Archive | [GB] PBT DyeSub DSA Granite Set
More
Quote from: Samuel Adams
"If ye love wealth better than liberty, the tranquility of servitude better than the animating contest of freedom, go home from us in peace. We ask not your counsels or your arms. Crouch down and lick the hands which feed you. May your chains set lightly upon you, and may posterity forget that you were our countrymen."

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1707 on: Sun, 07 April 2013, 11:31:45 »
i'll take a leftover iso if one's available?

I'll put leftovers up once I've got everything else settled.

Offline Neal

  • Posts: 301
  • Location: The Netherlands
  • Skype: iNewbcake
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1708 on: Sun, 07 April 2013, 18:25:01 »
Shame I missed this, stalking thread for leftovers. :)

Offline j2c8w6f8

  • Posts: 115
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1709 on: Mon, 08 April 2013, 04:36:59 »
Waiting for WoR mods/tsangan.   :p

Offline Muffet

  • Posts: 55
  • Location: Marquette, MI
  • Man of many paths
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1710 on: Mon, 08 April 2013, 05:56:56 »
I am extremely interested in a RoW or WoR Base set if anyone decides they aren't interested in them anymore.

     Painted QFR    Cherry ML for Work

Offline sdiearly

  • Posts: 178
  • Location: Taiwan
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1711 on: Mon, 08 April 2013, 06:05:05 »
i'll take a leftover iso if one's available?

I'll put leftovers up once I've got everything else settled.

Hope I can get a full set of your leftovers.
My favorite 60%:  TEX-Beetle
                 80%:  KBtalKing Race
                100%: Cherry G80-3494, Zowie Celeritas

Offline matt1986

  • Posts: 2
  • Location: Sydney
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1712 on: Mon, 08 April 2013, 09:11:58 »
Looking for a set of WoR mods if anyone has extras they're looking to sell on. Shoot me a PM if interested!

Offline Dubsgalore

  • Banned
  • Posts: 2849
  • Location: 75% You have received a warning for attempting to circumvent the classifieds rules
    • Dubs - Sneakers, Keyboards, and Life
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1713 on: Mon, 08 April 2013, 11:07:11 »
Was this Red on White? or Red on Grey? if Red on White...i am looking to buy a leftover Alpha set with white Mods and white Tsangan

Offline inteli722

  • Posts: 858
  • Location: America
  • Waiting for too much stuff...
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1714 on: Mon, 08 April 2013, 11:38:17 »
Was this Red on White? or Red on Grey? if Red on White...i am looking to buy a leftover Alpha set with white Mods and white Tsangan

White on Red, Red on White and Red on Grey :D
More

Visit the Typing Test and try!
R.I.P. SmallFry! You will be dearly missed.
Leopold FC200 |  CoolerMaster QFP Browns | Quickfire Rapid Greens | Quickfire Rapid Blues
Waiting for: Phantom Plate

Offline Emmiya

  • Posts: 132
  • Location: Hull - United Kingdom.
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1715 on: Mon, 08 April 2013, 12:20:17 »
Dayum, they're looking sweet :o even more excited now.
Did you happen to get a picture of RoW at all ?:P or just the RoG/WoR.

Also, slightly off-topic, but don't suppose you know if there's a low-profile Pure case like the Poker one you have here do you?

Offline Dubsgalore

  • Banned
  • Posts: 2849
  • Location: 75% You have received a warning for attempting to circumvent the classifieds rules
    • Dubs - Sneakers, Keyboards, and Life
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1716 on: Mon, 08 April 2013, 12:24:56 »
Was this Red on White? or Red on Grey? if Red on White...i am looking to buy a leftover Alpha set with white Mods and white Tsangan

White on Red, Red on White and Red on Grey :D

X( I am so sad I am missed this

Think I can get any leftovers?

Offline elton5354

  • Posts: 2232
  • Location: Canada
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1717 on: Mon, 08 April 2013, 12:37:02 »
Dayum, they're looking sweet :o even more excited now.
Did you happen to get a picture of RoW at all ?:P or just the RoG/WoR.

Also, slightly off-topic, but don't suppose you know if there's a low-profile Pure case like the Poker one you have here do you?

You can use a poker and pure case interchangeably

Offline realex

  • Posts: 70
  • Location: Bavaria, Germany
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1718 on: Mon, 08 April 2013, 12:51:21 »
the case in the picture actually is the vortex pure alu case - it just fits both pure and poker, as well as gh60.


Offline SwissFTW

  • Posts: 42
  • Location: Louisiana
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1719 on: Mon, 08 April 2013, 13:13:45 »
the case in the picture actually is the vortex pure alu case - it just fits both pure and poker, as well as gh60.

Is this case purchasable anywhere? Or would I need to find someone selling one in classifieds and such?

   WhiteFox  | HHKB Pro 2 | KBT Pure MX Browns | CM Storm MX Browns | Ducky YOTD MX Browns | Ducky Shine II MX Browns
    TrueFox

Offline Kabuks

  • Posts: 220
  • Location: Canada
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1720 on: Mon, 08 April 2013, 13:15:32 »
That red doesn't seem as close to the RA 2.0 red as I thought it would be. I guess it could just be the lighting though.
« Last Edit: Mon, 08 April 2013, 14:33:30 by Kabuks »

Offline danielucf

  • Horrible Mailman
  • * Elevated Elder
  • Posts: 2479
  • Location: Orlando
  • Hmmmm beer.
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1721 on: Mon, 08 April 2013, 13:27:28 »
That red doesn't seem as close to the RA 2.0 red as I thought it would be. I guess I could just be the lighting though.
I think it is the lighting and white balance because the RoG mock ups look very different and should be the same coloring.
VE.A 67g Zealios | GH60 MX Clears |

Offline inteli722

  • Posts: 858
  • Location: America
  • Waiting for too much stuff...
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1722 on: Mon, 08 April 2013, 13:33:30 »
It isn't an identical red, just a similar one. It shouldn't look identical
More

Visit the Typing Test and try!
R.I.P. SmallFry! You will be dearly missed.
Leopold FC200 |  CoolerMaster QFP Browns | Quickfire Rapid Greens | Quickfire Rapid Blues
Waiting for: Phantom Plate

Offline jdcarpe

  • * Curator
  • Posts: 8852
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1723 on: Mon, 08 April 2013, 13:41:49 »
Actually, it should look pretty damn close to identical. Except without the plastic swirls this time. :D
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline adigaforever

  • Posts: 45
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1724 on: Mon, 08 April 2013, 16:26:22 »
But... but... I wanted to see pictures of a room full of keys. :\
OP will surely deliver

Offline Leslieann

  • * Elevated Elder
  • Posts: 4566
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1725 on: Mon, 08 April 2013, 16:33:07 »
Actually, it should look pretty damn close to identical. Except without the plastic swirls this time. :D
Plastic swirls? I imagien that must have been R.A.1.

I have R.A.2 and while I can't find swirls, the " key is bold.
Novelkeys NK65AE w/62g Zilents/39g springs
More
62g Zilents/lubed/Novelkeys 39g springs, HK Gaming Thick PBT caps, Netdot Gen10 magnetic cable, pic
| Filco MJ2 L.E. Vortex Case, Jailhouse Blues, heavily customized
More
Vortex case squared up/blasted finish removed/custom feet/paint/winkey blockoff plate, HID Liberator, stainless steel universal plate, 3d printed adapters, Type C, Netdot Gen10 magnetic cable, foam sound dampened, HK Gaming Thick PBT caps (o-ringed), Cherry Jailhouse Blues w/lubed/clipped Cherry light springs, 40g actuation
| GMMK TKL
More
w/ Kailh Purple Pros/lubed/Novelkeys 39g springs, HK Gaming Thick PBT caps, Netdot Gen10 Magnetic cable
| PF65 3d printed 65% w/LCD and hot swap
More
Box Jades, Interchangeable trim, mini lcd, QMK, underglow, HK Gaming Thick PBT caps, O-rings, Netdot Gen10 magnetic cable, in progress link
| Magicforce 68
More
MF68 pcb, Outemu Blues, in progress
| YMDK75 Jail Housed Gateron Blues
More
J-spacers, YMDK Thick PBT, O-rings, SIP sockets
| KBT Race S L.E.
More
Ergo Clears, custom WASD caps
| Das Pro
More
Costar model with browns
| GH60
More
Cherry Blacks, custom 3d printed case
| Logitech Illumininated | IBM Model M (x2)
Definitive Omron Guide. | 3d printed Keyboard FAQ/Discussion

Offline jdcarpe

  • * Curator
  • Posts: 8852
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1726 on: Mon, 08 April 2013, 16:35:36 »
Actually, it should look pretty damn close to identical. Except without the plastic swirls this time. :D
Plastic swirls? I imagien that must have been R.A.1.

I have R.A.2 and while I can't find swirls, the " key is bold.

Some of my WoR RA 2.0 mods have swirls where you can tell the plastic didn't mix well. It's not that noticeable, but I can tell.
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1727 on: Mon, 08 April 2013, 18:29:08 »
As is buried in this thread somewhere, the red used in Klaxon is the reformulated, more uniform blend that was in RA2.0.

As to the picture, that's my light source and not having my new camera set up completely correctly.
the case in the picture actually is the vortex pure alu case - it just fits both pure and poker, as well as gh60.

Is this case purchasable anywhere? Or would I need to find someone selling one in classifieds and such?

Classifieds or buying a full pure aluminum.

And to all asking, I'll have left overs up as soon as I can.  Plus a pic or two of my living room right now.

Offline polarpigs

  • Posts: 29
  • Location: San Diego
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1728 on: Tue, 09 April 2013, 07:41:15 »
Plus a pic or two of my living room right now.

YES PLEASE!

Offline MKULTRA

  • Posts: 1197
  • Location: IN
  • telling it how it is
[GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1729 on: Tue, 09 April 2013, 07:48:29 »
Are the caps shipped?

Offline inteli722

  • Posts: 858
  • Location: America
  • Waiting for too much stuff...
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1730 on: Tue, 09 April 2013, 08:09:03 »
Are the caps shipped?

Well, considering he said:

Plus a pic or two of my living room right now.

I would assume that they aren't, but they're being prepared to ship soon. However, you know what they say about assumptions...
More

Visit the Typing Test and try!
R.I.P. SmallFry! You will be dearly missed.
Leopold FC200 |  CoolerMaster QFP Browns | Quickfire Rapid Greens | Quickfire Rapid Blues
Waiting for: Phantom Plate

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1731 on: Tue, 09 April 2013, 14:04:26 »
That you're correct?

I need to contact those that are sans geekhack keys, but shipping will commence today.

Offline mashby

  • ** Moderator Emeritus
  • Posts: 2828
  • Location: Nashville, TN
  • What Up Shoney? (ツ)_/¯
    • Mashby
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1732 on: Tue, 09 April 2013, 14:17:55 »
That you're correct?

I need to contact those that are sans geekhack keys, but shipping will commence today.


Offline MadScientist46

  • Posts: 126
  • Location: Germany
  • Snaged his first CCs -> HappyScientist now ^_^
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1733 on: Tue, 09 April 2013, 14:59:52 »
That you're correct?

I need to contact those that are sans geekhack keys, but shipping will commence today.

Noppoo Choc mini MX-Reds | KBT Pure MX-Reds/Green LEDs

Offline inteli722

  • Posts: 858
  • Location: America
  • Waiting for too much stuff...
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1734 on: Tue, 09 April 2013, 15:17:44 »
but shipping will commence today.

I believe this calls for GMod Nonsense!

More

Visit the Typing Test and try!
R.I.P. SmallFry! You will be dearly missed.
Leopold FC200 |  CoolerMaster QFP Browns | Quickfire Rapid Greens | Quickfire Rapid Blues
Waiting for: Phantom Plate

Offline Leslieann

  • * Elevated Elder
  • Posts: 4566
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1735 on: Tue, 09 April 2013, 15:32:34 »
Some of my WoR RA 2.0 mods have swirls where you can tell the plastic didn't mix well. It's not that noticeable, but I can tell.

Under bright lighting I can see it now, a few (alt and winkeys in particular) look slightly marbleized. Very, very faint though.
Novelkeys NK65AE w/62g Zilents/39g springs
More
62g Zilents/lubed/Novelkeys 39g springs, HK Gaming Thick PBT caps, Netdot Gen10 magnetic cable, pic
| Filco MJ2 L.E. Vortex Case, Jailhouse Blues, heavily customized
More
Vortex case squared up/blasted finish removed/custom feet/paint/winkey blockoff plate, HID Liberator, stainless steel universal plate, 3d printed adapters, Type C, Netdot Gen10 magnetic cable, foam sound dampened, HK Gaming Thick PBT caps (o-ringed), Cherry Jailhouse Blues w/lubed/clipped Cherry light springs, 40g actuation
| GMMK TKL
More
w/ Kailh Purple Pros/lubed/Novelkeys 39g springs, HK Gaming Thick PBT caps, Netdot Gen10 Magnetic cable
| PF65 3d printed 65% w/LCD and hot swap
More
Box Jades, Interchangeable trim, mini lcd, QMK, underglow, HK Gaming Thick PBT caps, O-rings, Netdot Gen10 magnetic cable, in progress link
| Magicforce 68
More
MF68 pcb, Outemu Blues, in progress
| YMDK75 Jail Housed Gateron Blues
More
J-spacers, YMDK Thick PBT, O-rings, SIP sockets
| KBT Race S L.E.
More
Ergo Clears, custom WASD caps
| Das Pro
More
Costar model with browns
| GH60
More
Cherry Blacks, custom 3d printed case
| Logitech Illumininated | IBM Model M (x2)
Definitive Omron Guide. | 3d printed Keyboard FAQ/Discussion

Offline jdcarpe

  • * Curator
  • Posts: 8852
  • Location: Odessa, TX
  • Live long, and prosper.
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1736 on: Tue, 09 April 2013, 15:38:03 »
Some of my WoR RA 2.0 mods have swirls where you can tell the plastic didn't mix well. It's not that noticeable, but I can tell.

Under bright lighting I can see it now, a few (alt and winkeys in particular) look slightly marbleized. Very, very faint though.

And now it bugs you, huh? :P
KMAC :: LZ-GH :: WASD CODE :: WASD v2 :: GH60 :: Alps64 :: JD45 :: IBM Model M :: IBM 4704 "Pingmaster"

http://jd40.info :: http://jd45.info


in memoriam

"When I was a kid, I used to take things apart and never put them back together."

Offline SwissFTW

  • Posts: 42
  • Location: Louisiana
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1737 on: Tue, 09 April 2013, 15:38:24 »
but shipping will commence today.

I believe this calls for GMod Nonsense!




ROFL. 10/10

   WhiteFox  | HHKB Pro 2 | KBT Pure MX Browns | CM Storm MX Browns | Ducky YOTD MX Browns | Ducky Shine II MX Browns
    TrueFox

Offline Leslieann

  • * Elevated Elder
  • Posts: 4566
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1738 on: Tue, 09 April 2013, 15:45:26 »
Some of my WoR RA 2.0 mods have swirls where you can tell the plastic didn't mix well. It's not that noticeable, but I can tell.

Under bright lighting I can see it now, a few (alt and winkeys in particular) look slightly marbleized. Very, very faint though.

And now it bugs you, huh? :P
No, like I said, it;s under bright lighting, I had to hold an LED flashlight up to it to see it.  Besides, I paid $45 for the set.  :))

Actually the bold font on the " key is far more noticeable.

Novelkeys NK65AE w/62g Zilents/39g springs
More
62g Zilents/lubed/Novelkeys 39g springs, HK Gaming Thick PBT caps, Netdot Gen10 magnetic cable, pic
| Filco MJ2 L.E. Vortex Case, Jailhouse Blues, heavily customized
More
Vortex case squared up/blasted finish removed/custom feet/paint/winkey blockoff plate, HID Liberator, stainless steel universal plate, 3d printed adapters, Type C, Netdot Gen10 magnetic cable, foam sound dampened, HK Gaming Thick PBT caps (o-ringed), Cherry Jailhouse Blues w/lubed/clipped Cherry light springs, 40g actuation
| GMMK TKL
More
w/ Kailh Purple Pros/lubed/Novelkeys 39g springs, HK Gaming Thick PBT caps, Netdot Gen10 Magnetic cable
| PF65 3d printed 65% w/LCD and hot swap
More
Box Jades, Interchangeable trim, mini lcd, QMK, underglow, HK Gaming Thick PBT caps, O-rings, Netdot Gen10 magnetic cable, in progress link
| Magicforce 68
More
MF68 pcb, Outemu Blues, in progress
| YMDK75 Jail Housed Gateron Blues
More
J-spacers, YMDK Thick PBT, O-rings, SIP sockets
| KBT Race S L.E.
More
Ergo Clears, custom WASD caps
| Das Pro
More
Costar model with browns
| GH60
More
Cherry Blacks, custom 3d printed case
| Logitech Illumininated | IBM Model M (x2)
Definitive Omron Guide. | 3d printed Keyboard FAQ/Discussion

Offline Glod

  • * Elevated Elder
  • Posts: 1998
  • Location: Virginia, USA
  • Also Known As Ergonomech
    • YouTube Channel
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1739 on: Tue, 09 April 2013, 15:48:36 »
That you're correct?

I need to contact those that are sans geekhack keys, but shipping will commence today.

Show Image


no sir, its oh my GLOD!

damn these were meant for my phantom, but without it i guess ill have to find something else to put them on...lolol

Offline tauburn

  • Posts: 447
  • Location: Philadelphia
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1740 on: Tue, 09 April 2013, 19:12:08 »
tjs waiting until may 8th to ship so that he can say the groupbuy was half a year long

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1741 on: Tue, 09 April 2013, 19:13:13 »
Well, duh :P

That way, I can say that Orange Madness was a huge success for taking half the time to complete.

In full disclosure, paypal and usps has fought me at every damn turn.
« Last Edit: Tue, 09 April 2013, 19:20:19 by tjcaustin »

Offline tauburn

  • Posts: 447
  • Location: Philadelphia
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1742 on: Tue, 09 April 2013, 19:22:03 »
Well, duh :P

That way, I can say that Orange Madness was a huge success for taking half the time to complete.

In full disclosure, paypal and usps has fought me at every damn turn.

what was usps' problem? maybe this groupbuy just wasnt meant to be

Offline Sai

  • Posts: 820
  • Location: SG
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1743 on: Tue, 09 April 2013, 19:51:13 »
i just got the notification. :)
- WTB/WTT - Cotton Candy Brobot V2

Offline okooko

  • Posts: 476
  • Location: Australia
  • afk.
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1744 on: Tue, 09 April 2013, 19:54:53 »
Well, duh :P

That way, I can say that Orange Madness was a huge success for taking half the time to complete.

In full disclosure, paypal and usps has fought me at every damn turn.

king klaxon too stronk fo dat shiet. lol
nice to see it coming along nicely.

Offline tjcaustin

  • King Klaxon
  • * Maker
  • Thread Starter
  • Posts: 3557
  • Location: Dallas-ish
  • King of All Klaxon Sciences and Cable Makery
    • Buy stuff
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1745 on: Tue, 09 April 2013, 19:59:51 »
Well, duh :P

That way, I can say that Orange Madness was a huge success for taking half the time to complete.

In full disclosure, paypal and usps has fought me at every damn turn.

what was usps' problem? maybe this groupbuy just wasnt meant to be

Can't do batch shipping, paypal's multi-shipping is down, and every 2 - 4 people I have to refresh my connection to paypal.

Offline Rare

  • Posts: 51
  • Spending racks and bands on keyboards.
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1746 on: Tue, 09 April 2013, 20:06:22 »
It seems like you're just making a bunch of excuses when you could be out shipping these gentlemen their caps!
Saber 68 (MOD-H)
my glo

Offline yellertoof

  • Posts: 5
  • Location: United States
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1747 on: Tue, 09 April 2013, 20:50:36 »
What a delightful email I just received from paypal.  Well done Mr. Caustin!

Offline MKULTRA

  • Posts: 1197
  • Location: IN
  • telling it how it is
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1748 on: Tue, 09 April 2013, 20:57:37 »
It seems like you're just making a bunch of excuses when you could be out shipping these gentlemen their caps!
not really.

Offline Rare

  • Posts: 51
  • Spending racks and bands on keyboards.
Re: [GB] Klaxon! The RA2.0 clone - Orders closed! Invoicing/revision time
« Reply #1749 on: Tue, 09 April 2013, 21:07:43 »
It seems like you're just making a bunch of excuses when you could be out shipping these gentlemen their caps!
not really.

How? He's had them in his possession for a little while and he could have taken em all to the post office and shipped em. The post office provides boxes and pens to write the address down.
Saber 68 (MOD-H)
my glo