Author Topic: [IC] LZ-GH Keyboard (Read 136557 times)

WRXChris · « **Reply #300 on:** Fri, 18 January 2013, 13:42:42 »

I'm so excited about this!! red 84-key is looking soooo sexy! I sure hope im lucky enough to get one, thanks boost and lz and the rest of the redline crew for bringing these to us!

boost · « **Reply #301 on:** Fri, 18 January 2013, 14:00:45 »

Going to add Diodes and stabilizers to the set

Acetrak · « **Reply #302 on:** Fri, 18 January 2013, 14:06:40 »

boost · « **Reply #303 on:** Fri, 18 January 2013, 14:07:00 »

Quote from: boost on Tue, 15 January 2013, 09:32:44

Specs:

Case:
Modified version of the LZ-S with the weight @ 5lbs
Bar feet design

Plate:
Modified version of the LZ-S

Type:
84key - 1.5/1.5/7/1.5/1.5
86key - 1.5/1/1.5/7/1.5/1/1.5

Color:
Black
Metal Grey
Red

Price:
??

ETA:
??

What's included:
LZ-GH Case
LZ-GH Plate(red)
90 Diodes
Complete set of cherry PCB mount stabilizers

What you need:

Cherry MX Switches

Services

Solder - $35 (done by Alaric!!!!)

Notes

This plate is modified to mod switches without desoldering!!!

Show Image

Show Image

Updated!!

cgbuen · « **Reply #304 on:** Fri, 18 January 2013, 14:54:03 »

Sounds exciting! Would love a shot at a black or metal grey one, if it's a limited run.

boost · « **Reply #305 on:** Fri, 18 January 2013, 14:57:17 »

Fyi, the bar feet can be rotated to change the keyboard slope/angle.

pasph · « **Reply #306 on:** Fri, 18 January 2013, 15:07:49 »

The controller?

jdcarpe · « **Reply #307 on:** Fri, 18 January 2013, 15:07:50 »

Except for one small detail, this would be my ultimate keyboard. I wish for the pyramid foot instead of the bar foot, now. But like Mick Jagger said, you can't always get what you want.

boost · « **Reply #308 on:** Fri, 18 January 2013, 15:10:46 »

Quote from: pasph on Fri, 18 January 2013, 15:07:49

The controller?

aikon...

nebo · « **Reply #309 on:** Fri, 18 January 2013, 15:11:45 »

Oh man, the renders. My wallet hurts so much right now!

jwaz · « **Reply #310 on:** Fri, 18 January 2013, 15:12:18 »

Quote from: boost on Fri, 18 January 2013, 15:10:46

Quote from: pasph on Fri, 18 January 2013, 15:07:49
The controller?

aikon...

TheProfosist · « **Reply #311 on:** Fri, 18 January 2013, 15:24:07 »

is it going to have some sort of GUI for programming?

alaricljs · « **Reply #312 on:** Fri, 18 January 2013, 15:35:55 »

Aikon has a gui, yes.

whiskerBox · « **Reply #313 on:** Fri, 18 January 2013, 15:38:16 »

Oh man thats great that it includes stabilizers! Those were hard to find for KMAC

Leewei · « **Reply #314 on:** Fri, 18 January 2013, 15:44:01 »

Heya boost, it says on the site that the plate will be silver color.

Patchwrks · « **Reply #315 on:** Fri, 18 January 2013, 15:46:44 »

The PCB will be included or no?

TheProfosist · « **Reply #316 on:** Fri, 18 January 2013, 15:47:39 »

Quote from: patchworks on Fri, 18 January 2013, 15:46:44

The PCB will be included or no?

yes

boost · « **Reply #317 on:** Fri, 18 January 2013, 16:07:00 »

Quote from: Leewei on Fri, 18 January 2013, 15:44:01

Heya boost, it says on the site that the plate will be silver color.

From what I know its.going to be red

nebo · « **Reply #318 on:** Fri, 18 January 2013, 16:09:15 »

Quote from: boost on Fri, 18 January 2013, 16:07:00

Quote from: Leewei on Fri, 18 January 2013, 15:44:01
Heya boost, it says on the site that the plate will be silver color.

From what I know its.going to be red

Oh man, red plate w/ black case. Yeah, it's done often but it looks so good.

tjcaustin · « **Reply #319 on:** Fri, 18 January 2013, 16:09:55 »

Red on red will look good, too (what I want)

MarkPharaoh · « **Reply #320 on:** Fri, 18 January 2013, 16:35:32 »

Well, I know where a good chunk of my tax return is going to go towards...

WhiteFireDragon · « **Reply #321 on:** Fri, 18 January 2013, 18:28:13 »

+1 vote for pyramid feet.

NikoGasm · « **Reply #322 on:** Fri, 18 January 2013, 18:30:00 »

What exactly are pyramid feet? I can't find a picture.

I assume they're the keyboard feet shaped like pyramids, that much is clear. But what makes them special?

reaper · « **Reply #323 on:** Fri, 18 January 2013, 18:40:08 »

Here you go...

Halverson · « **Reply #324 on:** Fri, 18 January 2013, 18:42:37 »

^Now that's hot, and new

reaper · « **Reply #325 on:** Fri, 18 January 2013, 18:44:08 »

Quote from: Halverson on Fri, 18 January 2013, 18:42:37

^Now that's hot, and new AND even more expensive.

fify

TheProfosist · « **Reply #326 on:** Fri, 18 January 2013, 18:51:39 »

should add a bunch of extra weight too

jcrouse · « **Reply #327 on:** Fri, 18 January 2013, 18:53:30 »

If we can give opinions the pyramid feet are ugly to me. Also material costs, mfg costs and lead time would probably be longer.

John

NikoGasm · « **Reply #328 on:** Fri, 18 January 2013, 18:54:52 »

Thank you Reaper. Very clear to me now.

I personally don't like how that looks. But I bet the weight it adds is nice.

TheProfosist · « **Reply #329 on:** Fri, 18 January 2013, 18:55:26 »

Quote from: jcrouse on Fri, 18 January 2013, 18:53:30

If we can give opinions the pyramid feet are ugly to me. Also material costs, mfg costs and lead time would probably be longer.

John

i dont like the alternating colors but thats it

Shadovved · « **Reply #330 on:** Fri, 18 January 2013, 23:10:09 »

I can imagine that in RGB alternating colours, but my wallet disagrees.....

boost · « **Reply #331 on:** Fri, 18 January 2013, 23:18:54 »

Plate is going to be silver not red. Pcb is red

tjcaustin · « **Reply #332 on:** Sat, 19 January 2013, 00:42:03 »

Quote from: boost on Fri, 18 January 2013, 23:18:54

Plate is going to be silver not red. Pcb is red

All of my hate.

Just kidding, will just anodize it.

The_Beast · « **Reply #333 on:** Sat, 19 January 2013, 00:53:31 »

Quote from: boost on Fri, 18 January 2013, 11:28:58

Quote from: The_Beast on Fri, 18 January 2013, 11:12:04
Quote from: boost on Fri, 18 January 2013, 11:07:25
Quote from: The_Beast on Fri, 18 January 2013, 11:03:46
Quote from: Acetrak on Fri, 18 January 2013, 10:56:15
Quote from: Dgsbllx on Fri, 18 January 2013, 10:51:20
Has anyone got any ideas on what it would cost to get the case reanodized? I'm definitely interested in this case, but if I'm dropping some real money (which it sounds like I will have to) I want something more bling!
This will depend on where you live and what options you have available to you. If you are lucky you can find prices around $30-40, I know some places go as high as $100. Keep in mind doing anodizing in low amounts (just 1 keyboard) tend to cost more per unit compare to doing a mass anodizing for a bulk amount.

Yup, I recently got a quote for anodizing, $30 per rack. So a single plate = $30 or 10 plates for $3 each. (10 plates per rack max)

My anodizing shop charges by the lot/tub

Maybe this place can only handle one rack per tub? Does $3 per phantom plate sound like a lot? I thought it was pretty cheap

Didn't get any numbers yet, but will most likely have your shop do the anodizing for the plate.

The anodizing place is different from my laser guy.

agor · « **Reply #334 on:** Sat, 19 January 2013, 05:14:59 »

Hope my wallet kind of agrees with the prize. Really want an Alu Case custom board

limmy · « **Reply #335 on:** Sat, 19 January 2013, 06:14:48 »

Boost,

Your second post doesn't say PCB is included. Reading one of your replies indicate it does. Great group buy!

More demand for winkeyless caps / tsangan kits I suppose..

jdcarpe · « **Reply #336 on:** Sat, 19 January 2013, 08:26:56 »

Really like this image from the RedLine site:

AKIMbO · « **Reply #337 on:** Sat, 19 January 2013, 08:52:21 »

These are going to be amazing but likely incredibly expensive. It's still awesome that redline/LZ is doing this for us! Korea-Geekhack mashup FTW.

Turkishrambo · « **Reply #338 on:** Sat, 19 January 2013, 08:53:47 »

please try and keep the final price with shipping and everything around or under 600$

its my credit card limit

lol

boost · « **Reply #339 on:** Sat, 19 January 2013, 08:59:15 »

Quote from: limmy on Sat, 19 January 2013, 06:14:48

Boost,

Your second post doesn't say PCB is included. Reading one of your replies indicate it does. Great group buy!

More demand for winkeyless caps / tsangan kits I suppose..

Thanks, updated post 2

singaporean123 · « **Reply #340 on:** Sat, 19 January 2013, 09:18:34 »

Quote from: Turkishrambo on Sat, 19 January 2013, 08:53:47

please try and keep the final price with shipping and everything around or under 600$

its my credit card limit lol

I think the price will be more like 250 usd for the case itself..

jcrouse · « **Reply #341 on:** Sat, 19 January 2013, 09:23:34 »

Quote from: jdcarpe on Sat, 19 January 2013, 08:26:56

Really like this image from the RedLine site:

JDC

NICE, I had sent a pm to boost asking if he could get a pic of the three colors. I am on a tiny phone but have to think the middle is the grey and the top the titanium, Yes?

Thanks,
John

jdcarpe · « **Reply #342 on:** Sat, 19 January 2013, 09:26:50 »

The image has transparency, so you might not see the text, depending on the forum theme you're using. Top to bottom is BLACK, METAL GRAY, RED.

tmk1207 · « **Reply #343 on:** Sat, 19 January 2013, 09:37:17 »

Quote from: jdcarpe on Sat, 19 January 2013, 08:26:56

Really like this image from the RedLine site:

Show Image

Wow so beautiful . I hope price about 300$ :(

Acetrak · « **Reply #344 on:** Sat, 19 January 2013, 16:20:00 »

Not sure if everyone visits Team Redline's site often, but today's update further explains the bar feet for LZ-GH and how to adjust the angle height. Pretty nice!

emptythecache · « **Reply #345 on:** Sat, 19 January 2013, 16:37:56 »

IIRC the LZ-S had two different versions of the PCB, one that supported LEDs under every key, and one that only had Caps Lock and Scroll Lock. Do you know which will be included with this?

tsangan · « **Reply #346 on:** Sat, 19 January 2013, 17:28:50 »

Quote from: emptythecache on Sat, 19 January 2013, 16:37:56

IIRC the LZ-S had two different versions of the PCB, one that supported LEDs under every key, and one that only had Caps Lock and Scroll Lock. Do you know which will be included with this?

Only the new PCB has that, it was made not too long ago iirc

TheProfosist · « **Reply #347 on:** Sat, 19 January 2013, 17:56:38 »

I want leds every PLZ!!!

*looks at his KPAD which looks awesome!!!

emptythecache · « **Reply #348 on:** Sat, 19 January 2013, 19:20:25 »

Yeah all over LEDs would be ideal.

DrugER · « **Reply #349 on:** Sat, 19 January 2013, 21:15:11 »

We have many ideas for 'LZ-GH EDITION'

'LZ-GH' own special creative (rotation of the foot, Different angle, etc) will be included.

and down trying to derive a reasonable price.

YOU CAN find the fastest info 4 LZ-GH at 'Red Line website, TEAM.RED-LINE member or Boost '

have a nice weekend.

thx

DrugER

News:

Author Topic: [IC] LZ-GH Keyboard (Read 136557 times)