Author Topic: Phantom PLATES (shipping) (Read 90346 times)

jabar · « **Reply #300 on:** Sun, 31 March 2013, 00:54:59 »

IF WFD or whoever is doing the plate shipping is OK with swapping addresses:

I do not need the ANSI 1.50 plate I ordered—not because of the QC problem above: I now have a 7bit plate. If someone stateside wants to take the plate off my hands at cost, let me know.

Paranoid · « **Reply #301 on:** Sun, 31 March 2013, 05:40:05 »

*message eeeeeeeeerased!*

megaforce · « **Reply #302 on:** Wed, 03 April 2013, 04:04:26 »

Thanks for the updates and your efforts, WFD.

So with this setback, any idea when will the new order of plates will get to you?

WhiteFireDragon · « **Reply #303 on:** Thu, 04 April 2013, 05:50:56 »

A large order for most of the plates were already submitted and paid at the beginning of the week, with ETA in 3 weeks. I'm still waiting for updates on the designs with lower quantity to see if it can go through. Hopefully these lower design quantities will work out.

huttala · « **Reply #304 on:** Thu, 04 April 2013, 11:05:57 »

If there is anyone willing to part with their ISO 150 or 125 plate I'd be happy to take it.
Please send me a PM if you have one and don't need it.

duq · « **Reply #305 on:** Thu, 04 April 2013, 11:44:46 »

Quote from: huttala on Thu, 04 April 2013, 11:05:57

If there is anyone willing to part with their ISO 150 or 125 plate I'd be happy to take it.
Please send me a PM if you have one and don't need it.

PM paranoid. His post is three posts above this.

huttala · « **Reply #306 on:** Thu, 04 April 2013, 12:47:29 »

Quote from: duq on Thu, 04 April 2013, 11:44:46

Quote from: huttala on Thu, 04 April 2013, 11:05:57
If there is anyone willing to part with their ISO 150 or 125 plate I'd be happy to take it.
Please send me a PM if you have one and don't need it.

PM paranoid. His post is three posts above this.

Sure I'll try, but then the person that gets the rest of the stuff will be without a plate, hehe.

aggiejy · « **Reply #307 on:** Wed, 10 April 2013, 18:10:56 »

I don't remember if I ordered a plate or not! :-/ I hope so.

hluo87 · « **Reply #308 on:** Mon, 15 April 2013, 14:46:53 »

any updates about the plates?

WhiteFireDragon · « **Reply #309 on:** Mon, 15 April 2013, 14:54:51 »

Most of them are done and can be picked up late next week. No ETA on the low quantity designs, but they're in progress.

danielucf · « **Reply #310 on:** Mon, 15 April 2013, 16:25:58 »

Late next week like around the 25th-26th? Also any chance there will be an extra ansi 150 plate?

WhiteFireDragon · « **Reply #311 on:** Mon, 15 April 2013, 16:49:22 »

Yeah, I'm scheduled to pick them up at those times. Sorry, no extra plates at all

, I already spent more than I invoiced for so I didn't want to spend more on extras not knowing if they would be needed.

esoomenona · « **Reply #312 on:** Mon, 15 April 2013, 16:52:21 »

You know who has an PHANSI150 plate, daniel. You know very well.

duq · « **Reply #313 on:** Tue, 16 April 2013, 12:47:55 »

Hey WFD, just sent you a PM regards to the plate shipment.

fl0w3n · « **Reply #314 on:** Tue, 16 April 2013, 13:37:21 »

WFD, I notice that you still have me marked as having not paid on the spreadsheet, however my PayPal says I paid your invoice for both plates.

Status: Paid with PayPal on February 28, 2013 at 9:17 AM PST

Glod · « **Reply #315 on:** Tue, 23 April 2013, 10:31:17 »

so if my math is correct, WFD your last ETA would mean they could be ready to ship out as soon as end of this week or beginning of next week. is that correct? (yeah i know you also have the closing of GH60 to deal with

)

hluo87 · « **Reply #316 on:** Fri, 26 April 2013, 14:35:15 »

zzzz, any updates?

Dreamre · « **Reply #317 on:** Fri, 26 April 2013, 14:53:57 »

Will be interested if anyone is selling an extra plate!

VesperSAINT · « **Reply #318 on:** Fri, 26 April 2013, 15:01:28 »

Quote from: Dreamre on Fri, 26 April 2013, 14:53:57

Will be interested if anyone is selling an extra plate!

+1 here too

WhiteFireDragon · « **Reply #319 on:** Fri, 26 April 2013, 18:57:39 »

I just drove 3 hours round trip to pick them up. Quality on these are really nice. Lines are very clean, good tolerances, surface finishes, overall exceeded my expectations. They even individually wrapped them. If I would have known they turned out this good, I would have bought a few extras, but I already spent more than what I invoiced for, so it was not possible to buy extras. Sorry guys, you'll have to source the owner of these plates.

This is only most of them, Beast is having the smaller quantity designs being cut right now, so I have no ETA on those. I'll be shipping these first though.

TheQsanity · « **Reply #320 on:** Fri, 26 April 2013, 19:09:38 »

DamienG · « **Reply #321 on:** Fri, 26 April 2013, 19:28:08 »

Thanks for seeing these through WFD they look awesome, I can't wait.

Are the ISO layouts part of this or are they the small quantity production?

[)amien

r3dx · « **Reply #322 on:** Fri, 26 April 2013, 19:28:32 »

Beautiful.

metalliqaz · « **Reply #323 on:** Fri, 26 April 2013, 19:49:35 »

Those look great! If you post the approx cost difference per plate, that would help us toss you some more funds.
thanks

VesperSAINT · « **Reply #324 on:** Fri, 26 April 2013, 19:49:47 »

If anyone has one they're willing to give up/sell an ansi125, please PM me

I'm wanting to buy/pay immediately

I can't believe I missed this *sigh*

hluo87 · « **Reply #325 on:** Fri, 26 April 2013, 21:19:20 »

thanks so much for your efforts!

just wondering : you will send the plate to bavman?or directly ship to me?

Jupiter · « **Reply #326 on:** Fri, 26 April 2013, 21:23:01 »

They look gooooood!

Quote from: hluo87 on Fri, 26 April 2013, 21:19:20

thanks so much for your efforts!
just wondering : you will send the plate to bavman?or directly ship to me?

Fairly sure he will be sending the plates to Bav. Bav will then combine both into the same shipment to save costs.

The_Beast · « **Reply #327 on:** Fri, 26 April 2013, 22:40:43 »

Quote from: WhiteFireDragon on Fri, 26 April 2013, 18:57:39

This is only most of them, Beast is having the smaller quantity designs being cut right now, so I have no ETA on those. I'll be shipping these first though.

I'll email my guy and see where he's at in terms of production.

Glod · « **Reply #328 on:** Fri, 26 April 2013, 22:44:28 »

would the WFD125 be considered one of the smaller quantity?

The_Beast · « **Reply #329 on:** Fri, 26 April 2013, 22:45:49 »

Quote from: Glod on Fri, 26 April 2013, 22:44:28

would the WFD125 be considered one of the smaller quantity?

yes

Glod · « **Reply #330 on:** Fri, 26 April 2013, 22:51:13 »

well then i put my trust in you sir, email away

phetto · « **Reply #331 on:** Sat, 27 April 2013, 08:37:55 »

anyone with a spare 1.5 iso plate or wanna trade for a ansi 1.5 plate?

Mugen · « **Reply #332 on:** Sun, 28 April 2013, 11:44:05 »

If anyone is looking to selll a ANS125, PM me.
Thanks.

samwisekoi · « **Reply #333 on:** Sun, 28 April 2013, 13:50:28 »

Plates? Awesome!

Where are we on PCBs?

- Ron | samwisekoi

metalliqaz · « **Reply #334 on:** Mon, 29 April 2013, 14:49:35 »

Quote from: samwisekoi on Sun, 28 April 2013, 13:50:28

Plates? Awesome!

Where are we on PCBs?

PCBs came in a while ago, we should be seeing both ship out this week I think.

WhiteFireDragon · « **Reply #335 on:** Mon, 29 April 2013, 16:51:48 »

Yeah sometimes this week for most of them. But I need to straighten out which plates go where, and it's a mess right now. People have been selling orders and it no longer goes to original owner. Then I have to figure out which ones stay with me, goes to bavman, ship directly to buyers, or whether to send any to profosist or not. I cannot contact that guy to confirm anything or get payment he's owed me for a while now.

metalliqaz · « **Reply #336 on:** Mon, 29 April 2013, 18:00:45 »

I'll make it easy on ya... My original order goes directly to me so you can send it now

You're welcome.

)

samwisekoi · « **Reply #337 on:** Mon, 29 April 2013, 20:34:10 »

Quote from: metalliqaz on Mon, 29 April 2013, 18:00:45

I'll make it easy on ya... My original order goes directly to me so you can send it now You're welcome. )

Me too!

The_Beast · « **Reply #338 on:** Tue, 30 April 2013, 10:38:57 »

Plates would have been done yesterday, but they lost power for some reason. They should be done today and on their way to WFD soon

BimboBB · « **Reply #339 on:** Tue, 30 April 2013, 13:08:38 »

thanks for the update beast!

lets hope profosist get sorted his stuff soon as well and we might have an happy end.

TheQsanity · « **Reply #340 on:** Tue, 30 April 2013, 18:45:50 »

Hey Beast, you got the PRF plates too?

The_Beast · « **Reply #341 on:** Tue, 30 April 2013, 19:25:07 »

HHK150 (4)
ISO125 (10)
ISO150 (15)
PRF125 (9)
RDB150 (2)
WFD125 (14)

This is the order WFD needed and I ordered

sleepy916 · « **Reply #342 on:** Sat, 04 May 2013, 03:44:30 »

I'm lookling to trade my ANSI 125 for an ANSI 150 or just buy an ANSI 150 if someone has one available. Please pm me if you do.

Rendom · « **Reply #343 on:** Mon, 06 May 2013, 14:39:22 »

Looking to buy 1 ANSI125 plate. Please PM me if you have one, thanks!

megaforce · « **Reply #344 on:** Mon, 06 May 2013, 15:57:28 »

How are we looking with the re-ordered plates?

The_Beast · « **Reply #345 on:** Tue, 07 May 2013, 12:03:40 »

Plates should be dropped off tonight and shipped to WFD relatively soon (should be no later than Friday)

duq · « **Reply #346 on:** Tue, 07 May 2013, 13:12:55 »

For those that got their PCB already but were supposed to have the plate/pcb shipped together, are we going to get them directly? Or are they going to goto Bav and then go out?

megaforce · « **Reply #347 on:** Tue, 07 May 2013, 19:19:54 »

Quote from: The_Beast on Tue, 07 May 2013, 12:03:40

Plates should be dropped off tonight and shipped to WFD relatively soon (should be no later than Friday)

Thanks!

Rendom · « **Reply #348 on:** Thu, 09 May 2013, 10:43:34 »

Still looking for a ansi125 plate, please let me know. : (

inteli722 · « **Reply #349 on:** Thu, 09 May 2013, 15:17:24 »

Quote from: Rendom on Thu, 09 May 2013, 10:43:34

Still looking for a ansi125 plate, please let me know. : (

You really should be looking for a ANSI150 plate...What's the point of getting a Phantom if you're going to use a layout you can get on any commercially available keyboard???

I kid, but seriously. You need an ANSI150 plate.

News:

Author Topic: Phantom PLATES (shipping) (Read 90346 times)