Author Topic: Tai Hao 6.25x Space Bar GB [SHIPPED] (Read 118484 times)

rowdy · « **Reply #150 on:** Thu, 12 September 2013, 22:48:44 »

Need LOTS moar orders!

Especially yellow, which has only just scraped ahead of green, not that it is a race or anything.

If the situation does not change, looks like KeyPop's polycarb space bars will be a big hit!

elton5354 · « **Reply #151 on:** Fri, 13 September 2013, 18:22:21 »

Not a single order today?! Let's get the orders rolling in now!

rowdy · « **Reply #152 on:** Fri, 13 September 2013, 18:54:07 »

That's sad

Maybe someone should design a sig banner to get the message out?

Disclaimer: I have sigs disabled so this might already be happening.

grandtheftspaceman · « **Reply #153 on:** Fri, 13 September 2013, 19:13:06 »

I just put in an order for 2 reds and 4 blacks. I'm pretty glad they're the universal type, my FC200R thanks you

)

terran5992 · « **Reply #154 on:** Sat, 14 September 2013, 04:35:16 »

Hey Elton,

Can shadowved handle the orders for singapore? That might bring down the international shipping

I wouldn't mind helping out if he's busy

elton5354 · « **Reply #155 on:** Sat, 14 September 2013, 08:30:00 »

Quote from: terran5992 on Sat, 14 September 2013, 04:35:16

Hey Elton,

Can shadowved handle the orders for singapore? That might bring down the international shipping

I wouldn't mind helping out if he's busy

Definitely, but is he willing to? Have you spoke to him about it?

terran5992 · « **Reply #156 on:** Sat, 14 September 2013, 11:04:40 »

Sure I'll drop him a pm

terran5992 · « **Reply #157 on:** Sat, 14 September 2013, 11:07:18 »

My bad it was actually tataki who is in charge of passing the sets in singapore

Stevo32792 · « **Reply #158 on:** Sun, 15 September 2013, 01:07:45 »

You can try posting over at /r/mechanicalkeyboards about this. I posted over there for the full 104 buy and I think a number of them placed orders (don't forget the community is pretty large at 15000 subs). Just a heads up to not leave them out. If you want me to do the post, let me know.

terran5992 · « **Reply #159 on:** Sun, 15 September 2013, 08:24:28 »

Added in my order

elton5354 · « **Reply #160 on:** Sun, 15 September 2013, 08:51:54 »

Quote from: Stevo32792 on Sun, 15 September 2013, 01:07:45

You can try posting over at /r/mechanicalkeyboards about this. I posted over there for the full 104 buy and I think a number of them placed orders (don't forget the community is pretty large at 15000 subs). Just a heads up to not leave them out. If you want me to do the post, let me know.

Okay, will do.

Stevo32792 · « **Reply #161 on:** Sun, 15 September 2013, 11:17:36 »

Quote from: elton5354 on Sun, 15 September 2013, 08:51:54

Quote from: Stevo32792 on Sun, 15 September 2013, 01:07:45
You can try posting over at /r/mechanicalkeyboards about this. I posted over there for the full 104 buy and I think a number of them placed orders (don't forget the community is pretty large at 15000 subs). Just a heads up to not leave them out. If you want me to do the post, let me know.

Okay, will do.

BTW, I wouldn't be surprised if the post gets removed if you link directly here or if you make a text post and type geekhack without calling it geekwhack. I think my first post I made was deleted because I linked directly here, but the reminder post wasn't removed.

elton5354 · « **Reply #162 on:** Sun, 15 September 2013, 11:22:16 »

Quote from: Stevo32792 on Sun, 15 September 2013, 11:17:36

BTW, I wouldn't be surprised if the post gets removed if you link directly here or if you make a text post and type geekhack without calling it geekwhack. I think my first post I made was deleted because I linked directly here, but the reminder post wasn't removed.

I hope this is fine...lol

http://www.reddit.com/r/MechanicalKeyboards/comments/1mfsnf/tai_hao_625x_spacebars_now_available_through/

Stevo32792 · « **Reply #163 on:** Sun, 15 September 2013, 11:33:16 »

Quote from: elton5354 on Sun, 15 September 2013, 11:22:16

I hope this is fine...lol

http://www.reddit.com/r/MechanicalKeyboards/comments/1mfsnf/tai_hao_625x_spacebars_now_available_through/

I guess it's just a test of their patience... or something, haha.

KeyPop · « **Reply #164 on:** Sun, 15 September 2013, 22:27:08 »

We've submitted our order.

elton5354 · « **Reply #165 on:** Sun, 15 September 2013, 23:29:57 »

We still have about half way to go~

bazemk1979 · « **Reply #166 on:** Tue, 17 September 2013, 12:38:21 »

Thanks Keypop, if things get tight towards the end I'll be adding one of each color extra to my order

meeekus · « **Reply #167 on:** Tue, 17 September 2013, 13:17:15 »

Is it possible to lower MOQ with a price hike? I know it would require a new form for everyone to re-commit but I am just shooting out ideas here.

I don't want this to cancel.

bazemk1979 · « **Reply #168 on:** Tue, 17 September 2013, 17:00:38 »

Quote from: meeekus on Tue, 17 September 2013, 13:17:15

Is it possible to lower MOQ with a price hike? I know it would require a new form for everyone to re-commit but I am just shooting out ideas here.

I don't want this to cancel.

after the first gb it went trough, doubt this one will fail, tai hao wants our business for future too. if needed be for prices to go lil higher if we are below moq im fine with it. things can be worked out, they want to work with us.

rowdy · « **Reply #169 on:** Tue, 17 September 2013, 17:29:30 »

Quote from: bazemk1979 on Tue, 17 September 2013, 17:00:38

Quote from: meeekus on Tue, 17 September 2013, 13:17:15
Is it possible to lower MOQ with a price hike? I know it would require a new form for everyone to re-commit but I am just shooting out ideas here.

I don't want this to cancel.

after the first gb it went trough, doubt this one will fail, tai hao wants our business for future too. if needed be for prices to go lil higher if we are below moq im fine with it. things can be worked out, they want to work with us.

Unless they produce something different, I don't think there will be a repeat GB for a long time.

Apart from the multiple sets that various individuals have bought (including me), a vendor or two have bought lots too, so these will be available from various GH sources for a while.

bazemk1979 · « **Reply #170 on:** Tue, 17 September 2013, 19:23:02 »

Quote from: rowdy on Tue, 17 September 2013, 17:29:30

Quote from: bazemk1979 on Tue, 17 September 2013, 17:00:38
Quote from: meeekus on Tue, 17 September 2013, 13:17:15
Is it possible to lower MOQ with a price hike? I know it would require a new form for everyone to re-commit but I am just shooting out ideas here.

I don't want this to cancel.

after the first gb it went trough, doubt this one will fail, tai hao wants our business for future too. if needed be for prices to go lil higher if we are below moq im fine with it. things can be worked out, they want to work with us.

Unless they produce something different, I don't think there will be a repeat GB for a long time.

Apart from the multiple sets that various individuals have bought (including me), a vendor or two have bought lots too, so these will be available from various GH sources for a while.

Elton can later down the road ask about possibility for different color sets besides this GB + the off center stemmed capslock stepped capslock can be added along with the 6.25 uni space bar. There can be other colors such as: orange, purple,brown, grey etc etc etc....

rowdy · « **Reply #171 on:** Tue, 17 September 2013, 20:08:38 »

Quote from: bazemk1979 on Tue, 17 September 2013, 19:23:02

Quote from: rowdy on Tue, 17 September 2013, 17:29:30
Quote from: bazemk1979 on Tue, 17 September 2013, 17:00:38
Quote from: meeekus on Tue, 17 September 2013, 13:17:15
Is it possible to lower MOQ with a price hike? I know it would require a new form for everyone to re-commit but I am just shooting out ideas here.

I don't want this to cancel.

after the first gb it went trough, doubt this one will fail, tai hao wants our business for future too. if needed be for prices to go lil higher if we are below moq im fine with it. things can be worked out, they want to work with us.

Unless they produce something different, I don't think there will be a repeat GB for a long time.

Apart from the multiple sets that various individuals have bought (including me), a vendor or two have bought lots too, so these will be available from various GH sources for a while.

Elton can later down the road ask about possibility for different color sets besides this GB + the off center stemmed capslock stepped capslock can be added along with the 6.25 uni space bar. There can be other colors such as: orange, purple,brown, grey etc etc etc....

Orange would be nice. Also blue on white.

SoUL · « **Reply #172 on:** Wed, 18 September 2013, 19:30:47 »

Ordered a few!

rowdy · « **Reply #173 on:** Wed, 18 September 2013, 19:51:43 »

Thanks for your support

The OP numbers have not been updated for a little while - all colours are still hoving around 50% MOQ.

terran5992 · « **Reply #174 on:** Wed, 18 September 2013, 20:10:53 »

No reply from tataki yet .

Hyde · « **Reply #175 on:** Wed, 18 September 2013, 20:48:42 »

lol I just saw the amount keypop ordered. Man huge thanks to keypop !!!

Now that I think about it, I suspect after the keycap set gets released then there will probably be a swarm of people that want spacebars. >____>

rowdy · « **Reply #176 on:** Wed, 18 September 2013, 20:51:06 »

Quote from: Hyde on Wed, 18 September 2013, 20:48:42

lol I just saw the amount keypop ordered. Man huge thanks to keypop !!!

Now that I think about it, I suspect after the keycap set gets released then there will probably be a swarm of people that want spacebars. >____>

And hopefully they will visit this little thread.

Although everyone in the original Tai Hao GB should have received an email pointing them to this thread. I did.

bazemk1979 · « **Reply #177 on:** Wed, 18 September 2013, 22:47:17 »

If numbers are not met I'm going to double the order, aka 2 of each color space bars instead of 1, but wont do that till there is a final closing date.

bazemk1979 · « **Reply #178 on:** Thu, 19 September 2013, 14:12:33 »

Some people might not like this but I'm just going to copy/paste what I wrote Elton. I just never understood people that are aware of GB that's going on and then when the GB is closed they come in a week later complaining that they thought that they had more time to play around, or they forgot, or they got too busy ( sure not having 5 minutes to open GH, click on the forum form and fill it up?)

Full sets are in production, numbers we reached with full sets were crazy, the only reason we never reached those numbers faster is because people were insecure because there was no 6.25 space bar in it. WTF is going on now?!?!?! We don't have just 6.25 space bar, we have a universal one that will fit any board that uses 6.25 including the wako Leopold one.... This is pure laziness guys, so this is what I suggested to Elton, its up to him what he wants to do.

GB MOQ
« Sent to: elton5354 on: Thu, 19 September 2013, 14:02:20 » Reply Quote Delete: Elton can you ask Tai Hao rep if they are flexible to work with us if we don't reach the 400 MOQ? maeby they can bump up the price, maeby you can tell them that we are numers met from 200-250 trough out all 5 sets, if we get a positive answer and price bump is not too hefty dude, at least you can give another week for closing date on the GB and that's it. You already sent all those emails letting peeps know that there is a GB for uni spacebars, what I noticed that people like to do is come week or 2 after the GB is closed and complain that they thought that the GB was gonna be open for around a month.....

Do not forget, tooling takes a month, then another month for production, then mailing to you maeby 10 days until u receive them, then you mail them and that takes time too maeby for some peeps up to 2 weeks until they receive them....... that's 3 months after closing the GB, my opinion is ask Taio Hao so we can have a soon closing date and do not depend on those peeps that they like to drag their asses and come at the last minute thinking that the GB will be still waiting on them.

RickyJ · « **Reply #179 on:** Sun, 22 September 2013, 13:17:05 »

Ordered one for each of my sets!

Galaxy · « **Reply #180 on:** Mon, 23 September 2013, 19:06:49 »

In the spirit of helping this get to its MOQ I'd like to double my order.

rowdy · « **Reply #181 on:** Mon, 23 September 2013, 19:11:06 »

Quote from: Galaxy on Mon, 23 September 2013, 19:06:49

In the spirit of helping this get to it's MOQ I'd like to double my order.

Good man Hope there's some yellow in there

Galaxy · « **Reply #182 on:** Mon, 23 September 2013, 19:34:53 »

Quote from: rowdy on Mon, 23 September 2013, 19:11:06

Quote from: Galaxy on Mon, 23 September 2013, 19:06:49
In the spirit of helping this get to it's MOQ I'd like to double my order.

Good man Hope there's some yellow in there

One of each (well now 2 of each), just got yellow halfway to its MOQ.

elton5354 · « **Reply #183 on:** Wed, 25 September 2013, 09:29:11 »

Okay, I'm going to close the order form on Oct 6 and start invoicing.

The MOQ does not need to be 2000 anymore. The quantity is fine right now for them. I've already sent them a space bar and they'll send me a mock up sample when they are done.

cyberwave · « **Reply #184 on:** Wed, 25 September 2013, 09:36:54 »

Quote from: elton5354 on Wed, 25 September 2013, 09:29:11

Okay, I'm going to close the order form on Oct 6 and start invoicing.

The MOQ does not need to be 2000 anymore. The quantity is fine right now for them. I've already sent them a space bar and they'll send me a mock up sample when they are done.

goodguy TaiHao!

Artichoke · « **Reply #185 on:** Wed, 25 September 2013, 09:37:29 »

That's great news. Will this affect the timeline you outlined much? I would imagine the production time would be slightly less, but it seems like if it's only 1,300 spacebars, other faster methods of shipping might be plausible.

saturnotaku · « **Reply #186 on:** Wed, 25 September 2013, 09:40:05 »

In for one red and one black.

rowdy · « **Reply #187 on:** Wed, 25 September 2013, 15:11:06 »

Fantastic! Thanks for the update

bazemk1979 · « **Reply #188 on:** Wed, 25 September 2013, 16:31:17 »

great news Elton!!!

do_Og@n · « **Reply #189 on:** Wed, 25 September 2013, 17:20:49 »

Phew!!! Seems like Tai Hao is a smart business.

MOZ · « **Reply #190 on:** Wed, 25 September 2013, 19:19:54 »

Order Placed!

Hyde · « **Reply #191 on:** Thu, 26 September 2013, 10:30:38 »

Sweet !!! Things are all coming together good job Elton !!!

bakteria · « **Reply #192 on:** Fri, 27 September 2013, 10:33:59 »

order up!

meeekus · « **Reply #193 on:** Fri, 27 September 2013, 12:11:30 »

That is great news elton. TaiHai seems to be warming up to these low orders (enthusiast group buys).

rowdy · « **Reply #194 on:** Fri, 27 September 2013, 18:36:35 »

Quote from: meeekus on Fri, 27 September 2013, 12:11:30

That is great news elton. TaiHai seems to be warming up to these low orders (enthusiast group buys).

Let's hope so

They might not be another SP (who go out of their way to cater for GH's small and random orders), but if they will at least drop MOQ or consider different colours or new keycaps, at this price I suspect there might be a GB every year or so, so that all the new members can grab a couple of sets of cheap DS sets.

swill · « **Reply #195 on:** Fri, 27 September 2013, 19:21:00 »

Im excited about this...

Thank you to everyone has has put hard work into this.

LechnerDE · « **Reply #196 on:** Sat, 28 September 2013, 14:05:59 »

Quote from: elton5354 on Wed, 25 September 2013, 09:29:11

Okay, I'm going to close the order form on Oct 6 and start invoicing.

The MOQ does not need to be 2000 anymore. The quantity is fine right now for them. I've already sent them a space bar and they'll send me a mock up sample when they are done.

That's awesome news!

I wish GMK would be that cooperative

elton5354 · « **Reply #197 on:** Sun, 29 September 2013, 22:02:35 »

I've added the shipping cost to the spreadsheet, but I'm not 100% sure how many space bars is the limit to ship with the cheapest option. It probably has to be flat with a single file of space bars. As for Canadian shipping, it was estimated to be more than US/International shipping with the same specs for some reason (US/Int: $8.50 inc. materials, Cdn: $10.XX for shipping alone). So I'll have to stop by the post office to double check the shipping cost in person.

rowdy · « **Reply #198 on:** Sun, 29 September 2013, 22:52:09 »

Looks good to me

Thanks Elton!

LechnerDE · « **Reply #199 on:** Mon, 30 September 2013, 06:24:14 »

Quote from: elton5354 on Sun, 29 September 2013, 22:02:35

I've added the shipping cost to the spreadsheet, but I'm not 100% sure how many space bars is the limit to ship with the cheapest option. It probably has to be flat with a single file of space bars. As for Canadian shipping, it was estimated to be more than US/International shipping with the same specs for some reason (US/Int: $8.50 inc. materials, Cdn: $10.XX for shipping alone). So I'll have to stop by the post office to double check the shipping cost in person.

Regarding Shipping:

I hope it's possible to ship the spacebars along with our original Tai Hao order. Or do you want to separate those two GBs?

I'd prefer one shipment for everything I ordered from you. I know I'll have to wait longer to get both, but I wouldn't use the sets without the spacebars anyway

News:

Author Topic: Tai Hao 6.25x Space Bar GB [SHIPPED] (Read 118484 times)