Author Topic: TEENSY 2.0 GROUP BUY ROUND 2 (Read 30616 times)

Pacifist · « **Reply #100 on:** Sat, 01 March 2014, 17:29:36 »

Quote from: jdcarpe on Sat, 01 March 2014, 08:38:17

Quote from: Pacifist on Sat, 01 March 2014, 01:02:11
Any ETA? Its been a week

The Teensys are en route to me, and will arrive Monday evening. I'll be honest, I won't have much time before next weekend to get things packed up and sent. I'll try, but I make no promises.

Sounds good. I'm still cleaning my F XT so I'm not in a hurry

Photoelectric · « **Reply #101 on:** Sat, 01 March 2014, 19:43:04 »

No rush for me either, JD! You can drop mine off last.

mkawa · « **Reply #102 on:** Sat, 01 March 2014, 20:05:29 »

i am not in any hurry

jdcarpe · « **Reply #103 on:** Sat, 01 March 2014, 20:21:02 »

It's no real problem. Packing and shipping only takes a couple hours, really. It's just a matter of finding those couple hours during the week that becomes a challenge. That's why I tend to do most of my packing for GBs on weekends.

damorgue · « **Reply #104 on:** Sun, 02 March 2014, 10:46:10 »

Anyone know of a cheap way to power a teensy without a computer? I seem to be using them everywhere in more or less permanent installations.

I have been using power plugs meant for charging USB devices and a USB cable until now. It is basically a wall plug with a USB connector on it (pretty much a small sized 230VAC-5VDC transformer I guess). I think we need a list of sources for the cheapest power plug USB chargers.

mkawa · « **Reply #105 on:** Sun, 02 March 2014, 11:30:42 »

take any 5v power rail, hook the ground up to ground on a USB mini connector, and the 5V to the 5V pin and the teensy will power up when you plug in the mini USB. the teensy only asks for 500ma, so as long as your power supply can give it that, you're good. in the US, the cheapest reliable USB wall warts are probably monoprice's. otherwise, i'd say buy like 5 off of ebay from an HK seller with high feedback, test them all and just toss the ones that don't work.

jdcarpe · « **Reply #106 on:** Wed, 05 March 2014, 15:29:57 »

QUICK UPDATE:

Teensys arrived Monday, as scheduled. All European orders going via proxy (Muirium) have been shipped as of today. Also shipped the large order to Josh@MechanicalKeyboards today. Will work on getting the rest packed and labeled this weekend, to go out in Monday's mail.

Pacifist · « **Reply #107 on:** Wed, 05 March 2014, 17:05:45 »

Quote from: jdcarpe on Wed, 05 March 2014, 15:29:57

QUICK UPDATE:

Teensys arrived Monday, as scheduled. All European orders going via proxy (Muirium) have been shipped as of today. Also shipped the large order to Josh@MechanicalKeyboards today. Will work on getting the rest packed and labeled this weekend, to go out in Monday's mail.

YAY!!!

n0rvig · « **Reply #108 on:** Wed, 05 March 2014, 21:54:52 »

w00t! thanks for the update

hydrospell · « **Reply #109 on:** Wed, 05 March 2014, 23:33:24 »

curious - how many of the teensys are going to (southeast) asia?

stoic-lemon · « **Reply #110 on:** Thu, 06 March 2014, 03:00:04 »

I don't think SE Asia covers me, but I'm getting some.

JoshMK · « **Reply #111 on:** Fri, 07 March 2014, 10:53:58 »

Quote from: jdcarpe on Wed, 05 March 2014, 15:29:57

Also shipped the large order to Josh@MechanicalKeyboards today.

Got them in today. Thanks JD!

Pacifist · « **Reply #112 on:** Mon, 10 March 2014, 16:26:01 »

Can't wait

jdcarpe · « **Reply #113 on:** Wed, 12 March 2014, 13:54:16 »

I forgot to tell you guys.

THESE ARE 100% SHIPPED.

I shipped out all CONUS orders on Monday the 10th, and I shipped all non-proxy international orders yesterday. Some people should be getting these very soon!

Photoelectric · « **Reply #114 on:** Wed, 12 March 2014, 14:49:33 »

Just received my Teensy--thank you JD!! It really is tiny: I was surprised just how small it actually is

Pacifist · « **Reply #115 on:** Wed, 12 March 2014, 15:06:21 »

Quote from: jdcarpe on Wed, 12 March 2014, 13:54:16

I forgot to tell you guys.

THESE ARE 100% SHIPPED.

I shipped out all CONUS orders on Monday the 10th, and I shipped all non-proxy international orders yesterday. Some people should be getting these very soon!

Ooooh can't wait

tgujay · « **Reply #116 on:** Wed, 12 March 2014, 16:22:24 »

Came home to a surprise in the mailbox... my two Teensy 2.0's! Thanks JD!

r3dx · « **Reply #117 on:** Wed, 12 March 2014, 22:29:16 »

Received mine today as well! Thanks JD!

thecableguy · « **Reply #118 on:** Wed, 12 March 2014, 22:35:38 »

Mine arrived today, too. Thank you, JD!

Pacifist · « **Reply #119 on:** Wed, 12 March 2014, 22:37:31 »

Quote from: Pacifist on Wed, 12 March 2014, 15:06:21

Quote from: jdcarpe on Wed, 12 March 2014, 13:54:16
I forgot to tell you guys.

THESE ARE 100% SHIPPED.

I shipped out all CONUS orders on Monday the 10th, and I shipped all non-proxy international orders yesterday. Some people should be getting these very soon!

Ooooh can't wait

Got em!

remdell · « **Reply #120 on:** Wed, 12 March 2014, 23:15:01 »

I got my pair today. However, it will be quite some time before I use it. Hopefully, after my midterms are over with, I can get some soldering equipment to tinker with the Teensy.

AKmalamute · « **Reply #121 on:** Thu, 13 March 2014, 01:53:52 »

Quote from: remdell on Wed, 12 March 2014, 23:15:01

it will be quite some time before I use it.

I, however, have already melted one of mine.

Fortunately that surface mount thing that's next to the mid-pin the ergodox relies on is either a resistor, or I got incredibly lucky reattaching it in the correct direction. I've since that heart stopping moment, programmed the teensy repeatedly and it seems to work as I'd expect.

Hopefully my coworkers will have better luck with this thing on their projects. Or at least not worse.

tgujay · « **Reply #122 on:** Thu, 13 March 2014, 10:15:06 »

Quote from: AKmalamute on Thu, 13 March 2014, 01:53:52

Quote from: remdell on Wed, 12 March 2014, 23:15:01
it will be quite some time before I use it.
I, however, have already melted one of mine.

Fortunately that surface mount thing that's next to the mid-pin the ergodox relies on is either a resistor, or I got incredibly lucky reattaching it in the correct direction. I've since that heart stopping moment, programmed the teensy repeatedly and it seems to work as I'd expect.

Hopefully my coworkers will have better luck with this thing on their projects. Or at least not worse.

Yeah, despite my best efforts I'm starting to think I'm not cut out for soldering haha. Getting the pins on my Teensy was a pain in the ass.

n7 · « **Reply #123 on:** Thu, 13 March 2014, 18:59:38 »

Got mine yesterday. Have some ideas for some projects I want to use it for, but nothing concrete yet. Thanks again for organizing the buy!

shrapneL · « **Reply #124 on:** Thu, 13 March 2014, 19:10:48 »

I got mine yesterday! Thanks JD

tricheboars · « **Reply #125 on:** Thu, 13 March 2014, 19:33:22 »

i got mine yesterday. when i saw who it was from i got super excited. it is funny this group buy. i bought into uh.. 5 group buys before this one and i got yours before all of the others. really appreciate it.

maybe i will make an orb weaver like thingy since my nostromo is ****ing membrane. yuk.

i dislike the censor on this site for the record.

PhineasRex · « **Reply #126 on:** Thu, 13 March 2014, 20:34:41 »

I just got my Teensies. Thanks, JdCarpe!

tgujay · « **Reply #127 on:** Fri, 14 March 2014, 07:35:08 »

Quote from: tricheboars on Thu, 13 March 2014, 19:33:22

i got mine yesterday. when i saw who it was from i got super excited. it is funny this group buy. i bought into uh.. 5 group buys before this one and i got yours before all of the others. really appreciate it.

maybe i will make an orb weaver like thingy since my nostromo is ****ing membrane. yuk.

i dislike the censor on this site for the record.

That's an individual profile setting...

CPTBadAss · « **Reply #128 on:** Sun, 16 March 2014, 15:26:54 »

Just wanted to say I got my Teensys when I returned. As always, you run a hell of a GB jdcarpe. Thanks again

nubbinator · « **Reply #129 on:** Sun, 16 March 2014, 15:38:12 »

Got mine yesterday. It really is teensy.

Proc31 · « **Reply #130 on:** Sun, 16 March 2014, 16:14:45 »

Got mine yesterday, thanks everyone!

doub · « **Reply #131 on:** Mon, 17 March 2014, 19:59:46 »

I got mine today. Thanks for the group buy and the proxying.

LechnerDE · « **Reply #132 on:** Thu, 20 March 2014, 11:50:15 »

Got my 2 Teensies today

Thanks for organizing the group buy JD!

MythicalWagyu · « **Reply #133 on:** Thu, 20 March 2014, 12:22:14 »

Forgot to mention mine showed up over the weekend - thanks for arranging the group buy JD! I shall now go meticulously study Lowpoly's amazin Apple M0110 mod in hopes of eventually refurbing my board

stoic-lemon · « **Reply #134 on:** Sat, 22 March 2014, 09:03:24 »

Mine arrived safe and sound today. Thanks JD.

hydrospell · « **Reply #135 on:** Sat, 22 March 2014, 22:05:05 »

Hey jd, I know Singapore's probably going to take long to ship to but would like to confirm that my order is on its way. thanks!

jdcarpe · « **Reply #136 on:** Sat, 22 March 2014, 23:40:57 »

Quote from: hydrospell on Sat, 22 March 2014, 22:05:05

Hey jd, I know Singapore's probably going to take long to ship to but would like to confirm that my order is on its way. thanks!

It says "Customs Clearance Process Complete - Singapore" on USPS tracking. I'll send you a PM with the tracking number.

stoic-lemon · « **Reply #137 on:** Sat, 22 March 2014, 23:44:35 »

Quote from: hydrospell on Sat, 22 March 2014, 22:05:05

Hey jd, I know Singapore's probably going to take long to ship to but would like to confirm that my order is on its way. thanks!

Not to worry. yours can't be far behind mine.

n0rvig · « **Reply #138 on:** Sat, 22 March 2014, 23:58:44 »

Happy happy. Thanks JD.

hydrospell · « **Reply #139 on:** Sun, 23 March 2014, 09:59:40 »

Thanks jd and lemon

jdcarpe · « **Reply #140 on:** Sun, 23 March 2014, 17:52:54 »

jorgenslee, I just got a tracking update for your package, and they just processed though customs in Chicago! They were sent on the same day as the other 8 international packages I sent, so I don't know if USPS lost them in their system for 2 weeks or what. But know that your Teensys are on their way, and I apologize on behalf of USPS for them taking so long to get there.

jorgenslee · « **Reply #141 on:** Sun, 23 March 2014, 19:07:26 »

Cool, no worries jdcarpe. It is so nice of you to update us the statuses of the tracking. I am in no hurry so that is fine. Thanks for this GB.

hydrospell · « **Reply #142 on:** Mon, 24 March 2014, 21:47:31 »

Mr Carpexxxxxxxx the teensy has arrived here in Singapore. Thanks again!

ZeDestructor · « **Reply #143 on:** Thu, 27 March 2014, 04:48:05 »

Arrived in Australia a few days ago. Thanks for the effort!

phoenix1234 · « **Reply #144 on:** Fri, 28 March 2014, 20:52:15 »

Received mine today, everything is perfect, thanks JD.

jorgenslee · « **Reply #145 on:** Tue, 08 April 2014, 00:34:30 »

Got the 2 teensy's today. Thanks jdcarpe.

Zentaaa · « **Reply #146 on:** Sat, 28 June 2014, 06:34:10 »

If anyone has a spare, I am in need of one

Thanks

feizor · « **Reply #147 on:** Sat, 28 June 2014, 08:49:50 »

Yep I need one too for the phantom.

Zentaaa · « **Reply #148 on:** Sat, 28 June 2014, 13:57:27 »

Quote from: feizor on Sat, 28 June 2014, 08:49:50

Yep I need one too for the phantom.

Okay just found out that MechanicalKeyboards.com just got a restock so head over to here for one man!

http://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=568

feizor · « **Reply #149 on:** Sun, 29 June 2014, 09:18:43 »

Awesome, thanks for the heads up!

News:

Author Topic: TEENSY 2.0 GROUP BUY ROUND 2 (Read 30616 times)