[SPRiT] MX ALPS Springs/ LSS Lube/ Stabilizers/ Cherry RGB Clear (CLOSED!!!!!!!)

[sprit]

Hi Sprit, move all my 100-120g orders to #Gold to push MOQ, I recommend offering the same to any others ordering that weight so we have a chance of getting my our springs.
Also if you could please recount my order to me, I might increase it to help my darling springs.

edit: Nevermind, Zeal did it for me.

OK!  I got it !   

[malu1989]

Hi Sprit, please change my order to 2 sets 68g and 2 sets 78g. Would love to see those 78g s.
When the 78g don't reach MOQ i would be interested in 2 sets 75g golden sample springs you mentioned.

[Defect]

Hey Sprit, just want to confirm you're still holding a set of 68g gold springs for me to ship with your PCB GB.

[xSpartanCx]

Am I supposed to receive some sort of confirmation that my order went through?

[Zeal]

Am I supposed to receive some sort of confirmation that my order went through?

No. As long as you see the order form received page after submitting, you should be golden.

[cpt_lucid]

I'm a little worried that some of the stiffer springs won't make MOQ. I put in an order for my preferred 85g springs, but if this does not make, could I simply specify that I want the closest springs to that available?

[cooldiscretion]

FYI, I just modified my order to 4 of the standard 62g springs.

[exitfire401]

Just put an order in so I can do another board with ergo clears!

[Puddsy]

Please change my order to just 2 sets of (gold) 62g springs.

Thank you!

[user 18]

I can't afford to buy in this time, but are there any plans for future rounds?

[quochung1989]

sprit, plz check pm

[sprit]

Hi!  Guys! 
Your questions answered and PMed.
I will post the MOQ status and start invoicing Tomorrow! 

[phoenix1234]

Hi!  Guys! 
Your questions answered and PMed.
I will post the MOQ status and start invoicing Tomorrow! 

Hi sprit,
If you don't mind, please post the MOQ status first so all of us can adjust the order immediately.
I'm pretty sure a lot of people will shift from the non-MOQ to the one has MOQ.
For my case, if 78g light and 100g  don't meet the MOQ, I will shift them equally to 62g and 68g.

[sprit]

OK!   I will post the MOQ Status in a couple of hrs.

[strict]

Hi!  Guys! 
Your questions answered and PMed.
I will post the MOQ status and start invoicing Tomorrow! 

Hi sprit,
If you don't mind, please post the MOQ status first so all of us can adjust the order immediately.
I'm pretty sure a lot of people will shift from the non-MOQ to the one has MOQ.
For my case, if 78g light and 100g  don't meet the MOQ, I will shift them equally to 62g and 68g.

I'll be really sad if the 78g springs don't make MOQ. I was really looking forward to trying those. 

[phoenix1234]

OK!   I will post the MOQ Status in a couple of hrs.

Great! Thanks, sprit. I will update my order accordingly.

[sprit]

MOQ Status  -  Juli 14th   (Start Invoicing) 

* MOQ = 100 sets each for Standard version  (and then, MOQ = 50 sets for 18K gold-plating) 

60g, 62g, 65g, 68g   :  Hit MOQ  :  All OK! for Normal Standard & 18K Gold version.   
78g   :   (around  55 sets till now)   -  I will cover the MOQ and produce the Normal Standard version only.   
50g, 55g   (18K Gold v1.1  high-glossy) ,     70g, 75g, 85g   (18K Gold v1.0  medium-glossy)  : Only the Gold versions are available for R2.

*Below MOQ  :  100g,  120g    (around 30sets each, till now)  : I will wait, and wish these hit the MOQ.

[xSpartanCx]

Can you check my order? I may have chosen 55g, I forget, but if it's not 60g can I change my order to that since the 55g normal didn't reach MOQ?

[cpt_lucid]

Sprit, I believe I ordered 85g standard.  Since this hasn't made, can I change it to the 78g standard?

[sprit]

Can you check my order? I may have chosen 55g, I forget, but if it's not 60g can I change my order to that since the 55g normal didn't reach MOQ?

Sprit, I believe I ordered 85g standard.  Since this hasn't made, can I change it to the 78g standard?

Sure! Both Updated!   

[dragonken]

I just added my order. 3x62g std, 1x62g gold, 1x65g std.

[sprit]

I 've Started Invoicing   

[pmh1410]

Waiting your invoice

[Ceedog]

How does the invoice come? Am I just billed, or do I get a request for money in an email or something?

[clacktalk]

Invoice paid : ]

[Xenderwind]

I 've Started Invoicing   

Paid, thanks again for helping me with the little request .

How does the invoice come? Am I just billed, or do I get a request for money in an email or something?

You get an invoice email through paypal.  You can literally click a link in the email to log into paypal and pay it.

[Zentaaa]

Okay i got the invoice!  -Paid

[cooldiscretion]

Paid! Can't wait to install some of these babies.

[exitfire401]

When's the deadline for payment? I get paid on Thursday.

[timsbleung]

Still open for orders for US this round?

[sprit]

Still open for orders for US this round?

Hi!      Yes!

-  Payments   :   until  July 20th  !

[malu1989]

I didn't receive an invoice yet. Hope i get it before the 20th July so i can pay it in time 

[sprit]

I didn't receive an invoice yet. Hope i get it before the 20th July so i can pay it in time 

Hello!  Sure! 

I am back home, doing Invoicing after dinner!

[cooldiscretion]

Hey Sprit,

I just got a second invoice (Invoice 1689) for an amount less than the first (Invoice 1680). 

I've already paid the first invoice though and I'm not sure if this is an error or not.  Could you look into this, please?

I believe it may be because I resubmitted my original invoice to increase the number of springs, so I assume that invoice 1680 is the correct one.

[strict]

Paid up. Thanks sprit!

I am kind of bummed the heavy springs sampler fell through ... I was hoping to get some heavier springs for my spacebars.

[sprit]

Hey Sprit,
I believe it may be because I resubmitted my original invoice to increase the number of springs, so I assume that invoice 1680 is the correct one.

Oh! My Girl !     

# 1680 is correct !
Thanks for guiding me        
 

[sprit]

Invoicing from 15th   -   Payment by 20th   -  Production  from 21th

Worldwide    :  70%  Done
EU                :  60%  Done 
USA              :  80%  Done
Canada        :  Start Soon !

[b7ad]

Invoiced and paid, waited too long to get these babys, thanks so much Sprit! 

[HalfCent]

Paid my invoice today. Can't wait to get the springs!

[cpt_lucid]

Paid. Thanks so much Sprit!

[Fluctuation]

Shame about the larger springs. Oh well.

I've paid the invoice, can't wait to get these springs. Thanks for putting this together.

[sprit]

Shame about the larger springs. Oh well.

I've paid the invoice, can't wait to get these springs. Thanks for putting this together.

Hi!       100g  and 120g ?
Ye!  But I will try on to Produce some anyway.   I got few with me.
If It happens, I will Post that!   

The Springs and Switchs seem the Begining of All KeyTouches for me.   
I 'd like to say,  I'd prefer a Sweet Switches on a humble Case,  than a Poor Switches on a sexy Case.       


 

[yuiop]

Paid my invoice.  Thanks.

[Puddsy]

Paid yesterday.

[sprit]

Paid yesterday.

Got Your 62 Golds!

[Puddsy]

Paid yesterday.

Got Your 62 Golds!

I'm so excited, dude

I almost got some in like December but the dude bailed on me

Thanks so much for running this!!

[timsbleung]

Still open for orders for US this round?

Hi!      Yes!

-  Payments   :   until  July 20th  !

Well, I've placed the order, I guess I'll be waiting on the invoice now

I noticed in the opening post you listed mid august as a target shipping date? Is that still the plan? Because as I've noted in the order that may be an issue as i'm moving around then. I guess i can just work it out with the proxy if an issue arises?

[HoffmanMyster]

Still open for orders for US this round?

Hi!      Yes!

-  Payments   :   until  July 20th  !

Well, I've placed the order, I guess I'll be waiting on the invoice now

I noticed in the opening post you listed mid august as a target shipping date? Is that still the plan? Because as I've noted in the order that may be an issue as i'm moving around then. I guess i can just work it out with the proxy if an issue arises?

That would be me.    We can definitely work that out, and as long as there's a note it should all be good.   

[timsbleung]

Still open for orders for US this round?

Hi!      Yes!

-  Payments   :   until  July 20th  !

Well, I've placed the order, I guess I'll be waiting on the invoice now

I noticed in the opening post you listed mid august as a target shipping date? Is that still the plan? Because as I've noted in the order that may be an issue as i'm moving around then. I guess i can just work it out with the proxy if an issue arises?

That would be me.    We can definitely work that out, and as long as there's a note it should all be good.   

ok cool
I get kicked out of my place ~august 10 and I'll be homeless for about a week before I can move in to my new place
I'll be keeping tabs on this thread and when they're due to ship I'll get back in touch with you to work things out

Thanks for helping the groupbuy out!

[sprit]

Invoicing from 15th   -   Payment by 20th   -  Production  from 21th   

Worldwide    :  Invoicing  80%  Done,   Payment  70% Done   
EU                :  Invoicing  90%  Done,   Payment  80% Done   
USA              :  Invoicing  90%  Done,   Payment  75% Done   
Canada        :  Invoicing Started !