Author Topic: G80-1838HPU/01 Trouble  (Read 2852 times)

0 Members and 1 Guest are viewing this topic.

Offline ApocalypseMaow

  • Kitteh Overlord
  • Thread Starter
  • Posts: 1877
  • Location: Arkansas
  • Say WHAAT...
G80-1838HPU/01 Trouble
« on: Sat, 22 March 2014, 22:55:27 »
So here is my issue... My G80 is connected to a Perixx PS2 to usb and everything works great when typing.

Now when playing a game, after holding W for a few seconds it cuts out... If the hit space to jump, I start moving again but only for a few seconds...

Pulled case off and all connections look great.

HALP!!!
{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015

Offline Daniel Beardsmore

  • Posts: 1874
  • Location: Hertfordshire, England
  • RIP
    • Boring twaddle
Re: G80-1838HPU/01 Trouble
« Reply #1 on: Sun, 23 March 2014, 07:58:54 »
Might be worth trying a different converter — sounds like a converter fault.
Bore Awards
Most Boring Person on the Planet – 2011 Winner

Offline blackbox

  • Posts: 725
Re: G80-1838HPU/01 Trouble
« Reply #2 on: Sun, 23 March 2014, 10:41:37 »
Agreed, Try another converter. Cannot see why it should by an keyboard failure.
Keyboards: Dell AT102W (matias standard clicky), Maltron two-hand 3D fully ergonomic keyboard (Vintage MX Black). CM QF XT (MX Grey) IBM model M

The LAN table!
http://geekhack.org/index.php?topic=62536.0

Offline mougrim

  • Posts: 768
  • Location: Ukraine
Re: G80-1838HPU/01 Trouble
« Reply #3 on: Sun, 23 March 2014, 10:45:54 »
Try it with a PS/2 motherboard first - just to be sure.
IBM AT Model F, Vortexgear Race 3, AEKII (Alps Cream Damped), Metoo Zero (modded to Kailh Box Navy)

Offline blackbox

  • Posts: 725
Re: G80-1838HPU/01 Trouble
« Reply #4 on: Sun, 23 March 2014, 11:24:57 »
Try it with a PS/2 motherboard first - just to be sure.

Good idea, if he has one.
Keyboards: Dell AT102W (matias standard clicky), Maltron two-hand 3D fully ergonomic keyboard (Vintage MX Black). CM QF XT (MX Grey) IBM model M

The LAN table!
http://geekhack.org/index.php?topic=62536.0

Offline mougrim

  • Posts: 768
  • Location: Ukraine
Re: G80-1838HPU/01 Trouble
« Reply #5 on: Sun, 23 March 2014, 11:26:56 »
Try it with a PS/2 motherboard first - just to be sure.

Good idea, if he has one.

There always one nearby :)
IBM AT Model F, Vortexgear Race 3, AEKII (Alps Cream Damped), Metoo Zero (modded to Kailh Box Navy)

Offline blackbox

  • Posts: 725
Re: G80-1838HPU/01 Trouble
« Reply #6 on: Sun, 23 March 2014, 11:46:49 »
Try it with a PS/2 motherboard first - just to be sure.

Good idea, if he has one.

There always one nearby :)
For us it is but that might not be the case for him.
Keyboards: Dell AT102W (matias standard clicky), Maltron two-hand 3D fully ergonomic keyboard (Vintage MX Black). CM QF XT (MX Grey) IBM model M

The LAN table!
http://geekhack.org/index.php?topic=62536.0

Offline ApocalypseMaow

  • Kitteh Overlord
  • Thread Starter
  • Posts: 1877
  • Location: Arkansas
  • Say WHAAT...
Re: G80-1838HPU/01 Trouble
« Reply #7 on: Sun, 23 March 2014, 22:41:32 »
Thanks dudes! Gonna try out a new converter! Both my rigs are missing PS2 ports (z87 sabertooth and P8Z77 I deluxe)
You're killing me Asus!!!
{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015

Offline IvanIvanovich

  • Mr. Silk Underwear
  • Posts: 8199
  • Location: USA
Re: G80-1838HPU/01 Trouble
« Reply #8 on: Mon, 24 March 2014, 12:58:26 »
I would highly recommend the idinnovations ps/2 to usb. I got a couple when there was a groupbuy on here for them. I find them to be the best and don't suffer from frequent reset problem like many others.

Offline mougrim

  • Posts: 768
  • Location: Ukraine
Re: G80-1838HPU/01 Trouble
« Reply #9 on: Mon, 24 March 2014, 13:02:34 »
Thanks dudes! Gonna try out a new converter! Both my rigs are missing PS2 ports (z87 sabertooth and P8Z77 I deluxe)
You're killing me Asus!!!
Asrock z68 and i5 Sandy Bridge. With native PS/2 port. I'm OK for time being :)
IBM AT Model F, Vortexgear Race 3, AEKII (Alps Cream Damped), Metoo Zero (modded to Kailh Box Navy)

Offline blackbox

  • Posts: 725
Re: G80-1838HPU/01 Trouble
« Reply #10 on: Mon, 24 March 2014, 15:19:43 »
Thanks dudes! Gonna try out a new converter! Both my rigs are missing PS2 ports (z87 sabertooth and P8Z77 I deluxe)
You're killing me Asus!!!

I see. The solution is to buy an asus rampage 4 black edition to test native ps/2. or maybe not.

I would highly recommend the idinnovations ps/2 to usb. I got a couple when there was a groupbuy on here for them. I find them to be the best and don't suffer from frequent reset problem like many others.

Good, I have an ps/2 adapter that i am satisfied with but I do not remeber the name of the converter.
Keyboards: Dell AT102W (matias standard clicky), Maltron two-hand 3D fully ergonomic keyboard (Vintage MX Black). CM QF XT (MX Grey) IBM model M

The LAN table!
http://geekhack.org/index.php?topic=62536.0

Offline ApocalypseMaow

  • Kitteh Overlord
  • Thread Starter
  • Posts: 1877
  • Location: Arkansas
  • Say WHAAT...
Re: G80-1838HPU/01 Trouble
« Reply #11 on: Mon, 24 March 2014, 20:15:00 »
I would highly recommend the idinnovations ps/2 to usb. I got a couple when there was a groupbuy on here for them. I find them to be the best and don't suffer from frequent reset problem like many others.
Thanks for the link Ivan! I'll be ordering one now!

Thanks dudes! Gonna try out a new converter! Both my rigs are missing PS2 ports (z87 sabertooth and P8Z77 I deluxe)
You're killing me Asus!!!
Nothing wrong with SB! I still have a 2700K kicking! It's a good chip.
Asrock z68 and i5 Sandy Bridge. With native PS/2 port. I'm OK for time being :)

Thanks dudes! Gonna try out a new converter! Both my rigs are missing PS2 ports (z87 sabertooth and P8Z77 I deluxe)
You're killing me Asus!!!

I see. The solution is to buy an asus rampage 4 black edition to test native ps/2. or maybe not.

Well now I have a reason to get one... My wife thanks you for your help!  :))
{WTT}HoffNudes(WTS)BLK LightSaverV2         
"#baby****fangerz" -Vesper 2015