« previous next »
Pages:  [1]     Go Down

Author Topic: Having problems with my Ducky Shine 3  (Read 2188 times)

0 Members and 1 Guest are viewing this topic.

Offline markexodia

  • Thread Starter
  • Posts: 7
Having problems with my Ducky Shine 3
« on: Mon, 02 June 2014, 19:28:03 »
I don't know whether is it correct to post here or not but heres my issue.
Some keys are on with dim light..  even with my LED mode off.. some leds of mine are still light up but it's dim.. any idea guys? tried totally offing it and changing usb ports. Still the same... Only been using it for 2 months....
Logged

Offline Firebolt1914

  • POM Overlord
  • Posts: 703
Re: Having problems with my Ducky Shine 3
« Reply #1 on: Mon, 02 June 2014, 20:10:43 »
Which keys are they; also can you post a picture if possible?
Logged

Offline C5Allroad

  • Formerly HUNTERANGEL121
  • Posts: 1237
  • Location: Miami, FL
  • Watch out, I post when half asleep.
Re: Having problems with my Ducky Shine 3
« Reply #2 on: Mon, 02 June 2014, 20:21:20 »
With the newest firmware, F11 and F12 are you're user configurable leds.
Press either till they go bright again and then you can cycle through the main modes.
Or Press and hold Fn+F10 to turn them all off and turn it on again.
If you ever need to reset it, hold both winkeys at the same time, it will reset the whole board.
Good luck! :p
Logged

Offline markexodia

  • Thread Starter
  • Posts: 7
Re: Having problems with my Ducky Shine 3
« Reply #3 on: Tue, 03 June 2014, 02:12:53 »
Quote from: Firebolt1914 on Mon, 02 June 2014, 20:10:43
Which keys are they; also can you post a picture if possible?

Here is a picture of it
Logged

Offline markexodia

  • Thread Starter
  • Posts: 7
Re: Having problems with my Ducky Shine 3
« Reply #4 on: Tue, 03 June 2014, 02:13:30 »
Quote from: HUNTERANGEL121 on Mon, 02 June 2014, 20:21:20
With the newest firmware, F11 and F12 are you're user configurable leds.
Press either till they go bright again and then you can cycle through the main modes.
Or Press and hold Fn+F10 to turn them all off and turn it on again.
If you ever need to reset it, hold both winkeys at the same time, it will reset the whole board.
Good luck! :p

i tried resetting.. but it didn't work..  :(
Logged

Offline C5Allroad

  • Formerly HUNTERANGEL121
  • Posts: 1237
  • Location: Miami, FL
  • Watch out, I post when half asleep.
Re: Having problems with my Ducky Shine 3
« Reply #5 on: Tue, 03 June 2014, 05:05:16 »
Quote from: markexodia on Tue, 03 June 2014, 02:13:30
Quote from: HUNTERANGEL121 on Mon, 02 June 2014, 20:21:20
With the newest firmware, F11 and F12 are you're user configurable leds.
Press either till they go bright again and then you can cycle through the main modes.
Or Press and hold Fn+F10 to turn them all off and turn it on again.
If you ever need to reset it, hold both winkeys at the same time, it will reset the whole board.
Good luck! :p

i tried resetting.. but it didn't work..  :(
What version firmware are you on?
Logged

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: Having problems with my Ducky Shine 3
« Reply #6 on: Tue, 03 June 2014, 05:42:43 »
It seems odd that it is a few alternate keys in one row - like is there a short on the PCB maybe?

If this is still under warranty, and no-one can think of anything that will probably turn out to be blindingly obvious, can you RMA it?
Logged
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline Firebolt1914

  • POM Overlord
  • Posts: 703
Re: Having problems with my Ducky Shine 3
« Reply #7 on: Tue, 03 June 2014, 19:04:00 »
Try pressing the fn/menu key and print screen, then pressing the keys that are still on. I'm pretty sure it's a hardware issue, but it's worth a shot.
Logged

Offline markexodia

  • Thread Starter
  • Posts: 7
Re: Having problems with my Ducky Shine 3
« Reply #8 on: Wed, 04 June 2014, 01:59:40 »
Quote from: HUNTERANGEL121 on Tue, 03 June 2014, 05:05:16
Quote from: markexodia on Tue, 03 June 2014, 02:13:30
Quote from: HUNTERANGEL121 on Mon, 02 June 2014, 20:21:20
With the newest firmware, F11 and F12 are you're user configurable leds.
Press either till they go bright again and then you can cycle through the main modes.
Or Press and hold Fn+F10 to turn them all off and turn it on again.
If you ever need to reset it, hold both winkeys at the same time, it will reset the whole board.
Good luck! :p

i tried resetting.. but it didn't work..  :(
What version firmware are you on?

Latest Firmware
Logged

Offline markexodia

  • Thread Starter
  • Posts: 7
Re: Having problems with my Ducky Shine 3
« Reply #9 on: Wed, 04 June 2014, 03:25:05 »
Quote from: rowdy on Tue, 03 June 2014, 05:42:43
It seems odd that it is a few alternate keys in one row - like is there a short on the PCB maybe?

If this is still under warranty, and no-one can think of anything that will probably turn out to be blindingly obvious, can you RMA it?

i tried contacting my supplier already, he said might be the firmware issue....
Logged

Offline markexodia

  • Thread Starter
  • Posts: 7
Re: Having problems with my Ducky Shine 3
« Reply #10 on: Wed, 04 June 2014, 03:28:36 »
Quote from: Firebolt1914 on Tue, 03 June 2014, 19:04:00
Try pressing the fn/menu key and print screen, then pressing the keys that are still on. I'm pretty sure it's a hardware issue, but it's worth a shot.

i tried to off all the LED but the led is still light up dim, even in off
Logged

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Re: Having problems with my Ducky Shine 3
« Reply #11 on: Wed, 04 June 2014, 05:18:35 »
Firmware is upgradeable.  If you are sure you are running the latest version, then there is nothing else that you can do to the firmware.

My Shine 3 does not exhibit this, but I have not idea what firmware it is running.  I can turn all LEDs on, or all LEDs off (or any of the intermediate flashing modes).
Logged
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline C5Allroad

  • Formerly HUNTERANGEL121
  • Posts: 1237
  • Location: Miami, FL
  • Watch out, I post when half asleep.
Re: Having problems with my Ducky Shine 3
« Reply #12 on: Wed, 04 June 2014, 05:19:14 »
Quote from: markexodia on Wed, 04 June 2014, 03:28:36
Quote from: Firebolt1914 on Tue, 03 June 2014, 19:04:00
Try pressing the fn/menu key and print screen, then pressing the keys that are still on. I'm pretty sure it's a hardware issue, but it's worth a shot.

i tried to off all the LED but the led is still light up dim, even in off
You say the led as if it is just one. Could this be the space bar?
If not, what key is it?
Logged
Pages:  [1]     Go Up
« previous next »