Author Topic: [GB][DONE] ROUND 2 LeandreN plate(designed by JDcarpe) + SPRiT PCB (Read 187931 times)

seigmenn · « **Reply #750 on:** Wed, 07 October 2015, 02:43:22 »

Quote from: romevi on Tue, 06 October 2015, 21:41:47

Don't suppose someone has a blue one they'd be willing to sell? Finally found a perfect case to get and begin my 60% journey.

Care to share more info about the case?

romevi · « **Reply #751 on:** Wed, 07 October 2015, 09:41:52 »

Quote from: seigmenn on Wed, 07 October 2015, 02:43:22

Quote from: romevi on Tue, 06 October 2015, 21:41:47
Don't suppose someone has a blue one they'd be willing to sell? Finally found a perfect case to get and begin my 60% journey.

Care to share more info about the case?

This one:

I think it'll look sexy with a blue plate and some Zealios.

LeandreN · « **Reply #752 on:** Wed, 07 October 2015, 15:46:57 »

http://leandren.bigcartel.com/

soon

romevi · « **Reply #753 on:** Wed, 07 October 2015, 15:58:47 »

Quote from: LeandreN on Wed, 07 October 2015, 15:46:57

http://leandren.bigcartel.com/

soon

Ah, perfect! Thanks!
It said Sold Out before, but I guess you just updated it.

LeandreN · « **Reply #754 on:** Wed, 07 October 2015, 16:23:00 »

Selling quick!

romevi · « **Reply #755 on:** Wed, 07 October 2015, 16:32:57 »

Quote from: LeandreN on Wed, 07 October 2015, 16:23:00

Selling quick!

F**********k me. For some reason I was going by the original GB price as the base price. Short a few diddly-dollaroos. If anyone happens to have an extra plate in blue in about a week or two, I'd gladly buy it off you.

nmur · « **Reply #756 on:** Wed, 07 October 2015, 19:17:34 »

Managed to wake up just in time to pick up a PCB and stabs

swornxin · « **Reply #757 on:** Wed, 07 October 2015, 20:20:36 »

Grabbed a black PCB. Not sure if my plate has already been sent yet. Excited to put something together with some 62g Zealios.

DanielT · « **Reply #758 on:** Wed, 07 October 2015, 23:39:55 »

Damn, too late for a PCB

tofgerl · « **Reply #759 on:** Wed, 07 October 2015, 23:44:52 »

Mother... I was asleep!

LeandreN · « **Reply #760 on:** Thu, 08 October 2015, 01:18:10 »

Quote from: swornxin on Wed, 07 October 2015, 20:20:36

Grabbed a black PCB. Not sure if my plate has already been sent yet. Excited to put something together with some 62g Zealios.

Plate and PCB well ship this week

rddm · « **Reply #761 on:** Thu, 08 October 2015, 10:13:08 »

Go for a new round, I really need a PCB ahah

rpeterclark · « **Reply #762 on:** Thu, 08 October 2015, 14:02:37 »

There was a bit of a mixup with my order at first, but LeandreN was quick to send out the corrected stuff, which came in yesterday. Thanks again LeandreN!! :-)

trenzafeeds · « **Reply #763 on:** Thu, 08 October 2015, 19:58:28 »

Got everything. Thanks for remembering the Greetech samples Leandren, I totally forgot about them myself, they were a nice little surprise.

LeandreN · « **Reply #764 on:** Sat, 10 October 2015, 01:38:52 »

Quote from: rpeterclark on Thu, 08 October 2015, 14:02:37

There was a bit of a mixup with my order at first, but LeandreN was quick to send out the corrected stuff, which came in yesterday. Thanks again LeandreN!! :-)

Show Image

Thanks for posting!

dav1k · « **Reply #765 on:** Sat, 10 October 2015, 03:13:13 »

I got my package this past Monday (Oct. 5th, 2015). Everything arrived in flawless condition. I got a silver plate, white PCB, gold 65g springs, and a really killer gold stab set.

Really enjoyed being a part of this group buy. The items are amazing and I cannot wait as more parts for my keyboard arrive in the coming weeks.

Thanks LeandreN. Excellent work!

LeandreN · « **Reply #766 on:** Sat, 10 October 2015, 04:05:31 »

Want an acrylic case?

https://www.reddit.com/r/mechmarket/comments/3o5bce/gb_dulphins_acrylic_cases_for_60_keyboards/

tofgerl · « **Reply #767 on:** Sat, 10 October 2015, 06:44:25 »

Extra plates received! Beautiful!

Now I just need to dig up some PCBs. Possibly through alchemy, or TaoBao.

ika · « **Reply #768 on:** Sat, 10 October 2015, 11:36:53 »

Quote from: LeandreN on Sat, 10 October 2015, 04:05:31

Want an acrylic case?

https://www.reddit.com/r/mechmarket/comments/3o5bce/gb_dulphins_acrylic_cases_for_60_keyboards/

How do his cases compare to TEX cnc acrylic?

LeandreN · « **Reply #769 on:** Sat, 10 October 2015, 11:39:01 »

Quote from: ika on Sat, 10 October 2015, 11:36:53

Quote from: LeandreN on Sat, 10 October 2015, 04:05:31
Want an acrylic case?

https://www.reddit.com/r/mechmarket/comments/3o5bce/gb_dulphins_acrylic_cases_for_60_keyboards/
How do his cases compare to TEX cnc acrylic?

Haven't tried it, but this one is very sturdy

malcomkern · « **Reply #770 on:** Sat, 10 October 2015, 12:49:18 »

Ordered one of the frosted cases. Was looking for a heavy Alu case but after experimenting some with leds on the bottom side of the PCB this might be a nice case to see the glow on the desk.

rpeterclark · « **Reply #771 on:** Sat, 10 October 2015, 16:39:22 »

Just wanted to show off what I put together with the order from LeandreN!

LeandreN's purple plate and Sprit blue PCB, ultraviolet LEDs, SIP socketed, Gateron clear's dyed violet, el cheapo clear case from Aliexpress, Sprit gold stabs (7u space bar). Going to put JTK purple/white on it when it arrives. I'm really happy with it!

LeandreN · « **Reply #772 on:** Sat, 10 October 2015, 16:44:14 »

Quote from: rpeterclark on Sat, 10 October 2015, 16:39:22

Just wanted to show off what I put together with the order from LeandreN!

Show Image

Show Image

Show Image

LeandreN's purple plate and Sprit blue PCB, ultraviolet LEDs, SIP socketed, Gateron clear's dyed violet, el cheapo clear case from Aliexpress, Sprit gold stabs (7u space bar). Going to put JTK purple/white on it when it arrives. I'm really happy with it!

Wow.

LeandreN · « **Reply #773 on:** Sat, 10 October 2015, 18:01:19 »

If you want to see me build a SPRiT keyboard, look no further.

trenzafeeds · « **Reply #774 on:** Sat, 10 October 2015, 18:03:08 »

Quote from: LeandreN on Sat, 10 October 2015, 18:01:19

If you want to see me build a SPRiT keyboard, look no further.

This'll be great for all the first timers. You're a champ Leandren.

LeandreN · « **Reply #775 on:** Sat, 10 October 2015, 18:03:54 »

Quote from: trenzafeeds on Sat, 10 October 2015, 18:03:08

Quote from: LeandreN on Sat, 10 October 2015, 18:01:19
If you want to see me build a SPRiT keyboard, look no further.

This'll be great for all the first timers. You're a champ Leandren.

It's a bit intense, but it'll do

Thanks!

azhdar · « **Reply #776 on:** Sat, 10 October 2015, 18:14:41 »

Quote from: LeandreN on Sat, 10 October 2015, 18:01:19

If you want to see me build a SPRiT keyboard, look no further.

Good build log video. Altough I would suggest you to handle lubed parts (stems/stabs) with tweezers and not let it rest on the desk or mousepad.

E3E · « **Reply #777 on:** Sat, 10 October 2015, 18:33:48 »

Quote from: LeandreN on Sat, 10 October 2015, 18:01:19

If you want to see me build a SPRiT keyboard, look no further.

I can't deny it, LeandreN, you make ISO sexy.

ideus · « **Reply #778 on:** Sun, 11 October 2015, 11:46:55 »

Is there a plate available? Maybe some leftovers?

romevi · « **Reply #779 on:** Sun, 11 October 2015, 12:30:51 »

Quote from: ideus on Sun, 11 October 2015, 11:46:55

Is there a plate available? Maybe some leftovers?

Have you checked the site? There are a few colors available. I was able to order a blue one yesterday.

andysun · « **Reply #780 on:** Sun, 11 October 2015, 14:21:26 »

Hey, finished my build yesterday!

Really like the final result and the whole process, thanks LeandreN!

The build: http://imgur.com/a/ddFD5

EDIT: dat blue plate

LeandreN · « **Reply #781 on:** Sun, 11 October 2015, 14:24:45 »

Quote from: andysun on Sun, 11 October 2015, 14:21:26

Hey, finished my build yesterday!

Really like the final result and the whole process, thanks LeandreN!

The build: http://imgur.com/a/ddFD5

Show Image

EDIT: dat blue plate ;D

Saw it on Reddit. Thanks for posting! Awesome build.

LeandreN · « **Reply #782 on:** Mon, 12 October 2015, 10:17:51 »

Hey, some of you were looking for a case. I just saw Dulphin has lowered the price. 60$ shipped is VERY reasonable for Europe and for an acrylic case. 70$ is also a great shipped price for International.

https://www.reddit.com/r/mechmarket/comments/3of85j/gb_dulphins_acrylic_cases_for_60_keyboards/

ideus · « **Reply #783 on:** Mon, 12 October 2015, 11:46:57 »

Quote from: LeandreN on Mon, 12 October 2015, 10:17:51

Hey, some of you were looking for a case. I just saw Dulphin has lowered the price. 60$ shipped is VERY reasonable for Europe and for an acrylic case. 70$ is also a great shipped price for International.

https://www.reddit.com/r/mechmarket/comments/3of85j/gb_dulphins_acrylic_cases_for_60_keyboards/

Thank you for the reference. How does this case compare with the Tex Acrylic CNC case?

LeandreN · « **Reply #784 on:** Mon, 12 October 2015, 12:04:45 »

Quote from: ideus on Mon, 12 October 2015, 11:46:57

Quote from: LeandreN on Mon, 12 October 2015, 10:17:51
Hey, some of you were looking for a case. I just saw Dulphin has lowered the price. 60$ shipped is VERY reasonable for Europe and for an acrylic case. 70$ is also a great shipped price for International.

https://www.reddit.com/r/mechmarket/comments/3of85j/gb_dulphins_acrylic_cases_for_60_keyboards/

Thank you for the reference. How does this case compare with the Tex Acrylic CNC case?

I haven't tried the TEX acrylic, but this one feels really nice and solid to be honest.

krbuck · « **Reply #785 on:** Mon, 12 October 2015, 21:26:08 »

Any extra PCBs?

joey · « **Reply #786 on:** Tue, 13 October 2015, 06:53:12 »

Got a replacement in the mail today (had no luck with unbending my first plate). In a nice box this time, so hopefully everything inside is fine!

Will check after work.

fgsz291 · « **Reply #787 on:** Wed, 14 October 2015, 11:30:41 »

Thanks to LeandreN, awesome support from a groupbuy "host", this was my first groupbuy but surely not my last. Thanks again and keep up the good work

joey · « **Reply #788 on:** Wed, 14 October 2015, 11:54:16 »

My new plates are excellent! Thanks LeandreN!

LeandreN · « **Reply #789 on:** Wed, 14 October 2015, 15:47:28 »

Thanks ! Both og you.

Tyr · « **Reply #790 on:** Fri, 16 October 2015, 07:30:02 »

Got my box. Everything looks beautiful. Did get 2 white pcb's (ordered one black and one white) but they look so nice I won't complain

LeandreN · « **Reply #791 on:** Sat, 17 October 2015, 10:00:32 »

Most of you have received your orders now?

nmur · « **Reply #792 on:** Sat, 17 October 2015, 10:09:04 »

Quote from: LeandreN on Sat, 17 October 2015, 10:00:32

Most of you have received your orders now?

I think mine shipped out after you put the extra pcbs up on your site. I'm on the other side of the world so it will take a while though

Will post pics

swornxin · « **Reply #793 on:** Sat, 17 October 2015, 18:30:31 »

Got mine today! Plate is perfect! The PCB is missing a resistor (?) on the 2 though. Should I be worried about this, or will it still work fine.

trenzafeeds · « **Reply #794 on:** Sat, 17 October 2015, 18:53:17 »

Quote from: swornxin on Sat, 17 October 2015, 18:30:31

Got mine today! Plate is perfect! The PCB is missing a resistor (?) on the 2 though. Should I be worried about this, or will it still work fine.

Depends if its a resistor or a diode. If you're missing a diode you'd better ****ing solder one on. If you're missing a resistor and you're not planning on using an LED on that key, then no problem, but if you are then you should add one. Also, another Burlington person??? This is getting out of control.

swornxin · « **Reply #795 on:** Sat, 17 October 2015, 20:47:26 »

Quote from: trenzafeeds on Sat, 17 October 2015, 18:53:17

Quote from: swornxin on Sat, 17 October 2015, 18:30:31
Got mine today! Plate is perfect! The PCB is missing a resistor (?) on the 2 though. Should I be worried about this, or will it still work fine.
Depends if its a resistor or a diode. If you're missing a diode you'd better ****ing solder one on. If you're missing a resistor and you're not planning on using an LED on that key, then no problem, but if you are then you should add one. Also, another Burlington person??? This is getting out of control.

Burlington, Ontario, Canada. Haha. You're not the first person to say that though.

)

It looks like it was soldered at some point, but broke off? Any advice?

Tyr · « **Reply #796 on:** Sun, 18 October 2015, 08:57:18 »

Quote from: swornxin on Sat, 17 October 2015, 20:47:26

It looks like it was soldered at some point, but broke off? Any advice?

Diodes are dirt cheap. and there's holes for a through hole one if you don't want to do an smd. Or you could just jump it with a small wire, diodes are there to fix ghosting and masking when multiple keys are pressed at once. How many keycombo's are you making where you're holding down "2" ?

tofgerl · « **Reply #797 on:** Sun, 18 October 2015, 09:27:41 »

Well, there's always gaming, where the 2 key almost always is one of the main weapons, and you frequently want to change weapons while walking, strafing, jumping and shooting at the same time.

But your point is both correct and good. Diodes and resistors are almost thrown after you when buying other components.

petrock · « **Reply #798 on:** Sun, 18 October 2015, 12:24:57 »

I got my order yesterday! I will post some pictures when I get the build going!

Thank you!

swornxin · « **Reply #799 on:** Sun, 18 October 2015, 14:02:04 »

Quote from: Tyr on Sun, 18 October 2015, 08:57:18

Quote from: swornxin on Sat, 17 October 2015, 20:47:26
It looks like it was soldered at some point, but broke off? Any advice?

Diodes are dirt cheap. and there's holes for a through hole one if you don't want to do an smd. Or you could just jump it with a small wire, diodes are there to fix ghosting and masking when multiple keys are pressed at once. How many keycombo's are you making where you're holding down "2" ?

I won't be doing much with it. Mostly using this board for typing at school I think. I wanted to run LEDs in all of the switches though. I know nothing about this kind of thing though. I can solder just fine. If I'm using LEDS, should I solder a new diode in? What diode do I need and where can I get it? Haha. Like I said, I know nothing. Anything helps.

News:

Author Topic: [GB][DONE] ROUND 2 LeandreN plate(designed by JDcarpe) + SPRiT PCB (Read 187931 times)