Author Topic: [GB][CLOSED] LeandreN Round 4, 60% kits, HHKB and winkeyless plates (Read 285939 times)

LeandreN · « **Reply #750 on:** Tue, 10 May 2016, 12:52:23 »

http://imgur.com/a/nmbCj

Take a look!

xondat · « **Reply #751 on:** Tue, 10 May 2016, 12:53:10 »

Quote from: LeandreN on Tue, 10 May 2016, 12:52:23

http://imgur.com/a/nmbCj

Take a look!

That looks a lot better than I expected. Infact I didn't know what to expect.

Porkins · « **Reply #752 on:** Tue, 10 May 2016, 12:57:12 »

Quote from: LeandreN on Tue, 10 May 2016, 12:52:23

http://imgur.com/a/nmbCj

Take a look!

I can't wait. I'm going with a black plate and the clear Tex acrylic case.

biocalves · « **Reply #753 on:** Tue, 10 May 2016, 13:09:05 »

Quote from: LeandreN on Tue, 10 May 2016, 12:52:23

http://imgur.com/a/nmbCj

Take a look!

Regretting going with a boring Universal plate now. Hoping you'll have some spare HHKB layouts made in Orange...Damn my short-sightedness!

dorf · « **Reply #754 on:** Tue, 10 May 2016, 13:42:29 »

Quote from: Porkins on Tue, 10 May 2016, 12:57:12

Quote from: LeandreN on Tue, 10 May 2016, 12:52:23
http://imgur.com/a/nmbCj

Take a look!

I can't wait. I'm going with a black plate and the clear Tex acrylic case.

I'm planning to use a black aluminum TEX-case. Are there any known issues with Nerd 60 and TEX-case?

Porkins · « **Reply #755 on:** Tue, 10 May 2016, 14:20:37 »

Quote from: dorf on Tue, 10 May 2016, 13:42:29

Quote from: Porkins on Tue, 10 May 2016, 12:57:12
Quote from: LeandreN on Tue, 10 May 2016, 12:52:23
http://imgur.com/a/nmbCj

Take a look!

I can't wait. I'm going with a black plate and the clear Tex acrylic case.

I'm planning to use a black aluminum TEX-case. Are there any known issues with Nerd 60 and TEX-case?

I don't think so, not with the aluminum cases at least. I have heard there is some modding to do if you are going to use the side leds on the bottom of the pcb with the acrylic case. I am new to this so I am going to see what it looks like to mount the bottom LEDS flat instead of on their side and see if that makes a difference.

Willyc277 · « **Reply #756 on:** Tue, 10 May 2016, 14:35:18 »

Quote from: LeandreN on Tue, 10 May 2016, 12:52:23

http://imgur.com/a/nmbCj

Take a look!

DAMN THAT LOOKS GOOD

HYPE LEVELS OVER 9000

pichu23 · « **Reply #757 on:** Tue, 10 May 2016, 17:28:05 »

Quote from: LeandreN on Tue, 10 May 2016, 12:52:23

http://imgur.com/a/nmbCj

Take a look!

Whoaa that looks sooo good

Malenky · « **Reply #758 on:** Tue, 10 May 2016, 18:00:42 »

More and more interested in a HHKB plate in addition to my universal.

Erysichthon · « **Reply #759 on:** Tue, 10 May 2016, 19:18:42 »

Quote from: LeandreN on Mon, 09 May 2016, 16:25:00

Quote from: mesteris on Mon, 09 May 2016, 16:20:39
Did you get the blue plates yet? I need to know if should accelerate my parts buying.

Negative. I am doing some colour modifications on them. They turned out a too light.

Are those going to take much longer than other plates then since they're farther back in queue?

TalkingTree · « **Reply #760 on:** Thu, 12 May 2016, 04:01:37 »

LeandreN, since the GB is running smooth and appearently ahead of schedule, can you tease us with more of this?

LeandreN · « **Reply #761 on:** Thu, 12 May 2016, 04:59:22 »

Quote from: TalkingTree on Thu, 12 May 2016, 04:01:37

LeandreN, since the GB is running smooth and appearently ahead of schedule, can you tease us with more of this?

Haha. Soon.

Your package went out yesterday, and I even remembered the Gateron blues.

LeandreN · « **Reply #762 on:** Thu, 12 May 2016, 05:02:35 »

Quote from: Erysichthon on Tue, 10 May 2016, 19:18:42

Quote from: LeandreN on Mon, 09 May 2016, 16:25:00
Quote from: mesteris on Mon, 09 May 2016, 16:20:39
Did you get the blue plates yet? I need to know if should accelerate my parts buying.

Negative. I am doing some colour modifications on them. They turned out a too light.

Are those going to take much longer than other plates then since they're farther back in queue?

Yes. It will take a few more weeks before I get them.

TalkingTree · « **Reply #763 on:** Thu, 12 May 2016, 05:25:28 »

Quote from: LeandreN on Thu, 12 May 2016, 04:59:22

Your package went out yesterday, and I even remembered the Gateron blues.

Already?

Diokhan · « **Reply #764 on:** Thu, 12 May 2016, 05:40:48 »

Quote from: TalkingTree on Thu, 12 May 2016, 05:25:28

Quote from: LeandreN on Thu, 12 May 2016, 04:59:22
Your package went out yesterday, and I even remembered the Gateron blues.
Already?
Show Image

I think from manufacturer/gon to him

LeandreN · « **Reply #765 on:** Thu, 12 May 2016, 05:42:05 »

Quote from: Diokhan on Thu, 12 May 2016, 05:40:48

Quote from: TalkingTree on Thu, 12 May 2016, 05:25:28
Quote from: LeandreN on Thu, 12 May 2016, 04:59:22
Your package went out yesterday, and I even remembered the Gateron blues.
Already?
Show Image

I think from manufacturer/gon to him

Nope. I have shipped a total of 10 packages.
140 to go.

Just bought more shipping material today, since I had no more clear tape.

Diokhan · « **Reply #766 on:** Thu, 12 May 2016, 05:43:34 »

Quote from: LeandreN on Thu, 12 May 2016, 05:42:05

Quote from: Diokhan on Thu, 12 May 2016, 05:40:48
Quote from: TalkingTree on Thu, 12 May 2016, 05:25:28
Quote from: LeandreN on Thu, 12 May 2016, 04:59:22
Your package went out yesterday, and I even remembered the Gateron blues.
Already?
Show Image

I think from manufacturer/gon to him
Nope. I have shipped a total of 10 packages.
140 to go.

Just bought more shipping material today, since I had no more clear tape.

Woa! that went fast!
Did you get the case that zip made for me as well? :D

LeandreN · « **Reply #767 on:** Thu, 12 May 2016, 05:44:23 »

Quote from: Diokhan on Thu, 12 May 2016, 05:43:34

Quote from: LeandreN on Thu, 12 May 2016, 05:42:05
Quote from: Diokhan on Thu, 12 May 2016, 05:40:48
Quote from: TalkingTree on Thu, 12 May 2016, 05:25:28
Quote from: LeandreN on Thu, 12 May 2016, 04:59:22
Your package went out yesterday, and I even remembered the Gateron blues.
Already?
Show Image

I think from manufacturer/gon to him
Nope. I have shipped a total of 10 packages.
140 to go.

Just bought more shipping material today, since I had no more clear tape.

Woa! that went fast!
Did you get the case that zip made for me as well? :D

I don't have any case from Zip yet.

Sent fra min Nexus 5X via Tapatalk

TalkingTree · « **Reply #768 on:** Thu, 12 May 2016, 05:49:43 »

Quote from: LeandreN on Thu, 12 May 2016, 05:42:05

I have shipped a total of 10 packages.

Can't wait. I'll start heating up my soldering iron.

Malenky · « **Reply #769 on:** Thu, 12 May 2016, 07:08:05 »

Cannot wait! Unfortunately, I'll have to wait for my aluminium case from Massdrop for ages (no doubt more delays ahead), so my build with this is going to be in either a cheap white plastic case or the low profile white Pok3r case. I suppose I could spray it, that white is just too white.

JorisBoers · « **Reply #770 on:** Thu, 12 May 2016, 08:48:59 »

Thanks LeandreN!

LeandreN · « **Reply #771 on:** Thu, 12 May 2016, 08:58:03 »

That was fast.Thanks for sharing Joris!

Updates tonight

GoatMaster · « **Reply #772 on:** Thu, 12 May 2016, 09:03:58 »

WOW

Waiting ...

audax989 · « **Reply #773 on:** Thu, 12 May 2016, 09:05:09 »

Now I want an hhkb plate more and more.

can't wait for my order to get here. Also, a question. Are 1206 smd leds the max size for this board? Can it accomodate 1608 ones?

rotciveel · « **Reply #774 on:** Thu, 12 May 2016, 09:05:11 »

Quote from: JorisBoers on Thu, 12 May 2016, 08:48:59

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Thanks LeandreN!

That orange PCB looks sick!

And yay! Packages are going out! Can't wait to get my plate

Jumie · « **Reply #775 on:** Thu, 12 May 2016, 10:31:36 »

when will the leftover sale start?

phosphoric · « **Reply #776 on:** Thu, 12 May 2016, 11:20:05 »

I'TS HAPPENNINGNN

Porkins · « **Reply #777 on:** Thu, 12 May 2016, 12:28:57 »

Just got my tacking!

Porkins · « **Reply #778 on:** Thu, 12 May 2016, 14:09:15 »

Is anyone else planning on adding the bluetooth module to their build? I ordered the module and was wondering what others are doing to help ensure that the battery doesn't get punctured by the switch posts.

ideus · « **Reply #779 on:** Thu, 12 May 2016, 14:17:25 »

It is really great to see a GB doing well; considering some of the recent scams and some other cases of apparently naïve shipping mistakes, it is comforting to know that there is still hope in GH transactions.

pichu23 · « **Reply #780 on:** Thu, 12 May 2016, 17:05:53 »

Whoa that's quick. Now I really can't wait to get them

LeandreN · « **Reply #781 on:** Sat, 14 May 2016, 07:00:16 »

12 of packages went out two days ago. I will be sending out more on wednesday next week due to Norwegian holidays.

There are a lot of work left, as I only can do 6-8 packages a day, there are 150 packages to ship. I have to pick parts, fold boxes, bubblewrap, tape addresses, doublecheck payments, weigh it, fill out customs form and tape the box. For tracked orders, I use about 30 minutes to pack one package because of all the paperwork, I will not be offering tracked in the future.

Blue plates will take a while before they are here, at least 20 more days.

The last PCBs are shipping now from GON.

LeandreN

Malenky · « **Reply #782 on:** Sat, 14 May 2016, 13:17:55 »

Quote from: LeandreN on Sat, 14 May 2016, 07:00:16

12 of packages went out two days ago. I will be sending out more on wednesday next week due to Norwegian holidays.

There are a lot of work left, as I only can do 6-8 packages a day, there are 150 packages to ship. I have to pick parts, fold boxes, bubblewrap, tape addresses, doublecheck payments, weigh it, fill out customs form and tape the box. For tracked orders, I use about 30 minutes to pack one package because of all the paperwork, I will not be offering tracked in the future.

Blue plates will take a while before they are here, at least 20 more days.

The last PCBs are shipping now from GON.

LeandreN

I appreciate the work you're putting into it. In light of recent events, I am definitely all for you taking your time to do the job corrently. Thanks!

AgentZen · « **Reply #783 on:** Mon, 16 May 2016, 21:13:28 »

Thanks for the hard work LeandreN. You are making a lot of people very very happy.

N3RDLY · « **Reply #784 on:** Tue, 17 May 2016, 01:26:07 »

I've been avoiding here because I didn't want to be overwhelmed....I'm overwhelmed. _{It's shiiiiippppiiiinggggg}

wodan · « **Reply #785 on:** Tue, 17 May 2016, 03:29:11 »

LOL just got my order. LeandreN you're a legend. Still waiting for my first community GB ever to be fulfilled (Skidada+) while getting my second LeandreN GB delivered already.

LeandreN · « **Reply #786 on:** Tue, 17 May 2016, 04:11:13 »

Quote from: wodan on Tue, 17 May 2016, 03:29:11

LOL just got my order. LeandreN you're a legend. Still waiting for my first community GB ever to be fulfilled (Skidada+) while getting my second LeandreN GB delivered already.

Awesome! Looking forward to some pictures!

bnthor · « **Reply #787 on:** Tue, 17 May 2016, 04:43:48 »

Yeepee! Just received the two black plates, now I have everything to complete my First (two) custom builds

Thx a lot for this GB

Zanduby · « **Reply #788 on:** Tue, 17 May 2016, 08:41:56 »

Quote from: N3RDLY on Tue, 17 May 2016, 01:26:07

I've been avoiding here because I didn't want to be overwhelmed....I'm overwhelmed. _{It's shiiiiippppiiiinggggg}

soontm... i'm getting antsy for mine.

Malenky · « **Reply #789 on:** Tue, 17 May 2016, 09:06:17 »

LeandreN · « **Reply #790 on:** Tue, 17 May 2016, 10:38:05 »

Quote from: bnthor on Tue, 17 May 2016, 04:43:48

Yeepee! Just received the two black plates, now I have everything to complete my First (two) custom builds
Thx a lot for this GB

Awesome. Looking forward to some pictures!

phosphoric · « **Reply #791 on:** Tue, 17 May 2016, 11:30:53 »

Quote from: Zanduby on Tue, 17 May 2016, 08:41:56

Quote from: N3RDLY on Tue, 17 May 2016, 01:26:07
I've been avoiding here because I didn't want to be overwhelmed....I'm overwhelmed. _{It's shiiiiippppiiiinggggg}

soontm... i'm getting antsy for mine.

i'm screeching with anticipation for mine. my neighbors have called the police four times on me now

N3RDLY · « **Reply #792 on:** Tue, 17 May 2016, 11:49:32 »

Quote from: phosphoric on Tue, 17 May 2016, 11:30:53

Quote from: Zanduby on Tue, 17 May 2016, 08:41:56
Quote from: N3RDLY on Tue, 17 May 2016, 01:26:07
I've been avoiding here because I didn't want to be overwhelmed....I'm overwhelmed. _{It's shiiiiippppiiiinggggg}

soontm... i'm getting antsy for mine.

i'm screeching with anticipation for mine. my neighbors have called the police four times on me now

Only 4?

LeandreN · « **Reply #793 on:** Wed, 18 May 2016, 12:10:25 »

8 packages out today. My goal is 12 tomorrow.

Last PCBs came on from GON today also. Still waiting for blue plates

biocalves · « **Reply #794 on:** Wed, 18 May 2016, 12:29:15 »

Hey guys, can I source these RGB leds from mouser for underlighting?

http://www.mouser.com/ProductDetail/VCC/VAOL-S2223RGB/?qs=sGAEpiMZZMseGfSY3csMkatc7YIlwk%252bJ%252bWLzKPNjC6M%3d

Considering resistors should be presoldered, this is all I would need for underlighting right?

Porkins · « **Reply #795 on:** Wed, 18 May 2016, 12:31:07 »

Quote from: biocalves on Wed, 18 May 2016, 12:29:15

Hey guys, can I source these RGB leds from mouser for underlighting?

http://www.mouser.com/ProductDetail/VCC/VAOL-S2223RGB/?qs=sGAEpiMZZMseGfSY3csMkatc7YIlwk%252bJ%252bWLzKPNjC6M%3d

Considering resistors should be presoldered, this is all I would need for underlighting right?

I do not believe that the nerd 60 has the ability to control the rgb lights.

biocalves · « **Reply #796 on:** Wed, 18 May 2016, 12:34:22 »

Quote from: Porkins on Wed, 18 May 2016, 12:31:07

Quote from: biocalves on Wed, 18 May 2016, 12:29:15
Hey guys, can I source these RGB leds from mouser for underlighting?

http://www.mouser.com/ProductDetail/VCC/VAOL-S2223RGB/?qs=sGAEpiMZZMseGfSY3csMkatc7YIlwk%252bJ%252bWLzKPNjC6M%3d

Considering resistors should be presoldered, this is all I would need for underlighting right?

I do not believe that the nerd 60 has the ability to control the rgb lights.

Thanks for the clarification!

johuu · « **Reply #797 on:** Wed, 18 May 2016, 13:17:03 »

Quote from: JorisBoers on Thu, 12 May 2016, 08:48:59

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Show Image

Thanks LeandreN!

Just a short notice. My package arrived today. It is almost the same (ORANGE!!!

) as the one from Joris, except that i took universal plates.

Thanks LeandreN for this smooth GB!

audax989 · « **Reply #798 on:** Wed, 18 May 2016, 22:19:37 »

Quote from: biocalves on Wed, 18 May 2016, 12:34:22

Quote from: Porkins on Wed, 18 May 2016, 12:31:07
Quote from: biocalves on Wed, 18 May 2016, 12:29:15
Hey guys, can I source these RGB leds from mouser for underlighting?

http://www.mouser.com/ProductDetail/VCC/VAOL-S2223RGB/?qs=sGAEpiMZZMseGfSY3csMkatc7YIlwk%252bJ%252bWLzKPNjC6M%3d

Considering resistors should be presoldered, this is all I would need for underlighting right?

I do not believe that the nerd 60 has the ability to control the rgb lights.

Thanks for the clarification!

yeah I actually, contacted gon himself and he verified we can't use RGB smd leds for underlighting on this board.

If it helps, I ordered these cyan SMD leds for this build.

http://www.aliexpress.com/item/100PC-Lot-SMD-1206-Ice-Blue-Led-Free-Shipping-WMDZ1206008/32321503753.html

biocalves · « **Reply #799 on:** Wed, 18 May 2016, 22:32:40 »

Quote from: audax989 on Wed, 18 May 2016, 22:19:37

Quote from: biocalves on Wed, 18 May 2016, 12:34:22
Quote from: Porkins on Wed, 18 May 2016, 12:31:07
Quote from: biocalves on Wed, 18 May 2016, 12:29:15
Hey guys, can I source these RGB leds from mouser for underlighting?

http://www.mouser.com/ProductDetail/VCC/VAOL-S2223RGB/?qs=sGAEpiMZZMseGfSY3csMkatc7YIlwk%252bJ%252bWLzKPNjC6M%3d

Considering resistors should be presoldered, this is all I would need for underlighting right?

I do not believe that the nerd 60 has the ability to control the rgb lights.

Thanks for the clarification!

yeah I actually, contacted gon himself and he verified we can't use RGB smd leds for underlighting on this board.

If it helps, I ordered these cyan SMD leds for this build.

http://www.aliexpress.com/item/100PC-Lot-SMD-1206-Ice-Blue-Led-Free-Shipping-WMDZ1206008/32321503753.html

I went ahead and bought http://www.ebay.com/itm/121733474808 earlier today. Going for an orange build to match the board!

News:

Poll

PCB colour preference, we will have colours, I will decide it in the end, but would love some community input.

Author Topic: [GB][CLOSED] LeandreN Round 4, 60% kits, HHKB and winkeyless plates (Read 285939 times)