Author Topic: [GB]EXENT - 65% made by TARO (In production)  (Read 402841 times)

0 Members and 4 Guests are viewing this topic.

Offline Marvellion

  • Posts: 118
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #800 on: Wed, 05 July 2017, 19:13:19 »
Will parts produced by the factory get QC before shipping? X60's issues seem quite sad, it would suck if the same thing happened with the Exent since our factory is new too. ( If I'm wrong about this ignore this part)

Offline PancakeMSTR

  • Posts: 471
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #801 on: Wed, 05 July 2017, 22:22:42 »
Will parts produced by the factory get QC before shipping? X60's issues seem quite sad, it would suck if the same thing happened with the Exent since our factory is new too. ( If I'm wrong about this ignore this part)

Naw I think that's a reasonable concern. Would be interested in hearing what Juanhenza has to say on the matter.
   

Offline dead_pixel_design

  • Posts: 622
  • Location: Portland, OR
  • IIIV is not a Roman Numeral. Positive Vibes.
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #802 on: Wed, 05 July 2017, 23:57:24 »
Will parts produced by the factory get QC before shipping? X60's issues seem quite sad, it would suck if the same thing happened with the Exent since our factory is new too. ( If I'm wrong about this ignore this part)

Naw I think that's a reasonable concern. Would be interested in hearing what Juanhenza has to say on the matter.

What key set do you have planned for Exent in your pixel signature?

Offline PancakeMSTR

  • Posts: 471
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #803 on: Thu, 06 July 2017, 01:01:58 »
Will parts produced by the factory get QC before shipping? X60's issues seem quite sad, it would suck if the same thing happened with the Exent since our factory is new too. ( If I'm wrong about this ignore this part)

Naw I think that's a reasonable concern. Would be interested in hearing what Juanhenza has to say on the matter.

What key set do you have planned for Exent in your pixel signature?

Maxkey SA Ashen.
   

Offline MaNiFeX

  • Posts: 685
  • Location: Portland, OR
  • Wu Tang Killa Keebs
    • MaNiFeX.net
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #804 on: Thu, 06 July 2017, 11:42:06 »
Will parts produced by the factory get QC before shipping? X60's issues seem quite sad, it would suck if the same thing happened with the Exent since our factory is new too. ( If I'm wrong about this ignore this part)

Shhhhhhhhh.  The gods will hear you.   >:D

Offline Marvellion

  • Posts: 118
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #805 on: Thu, 06 July 2017, 16:50:43 »
Will parts produced by the factory get QC before shipping? X60's issues seem quite sad, it would suck if the same thing happened with the Exent since our factory is new too. ( If I'm wrong about this ignore this part)

Shhhhhhhhh.  The gods will hear you.   >:D
Oh sh..., It was a bait for the unfaithful, I swear.

Offline MaNiFeX

  • Posts: 685
  • Location: Portland, OR
  • Wu Tang Killa Keebs
    • MaNiFeX.net
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #806 on: Fri, 07 July 2017, 10:40:28 »
Will parts produced by the factory get QC before shipping? X60's issues seem quite sad, it would suck if the same thing happened with the Exent since our factory is new too. ( If I'm wrong about this ignore this part)

Shhhhhhhhh.  The gods will hear you.   >:D
Oh sh..., It was a bait for the unfaithful, I swear.

I bet they weren't listening anyway.  They drink too much.

Looking forward to seeing the ano job regardless.  I'm stoked for some bezel.  GET HYPE.  :eek:

Offline juahenza

  • Thread Starter
  • Posts: 476
  • DoSmallThingswithGreatLove
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #807 on: Mon, 10 July 2017, 22:21:16 »
Will parts produced by the factory get QC before shipping? X60's issues seem quite sad, it would suck if the same thing happened with the Exent since our factory is new too. ( If I'm wrong about this ignore this part)

Naw I think that's a reasonable concern. Would be interested in hearing what Juanhenza has to say on the matter.
YES, QC will be done prior to shipping. Plus we will have quite a bit of extra, in case of anything.
How are you guys doing?
456GT | TGR Jane CE | Dolphin v2 | Whale | 360c | LZ FE | LZ IRON | TX-CP | Varmilo VA87M | HHKB P2 | IBM SSK P.1397681| IBM Industrial SSK P.1395682 | VE.A | Realforce 87u | Datamancer Streamline TKL | Datamancer Mechinist TKL | TANK v1 | RAMA M-4 | Realforce 108UW-HIPRO

Offline Vigrith

  • Posts: 1648
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #808 on: Mon, 10 July 2017, 22:36:54 »
How are you guys doing?

Well, you know, using a framed printed picture of the black Exent prototype to cry myself to sleep at night until it arrives.

Offline PancakeMSTR

  • Posts: 471
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #809 on: Mon, 10 July 2017, 22:43:36 »
How are you guys doing?

Well, you know, using a framed printed picture of the black Exent prototype to cry myself to sleep at night until it arrives.

Yeah that pretty much sums it up. Except my framed photo is of the silver version.
   

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1189
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #810 on: Tue, 11 July 2017, 00:53:24 »
Will parts produced by the factory get QC before shipping? X60's issues seem quite sad, it would suck if the same thing happened with the Exent since our factory is new too. ( If I'm wrong about this ignore this part)

Naw I think that's a reasonable concern. Would be interested in hearing what Juanhenza has to say on the matter.
YES, QC will be done prior to shipping. Plus we will have quite a bit of extra, in case of anything.
How are you guys doing?

Are there extras in all the colors? I'm totally think I may have to try and buy more than one lol. The more I look at the renders the more I need this keyboard

Offline Marvellion

  • Posts: 118
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #811 on: Tue, 11 July 2017, 03:18:02 »
Will parts produced by the factory get QC before shipping? X60's issues seem quite sad, it would suck if the same thing happened with the Exent since our factory is new too. ( If I'm wrong about this ignore this part)
YES, QC will be done prior to shipping. Plus we will have quite a bit of extra, in case of anything.
How are you guys doing?

Thanks juahenza, all good here, how are you? I might actually be happy with the delay since I won't have to solder in this summer heat :D

Offline Asbrodeus

  • Posts: 82
  • Location: South Florida
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #812 on: Tue, 11 July 2017, 06:18:11 »
YES, QC will be done prior to shipping. Plus we will have quite a bit of extra, in case of anything.
...

Would it be possible to add an extra color case to the order in that... case?

Offline DreLLin

  • Posts: 156
  • Location: Germany
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #813 on: Tue, 11 July 2017, 06:59:57 »
Will parts produced by the factory get QC before shipping? X60's issues seem quite sad, it would suck if the same thing happened with the Exent since our factory is new too. ( If I'm wrong about this ignore this part)

Naw I think that's a reasonable concern. Would be interested in hearing what Juanhenza has to say on the matter.
YES, QC will be done prior to shipping. Plus we will have quite a bit of extra, in case of anything.
How are you guys doing?

If you have such an amount of extras is it possible to change the color or buy an extra case?

Offline Gettys

  • Posts: 57
  • Location: SC
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #814 on: Tue, 11 July 2017, 11:24:22 »
Will parts produced by the factory get QC before shipping? X60's issues seem quite sad, it would suck if the same thing happened with the Exent since our factory is new too. ( If I'm wrong about this ignore this part)

Naw I think that's a reasonable concern. Would be interested in hearing what Juanhenza has to say on the matter.
YES, QC will be done prior to shipping. Plus we will have quite a bit of extra, in case of anything.
How are you guys doing?

If you have such an amount of extras is it possible to change the color or buy an extra case?

I am interested in this as well.  In other news, I had to laminate my printed out picture of my extent because tears kept ruining it.  Hope all is wells with you guys.

Offline MaNiFeX

  • Posts: 685
  • Location: Portland, OR
  • Wu Tang Killa Keebs
    • MaNiFeX.net
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #815 on: Tue, 11 July 2017, 11:35:19 »
Will parts produced by the factory get QC before shipping? X60's issues seem quite sad, it would suck if the same thing happened with the Exent since our factory is new too. ( If I'm wrong about this ignore this part)

Naw I think that's a reasonable concern. Would be interested in hearing what Juanhenza has to say on the matter.
YES, QC will be done prior to shipping. Plus we will have quite a bit of extra, in case of anything.
How are you guys doing?

If you have such an amount of extras is it possible to change the color or buy an extra case?

I am interested in this as well.  In other news, I had to laminate my printed out picture of my extent because tears kept ruining it.  Hope all is wells with you guys.

I bought a black case...  Had Terminal waiting for it, then saw that the MOD switches I bought for it are Cyan...  might change my keyset to Pulse or something to match.  What to do, what to do?!?  Good thing I have a little time.  Can't wait!  Thanks to the dudes at TARO.

Offline juahenza

  • Thread Starter
  • Posts: 476
  • DoSmallThingswithGreatLove
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #816 on: Tue, 11 July 2017, 23:04:33 »
YES, QC will be done prior to shipping. Plus we will have quite a bit of extra, in case of anything.
...

Would it be possible to add an extra color case to the order in that... case?
Possible. We can talk about that later.  :thumb:
456GT | TGR Jane CE | Dolphin v2 | Whale | 360c | LZ FE | LZ IRON | TX-CP | Varmilo VA87M | HHKB P2 | IBM SSK P.1397681| IBM Industrial SSK P.1395682 | VE.A | Realforce 87u | Datamancer Streamline TKL | Datamancer Mechinist TKL | TANK v1 | RAMA M-4 | Realforce 108UW-HIPRO

Offline pvd

  • Posts: 81
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #817 on: Wed, 12 July 2017, 05:25:09 »
Will any of these extras be put up for sale at the conclusion of the GB?  :thumb:

I think this board is very attractive. Sad I wasn't around to join it in january.

Offline Marvellion

  • Posts: 118
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #818 on: Wed, 12 July 2017, 09:30:10 »
Will any of these extras be put up for sale at the conclusion of the GB?  :thumb:

I think this board is very attractive. Sad I wasn't around to join it in january.
I'm quite sure you should be able to snag one when extras come.

Sent from my HTC One_M8 using Tapatalk


Offline juahenza

  • Thread Starter
  • Posts: 476
  • DoSmallThingswithGreatLove
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #819 on: Wed, 12 July 2017, 21:34:31 »
Will any of these extras be put up for sale at the conclusion of the GB?  :thumb:

I think this board is very attractive. Sad I wasn't around to join it in january.
Yeah I wouldn't want to keep the extras. They will be up for sale when this GB is concluded.
456GT | TGR Jane CE | Dolphin v2 | Whale | 360c | LZ FE | LZ IRON | TX-CP | Varmilo VA87M | HHKB P2 | IBM SSK P.1397681| IBM Industrial SSK P.1395682 | VE.A | Realforce 87u | Datamancer Streamline TKL | Datamancer Mechinist TKL | TANK v1 | RAMA M-4 | Realforce 108UW-HIPRO

Offline alexfry

  • Posts: 20
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #820 on: Fri, 14 July 2017, 05:30:24 »
Pretty keen to see some more update photos...

Aluminum being milled?
Parts being polished?
Feet in Sandles?

Offline zhihuichan

  • Posts: 136
  • Click,click,click
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #821 on: Tue, 18 July 2017, 22:05:22 »
Any updates about the bottom?

Offline Cerasis

  • Posts: 114
  • Location: Philippines
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #822 on: Sat, 22 July 2017, 07:40:45 »
Any updates about the bottom?

I'd like to see some update pictures if there are any  :D
Bantam44 | M0116 | Miuni32 | EXENT | Un-novatouch'd Novatouch to be fixed

Offline juahenza

  • Thread Starter
  • Posts: 476
  • DoSmallThingswithGreatLove
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #823 on: Sun, 23 July 2017, 10:24:05 »
Just some quick updates before I off to bed. The factory has already started working on the polycarbonate bottom, they will send me some progress pic later. We should be expecting some of the anodized parts this week, I will post the photos as soon as I received them.

Thank you  ;D
456GT | TGR Jane CE | Dolphin v2 | Whale | 360c | LZ FE | LZ IRON | TX-CP | Varmilo VA87M | HHKB P2 | IBM SSK P.1397681| IBM Industrial SSK P.1395682 | VE.A | Realforce 87u | Datamancer Streamline TKL | Datamancer Mechinist TKL | TANK v1 | RAMA M-4 | Realforce 108UW-HIPRO

Offline cynviloq

  • Posts: 300
  • Location: meh-kee
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #824 on: Sun, 23 July 2017, 12:08:51 »
Just some quick updates before I off to bed. The factory has already started working on the polycarbonate bottom, they will send me some progress pic later. We should be expecting some of the anodized parts this week, I will post the photos as soon as I received them.

Thank you  ;D

Given work is just starting on the bottoms, can we still expecting an August delivery?

Offline dead_pixel_design

  • Posts: 622
  • Location: Portland, OR
  • IIIV is not a Roman Numeral. Positive Vibes.
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #825 on: Sun, 23 July 2017, 16:15:59 »
Just some quick updates before I off to bed. The factory has already started working on the polycarbonate bottom, they will send me some progress pic later. We should be expecting some of the anodized parts this week, I will post the photos as soon as I received them.

Thank you  ;D

Excited for more pictures. Would rather have delays than any compromises on quality/finish

Offline dr_derivative

  • Posts: 287
  • Location: Cork, Ireland
  • Not a real doctor
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #826 on: Sun, 23 July 2017, 18:21:48 »
Just some quick updates before I off to bed. The factory has already started working on the polycarbonate bottom, they will send me some progress pic later. We should be expecting some of the anodized parts this week, I will post the photos as soon as I received them.

Thank you  ;D

Does that mean that those of us who opted for the anodised bottom as opposed to polycarbonate might get our Exents sooner?
GH/Reddit/DT: dr_derivative | Discord: dr_derivative#3618 | IG: dr_derivative_mk
MK Ireland Discord: https://discord.gg/2KdxJzR

Offline dead_pixel_design

  • Posts: 622
  • Location: Portland, OR
  • IIIV is not a Roman Numeral. Positive Vibes.
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #827 on: Sun, 23 July 2017, 19:33:58 »
Just some quick updates before I off to bed. The factory has already started working on the polycarbonate bottom, they will send me some progress pic later. We should be expecting some of the anodized parts this week, I will post the photos as soon as I received them.

Thank you  ;D

Does that mean that those of us who opted for the anodised bottom as opposed to polycarbonate might get our Exents sooner?

Or later?

Offline kingnestea

  • Posts: 369
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #828 on: Sun, 23 July 2017, 22:18:09 »
Is it possible to add a aluminum bottom case to my order?

Offline MaNiFeX

  • Posts: 685
  • Location: Portland, OR
  • Wu Tang Killa Keebs
    • MaNiFeX.net
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #829 on: Mon, 24 July 2017, 10:44:43 »
Met RAMA in Seattle over the weekend.  He said he saw his first EXENT in the bay area and that it looked dope in person.  Can't wait! 

THE HYPE IS REAL.

Offline eddible

  • Posts: 160
  • Location: United Kingdom
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #830 on: Mon, 24 July 2017, 11:31:49 »
Met RAMA in Seattle over the weekend.  He said he saw his first EXENT in the bay area and that it looked dope in person.  Can't wait! 

THE HYPE IS REAL.
That's exciting!

Offline merutz

  • Posts: 153
  • Location: Sibiu, RO
  • @merutz
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #831 on: Mon, 24 July 2017, 11:33:31 »
Looking forward to this week's photos  :eek:


QFR R-i/DSA Dolch   |   MX Master
     + yellow Esc

Offline zurikade

  • Posts: 66
  • Location: Toronto
  • Math Always Wins.
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #832 on: Mon, 24 July 2017, 11:36:43 »
Met RAMA in Seattle over the weekend.  He said he saw his first EXENT in the bay area and that it looked dope in person.  Can't wait! 

THE HYPE IS REAL.
That's excitingg!

Exent in the wild and our glorious leader is keeping it a secret? :O

Offline PancakeMSTR

  • Posts: 471
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #833 on: Mon, 24 July 2017, 13:04:48 »
Met RAMA in Seattle over the weekend.  He said he saw his first EXENT in the bay area and that it looked dope in person.  Can't wait! 

THE HYPE IS REAL.
That's excitingg!

Exent in the wild and our glorious leader is keeping it a secret? :O (Attachment Link)

It was in a video of the LA meetup posted on reddit. I'm reserving judgement until I see it in person, and in silver.
   

Offline juahenza

  • Thread Starter
  • Posts: 476
  • DoSmallThingswithGreatLove
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #834 on: Mon, 24 July 2017, 20:03:07 »
Just some quick updates before I off to bed. The factory has already started working on the polycarbonate bottom, they will send me some progress pic later. We should be expecting some of the anodized parts this week, I will post the photos as soon as I received them.

Thank you  ;D

Does that mean that those of us who opted for the anodised bottom as opposed to polycarbonate might get our Exents sooner?
Later. There isn't many who ordered the aluminum bottom. So the manufacturer will run it after the polycarbonate bottom.
456GT | TGR Jane CE | Dolphin v2 | Whale | 360c | LZ FE | LZ IRON | TX-CP | Varmilo VA87M | HHKB P2 | IBM SSK P.1397681| IBM Industrial SSK P.1395682 | VE.A | Realforce 87u | Datamancer Streamline TKL | Datamancer Mechinist TKL | TANK v1 | RAMA M-4 | Realforce 108UW-HIPRO

Offline dr_derivative

  • Posts: 287
  • Location: Cork, Ireland
  • Not a real doctor
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #835 on: Tue, 25 July 2017, 07:34:35 »
Just some quick updates before I off to bed. The factory has already started working on the polycarbonate bottom, they will send me some progress pic later. We should be expecting some of the anodized parts this week, I will post the photos as soon as I received them.

Thank you  ;D

Does that mean that those of us who opted for the anodised bottom as opposed to polycarbonate might get our Exents sooner?
Later. There isn't many who ordered the aluminum bottom. So the manufacturer will run it after the polycarbonate bottom.

Ah, I thought all anodised parts would be done together. That makes sense. I can't wait for mine ;D
GH/Reddit/DT: dr_derivative | Discord: dr_derivative#3618 | IG: dr_derivative_mk
MK Ireland Discord: https://discord.gg/2KdxJzR

Offline MaNiFeX

  • Posts: 685
  • Location: Portland, OR
  • Wu Tang Killa Keebs
    • MaNiFeX.net
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #836 on: Tue, 25 July 2017, 21:57:53 »
Just some quick updates before I off to bed. The factory has already started working on the polycarbonate bottom, they will send me some progress pic later. We should be expecting some of the anodized parts this week, I will post the photos as soon as I received them.

Thank you  ;D

Does that mean that those of us who opted for the anodised bottom as opposed to polycarbonate might get our Exents sooner?
Later. There isn't many who ordered the aluminum bottom. So the manufacturer will run it after the polycarbonate bottom.

This makes me both very happy and a bit sad at the same time... What's a little wait?  I'm just very happy!  Woohoo!

Offline Vigrith

  • Posts: 1648
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #837 on: Wed, 26 July 2017, 12:18:21 »
Who should I contact in order to have my delivery address changed?

Offline RocketGruntJake

  • Posts: 125
  • Brb, gotta grow some flowers
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #838 on: Wed, 26 July 2017, 15:35:03 »
Who should I contact in order to have my delivery address changed?

Need to do this as well

Offline MythicalWagyu

  • * Exquisite Elder
  • Posts: 921
  • Location: The Metaverse
  • Poor Impulse Control
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #839 on: Wed, 26 July 2017, 17:38:29 »
Who should I contact in order to have my delivery address changed?

Need to do this as well

I PM'd juahenza to change my shipping address.
KEYBOARDS >>
More
More
OG Blackwidow | Rosewill RK-9000BRI | QuickFire Rapid | Choc Mini | Apple M0110 (soon) | Leopold FC660C | 60% Pure | Poker II | Keycool 22
MICE >>
More
Logitech G5 | Corsair M65 | Logitech G400
COMPUTER >>
More
i5-3570K @ 4.2GHz, 12GB DDR3, 2GB GTX 670, 64GB SSD, ~4TB HDD, 2x Dell S2240M IPS, Corsair HX650 80 Plus Silver, Win7 Ultimate
  [WTS/WTB/WTT]  Heatware evaluation

too busy being on aol chatrooms/yahoo chatrooms acting like a lesbian with other guys pretending to be lesbians.

Offline Vigrith

  • Posts: 1648
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #840 on: Wed, 26 July 2017, 23:15:50 »
I PM'd juahenza to change my shipping address.

Thank you for confirming that! Yea PM'd him a few days ago, he's probably been busy hence I figured there may be a good chance at reaching out if I bump the thread instead.

Offline Gdubb90

  • Posts: 41
  • Location: [US-GA]
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #841 on: Thu, 27 July 2017, 11:29:15 »
Who should I contact in order to have my delivery address changed?

Need to do this as well

I PM'd juahenza to change my shipping address.

I did the same. Then I was told to send an email to the address listed on the PayPal order and that is where I got mine changed.
  ///    /// 

Offline Marvellion

  • Posts: 118
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #842 on: Sat, 29 July 2017, 18:37:30 »
Is there any chance for a Alps plate? There is an EXENT compatible (I believe) Alps %65 PCB available already, it would be awesome if someone could design a compatible plate too. Going between Cherry and Alps easily with just changing the plate/PCBs sounds nice.

Offline Pwner

  • * Maker
  • Posts: 556
  • Location: NY
  • soon™
    • Ion Keyboards
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #843 on: Sun, 30 July 2017, 00:36:03 »
Is there any chance for a Alps plate? There is an EXENT compatible (I believe) Alps %65 PCB available already, it would be awesome if someone could design a compatible plate too. Going between Cherry and Alps easily with just changing the plate/PCBs sounds nice.

I asked about a plate file back in the IC phase but never really got a reply that I remember.  In any case, I planned on reverse engineering it and getting a couple other plates made myself.  Issue with that is I don't want to sell anything without proper permission.

Offline Marvellion

  • Posts: 118
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #844 on: Sun, 30 July 2017, 04:25:11 »
Is there any chance for a Alps plate? There is an EXENT compatible (I believe) Alps %65 PCB available already, it would be awesome if someone could design a compatible plate too. Going between Cherry and Alps easily with just changing the plate/PCBs sounds nice.

I asked about a plate file back in the IC phase but never really got a reply that I remember.  In any case, I planned on reverse engineering it and getting a couple other plates made myself.  Issue with that is I don't want to sell anything without proper permission.
I would definitely get one. Juahuenza will answer hopefully.

Sent from my HTC One_M8 using Tapatalk


Offline duynguyenle

  • Posts: 1384
  • Location: UK - Midlands
  • Personal text? What personal text???
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #845 on: Sun, 30 July 2017, 07:48:25 »
Is there any chance for a Alps plate? There is an EXENT compatible (I believe) Alps %65 PCB available already, it would be awesome if someone could design a compatible plate too. Going between Cherry and Alps easily with just changing the plate/PCBs sounds nice.

What Alps 65% PCB has a centre USB port? A Korean custom one?
| QFR            | Leeku 1800    | Raptor K1      | Dolch Pac

Offline Marvellion

  • Posts: 118
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #846 on: Sun, 30 July 2017, 09:56:34 »
Is there any chance for a Alps plate? There is an EXENT compatible (I believe) Alps %65 PCB available already, it would be awesome if someone could design a compatible plate too. Going between Cherry and Alps easily with just changing the plate/PCBs sounds nice.

What Alps 65% PCB has a centre USB port? A Korean custom one?
Dang it, I forgot about that, lfk78 had some %65 Alps PCB, but its not a centre port as you've guessed.

Sent from my HTC One_M8 using Tapatalk


Offline yuktsi

  • * Maker
  • Posts: 1147
  • Location: Malaysia
  • Colour my life with the chaos of trouble
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #847 on: Sun, 30 July 2017, 10:11:12 »
Is there any chance for a Alps plate? There is an EXENT compatible (I believe) Alps %65 PCB available already, it would be awesome if someone could design a compatible plate too. Going between Cherry and Alps easily with just changing the plate/PCBs sounds nice.

I asked about a plate file back in the IC phase but never really got a reply that I remember.  In any case, I planned on reverse engineering it and getting a couple other plates made myself.  Issue with that is I don't want to sell anything without proper permission.
I can send you the plate and PCB layout file. Just PM your email.
email: yuktsi@ttggrr.cc

My collection

More
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 10xv1.0 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo2 | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1 | 356mini | 356pad | Matrix 8xv2.0 | 420cl | Matrix 8xv1.0 | Whale Special | Poly Dolphin | Keycult No.2 | FMJ80 | Singa R2 | Whale Poly | 356cl | HBCP | Dolinger | Linger

Offline duynguyenle

  • Posts: 1384
  • Location: UK - Midlands
  • Personal text? What personal text???
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #848 on: Sun, 30 July 2017, 11:09:18 »
Is there any chance for a Alps plate? There is an EXENT compatible (I believe) Alps %65 PCB available already, it would be awesome if someone could design a compatible plate too. Going between Cherry and Alps easily with just changing the plate/PCBs sounds nice.

What Alps 65% PCB has a centre USB port? A Korean custom one?
Dang it, I forgot about that, lfk78 had some %65 Alps PCB, but its not a centre port as you've guessed.

Sent from my HTC One_M8 using Tapatalk

You're also forgetting that the LFK follows Varmilo's interpretation of the 65% form factor, with two additional rows that is spaced away from the main alpha cluster. I don't think you really thought your plans through...
| QFR            | Leeku 1800    | Raptor K1      | Dolch Pac

Offline Marvellion

  • Posts: 118
Re: [GB]EXENT - 65% made by TARO (In production)
« Reply #849 on: Sun, 30 July 2017, 13:21:51 »
Is there any chance for a Alps plate? There is an EXENT compatible (I believe) Alps %65 PCB available already, it would be awesome if someone could design a compatible plate too. Going between Cherry and Alps easily with just changing the plate/PCBs sounds nice.

What Alps 65% PCB has a centre USB port? A Korean custom one?
Dang it, I forgot about that, lfk78 had some %65 Alps PCB, but its not a centre port as you've guessed.

Sent from my HTC One_M8 using Tapatalk

You're also forgetting that the LFK follows Varmilo's interpretation of the 65% form factor, with two additional rows that is spaced away from the main alpha cluster. I don't think you really thought your plans through...

There's also a standart %65 layout PCB like EXENT's.