Author Topic: [GB] MIRA SE - Custom 80% Keyboard (Closed for orders. Manufacturing phase.)  (Read 110720 times)

0 Members and 1 Guest are viewing this topic.

Offline megaforce93

  • Posts: 469
  • Location: Tucson, AZ
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #150 on: Wed, 01 February 2017, 18:49:59 »

Offline techmattr

  • Posts: 145
  • Location: Pittsburgh, PA
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #151 on: Wed, 01 February 2017, 19:12:12 »
  • Is there a limit to how many each person can buy?
  • How do we buy more than one?
  • Can the first 57 have the engraving on more than one?
Logic would suggest:
  • No.
  • 1 form = 1 keyboard, submit more forms.
  • What's the point of having two (for example) 3/57s? Of course you can't.
I doubt the answer you'd receive from anyone else would be different; I'll be very surprised if they are.

Thanks. I guess I was looking at the # question as having more than one weight so you could have one brass and one ss. But yeah I guess that doesn't really make sense in the overall scheme.

Offline Photoelectric

  • * Administrator
  • Posts: 6062
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #152 on: Wed, 01 February 2017, 19:20:34 »
Is there a limit to how many each person can buy?
How do we buy more than one?
Can the first 57 have the engraving on more than one?

1. I don't think there's a limit, within reason.  If you're looking to get like 10, ask ninja directly.
2. submit the order form more than once.
3. No, you only get one numbered weight period (your primary selected weight), even if you order extra weights.

Offline Vala

  • Posts: 65
  • Location: Portland, OR
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #153 on: Wed, 01 February 2017, 19:55:59 »
Does the PCB support n-key rollover? It's a necessity for my rhythm games  :)

b.face X2 w/ 65g Zealios (main board) | Skull Squadron DSA | GMK Hyperfuse | Jukebox SA | DSA Dolch | Hana DSA

Offline E3E

  • Posts: 2779
  • Location: New Orleans
  • Alps Evangelist
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #154 on: Wed, 01 February 2017, 20:30:22 »
Does the PCB support n-key rollover? It's a necessity for my rhythm games  :)

The PCB supports 6KRO over USB.

Offline Baddy126

  • Posts: 100
  • Location: Toronto
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #155 on: Wed, 01 February 2017, 22:01:54 »
Will the blue version get the "Mira SE" engraved on the back?
Yes.

hell yeah

Anyone for a render or pic of how it looks?

Offline loud_asian

  • Posts: 490
  • ayylmao
keyboards are lame

Offline iArson

  • Posts: 371
  • Location: United States
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #157 on: Wed, 01 February 2017, 22:09:57 »
Will the blue version get the "Mira SE" engraved on the back?
Yes.
Is only he blue getting an engraving?


Sent from my iPhone using Tapatalk

Offline Baddy126

  • Posts: 100
  • Location: Toronto

Offline Photoelectric

  • * Administrator
  • Posts: 6062
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #159 on: Wed, 01 February 2017, 22:34:04 »
Will the blue version get the "Mira SE" engraved on the back?
Yes.
Is only he blue getting an engraving?


Sent from my iPhone using Tapatalk

Why would you think that :)

Offline iArson

  • Posts: 371
  • Location: United States
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #160 on: Wed, 01 February 2017, 22:43:04 »
Will the blue version get the "Mira SE" engraved on the back?
Yes.
Is only he blue getting an engraving?


Sent from my iPhone using Tapatalk

Why would you think that :)
:thumb:


Sent from my iPhone using Tapatalk

Offline Baddy126

  • Posts: 100
  • Location: Toronto
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #161 on: Thu, 02 February 2017, 10:27:56 »
Does the lunar grey have the option to not get diffuser as shown in the pictures?

Also, any word on lowering the amount for customs?


Offline Photoelectric

  • * Administrator
  • Posts: 6062
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #162 on: Thu, 02 February 2017, 10:42:43 »
The diffuser is part of the MIRA SE case design, the aluminum is cut to include it, so if you don't insert the diffuser, there'll be a gap in the case.

Offline ninjadoc

  • Thread Starter
  • Posts: 515
  • Location: Cincinnati, OH
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #163 on: Thu, 02 February 2017, 14:16:49 »
Does the lunar grey have the option to not get diffuser as shown in the pictures?

Also, any word on lowering the amount for customs?



The grey board is from the Chinese Group Buy. Once the manufacturer returns from celebrating the Chines New Year I will ask about either an aluminum or stainless spacer.

Offline iArson

  • Posts: 371
  • Location: United States
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #164 on: Thu, 02 February 2017, 14:19:21 »
Does the lunar grey have the option to not get diffuser as shown in the pictures?

Also, any word on lowering the amount for customs?



The grey board is from the Chinese Group Buy. Once the manufacturer returns from celebrating the Chines New Year I will ask about either an aluminum or stainless spacer.
Awesome thanks. With that being said would be be able to buy both an acrylic and aluminum spacer if it's available?


Sent from my iPhone using Tapatalk

Offline roostrc0gburn

  • Posts: 1083
  • Location: Oregon
  • its just plastic
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #165 on: Thu, 02 February 2017, 15:05:34 »
Does the lunar grey have the option to not get diffuser as shown in the pictures?

Also, any word on lowering the amount for customs?



The grey board is from the Chinese Group Buy. Once the manufacturer returns from celebrating the Chines New Year I will ask about either an aluminum or stainless spacer.
Awesome thanks. With that being said would be be able to buy both an acrylic and aluminum spacer if it's available?



I would love to buy an acrylic diffuser and a stainless steel spacer. that would be awesome if the manufacturer can do it!

Offline Baddy126

  • Posts: 100
  • Location: Toronto
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #166 on: Thu, 02 February 2017, 15:24:49 »
Does the lunar grey have the option to not get diffuser as shown in the pictures?

Also, any word on lowering the amount for customs?



The grey board is from the Chinese Group Buy. Once the manufacturer returns from celebrating the Chines New Year I will ask about either an aluminum or stainless spacer.
Awesome thanks. With that being said would be be able to buy both an acrylic and aluminum spacer if it's available?



I would love to buy an acrylic diffuser and a stainless steel spacer. that would be awesome if the manufacturer can do it!

+3

Offline Vala

  • Posts: 65
  • Location: Portland, OR
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #167 on: Thu, 02 February 2017, 15:32:46 »
Does the PCB support n-key rollover? It's a necessity for my rhythm games  :)

The PCB supports 6KRO over USB.

Oh crap, is there any way to get around that? I've heard about PS/2, but not sure about the logistics of using it.

b.face X2 w/ 65g Zealios (main board) | Skull Squadron DSA | GMK Hyperfuse | Jukebox SA | DSA Dolch | Hana DSA

Offline E3E

  • Posts: 2779
  • Location: New Orleans
  • Alps Evangelist
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #168 on: Thu, 02 February 2017, 15:49:32 »
Oh crap, is there any way to get around that? I've heard about PS/2, but not sure about the logistics of using it.

I've heard of this too, but I'm actually not sure how it works on many of the modern PCBs as almost everyone uses USB. Only a few PCBs support NKRO over USB, despite supporting it in the matrix.

I heard a while back that converting it to PS2 and then back to USB can do it, but that sounds kind of sketchy and dubious.

Offline Sissy

  • Posts: 308
  • Location: Australia
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #169 on: Thu, 02 February 2017, 18:42:39 »
I'm still kinda new to this whole soldering and buying parts thing. just wondering what LED do I need for switches and best site to buy them from.

Offline Photoelectric

  • * Administrator
  • Posts: 6062
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #170 on: Thu, 02 February 2017, 18:47:56 »
Here's a thread with some LED photos:
https://geekhack.org/index.php?topic=54702.0

Generally used are 2x3x4 rectangular LEDs and 1.8mm small LEDs (down the first page for photos and description).  Either of those work.

I believe most get them from eBay (or Aliexpress).

Offline alienman82

  • * Elevated Elder
  • Posts: 4013
    • Youtube - Alienman82
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #171 on: Thu, 02 February 2017, 19:48:47 »
just get 1,8mm.  the 234 size isn't compatible with all caps.

Offline arid_tare

  • Posts: 4
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #172 on: Thu, 02 February 2017, 20:07:30 »
just get 1,8mm.  the 234 size isn't compatible with all caps.
I believe 2x3x4 LEDs interfere with row 3 of cherry profile, in particular.

Offline Photoelectric

  • * Administrator
  • Posts: 6062
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #173 on: Thu, 02 February 2017, 21:15:17 »
I use 2x3x4 and exclusively vintage Cherry and new GMK caps--no interference that I've noticed.

Offline alienman82

  • * Elevated Elder
  • Posts: 4013
    • Youtube - Alienman82
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #174 on: Thu, 02 February 2017, 21:18:33 »
I use 2x3x4 and exclusively vintage Cherry and new GMK caps--no interference that I've noticed.

They got stuck on OG Dolch for me.  Really not worth the $10 savings compared to 1.8mm.  Maybe if you want some special color, but just play with the RGB underglow.

Offline Photoelectric

  • * Administrator
  • Posts: 6062
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #175 on: Thu, 02 February 2017, 21:26:20 »
I have and  used OG Dolch caps too without issues with rectangular LEDs.  Have you made sure the LEDs are fitted neatly and pushed all the way in?  (All of my LEDs are in SIP sockets anyway).

Offline alienman82

  • * Elevated Elder
  • Posts: 4013
    • Youtube - Alienman82
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #176 on: Thu, 02 February 2017, 21:33:30 »
I have and  used OG Dolch caps too without issues with rectangular LEDs.  Have you made sure the LEDs are fitted neatly and pushed all the way in?  (All of my LEDs are in SIP sockets anyway).

maybe they weren't I've since sold that board.  1.8mm is just problem free and looks nicer.

Offline riotonthebay

  • Cherry Peasant
  • * Destiny Supporter
  • Posts: 2005
  • Location: Raleigh
  • Cherry Pheasant
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #177 on: Thu, 02 February 2017, 21:38:08 »
I've had issues with gmk and original dyesubs rubbing against 2x3x4.

Offline E3E

  • Posts: 2779
  • Location: New Orleans
  • Alps Evangelist
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #178 on: Fri, 03 February 2017, 08:16:58 »
Yeah, I'd recommend 1.8mm LEDs for the most hassle-free experience when it comes to issues you might run into with cap clearance.

Offline rotciveel

  • Posts: 129
  • Location: Houston, TX
  • Fugu Curator Extraordinaire
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #179 on: Fri, 03 February 2017, 08:19:26 »
Is this interstellar black with stainless steel weight?


Offline E3E

  • Posts: 2779
  • Location: New Orleans
  • Alps Evangelist
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #180 on: Fri, 03 February 2017, 08:32:31 »
Is this interstellar black with stainless steel weight?

Show Image


That looks like brass to me.

Offline limitz

  • Posts: 452
  • Location: ATL
  • "the old gods stir and will not let me sleep..."
    • Liquid-Ion Hydroponics
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #181 on: Fri, 03 February 2017, 08:34:04 »
before I order,

Who all are the reputable US based keyboard assemblers?
Need a bonafide, trustworthy person.
Trying to avoid another TheChemist disappearing with $800+ of my gear.

Thanks

Ninjadoc and I were talking about this a few nights ago. He'll finalize the assembler list soon.

Whoever it will be though, the goal is to keep things consistent. IE: all assemblers using the same solder - I advocate for Kester 44 - ultimately it's ninjadoc's call though.
« Last Edit: Fri, 03 February 2017, 08:35:51 by limitz »
Mmm... machined aluminum

Offline doclong

  • Posts: 3
  • Location: Viet Nam
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #182 on: Fri, 03 February 2017, 08:39:32 »
_Will you commit to quality?
_Do you have QA to check product before packaging and shipping?

Offline Rafa_n

  • Posts: 93
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #183 on: Fri, 03 February 2017, 10:41:57 »
I haven't been following the threads too much, but just want to make sure if I can assemble the keyboard WITHOUT the acrylic diffurer.

I'm almost sure it can but just wanted a 100% confirmation  ;)

Offline limitz

  • Posts: 452
  • Location: ATL
  • "the old gods stir and will not let me sleep..."
    • Liquid-Ion Hydroponics
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #184 on: Fri, 03 February 2017, 10:44:45 »
I haven't been following the threads too much, but just want to make sure if I can assemble the keyboard WITHOUT the acrylic diffurer.

I'm almost sure it can but just wanted a 100% confirmation  ;)

This is not possible. The diffuser/bottom half was made to be integral.
Mmm... machined aluminum

Offline Photoelectric

  • * Administrator
  • Posts: 6062
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #185 on: Fri, 03 February 2017, 10:45:03 »
I've had issues with gmk and original dyesubs rubbing against 2x3x4.

Hmm, strange that I haven't had the same issues.  In any event, 1.8mm LEDs seem like a good idea... if they come in colors one wants.  I only see them in fairly standard colors, unfortunately.  I have a few different 2x3x4 cyans and interesting warm pink ones that I love.  But for standard colors, 1.8mm is the way to go now, especially if they fit switches with SIP sockets without falling out easily (I like how 2x3x4 fit tightly into the bottom stem mold).


I haven't been following the threads too much, but just want to make sure if I can assemble the keyboard WITHOUT the acrylic diffurer.

I'm almost sure it can but just wanted a 100% confirmation  ;)

The diffuser is part of the MIRA SE case design, the aluminum is cut to include it, so if you don't insert the diffuser, there'll be a gap in the case.
« Last Edit: Fri, 03 February 2017, 10:49:04 by Photoelectric »

Offline E3E

  • Posts: 2779
  • Location: New Orleans
  • Alps Evangelist
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #186 on: Fri, 03 February 2017, 10:58:16 »
Hmm, strange that I haven't had the same issues.  In any event, 1.8mm LEDs seem like a good idea... if they come in colors one wants.  I only see them in fairly standard colors, unfortunately.  I have a few different 2x3x4 cyans and interesting warm pink ones that I love.  But for standard colors, 1.8mm is the way to go now, especially if they fit switches with SIP sockets without falling out easily (I like how 2x3x4 fit tightly into the bottom stem mold).

http://www.ebay.com/itm/10Lights-200PCS-1-8mm-Water-Clear-LED-Diodes-White-Red-Orange-Purple-Mix-Kits-/121785459094?hash=item1c5afaa196:g:HBcAAOSw8-tWV-vM

They come in a pretty nice selection. In my experience, they also fit flush and snug in SIP sockets and the LED recesses for Cherry switches. I myself bought quite a few 2x3x4mm varieties and encountered the clearance issues described with Gateron PBT blanks, doubleshot OG Cherry caps, and OG Dyesubs.


Offline ninjadoc

  • Thread Starter
  • Posts: 515
  • Location: Cincinnati, OH
updates
« Reply #187 on: Fri, 03 February 2017, 13:06:13 »
There are updates on shipping and quality check procedure in the second post

Offline limitz

  • Posts: 452
  • Location: ATL
  • "the old gods stir and will not let me sleep..."
    • Liquid-Ion Hydroponics
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #188 on: Fri, 03 February 2017, 15:54:25 »
Changing to a new number

Number 57/57 is up for grabs

Will not be FCFS. PM me please.

Edit: Gone to Xondat.
« Last Edit: Sat, 04 February 2017, 13:09:39 by limitz »
Mmm... machined aluminum

Offline alienman82

  • * Elevated Elder
  • Posts: 4013
    • Youtube - Alienman82
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #189 on: Fri, 03 February 2017, 17:15:10 »
is 57 some special number for the Mira? Or just a cutoff?

Offline E3E

  • Posts: 2779
  • Location: New Orleans
  • Alps Evangelist
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #190 on: Fri, 03 February 2017, 17:27:19 »
is 57 some special number for the Mira? Or just a cutoff?

Dr.HubbleAWOL probably knows the answer.

Offline roostrc0gburn

  • Posts: 1083
  • Location: Oregon
  • its just plastic
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #191 on: Fri, 03 February 2017, 17:30:42 »
is 57 some special number for the Mira? Or just a cutoff?

when hubbs started the project, NASA had been around (officially) 57 years. perhaps that means the number of engraved keyboards should be increased to 58?

check out the "Facts about the potential group buy" section from this post -
https://geekhack.org/index.php?topic=70149.msg1687506#msg1687506

Offline poolside

  • Posts: 568
  • Location: Lane #4
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #192 on: Fri, 03 February 2017, 17:44:02 »
Will the rectangular top side of the weight (engraved or not) be polished as well?

Any hints on what the engraving will look like? Just curious, as I am not in the first 57 list.

Offline asgeirtj

  • Posts: 500
  • Location: Iceland
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #193 on: Fri, 03 February 2017, 18:49:42 »
Is there a picture somewhere where I can see the board from the top?  I'm deciding on this one or the LZ CLS and I will buy the board which has the thinner bezels.  Is anyone here able to make a judgement on that?  I have the lz-rv and I think it has quite the fat bezels which is not my preference, it seems to me that the cls has the same width, probably something standard on all lz boards.

Kind of hard to see:




ps: could someone enlighten me why anyone would want to buy the steel weight if it is lighter and more expensive?  Just curious.
« Last Edit: Fri, 03 February 2017, 18:52:23 by asgeirtj »
Leopold FC900 w/ 67g Purple Zealios - Silver Duck Octagon w/ 62 Purple Zealios

Offline eksuen

  • Posts: 461
  • Location: Torgue Zone
  • Ambassador of explosions.
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #194 on: Fri, 03 February 2017, 18:54:07 »
ps: could someone enlighten me why anyone would want to buy the steel weight if it is lighter and more expensive?  Just curious.

They like the way it looks and they can afford it?

Offline MrRooks

  • * Destiny Supporter
  • Posts: 208
  • Location: The burbs
  • Always be knolling
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #195 on: Fri, 03 February 2017, 19:13:11 »
Is there a picture somewhere where I can see the board from the top?  I'm deciding on this one or the LZ CLS and I will buy the board which has the thinner bezels.  Is anyone here able to make a judgement on that?  I have the lz-rv and I think it has quite the fat bezels which is not my preference, it seems to me that the cls has the same width, probably something standard on all lz boards.

Kind of hard to see:

Show Image

Show Image


ps: could someone enlighten me why anyone would want to buy the steel weight if it is lighter and more expensive?  Just curious.

Check the IC thread linked in the first post. There are a bunch of good shots that should show you what you're looking for.  :thumb:

Offline loud_asian

  • Posts: 490
  • ayylmao
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #196 on: Fri, 03 February 2017, 19:15:32 »
Is there a picture somewhere where I can see the board from the top?  I'm deciding on this one or the LZ CLS and I will buy the board which has the thinner bezels.  Is anyone here able to make a judgement on that?  I have the lz-rv and I think it has quite the fat bezels which is not my preference, it seems to me that the cls has the same width, probably something standard on all lz boards.

Kind of hard to see:

Show Image

Show Image


ps: could someone enlighten me why anyone would want to buy the steel weight if it is lighter and more expensive?  Just curious.

Here's more pictures of the mira https://bbs.wstx.com/forum.php?mod=viewthread&tid=700766&page=1&extra=#pid8857629

I chose steel cause it looks better.

brass with the blue case looks ugly
keyboards are lame

Offline Rayoui

  • Posts: 260
  • Location: Portland, OR
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #197 on: Fri, 03 February 2017, 19:40:24 »
Is there a picture somewhere where I can see the board from the top?  I'm deciding on this one or the LZ CLS and I will buy the board which has the thinner bezels.  Is anyone here able to make a judgement on that?  I have the lz-rv and I think it has quite the fat bezels which is not my preference, it seems to me that the cls has the same width, probably something standard on all lz boards.

Kind of hard to see:

Show Image

Show Image


ps: could someone enlighten me why anyone would want to buy the steel weight if it is lighter and more expensive?  Just curious.

Here's more pictures of the mira https://bbs.wstx.com/forum.php?mod=viewthread&tid=700766&page=1&extra=#pid8857629

I chose steel cause it looks better.

brass with the blue case looks ugly
Show Image


Keep in mind the brass will look much different after it ages a bit.
Clueboard  |  B.face  |  HHKB Type-S  |  Realforce RGB  |  Pok3r
Soon: MIRA SE

Online nevaenuf

  • Posts: 31
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #198 on: Fri, 03 February 2017, 20:23:04 »
This is killin me guys. I've trying to pare down my collection and to stop buying expensive boards. But I love this board! :(
Let's talk about how cool it isn't and how I don't need it.

Let me know if you find an excuse. I'm trying to find one since the IC has started and failed miserably so far.

Don't find an excuse! :)
Please buy one!

Guys, this article describes me.  This board may be my last for a while.  I get so happy when a new board comes in that I get to customize.  I've got problems.
http://www.pcgamer.com/confessions-of-a-custom-mechanical-keyboard-obsessive/

Online beamingrobot

  • Posts: 271
Re: [GB] MIRA SE - Custom 80% Keyboard
« Reply #199 on: Fri, 03 February 2017, 20:48:10 »
Is there a picture somewhere where I can see the board from the top?  I'm deciding on this one or the LZ CLS and I will buy the board which has the thinner bezels.  Is anyone here able to make a judgement on that?  I have the lz-rv and I think it has quite the fat bezels which is not my preference, it seems to me that the cls has the same width, probably something standard on all lz boards.

Kind of hard to see:

Show Image

Show Image



ps: could someone enlighten me why anyone would want to buy the steel weight if it is lighter and more expensive?  Just curious.

Here's more pictures of the mira https://bbs.wstx.com/forum.php?mod=viewthread&tid=700766&page=1&extra=#pid8857629

I chose steel cause it looks better.

brass with the blue case looks ugly
Show Image



damn it i shouldn't have seen those pictures...
« Last Edit: Fri, 03 February 2017, 20:52:17 by beamingrobot »
456GT | TGR Jane | TGR 910 | Duck Blackbird | LZ CLS | Novatouch | Fjell | X60 | M10A

monokei