[GB] TGR-910 CE - 100% Completed.

[nickysan92]

Totally okay with the changes, so hit me up with an invoice whenever it's ready

[futurecrime]

**Week 17 update**
All the parts are with me already, it's slower than what I promised, but things are going a lot faster and smoother this time. CNC finished in around 10 weeks times, and it only takes 3 weeks for the anodising.Went through about 1/3 of the parts last night. Everything seems fine, no dents or any scratches. Anodising is good except for the grey ones, which turn out a lot lighter than what I expected. And all kits will be shipped with the Unicorn 1.2 PCB that I designed instead of ver 1.1. I should be able to have everything shipped before the lunar new year.

This is difficult but it has to say, unfortunately. The exchange rate of USD against Ringgit Malaysia has dropped from 4.3 to 3.8, that was something that I neglected largely when I working on my costing. There are some increase in cost that I decided later such as I should opt for CNC milling for the brass plate instead of conventional laser cutting. Also some addtional cost per unit for the anodizing to speed up the process.

Ultimately, I am very sorry for these unseen circumstances. I would add another 45$ in shipping invoices. I understand that it's unfair to increase the price now, if you are having second thoughts, please send me a PM. Breaking even is something I'd be happy to achieve, not even considering profits at the moment.

Again, very sorry and much appreciated for your kind understanding.

No worries about the price increase, **** happens. Out of curiosity, what made you decide to get the brass plates milled rather than laser cut?

[catweewee]

**Week 17 update**
All the parts are with me already, it's slower than what I promised, but things are going a lot faster and smoother this time. CNC finished in around 10 weeks times, and it only takes 3 weeks for the anodising.Went through about 1/3 of the parts last night. Everything seems fine, no dents or any scratches. Anodising is good except for the grey ones, which turn out a lot lighter than what I expected. And all kits will be shipped with the Unicorn 1.2 PCB that I designed instead of ver 1.1. I should be able to have everything shipped before the lunar new year.

This is difficult but it has to say, unfortunately. The exchange rate of USD against Ringgit Malaysia has dropped from 4.3 to 3.8, that was something that I neglected largely when I working on my costing. There are some increase in cost that I decided later such as I should opt for CNC milling for the brass plate instead of conventional laser cutting. Also some addtional cost per unit for the anodizing to speed up the process.

Ultimately, I am very sorry for these unseen circumstances. I would add another 45$ in shipping invoices. I understand that it's unfair to increase the price now, if you are having second thoughts, please send me a PM. Breaking even is something I'd be happy to achieve, not even considering profits at the moment.

Again, very sorry and much appreciated for your kind understanding.

No worries about the price increase, **** happens. Out of curiosity, what made you decide to get the brass plates milled rather than laser cut?

Milling plates give cleaner cuts and you avoid the possibility of laser burn marks. Theres quite a noticeable difference.

[futurecrime]

**Week 17 update**
All the parts are with me already, it's slower than what I promised, but things are going a lot faster and smoother this time. CNC finished in around 10 weeks times, and it only takes 3 weeks for the anodising.Went through about 1/3 of the parts last night. Everything seems fine, no dents or any scratches. Anodising is good except for the grey ones, which turn out a lot lighter than what I expected. And all kits will be shipped with the Unicorn 1.2 PCB that I designed instead of ver 1.1. I should be able to have everything shipped before the lunar new year.

This is difficult but it has to say, unfortunately. The exchange rate of USD against Ringgit Malaysia has dropped from 4.3 to 3.8, that was something that I neglected largely when I working on my costing. There are some increase in cost that I decided later such as I should opt for CNC milling for the brass plate instead of conventional laser cutting. Also some addtional cost per unit for the anodizing to speed up the process.

Ultimately, I am very sorry for these unseen circumstances. I would add another 45$ in shipping invoices. I understand that it's unfair to increase the price now, if you are having second thoughts, please send me a PM. Breaking even is something I'd be happy to achieve, not even considering profits at the moment.

Again, very sorry and much appreciated for your kind understanding.

No worries about the price increase, **** happens. Out of curiosity, what made you decide to get the brass plates milled rather than laser cut?

Milling plates give cleaner cuts and you avoid the possibility of laser burn marks. Theres quite a noticeable difference.

That's what I assumed but a quick Google seemed to be saying the opposite, which confused me. Good to have that cleared up, cheers.

[oatmicro]

I'm totally fine with the price increase becuase it's not something that you can control.

And I hope everyone will understand that as well.

[Mr_BeastQuake]

**Week 17 update**
Everything seems fine, no dents or any scratches.

Praise Jesus

[finalarcadia]

Feel free to send the lighter shade of grey, looks great as well anyway. Or pink if you received my message about color change Don't think anyone will mind paying a little extra for this great board. Good job Yuktsi.

Sent from my SM-G950U using Tapatalk

[LDobler]

How does this grey shade compare to the grey shade of the TRIS numpad? :x

Other than that paying more is fine with me

[darkslay3r]

that grey is nice too, although yuktsi said it's a failure but it looks nice

[ihalatch]

Hi Yuktsi, I've just pmed you.

[Puddsy]

sent you PM regarding shipping

[yuktsi]

How does this grey shade compare to the grey shade of the TRIS numpad? :x

Other than that paying more is fine with me

It's actually lighter than the Tris grey, I will see what I can do with your units.

[captainish]

I'm fine with the price increase. Looking forward to my invoice 

[SixtyLife]

also fine w the increase. the lighter grey looks good to me as well, but would like to see some better pics of it

[Mr_BeastQuake]

Original plan was to use Dolch with grey case. Am going to use GMK Originative instead since grey turned out a bit lighter. It will also be my first Zilent keyboard. Let us pray it ships before Lunar New Year or face the wait.

[Puddsy]

Original plan was to use Dolch with grey case. Am going to use GMK Originative instead since grey turned out a bit lighter. It will also be my first Zilent keyboard. Let us pray it ships before Lunar New Year or face the wait.

dolch would probably look better with the lighter grey, but if you have both just try em both

[oisw]

No issue with the increase and excited to see the grey!

[yuktsi]

Invoices are going are out. US orders are shipping out in the next few days. I will take more photos of each color as I pack tmr.

Thank you guys for understanding the increase in cost. Cheers.

[Shoah]

Invoices are going are out. US orders are shipping out in the next few days. I will take more photos of each color as I pack tmr. Cheers.

Great to hear! Im extremely excited.

[yuktsi]

Invoices are going are out. US orders are shipping out in the next few days. I will take more photos of each color as I pack tmr. Cheers.

Great to hear! Im extremely excited.

Me too! I have about 1/3 more to check, hope not dents like the last round.

[Shoah]

Invoices are going are out. US orders are shipping out in the next few days. I will take more photos of each color as I pack tmr. Cheers.

Great to hear! Im extremely excited.

Me too! I have about 1/3 more to check, hope not dents like the last round.

Fingers crossed. 🤞🏻

[dblack]

Invoices are going are out. US orders are shipping out in the next few days. I will take more photos of each color as I pack tmr.

Thank you guys for understanding the increase in cost. Cheers.

Ayy awesome

[finalarcadia]

Excited for my first TGR

Sent from my SM-G950U using Tapatalk

[futurecrime]

[Pragmatizm]

Invoices are going are out. US orders are shipping out in the next few days. I will take more photos of each color as I pack tmr.

Thank you guys for understanding the increase in cost. Cheers.

I havent gotten an invoice for the additional charges. Have they gone out?

[Shoah]

Invoices are going are out. US orders are shipping out in the next few days. I will take more photos of each color as I pack tmr.

Thank you guys for understanding the increase in cost. Cheers.

I havent gotten an invoice for the additional charges. Have they gone out?

I haven't either, hes probably just not finished yet.

[dblack]

Invoices are going are out. US orders are shipping out in the next few days. I will take more photos of each color as I pack tmr.

Thank you guys for understanding the increase in cost. Cheers.

I havent gotten an invoice for the additional charges. Have they gone out?

I haven't either, hes probably just not finished yet.

I don't think any have gone out, probs gonna finish checking the boards like he said.

[darkslay3r]

Just calm everyone, i’m very sure he need to manage many packages and also he’s working alone. Tmr maybe all invoices will spread. Haih i also want to hold my CE ASAP.


Sent from my iPhone using Tapatalk

[avid]

Also fine with increase. Looking forward to this one!!

[breckstar]

Just got an invoice! Paid up and hyped.

[yuktsi]

Invoices had been sent to all US orders. Do select the right shipping address before you pay.

CE Grey vs R1 Grey


Some of the packed boards.


I am having a day off tomorrow, will invoice more as I pack. My target is to having everything shipped before the 16th Feb, if not most. I'm going to take more photos tomorrow when there's natural sunlight, especially for the grey.

Cheers.

[Sissy]

I really like the lighter Grey, it looks good with the brass plate.

[yuktsi]

I really like the lighter Grey, it looks good with the brass plate.

It's actually much closer to the color of titanium, which is something that I've been wanting to do since the R1 Jane.

[Mr_BeastQuake]

I got the grey because the dark grey in R1 was outstanding, so I am curious to see the lighter grey in different light. The grey in this round seems to have a brown tinge but I'm guessing that is just the lighting. Am excited to receive board.

[Sissy]

I really like the lighter Grey, it looks good with the brass plate.

It's actually much closer to the color of titanium, which is something that I've been wanting to do since the R1 Jane.

Titanium is a colour I like and if True I'm super excited to see in person when I get mine.

[vtachkov]

Received the invoice Sent a PM to you Yuktsi.

[Mr_BeastQuake]

I really like the lighter Grey, it looks good with the brass plate.

It's actually much closer to the color of titanium, which is something that I've been wanting to do since the R1 Jane.

Missed this in my previous comment. This is indeed interesting.

[lunr]

I really like the lighter Grey, it looks good with the brass plate.

Same. I actually quite like the color now. Works well with OG keycap colours.

[Puddsy]

got shipping invoice, for anyone waiting

[vegs]

hype

[Mr_BeastQuake]

Dem pics?

[yuktsi]

The color is pretty close to the titanium clip on my pen.

[dgneo]

Show Image

The color is pretty close to the titanium clip on my pen.

beautiful

[Mr_BeastQuake]

Show Image

The color is pretty close to the titanium clip on my pen.

yess... Yessss.... YEEESSSS.

Also nice pen Yuktsi. Danks for photo

[Shoah]

Show Image

The color is pretty close to the titanium clip on my pen.

Thats silver tho right? Not the grey one?

[Mr_BeastQuake]

Show Image

The color is pretty close to the titanium clip on my pen.

Thats silver tho right? Not the grey one?

There was no silver option. This is the grey one that was stated came out looking like titanium. Thus, comparison to titanium pen.

[darkslay3r]

Show Image

The color is pretty close to the titanium clip on my pen.

Thats silver tho right? Not the grey one?

There was no silver option. This is the grey one that was stated came out looking like titanium. Thus, comparison to titanium pen.

There is no silver option but i believe someone will have it


Sent from my iPhone using Tapatalk

[Mr_BeastQuake]

Show Image

The color is pretty close to the titanium clip on my pen.

Thats silver tho right? Not the grey one?

There was no silver option. This is the grey one that was stated came out looking like titanium. Thus, comparison to titanium pen.

There is no silver option but i believe someone will have it


Sent from my iPhone using Tapatalk

There’s always some options that weren’t advertised but for clarity’s sake, that photo is of the widely available grey option and not silver.

[romevi]

Show Image

The color is pretty close to the titanium clip on my pen.

Aww, yes. Ti2 Techliner bros.  :cool:

[cmd]

Show Image

The color is pretty close to the titanium clip on my pen.

Coincidence that 69 is used on the packaging? Please explain Sam