Author Topic: [IC] LZ CLS s × h (Read 58805 times)

Puddsy · « **Reply #150 on:** Mon, 11 December 2017, 02:16:38 »

Quote from: poolside on Mon, 11 December 2017, 01:56:47

Quote from: LifeZ on Sun, 10 December 2017, 21:03:44
It starts in Jan. 2018

case n keyblock 3 or 4 colors
Switch plate 3 colors and PC

Will there be stainless steel as a plate option too?

it says in the first post, STS is stainless steel

mech0nly · « **Reply #151 on:** Mon, 11 December 2017, 05:17:09 »

Quote from: LifeZ on Sun, 10 December 2017, 23:18:25

Quote from: mech0nly on Sun, 10 December 2017, 21:31:12
considering an alps build, will alps plate DXF be provided?

Thanks LZ ^^

I will try. but only STS plate
only dell at101 winkeyless and winkey.

Interesting enough, i'll start consider it

ok2094 · « **Reply #152 on:** Mon, 11 December 2017, 07:06:48 »

Quote from: LifeZ on Sun, 10 December 2017, 20:56:33

Quote from: ok2094 on Sun, 10 December 2017, 15:52:31
Will there be a top part with the WKL blockers already on?
Also is there an option for no anodizing?

top part with 2 type, Normal and HHKB style,
anodizing option around 4, black, silver, red and no anodizing.

Aw, okay. I'm still looking for a nice WKL 60%.

mastercheif116 · « **Reply #153 on:** Mon, 11 December 2017, 08:23:41 »

Quote from: ok2094 on Mon, 11 December 2017, 07:06:48

Aw, okay. I'm still looking for a nice WKL 60%.

Right there with you. This case is gorgeous, but I am not sure if I can justify the cost for non-attached WKL blockers. Considering HHKB just cause it looks so damn good

Unforgivable · « **Reply #154 on:** Mon, 11 December 2017, 10:33:00 »

Quote from: LifeZ on Sun, 10 December 2017, 20:56:33

Quote from: ok2094 on Sun, 10 December 2017, 15:52:31
Will there be a top part with the WKL blockers already on?
Also is there an option for no anodizing?

top part with 2 type, Normal and HHKB style,
anodizing option around 4, black, silver, red and no anodizing.

RED?!? Thank you, LZ! Thank you!!!!!! Will grey be the 4th anode option?

aaron6301 · « **Reply #155 on:** Mon, 11 December 2017, 21:02:19 »

In for a red 60% with additional blockers

energyd · « **Reply #156 on:** Mon, 11 December 2017, 22:33:03 »

Red is nice, i'd definitely consider it, but we need someone to make a nice navy blue 60% already

. Nautilus with some navy and some brass would look CLEAN.
[/quote]

Yes, navy blue pls. Like this: https://imgur.com/a/2dTps

kmba · « **Reply #157 on:** Tue, 12 December 2017, 08:46:36 »

navy blue!!!

CommonCurt · « **Reply #158 on:** Tue, 12 December 2017, 09:27:04 »

+1 for Navy Blue

poolside · « **Reply #159 on:** Tue, 12 December 2017, 16:21:50 »

Quote from: Puddsy on Mon, 11 December 2017, 02:16:38

Quote from: poolside on Mon, 11 December 2017, 01:56:47
Quote from: LifeZ on Sun, 10 December 2017, 21:03:44
It starts in Jan. 2018

case n keyblock 3 or 4 colors
Switch plate 3 colors and PC

Will there be stainless steel as a plate option too?

it says in the first post, STS is stainless steel

Thanks, I got worried when I did not see the usual STS along the other options in that post.

Darknight00z · « **Reply #160 on:** Tue, 02 January 2018, 11:43:36 »

Quote from: get_weird on Wed, 15 November 2017, 00:44:09

Is there an option for an acrylic diffuser in this kit?

Any confirmation on this?

LifeZ · « **Reply #161 on:** Wed, 03 January 2018, 01:34:17 »

Quote from: Darknight00z on Tue, 02 January 2018, 11:43:36

Quote from: get_weird on Wed, 15 November 2017, 00:44:09
Is there an option for an acrylic diffuser in this kit?

Any confirmation on this?

Sure. confirmed

DJSwayde · « **Reply #162 on:** Wed, 03 January 2018, 05:42:26 »

Quote from: LifeZ on Wed, 03 January 2018, 01:34:17

Quote from: Darknight00z on Tue, 02 January 2018, 11:43:36
Quote from: get_weird on Wed, 15 November 2017, 00:44:09
Is there an option for an acrylic diffuser in this kit?

Any confirmation on this?

Sure. confirmed

Oh dang, this just got way better.

LifeZ · « **Reply #163 on:** Wed, 03 January 2018, 07:50:57 »

pretty

)

MajorKoos · « **Reply #164 on:** Wed, 03 January 2018, 09:53:25 »

Quote from: LifeZ on Wed, 03 January 2018, 07:50:57

pretty )
(Attachment Link)

Very cool

Looks different to your usual "LZ" makers mark - are you changing your branding?

Puddsy · « **Reply #165 on:** Wed, 03 January 2018, 12:02:19 »

Quote from: LifeZ on Wed, 03 January 2018, 07:50:57

pretty )
(Attachment Link)

i'll buy these right now if you'll let me

ihalatch · « **Reply #166 on:** Thu, 04 January 2018, 04:36:26 »

Quote from: Puddsy on Wed, 03 January 2018, 12:02:19

Quote from: LifeZ on Wed, 03 January 2018, 07:50:57
pretty )
(Attachment Link)

i'll buy these right now if you'll let me

I'll buy them too. Are they available for sale? Can we get some with our LZ CLSm GB?

BOK · « **Reply #167 on:** Thu, 04 January 2018, 04:39:29 »

Quote from: LifeZ on Wed, 03 January 2018, 07:50:57

pretty )
(Attachment Link)

I will..

cocobrais · « **Reply #168 on:** Thu, 04 January 2018, 05:04:53 »

Quote from: LifeZ on Wed, 03 January 2018, 07:50:57

pretty )
(Attachment Link)

hey bro....beaitiful. I will soon.

avid · « **Reply #169 on:** Thu, 04 January 2018, 06:53:55 »

LZ Keycaps

LifeZ · « **Reply #170 on:** Thu, 04 January 2018, 07:57:40 »

Quote from: ihalatch on Thu, 04 January 2018, 04:36:26

Quote from: Puddsy on Wed, 03 January 2018, 12:02:19
Quote from: LifeZ on Wed, 03 January 2018, 07:50:57
pretty )
(Attachment Link)

i'll buy these right now if you'll let me

I'll buy them too. Are they available for sale? Can we get some with our LZ CLSm GB?

It is just rendering.
Contact gmk.

futurecrime · « **Reply #171 on:** Thu, 04 January 2018, 08:19:49 »

Quote from: LifeZ on Thu, 04 January 2018, 07:57:40

Quote from: ihalatch on Thu, 04 January 2018, 04:36:26
Quote from: Puddsy on Wed, 03 January 2018, 12:02:19
Quote from: LifeZ on Wed, 03 January 2018, 07:50:57
pretty )
(Attachment Link)

i'll buy these right now if you'll let me

I'll buy them too. Are they available for sale? Can we get some with our LZ CLSm GB?

It is just rendering.
Contact gmk.

Lolzone

)

Puddsy · « **Reply #172 on:** Thu, 04 January 2018, 10:16:51 »

Quote from: LifeZ on Thu, 04 January 2018, 07:57:40

Quote from: ihalatch on Thu, 04 January 2018, 04:36:26
Quote from: Puddsy on Wed, 03 January 2018, 12:02:19
Quote from: LifeZ on Wed, 03 January 2018, 07:50:57
pretty )
(Attachment Link)

i'll buy these right now if you'll let me

I'll buy them too. Are they available for sale? Can we get some with our LZ CLSm GB?

It is just rendering.
Contact gmk.

LZ PLS

avid · « **Reply #173 on:** Thu, 04 January 2018, 10:23:50 »

Will you consider doing keycap with this logo too in same color scheme?

LifeZ · « **Reply #174 on:** Sun, 07 January 2018, 00:36:43 »

What is your favorite 60% pcb?

amnesia0287 · « **Reply #175 on:** Sun, 07 January 2018, 00:40:12 »

Quote from: LifeZ on Sun, 07 January 2018, 00:36:43

What is your favorite 60% pcb?

If I get one, 100% chance I will TRY to use a Zeal60. The new ones with the black edge and gold ports look sooooooo nice. Plus RGB and QMK. I think with the gold port it's gonna look the best. But I also get that not everyone wants $120 pcbs

.

pixelpusher · « **Reply #176 on:** Sun, 07 January 2018, 00:41:11 »

Quote from: LifeZ on Sun, 07 January 2018, 00:36:43

What is your favorite 60% pcb?

I really like the simplicity and build quality of the GON Nerd60

amnesia0287 · « **Reply #177 on:** Sun, 07 January 2018, 00:47:19 »

Quote from: reececonrad on Sun, 07 January 2018, 00:41:11

Quote from: LifeZ on Sun, 07 January 2018, 00:36:43
What is your favorite 60% pcb?

I really like the simplicity and build quality of the GON Nerd60

I won't lie, I was tempted to pick up a gon PCB, but I can't do my layout without QMK, and $70 is a lot if I'm just gonna nuke the boot loader. Plus if I wanted LEDs I'd have to figure out how to smd. They do look nice. I just use a few multiuse keys that I can't really reproduce in other firmware.

pixelpusher · « **Reply #178 on:** Sun, 07 January 2018, 00:52:55 »

Quote from: Amnesia on Sun, 07 January 2018, 00:47:19

Quote from: reececonrad on Sun, 07 January 2018, 00:41:11
Quote from: LifeZ on Sun, 07 January 2018, 00:36:43
What is your favorite 60% pcb?

I really like the simplicity and build quality of the GON Nerd60

I won't lie, I was tempted to pick up a gon PCB, but I can't do my layout without QMK, and $70 is a lot if I'm just gonna nuke the boot loader. Plus if I wanted LEDs I'd have to figure out how to smd. They do look nice. I just use a few multiuse keys that I can't really reproduce in other firmware.

You could try a b.face. I haven't personally tried one yet, but I really like my B.87 by winkeyless and I assume it would be the same quality. It uses bootmapper client, and it's pretty darn easy to set up multi-function keys.

You can do just about anything with bootmapper client

ricyuyc · « **Reply #179 on:** Sun, 07 January 2018, 01:12:22 »

I vote for NerD 60 for better quality. I know QMK do have particular function the other not, I would pick a ordinary GH60 rev.c if one day I find that I need QMK much.

CommonCurt · « **Reply #180 on:** Sun, 07 January 2018, 02:07:45 »

Quote from: LifeZ on Sun, 07 January 2018, 00:36:43

What is your favorite 60% pcb?

I vote NerD60 also. Great quality, and extremely easy to program.

amnesia0287 · « **Reply #181 on:** Sun, 07 January 2018, 02:11:57 »

Quote from: reececonrad on Sun, 07 January 2018, 00:52:55

Quote from: Amnesia on Sun, 07 January 2018, 00:47:19
Quote from: reececonrad on Sun, 07 January 2018, 00:41:11
Quote from: LifeZ on Sun, 07 January 2018, 00:36:43
What is your favorite 60% pcb?

I really like the simplicity and build quality of the GON Nerd60

I won't lie, I was tempted to pick up a gon PCB, but I can't do my layout without QMK, and $70 is a lot if I'm just gonna nuke the boot loader. Plus if I wanted LEDs I'd have to figure out how to smd. They do look nice. I just use a few multiuse keys that I can't really reproduce in other firmware.

You could try a b.face. I haven't personally tried one yet, but I really like my B.87 by winkeyless and I assume it would be the same quality. It uses bootmapper client, and it's pretty darn easy to set up multi-function keys.

You can do just about anything with bootmapper client

I should be more clear. I have multifunction COMBO keys.

I setup 2 FN keys, either 1 can access a layer, but if I use both, I get a totally different layer. There are ways to KINDA do this just be having FN keys to other layers in your fn layers, but it never works quite right.

For me I setup 3 layers, the base layer, 1 layer that is accessible using EITHER fn key, and a 3rd layer than is accessed using both. There is no way I'm aware of to do this with any other firmware. So if a board can't use QMK I probably won't use it.

Vadurr · « **Reply #182 on:** Sun, 07 January 2018, 03:02:53 »

Quote from: LifeZ on Sun, 07 January 2018, 00:36:43

What is your favorite 60% pcb?

Either Bface or Zeal60

OracleKev · « **Reply #183 on:** Sun, 07 January 2018, 03:20:05 »

Quote from: Amnesia on Sun, 07 January 2018, 02:11:57

Quote from: reececonrad on Sun, 07 January 2018, 00:52:55
Quote from: Amnesia on Sun, 07 January 2018, 00:47:19
Quote from: reececonrad on Sun, 07 January 2018, 00:41:11
Quote from: LifeZ on Sun, 07 January 2018, 00:36:43
What is your favorite 60% pcb?

I really like the simplicity and build quality of the GON Nerd60

I won't lie, I was tempted to pick up a gon PCB, but I can't do my layout without QMK, and $70 is a lot if I'm just gonna nuke the boot loader. Plus if I wanted LEDs I'd have to figure out how to smd. They do look nice. I just use a few multiuse keys that I can't really reproduce in other firmware.

You could try a b.face. I haven't personally tried one yet, but I really like my B.87 by winkeyless and I assume it would be the same quality. It uses bootmapper client, and it's pretty darn easy to set up multi-function keys.

You can do just about anything with bootmapper client

I should be more clear. I have multifunction COMBO keys.

I setup 2 FN keys, either 1 can access a layer, but if I use both, I get a totally different layer. There are ways to KINDA do this just be having FN keys to other layers in your fn layers, but it never works quite right.

For me I setup 3 layers, the base layer, 1 layer that is accessible using EITHER fn key, and a 3rd layer than is accessed using both. There is no way I'm aware of to do this with any other firmware. So if a board can't use QMK I probably won't use it.

Just curious, why set up like this?

BTW, I used to use multirole key (single and combo doing different actions). Had to give up as it limited keyboard choices.
On keyboards with certain layouts, I have FN key set up to cycle through layers. Just FYI.

LifeZ · « **Reply #184 on:** Sun, 07 January 2018, 06:30:18 »

I am trying to exclude PCB from CLS s x h.
Because there are various PCBs, we want individual to choose according to preference.

What do you think?

MajorKoos · « **Reply #185 on:** Sun, 07 January 2018, 07:38:46 »

Quote from: LifeZ on Sun, 07 January 2018, 06:30:18

I am trying to exclude PCB from CLS s x h.
Because there are various PCBs, we want individual to choose according to preference.

What do you think?

Works for me.
That bluetooth pcb you were testing looked interesting too 😉

DJSwayde · « **Reply #186 on:** Sun, 07 January 2018, 09:25:25 »

Is there ISO compatibility with the plate?

get_weird · « **Reply #187 on:** Sun, 07 January 2018, 10:51:14 »

Idk if this is the right place to talk about this, but I saw some intriguing renders by LZ on kbdlab. Are we possibly getting a new design or is it simply a render? I’m hoping it’s the former

LifeZ · « **Reply #188 on:** Sun, 07 January 2018, 18:14:05 »

Quote from: DJSwayde on Sun, 07 January 2018, 09:25:25

Is there ISO compatibility with the plate?

sure. ISO compatibility with the plate

Darknight00z · « **Reply #189 on:** Thu, 11 January 2018, 09:01:46 »

Any updates on when in Jan is the GB happening? My money is ready!!

kconfire · « **Reply #190 on:** Thu, 11 January 2018, 09:32:44 »

I hope the GB would remain open for a while! Have too much money to spend here and there as of late

Edit: @LZ, when do you think we will have this GB open and how long do you intend to leave it open?

I would like the GB end date to be a bit after mid February but I can only hope...

kconfire · « **Reply #191 on:** Thu, 11 January 2018, 13:23:43 »

Quote from: ricyuyc on Sun, 07 January 2018, 01:12:22

I vote for NerD 60 for better quality. I know QMK do have particular function the other not, I would pick a ordinary GH60 rev.c if one day I find that I need QMK much.

How does NerD60 compare to GH60 and Zeal60?

LifeZ · « **Reply #192 on:** Fri, 12 January 2018, 02:15:05 »

I will wait for GB approval tonight.

lanyusea · « **Reply #193 on:** Fri, 12 January 2018, 02:35:09 »

Quote from: LifeZ on Fri, 12 January 2018, 02:15:05

I will wait for GB approval tonight.

Vadurr · « **Reply #194 on:** Fri, 12 January 2018, 03:24:50 »

Hey LZ, how tall will the case measure in the front? Hopefully something like 20mm?

cocobrais · « **Reply #195 on:** Fri, 12 January 2018, 06:08:02 »

Quote from: LifeZ on Fri, 12 January 2018, 02:15:05

I will wait for GB approval tonight.

Good! Bro.♥♥

LifeZ · « **Reply #196 on:** Fri, 12 January 2018, 06:37:55 »

Quote from: Vadurr on Fri, 12 January 2018, 03:24:50

Hey LZ, how tall will the case measure in the front? Hopefully something like 20mm?

Yes. Around 20mm without bumpons

LifeZ · « **Reply #197 on:** Fri, 12 January 2018, 07:12:40 »

Quote from: cocobrais on Fri, 12 January 2018, 06:08:02

Quote from: LifeZ on Fri, 12 January 2018, 02:15:05
I will wait for GB approval tonight.
Good! Bro.♥♥

Awaiting Approval

avid · « **Reply #198 on:** Fri, 12 January 2018, 07:34:27 »

Quote from: LifeZ on Fri, 12 January 2018, 07:12:40

Quote from: cocobrais on Fri, 12 January 2018, 06:08:02
Quote from: LifeZ on Fri, 12 January 2018, 02:15:05
I will wait for GB approval tonight.
Good! Bro.♥♥

Awaiting Approval

Any info on price / how many available?

kconfire · « **Reply #199 on:** Fri, 12 January 2018, 08:24:56 »

Can't wait..............................!

News:

Author Topic: [IC] LZ CLS s × h (Read 58805 times)